Cylindrical Grinding Machine

STANKO 3M194 / 630 x 4000 mm

Year of construction: 1974, Condition: ready for operation (used), There are two identical Stanko lead and feed screw lathes and a WMW lathe available. 1/2) Russian Stanko factory 1M63, year of manufacture: 1974, turning diameter over bed/face slide: 630mm/350mm, center width: 2800mm, center height: 315mm, spindle bore: 70mm, speed: 1250rpm, power: 15kW, machine dimensions X/Y/Z: approx. 4900mm/1700mm/1300mm, weight: approx. 5100kg. 3) WMW DLZ 630 III 3150, year of manufacture: 1963, turning diameter over bed/plane slide/in the offset: 630mm/340mm/1200mm, offset length: 800mm, center width: 3150mm, center height: 315mm, spindle bore: 70mm, speed: 1120rpm, power: 15kW, machine dimensions X/Y/Z: approx. 7500mm/1500mm/1700mm, weight: approx. 11500kg. On-site inspection is possible. Individual sale possible. Dqn2Fr

Condition: ready for operation (used), The scope of delivery includes: 01x U-profile, used Material color: gray U-profile dim.: approx. 50 x 38 mm material thickness web: approx. 5,00 mm length: approx. 5,850 mm weight / pcs.: approx. 32,120 kg Weight / m: approx. 5.49 kg Other lengths of steel beams are available for purchase below: Total length: / U-profile: / weight / pcs.: / price: approx. 5,300 mm / U: 50 x 38 mm / approx. 29.100 kg / 30.00 € plus 19% VAT. approx. 4900 - 4780mm / U:50x38mm/ approx. 26,240kg/ 27,00 € plus 19% VAT. approx. 4,640mm / U: 50x38mm/ approx. 25.470kg/ 26.00 € plus 19% VAT. approx. 4290 - 4170mm / U:50x38mm/ approx. 22,890 kg/ 23,00€ plus 19% MwSt. approx. 4.060 mm / U: 50 x 38 mm/ approx. 22,290 kg/ 23,00 € plus 19% VAT. approx. 3.570 mm / U: 50 x 38 mm / approx. 19,600 kg / 20,00 € plus 19% VAT. approx. 3.370 mm / U: 50 x 38 mm / approx. 18,500 kg / 19,00 € plus 19% VAT. approx. 2.500 mm / U: 50 x 38 mm / approx. 13,730 kg / 14,00 € plus 19% VAT. approx. 2.420 mm / U: 50 x 38 mm / approx. 13,290 kg / 14,00 € plus 19% VAT. approx. 1850 - 1800 mm / U: 50x38mm / ca. 9,880kg / 10,00€ plus 19% VAT. approx. 1770 - 1700 mm / U: 50x38mm/ca. 9,330kg/ 10,00 € plus 19% VAT. approx. 1350 - 1340 mm / U: 50x38mm/ca. 7,360kg/ 8,00 € plus 19% VAT. approx. 1210 - 1090 mm / U: 50x38mm/ca. 5,980kg/ 6,00 € plus 19% VAT. ca. 660 - 630 mm / U: 50x38mm/ca. 3,460kg/ 4,00 € plus 19% VAT. Remark: - In the U-profiles are several small drill holes with a drill hole diameter of 8 - 15 mm! 9Adsccltw3 - The U-profiles may be slightly bent, as well as have small rust spots or other damages. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Year of construction: 1981, Functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Bw9Pvy00Mm Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 Dqns2J - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: like new (used), Technical data: complete revision in 2024 maximum cutting width: 4050 mm maximum cutting capacity steel 400 N/mm2: 10.0 mm CNC control: ROBOSOFT SP9 NC (new) adjustable rip fence: 1000 mm adjustable cutting gap adjustment adjustable cutting angle adjustment: 0.5° - 3° working height: 920 mm CE mark 2 sets of new blades Dimensions (length x width x height): approx. 4900 x 2600 x 2450 mm Cquse73Aou Weight: approx. 13.5 tons Warranty: 3-month warranty for replacement parts The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits H3Z9Y2P9Q No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: good (used), Functionality: fully functional, WMW Niles DLZ 630 x 5000mm lathe, max turning diameter 700 mm , max length 5000 mm, Bsivlwpti8A

Condition: new, plate depth 4000 mm plate width 2000 mm plate height 600 mm weight 6700 kg GERD WOLFF clamping cube 4000 x 2000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 52 x 28 T-slot spacing: 500 Number of grooves: 8 x 8 Edge distance: 250 Weight: 6700 kg Casting quality HT250 Flatness less than 0.12 mm Bsfvnehlghw Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Year of construction: 2011, Condition: excellent (used), Mechanical swing bending machine Fab. Schröder Typ. MAK 3 4000 x 1,5 Year 2011 Technical data Make: Schröder Type: MAK 3 Year of manufacture: 2011 working length: 4020 mm Power at 400 N/mm²: 1,5 mm stroke upper beam: 250 mm lowering of bending beam: 80 mm angle: 0 - 180 Fatqn9Dlr power requirement: 6,0 kW weight: 4860 kg Dimension: L 5,2 x W 1,2 x H 1,7 m Equipment - Control POS 400 NC - piece counter - foot switch - rail quick clamping system - manual back gauge 750mm, optional - 1x set of split cutting tools 90mm - 2 pcs. bending rails 10mm, 25mm - hydraulic upper tool clamping All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting Cmfjidfm3G There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: good (used), Technical data: maximum cutting width: 4050 mm Cpmvj8L9Sg maximum cutting capacity steel St40: 13 mm maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: good (used), back gauge: 1,000 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,100 mm, Sheetlength: 3.100 mm Bji70Goevex Cutting capacity: 6 mm Backgauge reach: 1.000 mm Featured with: - Sheet support backside - 3 Sheetsupports frontside - Footpedal Country of origin: France Motor power: 7,5 kW Machine LxWxH: 3.800 x 2.100 x 1.860 mm Machine weight: 6.000 kg

