SK50T hydraulic workshop press SK 50 T

Call

60 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Cx2znug0 Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Negotiable price: € 5.250,-- net ex stock Offer consists of: + 16 pcs. frames pre-assembled, depth 50 cm, height 3 m + 90 pcs. beams, length 3,7 m, 1000 kg load/slot + 180 pcs. suspension locks + 64 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arran...

Listing

Tönisvorst

7631 km

Reductions (28359)

SK 50 auf MK 2-3-4-5

excellent (used)

€90

Call

Reductions SK 50 DIN 2080 Reductions from SK 50 to : MK 2 MK 3 MK 4 MK 5 other sizes and quantities on request Ebkzcvz

Listing

25 lfm H 2,5 T 50 cm Feldlast 9000 kg Träger mit Auflast/Fach 1000 kg

Aumühle

8268 km

Reifen Regal

25 lfm H 2,5 T 50 cm Feldlast 9000 kg Träger mit Auflast/Fach 1000 kg

good (used)

€1,950

Call

25 running meters tire rack Used, very good condition, see pictures height 2,5 m depth 50 cm, field load 9000 kg beam length 2,1 m Beam with superimposed load / compartment 1000 kg Negotiable price: € 1.950,-- net ex stock Offer consists of: + 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m + 66 pcs. beams, length 2,1 m, 1000 kg payload/slot + 132 pcs. suspension locks + 24 pcs. concrete anchors Load plates Other composition on request! Goods are in stock. Transport and as...

Listing

VUREN

(dealership location)

7520 km

Reefer/Isolated/Freeze

Schmitz Cargobull SKO 24 PALLETBOX carrier 1950 multi t

2017

used

€33,950

Listing

Pongratz RK 2600/15 T-AL 2,57x1,51m 2500kg Rückwärtskipper

Nieder-Olm

(dealership location)

7819 km

Tipper

Pongratz RK 2600/15 T-AL 2,57x1,51m 2500kg Rückwärtskipper

new

€3,773

Listing

Scania T143 450 V8 T 143 6x4 450 WSK TORPEDO

OOSTERHOUT

(dealership location)

7521 km

Other

Scania T143 450 V8 T 143 6x4 450 WSK TORPEDO

1989

used

€37,500

double-column hydraulic press

Listing

Staufenberg

7810 km

Fabr. Unbekannt Presskraft 150 t

good (used)

Call

Hydraulic Double Column Press Make Unknown Qwfk7ozl Technical data: Pressing force 150 t / 0 - 600 kp/cm². Cylinder diameter 260 mm stroke 500 mm table size 800 x 800 mm installation height 780 mm drive power 15 kW outer dimensions ca 2250 x1400 x 3000 mm weight ca 6,2 t Functions - with and without throttle - with and without ejector - lower and upper piston - set up - Injection press 0-10 - quick press 0 - 150 sec. - with and without venting - T-slots in upper and lower table used, in good co...

Listing

Pongratz 3-SKS 3100/17 T 3,07×1,76×0,40m 3500kg

Nieder-Olm

(dealership location)

7819 km

Tipper- three-way

Pongratz 3-SKS 3100/17 T 3,07×1,76×0,40m 3500kg

new

€6,546

Listing

50 lfm Palettenregal Nedcon H 7 m T 110 cm Auflast /Fach 3050 kg

Aumühle

8268 km

50 rm pallet rack Nedcon

50 lfm Palettenregal Nedcon H 7 m T 110 cm Auflast /Fach 3050 kg

like new (used)

€10,150

CNC Lathe 3000/2200 x 15000 x 100 T

Call

50 rm pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 7 m Depth 110 cm, blue Beam length 2.7 m orange girder with load /shelf 3050 kg Negotiable price: € 10.150,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 7 m +144 pcs. beams, length 2,7 m, 3050 kg payload/slot +288 pcs. suspension locks + 38 pcs. concrete anchors Load pl...

