Sludge pump

Warman® AH 4/3

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel Cv9E28W2 - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: excellent (used), TOX® Column Press Series MA Robust 4-column press with optimal load distribution over the entire clamping surface and minimal symmetrical bending. Series MA TOX® 4-column press Type: MA 08.04 Max. load capacity: 80 kN (approx. 8.2 tons - weight of press: 99 kg , weight of ram: 52 kg Cirmbzq3L7 TOX®-Powerpackage Type K 10 bar and 6 bar Type: K 8. 51. 100. 5 with compressed air max. pressing force with compressed air: 6 bar – 45.2 kN — 10 bar – 78.4 kN Rapid force at 10 bar daN: 454 Restoring force at 10 bar daN: 553 Total stroke: 100 mm Power stroke: 5 mm Passage between the columns: 226 mm Installation height: 135 mm Dimensions: 350 x 400 x 1050 mm (wxdxh) Total weight: 210 kg The machine is in very good condition. Press is sold without warranty.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors Dmdigp - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: used, Year of construction: 1997, max. straightening capacity 40 kN centre distance 750 mm centre height 160 mm Beivvtm stroke 80 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Mileage: 70,000 km, Power: 184 kW (250.17 HP), First registration: 12/2019, Overall weight: 11,990 kg, Fuel type: diesel, Color: white, Axe configuration: 2 axles, Gearing type: automatic, Emission class: euro6, Condition: used, Equipment: Abs, Air Conditioning, Electronic Stability Program (Esp), We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! Ubgsii9Wip MAN TGL 12.250 with Meiller 3-sided tipper 12 SPEED AUTOMATIC ! air condition 3 seater Glazed rear wall AHK ball AHK jaw Hydraulics for trailers Radio Track assistant Work light Rotating beacon Differential lock 6 x new TIRES !!! SERVICE NEW !!! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to make you a LEASING-MIET BUY or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Mileage: 500 km, Power: 353 kW (479.95 HP), Overall weight: 32,000 kg, Fuel type: diesel, Color: white, Axe configuration: > 3 axles, Brakes: retarder, Gearing type: automatic, Emission class: euro6, Loading space volume: 13 m³, Loading space width: 2,420 mm, Loading space length: 5,800 mm, Loading space height: 900 mm, Condition: new, Equipment: Abs, Air Conditioning, For inquiries about the vehicle, please contact Mr. Seidel (under Tel. gladly.---- Iveco X-Way AD360X48Z HR OFF 8x4 Meiller three-way tipperper---- * !!! 2x PRESENT !!! * Bordmatik left * Intarder * Cursor II * Wheelbase 4.250 mm * Tires 315/80 R 22.5 * Driver's cab AD with flat roof * Fog lights * Electrically adjustable and heated mirrors * Storage compartment with 2 compartments rear wall * Electronic immobilizer * Air conditioning * Euro 6 E emissions standard * Mechanical battery disconnect switch on chassis, right-hand side * Hi-TroniX 12TX transmission * AdBlue tank, 50 liters * Trailer socket for 24 volt operation, 15-pin * 290 liter fuel tank, aluminum * Fuel pre-filter with separator, heatable * ECO-Roll transmission software (freewheel function) * Cruise control * VDI interface * Preparation for toll system (OBU) * Hill start assist (Hill Holder) * PTO NH/4C for pump, right-hand side * Rocking mode (free swing mode) * Lane Departure Warning System (LDWS) * Roof flap, mechanical version * Protective grille for headlights * Transparent sun visor * Driver's seat with air suspension, heatable * Horn behind bumper (compressed air) Ccxtffglq0 * Brake system design for permissible total mass 60 t * Rockinger trailer coupling, 50 mm, 200 kN * Iveco radio DAB+, Bluetooth * Electronic Stability Program (ESP) * Left-hand inspection panel * LED rear lights * Reversing warning beeper, can be switched off * Air suspension for cab---- * Body: Meiller D 421 * Dropside height: 900mm * Tipper body length: 5,800mm * Width: 2,420mm (pallet width version)---- * Bridge floor reinforced: 7mm ?VS 120(450 HBW) * Meiller mudguards made of aluminum checker plate throughout * Meiller load securing package (incl. ladder and lashing eyes) * Meiller pneumatic connection for tipping trailers with Duomatic coupling * Meiller rear and load compartment visibility package - rear compartment visibility package + load compartment camera (ec) mounted on the upper edge of the bulkhead + 2x LED work lights We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes and prior sale reserved !!!