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor, chip conveyor, chip conveyor -Conveyor belt: conveyor belt with base -Speed: 41 m/min -Strap width: 480 mm -Conveyor length: approx. 4000 mm Givd0Ptj -Motor/gearbox: SEW Vector, 0.55 kW / 110 rpm -Total dimensions: 4540/730/H1090 mm -Weight: 300 kg

Year of construction: 2014, Condition: good (used), Make: WOHLENBERG Type: B-1000 Cro0Owt3R3 Control: SIEMENS 840D Year: 2014 incl. Boring shaft 75 x 5900 incl. Boring shaft 94 x 5900 incl. Boring shaft 106 x 5900 incl. Boring shaft 130 x 5900 Specifications Metric US Standard Max. drill Ø steel 250 mm Spindle bore 100 mm Drilling depth 4000 mm Power on spindle 63 kW Speeds / ranges 750 Rpm Dimensions (Estimate) Length 18000 mm Width 3800 mm Height 2100 mm Weight 35000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: Cmfikjp0L3 - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: excellent (used), Year of construction: 2000, Technical data: max. cutting width: 4050 mm max. cutting capacity for steel: 0.5 - 8.0 mm max. cutting capacity for stainless steel: 6.0 mm motor. adjustable rip fence: 1000 mm programmable cutting gap adjustment programmable cutting angle adjustment: 0.4 - 2.1° Eavus02 NC-Steuerung / NC-control: AMADA Number of clamps: 21 pcs. Motor power: 15 kW Dimensions (length x width x height): approx. 4800 x 2200 x 2150 mm Weight: approx. 12 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: used, Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm Qlxerqdgl -Weight: approx. 800 kg

Condition: good (used), Make: BOLDRINI Type: RIBO 18 HY Equipped with forming roll radius 350 head Euipped with turning cutting attachment Machine for making smooth surface dished and flanged ends. Designed for cold & hot forming such as: ASME 2:1 Elliptical Dished only Hemispherical ASME Flanged & Dished Specifications Metric US Standard Max. workpiece Croyzcah3I 4000 Ø Maximum sheet thickness 18 mm Max. dishing radius 350 mm Min. product Ø 400 Min. plate thickness 3 mm Min. dishing radius 30 mm Dimensions (Estimate) Length 5000 mm Width 1900 mm Height 2930 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Technical data: Working width: 4000 mm Bsfwk737Wrw max. bending capacity: 10.0 mm max. bending: 8.0 mm Diameter top roller: 305 mm Diameter of side bottom rollers: 305 mm Diameter of middle bottom roller: 265 mm conical bending device due to inclined position of the two side rollers Hardened rollers Hydraulic folding bearings lateral bending aid on the right-hand side mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Own weight: approx. 17 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Revision in 2024 Center height: 630 mm max. turning diameter over bed: 700 mm max. diameter over carriage: 350 mm Center width: 2000 mm Revolutions: 11 - 1800 rpm spindle bore: 71 mm Bed width: 335 mm Position display (X, Y): HEIDENHAIN Motor power: 15 kW Dimensions (length x width x height): approx. 4000 x 1300 x 1800 mm Weight: approx. 3.9 tons Brmt8L2Ymkc Accessories Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: good (used), Technical data: Working length: 4060 mm Bod0Xjnlpve Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 graphic 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 - 180 motorized backgauge adjustment: 10 -1500 mm Max. opening of bending beam: 300 mm Bending and lower beam adjustment range: 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2008, Technical data: max. cutting width: 4050 mm max. cutting capacity for steel ST40: 8.0 mm max. cutting capacity for stainless steel: 6.0 mm motor. adjustable rip fence: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet metal holding device Motor power: 15 kW Dimensions (length x width x height): approx. 4800 x 2200 x 2150 mm Brjqd0Kmik Weight: approx. 11.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2009, Technical data: maximum cutting width: 4050 mm maximum cutting capacity Sathl: 6.0 mm motorized adjustable rip fence autom. adjustable kerf adjustment CNC control: SC100T Pnrhzlyggv roller conveyor back CE mark Dimensions (length x width x height): approx. 4400 x 2300 x 1950 mm Weight: approx. 10 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 2013, Condition: excellent (used), Technical data: maximum cutting width: 4080 mm maximum cutting capacity steel: 20,0 mm CNC control: DURMA TOUCH 7 cutting gap adjustment Hylcrbkj cutting angle adjustment adjustable rip fence stroke: 280 mm number of strokes: 5 - 8 /min. dimensions (length x width x height): approx. 5900 x 3800 x 3050 mm weight: approx. 30 tons The seller is not responsible for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 1975, Condition: used, Functionality: fully functional, Available immediately! Guillotine shears, model ND 3316 A Manufacturer: STANKOIMPORT Manufacture date 1975 Djr38N Max dimensions of cut sheet metal: 2000 x 4 mm