Hydraulic press

Wanzke HVZ 160 S

Year of construction: 1998, Condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Bodkhhqaqt8

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Cpovhp2N Equipment: - 1x hydraulic unit - 2x control cabinets *

Year of construction: 1995, Condition: ready for operation (used), Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible. Ul7Hu0Qeh2

Year of construction: 2002, Condition: excellent (used), Item: AV-11964-Vertical 160m3 Silos Vertical insulated silos tank 160.000 L Exterior dimensions: Dia Ø 4120/4260 mm Total H 14000 mm Cylinder height 12500 mm. Identical, isolated silotanks - (2 pcs.) only 1 piece Isolated with 50 mm completed with stainles steel trapez plates. Flat sloaping bottom. Conisk top with ventilation/cip. Topmounted agitator. Jacket below at cylinder. Manhole. Cemalklxh3 Year 2002. Brand Randers Rustfri Stålindustri A/S AISI 316

Condition: reconditioned (used), WORKING CAPACITY: Max rectifiable length: 1.600 mm Max grindable width with 75 wide wheel: 575 mm Max rectifiable height: 450 mm Hw7Iyxptdj TABLE: Length of the fixing grooves: 2.000 mm Useful dimensions of the support surface: 1.600 x 500 mm Dimensions and center distance of the three T-slots: 14 x 160 mm Max longitudinal stroke: 1.680 mm Continuously adjustable speed: m/min 2 ÷ 35 GRINDSTONE: Normal dimensions (diam. x hole): 406 x 127 mm Maximum width: 75 mm Speed ​​with 50 Hz motor: 1.450 rpm Max transversal stroke: 500 mm Transversal advances in steps: 1 ÷ 10 mm Continuously adjustable transversal displacements: m/min 0.1 ÷ 6 Automatic vertical advances: 0.005 ÷ 0.05 mm VARIOUS: Net weight: 6.800 kg Dimensions: 3.960 x 1.720 x 2.540 mm

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 320 S-1, We offer for sale 3 pc. (together or separately) refurbished Knoll 320-S type of strap hinge conveyor, which are plants for transporting metal chips and small parts. Original used for Index V100 machines. Decentral use on individual and interlinked machine tools • Central use for waste disposal from machine groups and entire production areas • Suitable for long chips, chip balls, and wool chips • Suitable for wet and dry processing Functions: 1. Collection of the chips/parts 2. Transporting of the chips to the discharge point on the upper belt span Cxxzbzwm2M Additionally for wet processing 3. Collecting of the cooling lubricant 4. Separating of chips and cooling lubricant 5. Buffering of cooling lubricant 6. Transporting of the cooling lubricant for processing, return pumping station or machine Dimension and technical data in the attachement photos. It can optionally be equipped with an other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The KNOLL chip conveyors can be viewed at our site in Hungary at a pre-arranged time. If you are interested, we will provide you with additional information and pictures.

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 160 rpm -Power: 1.5 kW Bcbyhw2W20 -Construction: B3 -Shaft: Ø 25 x 80 mm -Protection class: IP 44 -Dimensions: 495/250/H295 mm -Weight: 43 kg

Condition: used, SKU : 343T928 Location : Barneveld Dps0Rd Make : Alexanderwerk Type : G 1/100 No. : 05132198 Year of construction : 2001 Main Features Motor : 4 KW Specified Features - Roll compactor Material : Stainless steel 1.4401 (316) Roll compactors Granulator : check Roll sizes : dia. 190x170 mm Number of dies available: : 1 Die perforation : 2 mm Number of press rolls : 1 Motor : 4,0 kW 230/400 Volt (Ex) With pre-mixer : check With motor : 0,37 kW With variable speed drive : 4,2-21 RPM Inlet : 440x380 mm Outlet : dia. 100 mm Mounted on frame : check With switchgear : check Weight : 820 kg CE : check Floorspace : 1,2x1,2 m Total height : 2,2 m ATEX compatible : check What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: ready for operation (used), Year of construction: 1991, Available immediately from location : Single-column drawing press WMW Zeulenroda Type PYE 160 S/ 1 M year of construction 1991 Pressure capacity 160 to Table 900 x 600 mm ram 450 x 750 mm Cz9O0Zgpya ram stroke max 500 mm projection 360 mm Distance table - ram max 800 mm Speed from 200 mm / s Speed down to 125 mm/s Die cushion pressure 63 to Maximum drawing depth 200 mm Drive 17 kw Weight 8500 kg At a price of Euro 5,500 plus VAT ex location