Condition: used, Machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A IP55 208Pj2Ufj Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Mileage: 90,000 km, Power: 162 kW (220.26 HP), First registration: 08/2018, Overall weight: 7,490 kg, Fuel type: diesel, Gearing type: mechanical, Emission class: euro6, Loading space width: 2,300 mm, Loading space length: 3,600 mm, Loading space height: 400 mm, Condition: used, Number of seats: 3, Equipment: Abs, Air Conditioning, Central Locking, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! CLIMATE 6 cylinder ENGINE 2 x trailer hitch Hydraulics for AH Rotating beacons Differential lock 3 SEATS 2,315 KG PAYLOAD GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to provide you with a LEASING-MIET PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. Fz0Bskvl ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), Year of construction: 1994, Buckle plate folder Stahl Stahlfolder T 52/4- KB year of construction 1994 Format minimum 10 x 15 cm Maximum format 52 x 84 cm Flat pile feeder Fi with Tremat, side blowers and DCT control 4 buckle plates 52 cm with noise protection and cross fold Hook-in shingle delivery pressure-vacuum compressor Well maintained machine Bn0Q0C3Hfgk

Condition: used, Year of construction: 1973, Polygon lathe HAHN & KOLB type TORNOMAT 2 Machine # 668273 Year of manufacture 1973 Technical data: Working range hexagon 3 - 36 mm working range square 3 - 24 mm hydr. feed per revolution 0 - 0.5 mm Rapid traverse 3.7 m/min. Switching time 1.0 sec. Speed of the rotor 250 / 355 / 450 rpm. Byfriv02 Speed of the high-speed drilling spindle 2250 / 3200 / 4050 rpm. Drive power 2.2 / 1.5 kW Weight approx. 1300 kg External dimensions approx. 1850 x 1000 x 1220 mm With - Electrical control cabinet 750 x 400 x 950 mm, 100 kg - Conveyor belt used, in good condition for the economical quantity and series production of six-edges on of high strength, of square edges on tool shafts as well as of parallel surfaces on tool shanks as well as parallel surfaces on machine parts.

Year of construction: 1996, Condition: used, stroke height: mm work height max.: mm total power requirement: kW Lifting height: 2615 mm number of stations: 8 (Hubsäule) Stück lifting capacity: Max: 25000 pro Hubsäule (250 kN) kg stroke speed: 304 mm/min. track width: 750 mm control voltage: 24 V / DC V electrics - voltage/frequency: 400 / 50 V/Hz work pressure of hydraulic: bar Dpshjz motor capacity: 4,0 pro Hebebock (Hubantrieb) kW motor capacity: 0,37 pro Hebebock (Schwenkantrieb) kW machine weight approx.: 3300 / pro Hebebock kg dimensions LxWxH: L: 1,8 x B: 1,3 x H:4,95 pro Hebebock m LIFTING JACK SYSTEM - SPINDLE LIFTING JACK SYSTEM Application: Lifting rail vehicles, e.g. locomotives, motor cars or car bodies, so that maintenance and/or repair work can be carried out on their wheelsets or bogies, etc. Maintenance and/or repair work can be carried out. Suitable for indoor operation. The total load of the system is 1000 kN. It consists of eight individual jacks. Each lifting jack may be loaded with max. 250 kN. The working stroke is realized via a directly driven electric trapezoidal screw drive (Tr.80x16). Each lifting jack is equipped with a claw. Lifting jack functions can be set in ?single travel? at the lifting jack control point (control box + hand panel): Lifting/lowering operation; swivel downwards/upwards: move left/right Central operation of all eight lifting jacks via an electric control panel. Technical dimensions: -Lower/upper clamp position from lower edge of base plate: 385mm / 3000mm -horizontal clamp stroke: 780mm -max. Ground clearance of the chassis: approx. 15mm -Spindle output speed: 19 rpm. The eight lifting jacks are available for sale ready for transportation.

Year of construction: 1962, Condition: ready for operation (used), Machine/vehicle number: 62110, max. working width: 2040 mm for metal sheets up to: 4,5 mm opening width top clamping bar: 320 mm adjustment bending cheek: 120 mm clamping bar drive: 2,2 kW below cheek drive: 2,2 kW electrical connection: 5 kW weight: 3700 kg space needed: 3250 x 1000 x 1900 mm Bjr9Dflpeu

