Control

Tele-Link S5

Condition: used, Digital input device, Interbus -Tele-Link Version: 2.0 Siemens S5 -Weight: 1.7 kg R0Bw2Zsnb

Condition: new, overall weight: 880 kg, Year of construction: 2020, Make ITR Bubdm099G8 Model: 300mm 52 link Year of manufacturing: Unused Weight (kg) ca 880 Total quantity in stock 1 set Country of origin Italy Comments Unused set of steel tracks 300mm

Condition: new, overall weight: 57,000 kg, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, machine/vehicle number: df15479123e15bcf265d560e1, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Telescoping Central tubular frame in neatly welded telescopic frame sections that run into each other. Extendable by max. 6,000 mm and can be arranged approx. every 1,000 mmPayload/point load is reduced when extended! Locking mechanism with mechanical bolt lock With sliding table Low loader lashing eyes 2 pairs of ring lashing eyes each 5to at the front on gooseneck 11 pairs of lashing mushrooms at the top and at the side embedded in the outer frame each 10to 2 x on gooseneck 9 x in low-loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between the lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Tcfhtrvl 3 pairs of additional hinged lashing eyes embedded in the low bed, 10 to each1x at the start of the low bed, 1x in front of the 1st axle and 1x behind the 3rd axle Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last 2 axles self-steering, with automatic reversing lock via reversing light and manual locking function via hand button on the vehicle. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5 Fulda tires Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Drop sides 25 mm hollow aluminum profile, 400 mm high, front and side on gooseneck, pluggable Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle Hydraulic connection w

Condition: new, machine/vehicle number: wtt4000, Westtech Woodcracker T4000 telescopic stage - available immediately Equipment: - Working range: 1,900 - 6,300mm - Telescopic extension: 4,000mm - Telescopic hose guide: internal - Own weight: 660 - 700kg - Lifting moment on excavator kinematics: 92kNm - Lifting capacity fully extended: 1,550kg - Maximum pressing force: 100kg - Recommended liter output for telescopic extension: 50 - 90 l/min Cln7Sqkoje - Recommended liter output for secondary function: 30 - 60 l/min - Recommended operating pressure: 200 bar - Service weight of carrier vehicle: 14 - 22t Optional: Westtech Woodcracker CS510 crane: - Cutting diameter: 540 mm - Grab opening width: 1,270 mm - Own weight (basic - fully equipped): 360 - 400 kg - Recommended liter capacity: 50 -110 l/min - Recommended operating pressure: 200 - 280 bar - Chain lubrication saw: oil Various adapters available immediately - price on request We are an official Westtech Woodcracker sales and service partner, Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and with 800 used vehicles one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Condition: excellent (used), Year of construction: 2016, Package handling systems manufacturer YJ Link consisting of the following components: Dqobyp Working width 440x330mm PCB loader AOI YJ Link PCB unloader AOI YJ Link ACC-CE Good/bad sorting PCB transport module 500 mm YJ Link AUD-CE

Condition: used, Functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm Drfejj PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 400 mm. Technical data to the shelf connector:Manufacturer: Link 51Type: Boltless XLIncluded in delivery:01x shelf connector used(consisting of 2 profiles)Usable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 515 mmShelf spacing: approx. 400 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.321 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Etbsjlv

Condition: used, Year of construction: 2005, operating hours: 6,412 h, Dimensions (LxBxH): 1550 x 336 x 377 cm Serial number: D7J5-7551 Condition undercarriage: 75% Link-Belt RTC-8075 Rough Terrain Crane, 75 Ton lifting capacity, 6 cylinder turbocharged Caterpillar 3126B engine with 225HP (168kW), EPA Compliant, 3F-3R Powershift transmission, 4x4x4 configuration, 12,5 - 38,71 Mtr. four-section telescopic boom, 20,42 Mtr. two-piece bi-fold offsetable swingaway jib, max. tip height 61,67 Mtr, Johnson 5 sheave hook block & overhaul ball, main & aux. winch, 4 hydr. telescopic outriggers, LMI and anti-two-block system, 6,804 Kg counterweight, 29.5-25 tyres 75% remaining. Crane comes straight out of work and is in clean condition. Inspections are welcome. Iswf2Ru

