Townsend 2800 Peeler

Townsend 2800 Peeler

Condition: excellent (used), Year of construction: 2015, Townsend 2800 BL Sausage Peeler The Townsend Peeler 2800 accurately removes the inedible cellulose casing from your cooked and chilled sausages without damaging the sausage itself. The high capacity peeler can handle a wide variety of products, including very small sausages. The successful high capacity machine has been redesigned, according to market requirements. Manufacturer: Townsend Dqnx7P Model: 2800 BL Year: 2015 Product Diameter: 13-41 mm Max. Capacity: 225 m/min Air Pressure: 6.9 Bar Air Consumption: 25,5m3/h Power Supply: 400V / 50Hz / 1,5kW Machine Dimensions LxWxH: 2.163x666x1.742 mm Machine Weight: 402 kg.

Condition: good (used), Year of construction: 2009, Townsend SK11-350 Derinding skinner Serial: 10460 Stainless, membrane skinner, with 500mm tooth roller skin membrane, 0.75Kw, mobile, 3Ph Dqn2Rn

Condition: excellent (used), Producer: TOWNSEND Model: 9000 Type: Skinning Machine Dimensions: 1350 x 950 x 2100 (mm) Power supply: 400V 50Hz 3N Power: 1.5kW Tape width: 500 mm B7Yj9Ss9 Knife width: 510 Productivity: 1300 - 1800 pcs / h Length 1850 mm Voltage Electrical: 400V 50Hz 3N Installed Power 127 kw Main material Stainlees Steel Cutter Type Emulsifier Cutter made of Stainless steel

Condition: refurbished (used), The Townsend 9000 is a derinder that is safe, reliable and precise suitable for medium and small production plants, butcher shops etc. Equipped with a belt with width of 510 mm. This high quality derinder yields the efficiency and stability required by customers. Whole construction made of stainless steel wich ensures the highest quality and ease of maintenance. Q2Ttf Total dimensions: L:2150 x W:950 x H2000mm Inlet: width 510cm x height 120 mm. Working width: 510 mm, Throughput: 1600-1800 pieces/hr of pork bellies and flat backs Output: 1300 – 3200 kg/hr

Condition: excellent (used), 1 x Imizuni Onion Peeler and 1 x Onion Top and Tailer Dqmbwf

Condition: like new (used), Year of construction: 1999, operating hours: 24 h, Functionality: fully functional, total height: 2,500 mm, total width: 1,000 mm, overall weight: 1,200 kg, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. Bei2E3Y The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: refurbished (used), Functionality: fully functional, total length: 10,000 mm, total width: 7,000 mm, total height: 11,000 mm, overall weight: 220 kg, input voltage: 400 V, type of input current: three-phase, power: 0.75 kW (1.02 HP), cutting width (max.): 517 mm, Technical data Product number 7612 Manufacturing year 2004 Machine dimensions 700 x 700x 1,100 mm (W x D x H) Belt width 560 mm Weight approx. 240 kg Degree of protection IP 69 Capacity 16 tons/8h New shaft Machine after major service ready to work Blyov9K3Fsb Townsend's open skinning machine removes layers of fat at the same time as the skin and can adjust to different fat depths and product angles from end to end. The flat blade attachment allows easy thickness control from side to side. The machine is ergonomically designed to maximize operator efficiency and productivity. Downtime for cleaning is significantly reduced. Features Excellent performance Single belt drive system for simplified operation Easily rotatable, power-driven air collector for hygiene and visibility Smooth side panel design for right- and left-handed operators Bottomless base design and fully exposed wheels ensure proper hygiene

Year of construction: 2017, Condition: excellent (used), Auto loader for sausages into trays, machine is like brand new but missing the tray conveyor at the end. Easy enough to make one or buy replacement from Marel. P7Div

Condition: good (used), all stainless steel Isvlxhe electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: good (used), Year of construction: 2010, Purpose: Low-pressure bone separator designed for high-quality minced meat production from pork, beef, and lamb bones. Cedx9Lb283 Capacity: Processes up to 750 kg of bones per hour, yielding approximately 200 kg of 3 mm minced meat. Meat Quality: Produces high-protein, low-fat, and low-calcium minced meat with intact cell structure, free from bone marrow contamination. Technology: Utilizes proven linear press technology with low-pressure application (50–100 bar) and coarse filters (6–10 mm) for gentle meat extraction. Drum: 7mm hole perforation Dimensions and Power: Length: 3434 mm, Width: 1882 mm, Height: 1957 mm Weight: 1850 kg Installed power: 12 kW Applications: Ideal for high-value end products like hamburgers, salami, corned beef, and fresh sausages. Maintenance: Minimal wear and tear with low operating costs and high reliability. User-Friendly: Easy to operate, clean, and maintain.