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm tool taper ISO 40 spindle turning speed range 20 - 5000 U/min Speed correction 80 - 120 % feeds 1.0 - 2000 mm/min quill stroke 50.0 mm table-size 800 x 355 mm T-slots 5x 26.0 mm Control HEIDENHAIN 124 rapid traverse X-axis 4.0 m/min rapid traverse Z-axis 4.0 m/min rapid traverse Y-axis 2.0 m/min Required air-pressure 6.0 - 7.0 bar solution in X-, Y- und Z-axis 0.001 mm Number of working hours 9.676 h voltage 380 V control voltage 110 V engine output 6.0 kW weight 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm from a training center ("Daimler Chrysler AG") Refurbished in 2006 for approx. 33.000 euros including new HEIDENHAIN "124" control very little used after general overhaul (!!) Operating hours - "machine ON" only: 9.676 hours - in checked condition - machine video - youtube.com/watch?v=i3R-yWrhU3w Equipment: - electric CNC universal tool milling machine - HEIDENHAIN TNC 124 path control (installed in 2007) * swiveling control panel, right front of the machine - electro-hydraulic tool changer - vertical milling head - ISO 40 with vertical work spindle * manual spindle feed .. 50.0 mm * scale ring for reading the quill adjustment - horizontal work spindle including counterholder - rapid traverse feed X-axis .. 0 - 4000 mm/min - rapid traverse feed Y-axis .. 0 - 2000 mm/min - rapid feed Z-axis .. 0 - 4000 mm/min - central lubrication, electric - pneumatic minimal spray device (lubrication system) - coolant device, including pump + collecting container - machine stand with foot - separate hydraulic system - original operating instructions + circuit diagram + acceptance report etc. Dplvbb

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours Dpkf2B - Machine light - Machine feet - Operation manual

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Sjn9Vn3 Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 • upright stack delivery with pressing SBP 66

Year of construction: 1981, Condition: good (used), Polygon lathe Polygon automatic lathe Manufacturer: Hahn + Kolb Type: TORNOMAT 2 Year of manufacture: 1981 Working range hexagon: 3 - 36 SW mm Working range square: 3 - 24 SW mm Maximum turning length: 60 mm Hydraulic feed per revolution: 0 - 0.5 mm Rotor speed: 250 / 335 / 450 rpm. Hydraulic pump: 23 l /min. Hydraulic system max. pressure: 45 bar Oil filling 36 cSt/50° C: 125 liters Motor for lubrication pump: 1000 min. -1 Weight without accessories: approx. 1300 kg Space requirement without control cabinet: 1530 x 670 mm ä12042024 Accessories Collets Cutter head B3Llzbxx2C ä08072024

Condition: used, Year of construction: 2002, Machine/vehicle number: 252110, Flat pile feeder: TREMAT Binhn0329Xh 4 buckle plates Shed delivery

Overall weight: 3,500 kg, Maximum load weight: 2,250 kg, Tire size: 13 Zoll, Condition: as good as new (ex-display), Machine/vehicle number: 23.363, Large exhibition in the Rhineland - 500 trailers in stock! Special action only with us! Model: HUMBAUR HTK 3500.41 Tridem three-axle steel sideboards E-pump + emergency pump (810b) HUMBAUR HTK 3500-41 Tridem Three-way tipper 3500 kg three-axle tridem with E-pump + emergency pump rail well, steel side walls as 3 AXLES 100 km/h equipment possible. - total weight: 3500 kg - Payload approx.: 2250 kg - Interior dimensions L x W x H mm: 4100 x 2100 x 350 - Tipping angle 45 - E-pump + emergency pump incl. - 3 - stage telescopic cylinder for maximum ground clearance - triple axle - safety V - drawbar - parking brake - overrun brake with automatic reversing system - Automatic heavy duty support wheel - high loader steel side walls - all sides open - solid, smooth steel floor for optimal skid resistance - 13 inch tires - loading flap at the rear - 13 pole plug - 2 years warranty - 2 years TÜV from first registration - 8 recessed lashing hooks on the loading area - loading edge 745 mm - all drop sides can be folded down and unhooked - professional support by dealer service interior dimensions L x W x H mm: 4100 x 2100 x 350 overall dimensions L x W x H mm: 5712 x 2280 x 1240 Ideal for the pampered user with high performance requirements! Seasonal offer remaining stock at Clemens & Partner. Financing without problems also without down payment. Why pay more elsewhere! Accessories available for an additional charge: - 100 km/h equipment double axle - 240,- Euro - 100 km/h equipment three-axle - 360,- Euro - spare wheel 195/50 R13 C - 140,- Euro - spare wheel holder universal - 60,- Euro - aluminum drop side divided - 280,- Euro Bgjnbmpweo2 - H-frame - 240,- Euro - Flat tarpaulin for drop side - 480,- Euro - Flat tarpaulin for grid/sheet top - 550,- Euro - Net for load securing - 60,- Euro - Tipper with steel side walls 350 mm - 270,- Euro - Aluminum side wall extension 350 mm - 990,- Euro - Aluminum sideboard extension 600 mm - 1.850,- Euro - Steel side wall extension - 1.350,- Euro - 2 telescopic crank supports - 240,- Euro - Steel grid top 600 mm - 1.240,- Euro - Steel grid top 1000 mm - 1.820,- Euro - aluminum sheet top 600 mm - 1.630,- Euro - Aluminum planks 2,8 t load capacity, 2650 mm - 760,- Euro - Battery charger - 140,- Euro - Anti-theft device depending on model 25,- to 35,- Euro - Adapter - 25,- Euro Accessories for self-assembly - ready assembled for an extra charge! More tippers in our large exhibition in stock. Experience a gigantic selection of quality and price in one of the largest trailer distributors in Germany with more than 500 trailers permanently in stock! Pictures may contain accessories subject to additional charge. BEST PRICES CLEMENS & PARTNER ELSDORF