Condition: good (used), Manufacturer: Easy-Link Overall dimensions: 2400 x 700 x 2300 mm Qfyp7 Box size: 700 x 760 x 500 mm Belt size: 2700 x 190 mm

Year of construction: 2017, operating hours: 0 h, Condition: new, machine/vehicle number: 1705-0215-02-FG-1220, Inspection Conveyor Transport of PCB Chain conveyor L-R Interface - Smema Dkkkjr Electronic adjustable width of chain

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow box profile: 80|53 x 45|25 mm Type of truss: 4 BST Step profile: H 28 mm, W 20 mm agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 900 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Cjk33Cws Further information about the pallet rack traverse: The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse. This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage. The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar.

Condition: good (used), Year of construction: 2011, Motor Manufacturer: SEW-EURODRIVE Isdxfmpfa RPM: 1435 Total length: 7000 mm Belt width: 2 x 35 mm Distance between the belts: 480mm

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 300 mm. Technical data for shelf connector:Manufacturer: Link 51Type: Boltless XL Included in delivery:01x shelf connector used (consisting of 2 profiles)Suitable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 415 mmShelf spacing: approx. 300 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.092 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Npz8D

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow box profile: 80|53 x 45|25 mm Type of truss: 4 BST Step profile: H 28 mm, W 20 mm agraffe: 3 HK (hooks) clear width: 2.700 mm Cro7Cx9Pcw max. load per truss pair 900 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Further information about the pallet rack traverse: The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse. This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage. The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar.

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 650 mm. Technical data for shelf connector: Manufacturer: Link 51Type: Boltless XL Included in delivery:01x shelf connector used (consisting of 2 profiles)Suitable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 765 mmShelf spacing: approx. 650 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.878 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Pt2Y3U

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow type of truss: B120ZC box profile: 120x50 mm agraffe: 3 hooks clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: 3Rp3J7Tqk9 This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Year of construction: 1999, Grinding wheel diameter max. 100 mm Spindle speed 5600 rpm Drive power 1.5 kW Dimensions L x W x H 1000 x 800 x 1680 mm Machine weight 450 kg Siegfried Volz Machine Tools Ix9Cw298 Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: standard, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. Ch7Rscdtkw A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 Dl0Yap To the machine : Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Condition: used, overall weight: 42,000 kg, maximum load weight: 30,690 kg, axle configuration: 3 axles, loading space length: 15,440 mm, loading space width: 2,550 mm, loading space height: 770 mm, first registration: 09/2023, next inspection (TÜV): 09/2025, Year of construction: 2023, total width: 2,550 mm, total height: 770 mm, Equipment: ABS, 3-axle semi-low loader KÄSSBOHRER Telescopic First registered in new condition Fifth wheel height 1,150 mm Tiimzrrnc Total length 13,190 mm Table that can be moved on the telescope, width 300 mm Length of gooseneck 3,950 mm Length of low bed 9,240 mm + telescoping 6,200 mm Loading height of low bed only 770 mm Empty weight approx. 11,317 kg Chassis partially metallized, visible sides BPW axles with drum brakes 1st axle LIFT AXLE 3rd axle self-steering WABCO trailer EBS with anti-skid protection RSS Tires 12-fold 205/65 R 17.5 MICHELIN Extra-wide package on 3,000 mm ALUMINUM docking ramps, width 600 mm, length 2,400 mm, load capacity up to 32 tons. Lashing rings: 6 pairs with a load capacity of 10 tons. Heavy load 8 pairs with a load capacity of 5 tons. 6 pairs with a load capacity of 8 tons. 1x long material stand Large tool box at the front behind the bulkhead across the direction of travel (LxWxH) 600 x 830 x 2,310 mm RENT is the new BUYING, also available immediately from us in full-service rental-----