Condition: new, Year of construction: 2024, Extraction capacity approx. 5200 m3/h Motor power 3.0 kW Rotational speed 3000 rpm Rated voltage 400 V, 50 Hz Extraction port 250/200 mm Extraction speed 28 m/sec. Number of filters 28 Negative pressure 2800Pa Filter category G Polyester filter material Sound level 80 dB without connection / 65 dB when connected through The pipe to the machine Szjrd Filtration area 13.7 m2 Dimensions (L x W x H) 2000 x 750 x 1980 mm Weight 182 kg

Condition: excellent (used), Grundfos TPED 50-160 / 2-S AFA-BAQE APPLICATION AREAS - Heating systems - Local hot water supply systems - cooling and air conditioning systems FEATURES AND ADVANTAGES - Low power consumption - Correction according to the existing working conditions - Easy to install Technical data: Frequency of rotation 2900 rpm Nominal supply 17 m 3 / h Nominal head 12 m Max hydrostatic head 160 dm Shaft seal BAQE liquids: Working fluid water Fluid temperature range 0 ... 120 ° C temperament. Liquids 20 ° C density 998,2 kg / m 3 materials: Pump housing cast iron EN-JL1040 ASTM A48-40 B Impeller cast iron Bk7Nafbt3M EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Nominal power - P2 2 x 1.1 kW Industrial frequency 50 Hz Nominal voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos is a force characteristic 0.91-0.82 Nominal speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection Yes. Engine number 98362352 assembly: Maximum ambient temperature 50 ° C Max. working pressure 16 bar Max. Pressure at a given temperature 16 bar / 120 ° C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Mounting length 340 mm mm Motor flange size FF165 Net weight 95 kg

Condition: used, Year of construction: 1989, pressure 160 t throat 480 mm stroke fix fix 180 mm Brsnghu2C9E no. of strokes 25 - 70 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1100 x 900 mm Hole in the table 450 mm table height over floor 900 mm passage to the back 700 mm ram surface 900 x 600 mm ram adjustment 144 mm power requirement 30,75 kW weight 15,3 t dimensions (WxDxH) 2,0 x 2,4 x 3,75 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, FIX stroke, pneumatic clutch/brake combination (make Desch), hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Year of construction: 2012, operating hours: 4,799 h, Condition: used, power: 118 kW (160.44 HP), lifting height: 6,000 mm, mast type: duplex, construction height: 4,870 mm, fork length: 2,400 mm, engine type: 6-Zyl. Doosan-Diesel, drive type: Diesel, load capacity: 16,000 kg, Heavy-duty forklift truck - Diesel Load center: 600 Mast type: Duplex Condition: Reconditioned without warranty Technical condition: Very good Front tires type: Air Rear tires type: Air Description: Sideshift, tine adjuster, Br7Ilbygtou 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: excellent (used), Year of construction: 2014, ARISA SERVO TRANSFER PRESS Pressing force: 8,000 kN Table surface: 4,000 x 1,610 mm ram area: 4,000 x 1,610 mm Stroke: 400 mm Installation height: 1,101 mm E8Pdqov Ram adjustment: 200 mm Stroke rate: 0-70 rpm Year of construction: 2014 Transfer: Lifting stroke: 350 mm Feed path: 300 mm Max. Distance between the rails: 2,180 mm Min. distance between the rails: 670 mm