Year of construction: 1989, Condition: used, Size max 360 x 650 mm 2Pkthvo7P min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Total length: 7,870 mm, Total width: 3,220 mm, Total height: 3,220 mm, ASAHI flatbed die cutter AP 1600 + 3 Color Flexo + Dücker Breaker Model: AP 1600 Cartonmaster Year of manufacture: 2002 3 Emba inking units Uezqbu37Kr including Dücker Breaker max. sheet size: 1090mm x 1600mm min. Sheet size: 450mm x 600mm max. punching format: 1080mm x 1600mm Closing frame inside dimensions: 1120mm x 1648mm min. Gripper margin: 10mm min. Punching force: 350 tons + Roda Prefeeder max. height of the stack: 2000mm max. weight of the stack: 1400kg min. Sheet size: 600 x 400mm max. sheet size: 1650 x 1270mm Machine length: 7150mm Machine length at floor: 3450mm Width machine: 3750mm Weight: 6300 kg

Condition: used, Year of construction: 1990, surface area 805 * 405 (x 340 ) mm no. of flutes 8 groove width 12 / x 45 mm Uei8Eegzix total power requirement 0 kW weight of the machine ca. 160 kg dimensions of the machine ca. ? m

Condition: defective spare-parts repository (used), Year of construction: 1995, Travel distance X-axis: 800 mm, Travel distance Y-axis: 650 mm, Travel distance Z-axis: 550 mm, CNC machining center DECKEL-MAHO type DMU 80 T Machine # 82992 year of construction 1995 with 4th controlled axis, made by Walther Bkv8Mw0Sbi0 Technical data: Table length 1100 mm Table width 650 mm Longitudinal travel X-axis 800 mm Transverse travel Y-axis 650 mm Vertical travel Z-axis 550 mm Number of tools in changer 25 Tool diameter 80 mm Max. tool length 315 mm Tool holder ISO 40 Spindle speed up to 6300 rpm Feed speed 1 - 15000 mm/min. rapid traverse 15 m/min. Total power requirement 29 kW Weight approx. 5500 kg Dimensions approx. 3100 x 2300 x 2500 mm with - HEIDENHAIN Millplus control - separate 4th controlled axis made by Walther - large work table - electronic handwheel - chip conveyor - approx. 15 tool holders defective, as spare parts carrier

Condition: good (used), Year of construction: 1999, LID MAHO DMC 103 V 3 axis vertical machining center year of construction 1999 Machine number 2886003702 Control HEIDENHAIN TNC 426 Travel X - 1,000 mm / Y - 600 mm / Z - 600 mm Equipment: Table size 1,200 mm x 600 mm Spindle SK 40 Speed 0-8,000 rpm Chip conveyor Coolant device RENISHAW measuring probe Electronic handwheel 1 set of tool holders Operating instructions We sell a total of 8 machines en bloc free loaded truck FCA D-95233 Helmbrechts. Machines partly in need of overhaul. 5 axes machining center AXA VHC-3-3000-M/2E Year 2002 / HEIDENHAIN iTNC 530 HSC 5-axis machining center RÖDERS RFM 1000/2-S Uex087O8Ix Built 2007 / Commissioned 2008 / RÖDERS RMS6 3 axes vertical machining center AXA VARIO-2-HSC Year 2003 / HEIDENHAIN iTNC 530 3 axes vertical BAZ DECKEL MAHO DMC 63 V Year 2001 / HEIDENHAIN TNC 426 3 axes vertical BAZ DECKEL MAHO DMC 70 V Year 1997 / HEIDENHAIN TNC 426PB 3 axes vertical BAZ AXA VARIO Year 2002 / HEIDENHAIN TNC 426M CNC tool milling machine DECKEL FP 4A Year 1991 / DIALOG 11 All other accessories shown in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Complete data - illustration, content and information without guarantee, therefore not binding - see "PDF". PACKAGE PRICE net 59.000 € FCA D-95233 Helmbrechts excluding packaging Delivery time immediately Subject to prior sale / payment immediately upon completion of purchase

Year of construction: 1999, Condition: used, Folding Machine: - round pile feeder - 4 folding buckles - 2 folding knives - noise reduction hoods Huwau30 - horizontal stack delivery SBP-M 46.D

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Gate-fold unit Csswq2Toh0 Available: at short term