Welding fume extraction

TEKA STRONGMASTER BIA

Condition: used, Year of construction: 2008, Technical details: volume capacity: 3000 m³/h rated current: 2,5 A Bsh97Kft9Hw filter: Ø 220 x 600 mechanisch control voltage: 24 V motor capacity: 1,1 kW weight of the machine approx.: 130 kg dimensions L x W x H: 0,8 x 0,9 x 1,3 m Integrated sheet steel construction, movable Intake nozzle via ceiling Ø 150x120mm Intake nozzle Ø 150 with flexible 2-piece insert with intake funnel Exhaust air opening HxW: 280x580mm Protection class IP54 Connected load 400V *

Year of construction: 2007, Condition: good (used), Number: 3867510021001 Volume flow: 3.000 m³/h Extension arm approx.: 3,000 mm Equipment: mobile Accessories: Connection: 1,1 kW 400 V Weight: 130 kg Sgmfr Dimensions: 800 x 800 x 1.500 mm without hose Hose length: approx. 4,000 mm

Condition: good (used), Year of construction: 1998, Offer 24465 Technical data: - mobile cartridge filter unit with 2 articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - 2 x articulated extraction arm 360° 4000 mm - Extraction volume up to 1100 m³/h - Air volume flow approx. 3000 m³/h Cgeult3Z - Max. static pressure 2500 pa - Filter with indicator light - Particle pre-separation through baffle plate - Filter cleaning via compressed air gun through maintenance door - Drive - fan 220 V / 2.20 kW - Space requirement approx. W 660 x H 1600 x D 780 mm - Weight approx. 200 kg - Suction hoses were taped with adhesive tape by previous owner

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) R3Cil - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: excellent (used), Year of construction: 2003, operating hours: 2,000 h, suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extractor, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2003 Operating hours: 2000 Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Boexhzxo0Xk Parameters: Sound-insulated fan of 4 Kw. Capacity 5000 m3/h Vacuum pressure 3000 Pa Inlet diameter : 315 mm Filtration area: 50 m2 spark pre-catcher control cabinet Possibility to order new filter cartridges tailored to the customer's needs stock no.:0846

Year of construction: 2007, Condition: good (used), Offer 22205 Technical data: - Boom length approx. 6 m - 5 joints - Suction pipe diameter 125 mm - Wall connection - bracket Caoqyk2Zjz - Weight approx. 100 kg

Year of construction: 2012, Condition: excellent (used), The LFE 101 mobile filter unit has been specially designed for applications to extract fumes and fine dust generated during laser engraving, cleaning or cutting. The process air is first drawn in via the intake housing of the LFE at the rear and fed into the filter chamber via a baffle plate. In the first filter stage, the raw air meets three filter cartridges, which separate the fumes and dust using the principle of surface filtration. The cartridges are cleaned fully automatically using compressed air, depending on the degree of soiling. The cleaned dust particles end up in a dust collection tray underneath the filter cartridges. The dust collection tray can be easily removed for emptying via a maintenance door. In the second filter stage, the air flow is guided through a cassette filled with activated carbon granulate. This filter stage offers a very high filter surface for the absorption of gases and odors. 37i7fomp As the final filter stage, the system is equipped with a disposable HEPA filter that absorbs the last fine particles. Automatic filter monitoring indicates when the cartridges or the HEPA final stage filter needs to be changed. The extraction unit is equipped with powerful high-pressure turbines that can be infinitely adjusted to increase or decrease the suction power. All operating statuses can be shown or set via the display. Furthermore, the LFE system is equipped with a particle sensor in the pneumatic area to detect possible filter breakthroughs and automatically switch off the system in an emergency The price does not include VAT Ebgtzyixl