Condition: ready for operation (used), Year of construction: 1965, Available immediately from location : Hydraulic single column press WMW Zeulenroda Type PYE 160 S Broba9Vjl8E Year of construction 1965 General overhaul in 2006 Pressure capacity 160 tons Table 900 x 620 mm Distance table - ram 800 mm ram stroke 500 mm ram from rapid traverse 200 mm/s ram to 125 mm/s Drive 17.5 kw Weight 8.5 tons At a price of Euro 4,500 plus VAT ex location

Condition: new, Grinder Sind 160 mm Model: AG 160 S Holeplate diameter: 160 mm Hopper content: 400 liters Throughput depending on material type, speed, cutting set: 7000 kg/h 2-speed working worm and 3-speed feeding worm – independent Dimensions: 150x165x198cm Electric power: 33 kW Voltage: 380 V, 50 Hz Machine weight: 1600 kg E2Pnlwa

Year of construction: 2004, Condition: ready for operation (used), A hydraulic punching press from Janke is available together with an articulated handling robot from Fanuc. Press: Press force: 160t, rapid traverse: 100mm-300mm/s, working speed: 95mm/s, stroke: 800mm, hold-down cylinder stroke: 500mm, installation height: 1700mm, ram dimensions X/Y: 1000mm/600mm, table dimensions X/Y: 1150mm/650mm, weight: approx. 13000kg. Articulated arm robot: number of axes: 6, reach: approx. 2600mm, payload: 165kg, repeat accuracy: +/-0.3mm, weight: approx. 1400kg, control: Siemens R-J3. The feedback cover on axis 1 of the robot is broken. Documentation available. On-site inspection is possible. Dpf80X

Condition: good (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 351, cutting height (max.): 150 mm, overall weight: 250 kg, Pull and cross-cut saw made by Stegmaier Year of construction 1993 Maximum cutting height: approx. 150 mm Cutting depth: approx. 150 mm Bnru70P3Po With a cutting height of 40 mm, a maximum cutting maximum cutting depth of approx. 200 mm is possible. Saw is on pallet ready for immediate loading. Loading can be carried out free of charge.

Condition: used, Year of construction: 1993, pressure 160 t throat 400 mm stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm Qj7Wqdxe total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m The seals on the machine should be renewed.

Condition: new, Antistatischer Polyurethanschlauch für die Holzindustrie, leicht + schwerentflammbar TIMBERDUC® PUR 531 AS  FI 160 mm (Innen) Anwendungen:  Absauganlage, Entstaubungsanlage, Filteranlage, Ölnebelabsaugung; explosionsgefährdeter Bereich; Holzstaubabsaugung, Holzspäne: Holzindustrie, Möbelproduktion, Sägewerk; Holzstaubabsaugung: CNC-Maschine, CNC-Bearbeitungszentrum (besonders für sich schnell bewegende); Faltenbalg, Kompensator Eigenschaften:  leichte Ausführung; hochflexibel + stauchbar 4:1; abriebfest; mikrobenfest; gute Öl-, Benzin- und Chemikalienbeständigkeit; schwerentflammbar nach: DIN 4102-B1; Wandung permanent antistatisch.  Durchgangswiderstand und Oberflächenwiderstand < 10? ?; gemäß TRGS 727 und ATEX 2014/34/EU: zur Aspiration brennbarer Stäube (Zone 22 im Inneren), zum Fördern für nicht brennbare Flüssigkeiten, zum Einsatz in Zone 1 und 2 (Gase); erfüllt die Sicherheitsauflagen der deutschen Holz-BG; gemäß DIN 26057 Typ 1; RoHS konform Temperaturbereich:  -40CC bis 90CC; kurzzeitig bis 125CC Konstruktion, Werkstoff:  patentierter PROTAPE® Folienschlauch; in der Wandung eingebetteter Federstahldraht; Wandung: gegen aggressive Hölzer und Holzschutzmittel beständiges, permanentantistatisches Premium Polyurethan (Pre-PUR®); Wandstärke ca. 0,4 mm Zuschnittservice: Gebinde besteht aus maximal 10 Meter, wir schneiden auf Ihre Wunschlänge zu. Dno9U9 Bei Bestellmenge von 1 = 1 Meter Gemessen wird immer den Innendurchmesser!