Condition: good (used), Townsend 7500 Skinning Machine Hphauw0Nt The Model 7500 skinning machine is designed to remove both thick and thin membranes from a wide variety of meat products without loss of valuable meat. Brand: Townsend Model: 7500 Working Width: 500 mm Roll Width: 500 mm Power: 400V / 50Hz / 0,75kW Machine Dimensions (LxWxH): 950x800x1.050 mm Machine Weight: 260 kg.

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, input voltage: 415 V, power: 0.25 kW (0.34 HP), Eillert knife peeler for vegetables : potatoes, carrots, beetroots , parsley, celery , very small percentahe of waste 7-10 % , capacity 500-700 kg /hour Dpcklr

Year of construction: 1996, Condition: good (used), machine/vehicle number: 182, Skinner, works fine. Can be overhauled Bkp0Dbetjfb

Condition: good (used), 200 litre (approx) batter mixer from coating and frying line. Dkwni9

Condition: refurbished (used), RISCO + TOWNSEND ID.NO. 0941 Hgq2Y2V Risco line with Townsend RT 74 Sausage line with very high capacity. In good condition taken directly from production.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. 9Eyei9B9Se Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: good (used), Marel Townsend Stork rotary crumbing machine in lovely condition. Cveih7Os

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Gmmc7Uak3

Condition: ready for operation (used), Year of construction: 2004, Battenfeld injection molding machine TM 5500/2800 Year of manufacture - 2004 Tool closing system : Bimvv0O37Au Closing force- 5,500 kN Tool board dimensions: 1280 x 1280 mm Clearance between columns: 900 x 900 mm Tool height: 450...800 mm Opening path: 900 mm Injection unit: Auger diameter - 85 mm Injection weight - 1936 g Injection volume - 2128 ccm Specific injection pressure- 1354 bar

Condition: excellent (used), Hello, I sell slot punching machine for cardboard boxes made by HMB Mikołów, working width 280cm, serrated knives 35 or 41cm.Machine in working order ready to use, two pieces to choose from, I have other equipment for the production of cardboard boxes for sale 608 109 986 Gza8M0

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Odevvzu3 Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2006, Condition: ready for operation (used), Main Drive Main motor power 55KW Stroke 600mm Injection Unit Unfglnlke7 Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes This Battenfeld TM 270 / 2800 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 620 x 620 mm and an opening stroke of 600 mm. Equipped with 2 core valves, 4 air valves, and an EU 12 interface for robot connection. A solid choice for enhancing production capabilities. Contact us for more information. Application Types Injection Moulding

Mileage: 577,574 km, first registration: 11/1987, fuel type: diesel, color: grey, axe configuration: 6x4, fuel: diesel, wheelbase: 6,400 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1987, Condition: used, DUTCH TRUCKS = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,627 cc Axle configuration Suspension: leaf suspension Maximum front axle load: 7100 kg Rear axle 1: Max. Axle load: 9000 kg; reduction: outboard planetary axles Rear axle 2: Max. Axle load: 9000 kg; reduction: outboard planetary axles Dimensions Dimensions (L x W): 911 x 252 cm Weights Unladen weight: 11,760 kg Payload: 14,240 kg GVW: 26,000 kg Environment Emission class: Euro 0 Condition Uy7W3Cdo9X Damage: none Identification License plate number: 10-BFJ-3 Further information Please contact Thierry Leemans for further information.

Condition: excellent (used), Year of construction: 2001, Battenfeld injection molding machine TM 4500/2800 Year of manufacture 2001 Control Unilog B4 There are 4 machines available the same ( 2001,2002 ) Dpd7Cl Closing system : Closing force 4500 kN Minimum mold height 425mm Maximum mold height 770mm Column spacing 800 x 800mm Dimension of mounting plates 1155 x 1195mm Mould opening stroke 760mm Injection unit Screw diameter 75mm Injection weight (ps) 1506g Injection volume 1657cm3 Specific injection pressure 1739bar Robot interface Euromap 12 Machine dimensions : 8.3 x 1.9 x 2.4 Weight : 20400 kg Oil tank capacity : 800 liters

Condition: good (used), Year of construction: 2001, Battenfeld injection molding machine TM 4500/2800 Year of manufacture 2001 Control Unilog B4 There are three machines available the same ( 2001,2002 ) Closing system : Closing force 4500 kN Minimum mold height 425mm Maximum mold height 770mm Column spacing 800 x 800mm Dimension of mounting plates 1155 x 1195mm Mould opening stroke 760mm Injection unit Screw diameter 75mm Injection weight (ps) 1506g Injection volume 1657cm3 Specific injection pressure 1739bar Bnvrpjeayxo Robot interface Euromap 12 Machine dimensions : 8.3 x 1.9 x 2.4 Weight : 20400 kg Oil tank capacity : 800 liters