Condition: used, Condition: Used Year of manufacture: 2021 Working hours: on request Engine: Perkins (Adblue/DPF) Power: 100 kW = 135 HP Registration: 20 km/h Emission standard: (Stage V / Tier 4f) Drive: - 4x4 all-wheel drive Maximum lifting capacity: 5000 kg Maximum lifting height: 24.1 m Weight: 18000 kg Total length: 7.2 m Total height: 3.03 m Total width: 2.38 m Tires: Wheel set 18 R 22.5" Support: automatic, fully variable Betyiljb Equipment: • Anti-tip system with blocking of dangerous movements • Hydraulic plug for possible accessories on the mast head • Socket for attachments on the telescopic head • Soundproofed closed cabin with heating with ROPS – FOPS approval • Sprung Grammer seat with double joystick, right joystick including travel movement selection (FNR) on the joystick • Rear & front axle with self-locking differential (limited slip 45%) • Travel release between 0° - 360° with rotated upper carriage, with automatic travel alignment. • Operating hour meter • Boom vibration damping • Joystick capacitive sensor system & dead man's switch • Joystick control 4-1 (proportionally controllable), • Radio remote control for work basket and lifting devices including end position damping in the mast • Inch. Pedal for precise (oil division driving and working movement) • Adjustable steering wheel • Work lights at the front and rear of the cabin (LED) • 3 x steering modes (2-wheel, 4-wheel & crab steering) • Indicator light "wheels in straight line" with automatic locking • Automatic slewing ring locking • Sun blind and LED step lighting • Rear view camera • Pallet fork including FEM fork carrier • Lattice boom 1.3m with 2t cable winch, • Work basket hydraulically telescopic to 4.20m, swiveling _____ Leasing possible through leasing partner Rental purchase option - rent first, then buy (rental costs can be deducted from the subsequent purchase price) The offer is non-binding and subject to change. We would be happy to show you the machine and create an offer tailored to your needs. The machine has a CE approval and all documents are available. No guarantee for input errors. Subject to error and prior sale.

Year of construction: 1988, Condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Pristine Condition Da8Vlari0 Not been used for 15 years

Condition: excellent (used), Functionality: fully functional, Year of construction: 2017, We offer 2 used screw pumps. Company: Montanbüro GmbH. Dqphif Machine type: S5/7.5 kW. Year of construction 2017. Fully functional.

Condition: used, S5 control needed second hand Sx0Iiw

Condition: new, mast type: telescope, Condition: New Year of construction: 2024 Working hours: on request Engine: Perkins (Adblue/ DPF) Power: 100 kW = 135 HP Drive: - 4x4 all-wheel drive Registration: 20 km/h Emission standard: (Stage V / Tier 4f) Drive: - 4x4 all-wheel drive Lifting/load capacity max.: 5000 kg Lifting height max.: 24.1 m Weight: 18000 kg Total length: 7.2 m Total height: 3.03 m Total width: 2.38 m Tires: Wheel set 18 R 22.5" Support: automatic, fully variable Equipment: • Anti-tip system with blocking of dangerous movements • Hydraulic plug for any accessories on the mast head • Socket for attachments on the Telescopic head • Soundproofed closed cabin with heating with ROPS - FOPS approval • Sprung Grammer seat with double joystick, right joystick including travel movement selection (FNR) on the joystick • Rear & front axle with self-locking differential (limited slip 45%) • Travel release between 0° - 360° with rotated upper carriage, with automatic travel alignment. • Operating hour meter • Boom vibration damping Boipmjxctbk • Joystick capacitive sensor system & dead man's switch • Joystick control 4-1 (proportionally controllable), • Radio remote control for work basket and lifting devices including end position damping in the mast • Inch. Pedal for precise (oil distribution of driving and working movements) • Adjustable steering wheel • Work lights at the front and rear of the cabin (LED) • 3 x steering modes (2-wheel, 4-wheel & crab steering) • Indicator light "wheels in straight line" with automatic locking • Automatic slewing ring locking • Sun blind and LED step lighting • Rear view camera • Pallet fork including FEM fork carrier • Lattice boom 1.3m with 2t cable winch, work basket 4.20m swiveling • Various attachments possible! _____ Leasing possible through leasing partner Rental purchase option - rent first, then buy (rental costs can be deducted from the subsequent purchase price) The offer is non-binding and subject to change. We would be happy to show you the machine and create an offer tailored to your needs. The machine has a CE approval and all documents are available. No guarantee for input errors. Errors and prior sale reserved.