Condition: used, Year of construction: 1993, used fan Motor 1,5 kW Speed 2800 rpm Crw88D0Fp7 Suction nozzle diameter 160 mm Air output max. 1800 m³/h Pressure max. 1800 Pa Availability: short term Storage location: Hochheim

Condition: excellent (used), Year of construction: 1990, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, ram stroke: 500 mm, type of input current: three-phase, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), PYE 160 S/1M hydraulic press. Year of production 1990, manufacturer VEB Wema Zeulenroda (Germany). Machine after a general overhaul. Parameters: Maximum pressing force 160 tons. Working pressure 16 MPa. Upper table 700 x 450 mm. Lower table 900 x 630 mm. Guxi2T03 Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 125 mm/sec. Power requirement 17 kW. Oil quantity in the tank 500 l. Weight 7000kg. Height 3450mm, length 2200mm, width 1250mm. Machine in very good condition. It is possible to make a visual inspection and check the machine in motion.

Year of construction: 2015, Condition: excellent (used), machine/vehicle number: K117, SWF / Böck&Spangenberg steel construction gantry crane crane Dimensions approx. 19.5 x 7.12m with bridge crane Payload/lifting capacity 5000 KG Technical data of the system: Crane runway/steel construction consisting of HEA160/280 girder Total crane height 6.15 m Top rails 5.4m UK rails 5.12m Upper bridge 5.74m UK bridge 4.67m Hook height 5.2m Track width 6.86 m 7Rpgong78Y Total width outer edge 7.12m Inner edge of steel construction 6.70m Base plate steel construction 28x20cm Support spacing 9.55+9.55m The system is delivered complete: HEA160 / HEA 280 steel construction with power supply 1 bridge with 5000 kg SWF cable from BJ 2015! Documents and test book are available Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: excellent (used), Here we offer you an Aermec chiller. Aermec WRL 026 chiller WRL is a water cooled heat pump water indoor installation Technical data cooling mode: Cooling capacity 6.60 kW Power consumption 1.40 kW EER 4.71 W/W In 3.10 A Imax 8.00 A Dimensions Height 1126 mm Width 1757 mm Depth 798 mm Weight 190 kg Type: WRL026 EA Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Px9S2 Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 194880707, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, swivel angle A-axis (min.): -15 °, swivel angle A-axis (max.): 30 °, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Drilling depth in one pass (V-axis): max. 1,600 mm Table transverse movement (X-axis): 3,000 mm Drilling carriage vertical movement (Y-axis): 1,600 mm Milling axis stroke (Z-axis): 1,500 mm Tilting axis (A-axis): +30° / -15° Comnm9Hcx8 Table rotation (B-axis): 360° Angular resolution A-axis: 0.001° Angular resolution B-axis: 0.001° Feed speed: max. 10,000 mm/min Spindle Spindle type: Deep drilling/milling spindle Tool holder: SK50 DIN 69871/A Adjustable spindle speed: 1 - 4,500 rpm Motor power of the drilling spindle: 17.08 kW Spindle torque: 324 Nm Optimum drilling diameter in solid material: 5 - 25 mm Max. Drilling diameter: 40 mm (with pilot hole or in short-chipping materials) Standard drilling tool holder: Diameter 25 - 70 mm Max. Oil pressure through the spindle: 120 bar Liquid cooling: available Rotary table Dimensions: 1,600 x 1,800 mm Table rotation (B-axis): 360° Table load (under rotation): 20,000 kg Standard T-slots: 22 mm MACHINE DETAILS Machine dimensions (L x W x H): 7,000 x 7,900 x 4,700 mm Machine weight: 47,000 kg Total power consumption: 74.98 kW