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For you as a buyer the following information for your safety! The following points are carried out at our offered chambers in advance: Bivsnuj22U 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 11 kW (14.96 HP), Equipment: documentation/manual, For sale 3 pcs Teka Pusch Pull fume hood. The units are equipped with Easy-Cleain-Plus filter cartridges. One 800 sqm They have been in use in a welding shop with a total area of 800 m2 in the years 2017-2020. Due to change of activity, the 3 units are for sale with the installed network. The equipment is available for inspection in working condition by appointment. The Push Pull system is excellent for cleaning the air in halls, where local extraction alone is for some reason insufficient or where the productivity of the productivity is adversely affected. Suction outlets are positioned at a height of approximately 5 to 6 metres, the the cleaned air is recirculated on the opposite side of the hall. Harmful substances are removed from the system collects and filters the pollutants on the intake branch and discharges the cleaned air into the space on the discharge branch. back into the space. It is possible to suck in fresh air at the suction branch. Filtration equipment: TEKA FILTERCUBE 4H - 11 kW (3DB) TEKA CUBE - 3 - 3D (TEKA CUBE 3 - 3D) Fixed installation suction and cartridge separator with automatic filter cleaning. The "Easy" system is used. Clean+ " inserts are provided with a protective layer ("precoat") at the time of manufacture, which provides surface filtration and thus high (>99%) filtration efficiency (BIA M filter class) and a long service life. Automatic pulse cleaning is ensured by integrated diaphragm valves and a microprocessor controlled "Pulse Control, which is easy to operate and programmed to suit the current The dirt that accumulates on the surface of the filters is removed by the pre-filter and post-filter cleaning. pressure difference (continuously monitored before and after the filters). The control is based on the pre-set pulse cleaning when the preset value is reached. The amount of dirt ejected by each pulse is falls into the dust tank, from where it is periodically discharged. The cleaning pulses are timed and manually activated. The text display shows the current operating status (pressure drop, operating hours, date, etc.). Technical data FC 4H 11kW: Pre-filter: perforated baffle Filter surface [m²]: 100 (4 cartridges 25m²) Filter cartridge: BIA M Control: Pulse-Control Current consumption [A]: 0,3 Fan power [m³/h]: 8.000 (working point) Pressure [Pa]: 2.500 (at working pressure) Motor power [kW]: 11 Power supply voltage [V/Hz]: 400/50 Current consumption [A]: 22,5 Motor control: Star-Delta-Switching Noise level [dB(A)]: approx. 78 Suction nozzle: Ø400mm left side Dpcxph Blower outlet: Ø450mm right side Dimensions (WxHxD) [mm]: approx. 800 x 800 x 2920 Filtercube 4H extractors footprint: 800x800mm)  Each unit is IFA certified according to DIN EN ISO 15012-1 (BGIA) certification. The biggest advantage of the Push Pull system is that it can be used unnoticed by the workers without the need to involve the workers, thus increasing productivity productivity. The filter cartridges are cleaned by a microprocessor-based CONTROL UNIT2 control and special POWER-SPRÜH system. CONTROL UNIT2 filter control Microprocessor CONTROL UNIT2 filter control via a text display can be monitored via a text display. This control monitors all the functions of the extraction and filtration equipment operations. It determines the amount of compressed air required for cleaning, the the air volume can be adjusted and the control can be operated manually or pressure differential and time. Also for remote indication of the filter stat

Condition: used, Year of construction: 2012, machine/vehicle number: 8707310011001, Standard configuration Uppfy7Pv9J

Condition: used, Year of construction: 2000, suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extractor, self-cleaning filter,pneumatic, vacuum TEKA. Model: TK-PF Clwlpqhvl3 Mobile filtration and ventilation unit. For welding, grinding and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which results in high efficiency of the unit. Fan of 2,2 Kw. - Three-phase Efficiency 3500 m3/h Vacuum 3000 Pa New cartridge filter cartridges. year of production 2000

Condition: good (used), Year of construction: 2013, machine/vehicle number: 10347210021001, Offer 24484 Technical data - Upright version for filtering welding fumes + grinding dusts, - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with - chromium + nickel content of over 30% - Exhaust air can be discharged into the work area or outside - TEKA control unit 98Xyfbh - Air volume flow up to approx. 10000 m³/h - Max. static pressure up to approx. 2800 pa - BIA / M filter cartridges - Pulse Jet cleaning type with separation efficiency > 99 % - Separate control cabinet - Silenced fan section with adjustable discharge nozzles - Intake pipes with ventilation grilles approx. 10 m - Connection 400 V / 11 kW - Pneumatic connection 6 bar - Space requirement approx. - Weight approx. 1000 kg

