Stork TBM 400 3000 EL

Stork TBM 400 3000 EL

Condition: good (used), infeed belt “Stork” all stainless steel Do0Btl mesh wire belt belt width 400 mm mobile dimensions: (L x W x H) : ± 1.400 x 700 x 900 mm + “Marel Townsend” GoldFryer Type TBM 400/4000 TH all stainless steel suitable for thermic oil heated with lower and upper belt frying length 4.000 mm belt width 400 mm adjustable speed oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. 9Eyei9B9Se

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm Bt8Wxpwxif weight 20 t dimensions of the machine ca. 5 x 3 x 0,5 m Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m

Condition: good (used), all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists F3Qpd8Qy suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: good (used), - Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) - X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly Xrd7Juab - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 350.000 Kg Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details !

Condition: excellent (used), all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 217 kW) with top hold down belt with Teflon infeed belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection Cgrs9Khe9G overall length : ± 5.400 mm overall width : ± 1.500 mm

Condition: new, Sinus D is the largest series in the universal lathes segment. The construction follows a classic design but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the frictional connection between the motor and the spindle takes place via a manual multi-disc clutch. With integrated functions such as the removable bed bridge, rapid traverse and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. Buoiseel

Condition: good (used), load capacity: 3,000 kg, The drive for the rotation of the clamping plate, to which the part to be machined is part to be machined is attached is driven by a powerful combination of electric and Doyevv oil-hydraulic drives. Lifting, lowering and tilting are performed by high-quality oil-hydraulic cylinders, oil-hydraulic cylinders. The main advantages of using the "Rotolift" are greater efficiency for the company and ergonomics for the operator. efficiency for the company and ergonomics for the user. This has a This has a positive effect on the quality of workpiece processing and reduces costs. Compared to conventional positioning of workpieces with cranes, costly non-productive times are also costly non-productive times are also considerably reduced. Load capacity 3000 KG Horizontal height min. 720 mm Horizontal height max. 1570mm Height tilted to center min. 740mm Height tilted to center max. 1620mm Total length 2400mm Total width 930mm Disc diameter 1100mm Weight 1480 KG with many additional accessories Top condition

Condition: new, Year of construction: 2024, Sliding saw Robland FZ 400 EL Voltage 400V Three-phase main saw motor S6 4 kW (3x400V) Scoring machine motor power 0.75 kW Z4 anodized sliding table 420 x 3200 mm Cutting length 3500 mm 2Wu7Aa max. saw blade (without equipment) 400 mm, max. 350 mm with scorer Graduation 120 x 20 mm (without dial) Cutting height 90°: 125 mm, 45°: 90 mm Cutting speed 4000 RPM Weight 780 - 880 kg

Condition: used, Year of construction: 1997, Overview This fryer was built in 1997 by company Stein/ JBT in the US. The Stein 400/3000 fryer can be used for all kind of continuously frying applications like chicken nuggets, pork Schnitzel, chicken Schnitzel, etc.. The machines are on stock. Technical details Output: approx. 500 kg/h (depends on the product) Belt width: 400 mm (cooking area) Belt length: 3000 mm (cooking area) Scope of delivery Fryer 400/3000 | Stein/ JBT | 1997 E2Ovk03

Condition: as good as new (ex-display), Year of construction: 2022, Carriage length: 3200 mm Bohrq7Ie Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: manual Saw blade angle display: Scala Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: good (used), all stainless steel electrically heated 386 kW Isvlxhe with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: used, Electric heating: 28 KW B9Q9Du8G3X Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100*100*200 height Delivery time: 30 working days after advanced payment

Condition: like new (used), load capacity: 3,000 kg, The drive for the rotation of the clamping plate, to which the part to be machined is part to be machined is attached is driven by a powerful combination of electric and Bohek3Cydde oil-hydraulic drives. Lifting, lowering and tilting are performed by high-quality oil-hydraulic cylinders, oil-hydraulic cylinders. The main advantages of using the "Rotolift" are greater efficiency for the company and ergonomics for the operator. efficiency for the company and ergonomics for the user. This has a This has a positive effect on the quality of workpiece processing and reduces costs. Compared to conventional positioning of workpieces with cranes, costly non-productive times are also costly non-productive times are also considerably reduced. Load capacity 3000 KG Horizontal height min. 720 mm Horizontal height max. 1570mm Height tilted to center min. 740mm Height tilted to center max. 1620mm Total length 2400mm Total width 930mm Disc diameter 1100mm Weight 1480 KG with many additional accessories Top condition

Condition: new, 3000 mm Working width 400 mm Wheel width 400 mm Bsutnadade roll diameter 60 mm number of rolls 12 Stck. work height max. 810 - 910 mm

Condition: new, Year of construction: 2023, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: manual Display saw blade angle: digital Display cutting height: Digital Ccpljat2Sx Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: excellent (used), Year of construction: 2010, Townsend MasterFormer Type: TA1521 Serial number: 10080439 Year of construction: 2010 Stork MasterFill Type: MTFII Serial number: 0441010 Year of construction: 2010 Cfbleeebaw Stork Master Slice Type: DRST Serial number: 0420410 Year of construction: 2010 Caliber: 50 mm Karl Schnell vacuumfiller Type: P10SE, 596P Serial number: 22045 Year of construction: 2010 Power: 3 x 400V, 50Hz, 10.9kW Weight: 1180 kg Risco vacuumfiller Type: RS303 Serial number: T310021 Year of construction: 2010 Power: 3 x 400V, 50Hz, 7.7kW Weight: 830 kg With RS70 grinding head

Condition: used, 3000 Stacking containers Meat crates E2 Used goods, very good condition, see pictures. Dimensions: 60 x 40 x 20 cm Color: red Stackable, stable, incl. carrying handle Bargaining price: € 6.50 net from stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by arrangement. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. Dql78Z (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, Year of construction: 2004, Overview This linear oven, type: STORK THS 630/6000 was built in 2004. The unit is allready dismantled and on stock. The linear oven has two heating areas available that can be tempered differently at the same time. That’ll bring you maximum efficiency in food processing with minimized energy consumption. Technical Details electrically heated heating separately adjustable in two areas adjustable speed belt width ± 630 mm net cooking length : ± 6.000 mm overall dimensions (l x w x h) : ± 8.500 x 1.700 x 3.600 mm with belt wash system suitable for CIP-cleaning canopy with electric hoists suitable for steam injection (heating + product yield) Scope of delivery Linear oven | Stork/ Marel |THS 630/6000| 2004 Uifu2Cwltz

Condition: good (used), 200 litre (approx) batter mixer from coating and frying line. Dkwni9

Condition: good (used), Year of construction: 2008, Coming soon to our storage park - fully refurbished MG60/80P gizzard harvester, ready to work! Shlqi8Qme2

Condition: good (used), Marel Townsend Stork rotary crumbing machine in lovely condition. Cveih7Os

Condition: good (used), Year of construction: 2011, We are pleased to present for Sale the Vent cutter VC-16 RS from Stork. Brand Stork Model Bmfels78E78 VC-16 RS Year 2011

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Gmmc7Uak3

Condition: good (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Type: TREC NT Dof7Uf Year: 2011 Capacity: 13500bph Condition: Used/Very good