Condition: new, volume capacity 2500 m3/h 0 3000 mm N92D9 total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: excellent (used), BIA Turnkey Test Systems Technical data: The BiA test stand offered here offers the possibility of testing suspension struts in various test environments. The suspension strut can be tested alone or with the wheel suspension to test its properties. Dimensions(Approx.): 4000 mm H x 5800 mm width x 6400 mm depth Data of the BiA test bench actuators: z-actuator (road side): - Max. static force: 72 kN - Stroke: +/- 125 mm - Max. Max. speed: 2 m/s - Max. Acceleration: 200 m/s² - Frequency range: 0.1 - 100 Hz y-actuator: (road side): - Max. static force: 21 kN - Stroke: +/- 50 mm Bngc2Ou2Liq - Max. Max. speed: 1 m/s - Max. Acceleration: 50 m/s² - Frequency range: 0.1 - 100 Hz Vehicle mass actuator: (sprung mass): - Max. static force: 30 kN - Stroke: +/- 125 mm - Max. Max. speed: 1 m/s - Max. Acceleration: 30 m/s² - Frequency range: 0.1 - 50 Hz Data of the Parker HPU (Hydraulic Power Unit): High pressure side: - 1 x high-pressure pump with AC motor - Proportional valve and check valve - Filter 5 μm with 2-threshold clogged up indicator - Pressure measurement - Manual valve - Max. Oil flow: 450 l/min - Max. Pressure: 28 MPa - Enclosure to limit noise level to 70 dB Low pressure side: - 1 x manual valve - Filter 10 μm with single threshold indicator - Heat exchanger with humidity detector - Low pressure pump (2.2 kW) Other features: - Oil level measurement inside the tank - Oil temperature measurement inside the tank - High pressure pump load management - Retrofitted moisture filters to prevent contamination of the oil with water avoid Sale ex location! Scope of delivery: (see picture) The chassis dynamometer from BiA and the HPU from Parker are being sold. A HiL simulation environment is not part of the offer! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Functionality: fully functional, 1 used TEKA scraper / scraping unit For fully automatic and semi-automatic operation Dpmcxp Type: THS 60/20 Incl. control Location: Northern Germany Performance: 140cbm/h Boom: 20m Scraping bucket: 1300 l Pull rope motor: 45kW Retrieval rope motor: 7.5 / 10 kW Slewing mechanism motor: 0.75kW (frequency controlled) Boom adjustment winch: 1.1 kW Operating voltage 400V Control voltage 230 V Frequency 50 Hz AVAILABLE IMMEDIATELY Price on request

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 11 h, Functionality: fully functional, machine/vehicle number: A17727810071001, type of input current: three-phase, input voltage: 400 V, total width: 665 mm, total height: 2,070 mm, volume flow: 3,500 m³/h, space requirement height: 2,070 mm, space requirement width: 665 mm, filter area: 20 m², suction capacity: 3,500 m³/h, power: 2.2 kW (2.99 HP), frequency: 50 Hz, Equipment: type plate available, For extracting fumes from several workstations simultaneously, for working with unalloyed metals, precious metals, galvanized material and aluminium. The device is IFA-tested for welding fume class W3. B9Bnb8W27Y Filter cartridge ensures a separation efficiency of ≥ 99 % Max. fan volume flow 3,500 m³/h Filter area 20 m² Supply voltage 400 Volt Motor power 2.2 kW Dimensions (WxDxH) 665 x 983 x 2070 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 4,311 h, Functionality: fully functional, filter area: 100 m², suction capacity: 10,000 m³/h, negative pressure: 4,100 Pa, Dust extraction, filtering, welding fume extraction, self-cleaning patron filter, pneumatic filter, vacuum filter for plasma, laser, sandblasting, soda blasting, shot blasting and for all kinds of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2018 Hours worked - 4311 h Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. The fan on the clean side which reduces the risk of explosion to a minimum. Dqksxl The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary welding fume extraction unit Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: *11 Kw sound-insulated fan. *Productivity up to 10000 m3/h. *Vacuum max 4100 Pa *Filtration area of 100 m2. *Built-in frequency converter. *Control cabinet with technical documentation. *Siemens Simatic S7-1200 controller. *Includes TEKA FVS7000-12000 water-based spark catcher. The spark catcher has a built-in heater. so that it can also be mounted outdoors. *Noise suppressor Possibility to order new filter cartridges tailored to the customer's needs.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 210081156, Offer 24397 Technical data: - Mobile extraction unit with articulated extraction arm - suitable for welding fume extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Articulated extraction arm 360° 4000 mm - max. fan volume flow approx. 1600 m³/h - max. static pressure 1800 Pa - Particle separator : Coarse filter, pre-filter - main particle separator : main filter - gas separator : activated carbon filter - Drive - fan 220 V / 1.10 kW - Space requirement approx. W 600 x H 900 / 2450 x D 600 mm - Weight approx. 80 kg Brxoyala8V0 - Operating hours 936 h

Year of construction: 2023, Condition: new, TEKA welding fume extraction Model: Filtoo NEW Compact unit Power: 1,1 kW, 230V / 50 Hz, incl. 3 m extraction arm SIG Technical data: Filter stage I: Coarse filter ISO 16890 ePMcoarse-45°. Filter stage 2: Pre-filter, ISO 16890 ePM10-55% Filter stage 3: Activated carbon filter Filter stage 4: Main filter ISO 16890 ePM1-80% Fan capacity 1600 m³/h Motor power 1,1 kW Current consumption 7,0 A Current type 1 PH+N+PE Noise level approx. 72 dB(A) Plant color: RAL 7016 (anthracite gray) dimension WxDxH approx. 580x580x900 mm weight: 80 kg Description: The newly developed filtoo filter unit is a mobile filter unit, which can be used for many in the field of filtration of smoke, dust and gases, dusts and gases. The unit has been tested on the basis of DIN EN ISO 21904-1/2 and is IFA certified for welding smoke class for welding smoke class W3. Separation efficiency 99 when used as intended, the filtoo is suitable for the separation of smoke fumes generated by welding separation and and joining processes during the processing of unalloyed unalloyed steels, including high-alloyed nickel chromium steels. Function: By means of the extraction arm or other capture devices, the air contaminated with pollutants is contaminated air is sucked into the filter system. is sucked in. In a multi-stage filtering process the particles or gases are filtered out of the are filtered out of the air stream, and the clean air is fed back into the work area. Field of application: Welding workplaces in the workshop area Cwvrmgouo for soldering applications for restorers in locksmith shops You get a complete ready to use "Plug an Play System" only the acquisition- and device must be connected before connected before commissioning.

Condition: used, Year of construction: 2011, 6500 m³/h 2700 Pa power capacity 7,5 kW Blhen27Arsz water consumption 15 l/h weight 750 kg dimensions 1500 x 1800 x 3300 mm

Year of construction: 1994, Condition: good (used), Concrete mixing plant Teka 1,5 -Mixer 2250/1500 with 2 outputs -year of construction 1994 -Bucket elevator with winch -scales for cement, water, admixtures Dofe9X -3 x cement silo 50 t with screw conveyors -Teka RS 150 scraper system -Control system -Heating system

Condition: excellent (used), Year of construction: 2016, operating hours: 305 h, suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extractor, self-cleaning filter , pneumatic, vacuum TEKA. Model: Cartmaster Mobile filtration and ventilation unit. For welding, grinding and all kinds of dry dust. Cartridge filter cartridges. Filter cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the unit. Fan of 2,2 Kw. - Three-phase Efficiency 3500 m3/h Vacuum 3000 Pa Unit in very good condition. Only 300 hours of operation. year of production 2016 Xiwkmod3E stock number: 0832

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 Wuw9E3D - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: good (used), Year of construction: 2016, operating hours: 5,268 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 operating hours: 5268 Filter cleaned by microprocessor controller with compressed air pulses during operation by which high efficiency of the device. Bn22V7Wqgcu Low demand for compressed air thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: Sound-insulated fan with a power of 3 Kw. Capacity 4000 m3/h Vacuum pressure 3000 Pa Inlet diameter : 315 mm Filtration area: 50 m2 control cabinet technical documentation Possibility of ordering new filter cartridges tailored to the customer's needs.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 9501441040100301, Offer 24469 Welding mist filter system with spark pre-separator + extraction arms Technical data - Vertical version for filtering welding fumes + grinding dusts, - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with - chromium + nickel content of over 30% - Exhaust air can be discharged into the work area, e.g. for heating or outside - can be - TEKA control unit Brmnx99Efxq - Air volume flow up to approx. 4000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning system with separation efficiency > 99 % - Separate control cabinet - Connection 400 V / 4 kW - Space requirement Filtercube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg - Separate spark pre-separator make TEKA type FVS 4000 - 6000 - Space requirement spark separator W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Pipework