Listing

Babberich

7577 km

Skoda SR3-220 CNC

1997

good (used)

Call

Make: SKODA Type: SR3 - 220 CNC Control: Siemens 840 Year: 1997 Double carriage support with double lamella tool holder capto sandik Double carriage is Hydrostatic Double SIEMENS 840 control on each carriage platform 6 units Steady rest open C-Type 2 units lamella slide inserts 8 units heavy tailstock centers Specifications Metric US Standard DBC Turning Length 14500 mm Swing over bed Ø 3000 mm Swing over cross slide Ø 2200 mm Spindle bore 90 mm Spindle power 2 x 75 kW Bed width 3150 mm Tail...

Listing

Schwabach

8026 km

Holders / cutter holders (1) ,

ISO 50 - SK 50

used

Call

Tool trolley mobile (No. 1) , complete Ktqvxneh with cassettes . Content : cassettes , ISO 50 , incl. 1 pcs Wohlhaupter (knock-out head) . .....

Listing

Jung Heinrich Typ T 2.700 mm / K: 120 x 50 mm / Fachlast: 2.700 Kg

Neukamperfehn

7570 km

Pallet rack truss cross beams shelf

Jung Heinrich Typ T 2.700 mm / K: 120 x 50 mm / Fachlast: 2.700 Kg

excellent (used)

€29

Call

Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Racking system: Jung Heinrich Type: T Included in delivery are: 01x pallet rack traverse, used Material color: orange Bzqhov9o Type of truss: HN 120|20 box profile: 120 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal be...

Listing

Wiesbaden

7819 km

Fiber Laser, 50 watts

SK LASER GmbH F50iW1 KOLLTRONIC

2022

as good as new (ex-display)

€32,900

Production line for medical masks

Call

Fiber laser F50iW1 in workstation / housing Year of construction workstation: 2022 Warranty: 6 months The machine may differ slightly from the machine shown. Laser safety class 1 Power: 50 watts Brand: KOLLTRONIC Made in Germany Laser medium: diode-pumped fiber laser, Yb Wavelength: 1064 nm Marking field: 170 x 170 mm Cooling: air Combined seat and stand workplace. Front door with laser safty protection glass = view of the workpiece. Work room is illuminated. Z-axis motorized. Quick position...

Listing

Borken

7623 km

Temperature test chamber

CTS T-65/50

excellent (used)

Call

CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Temperature test chamber type: T-65/50 air cooled Control system: Microprocessor controlled regulation and monitoring system. simple, user-friendly terminal built into the door Digital set and actual temperature display simple variation via +/- key digital input for temperature in °C SPS compatible up to 100 test programs possible interface RS 232 2 free switching channels for on-site test material control EMV-tested...

Listing

Richpeace RPUM-NF28-4USW-2-10X10-T-VSA-LF1500...

Vilnius

8376 km

Richpeace RPUM-NF28-4USW-2-10X10-T-VSA-LF1500...

2020

excellent (used)

€15,000

Spindelmodul Servomodul Versorgungsmodul

Call

GREAT OFFER!!! Complete solution for disposable medical masks production. Fully automated surgical mask machine with two conveyor tracks. Suitable for 3 layers disposable masks. Real Maximum output approx. 40-60 masks per minute. Used like new !!! Premium manufacturer with some OMRON, FESTO, SAMSUNG, NSK components included. Eqd9wgt Price: on inquiry, but including materials to start producing IIR type masks.

Listing

Borken

7623 km

Temperature test chamber

CTS T-65/50

excellent (used)

Call

CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Temperature test chamber type: T-65/50 air cooled Control system: 32 bit controller LDC control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Interface RS 232 free switching channels for on-site test material control test chamber volume: 65 liters Test chamber dimensions: height approx. 400 mm, width approx. 400 mm, depth approx. 320 mm Overall dimensions: He...

Listing

BOSCH VM 60 R / SPM 25 T / SM 10-20 / SM 25-50

Bensheim

7860 km

BOSCH VM 60 R / SPM 25 T / SM 10-20 / SM 25-50

ready for operation (used)

Call

Bosch Kondensatormodul KM 1100 - T 6005 04 512023 00 Versorgungsmodul VM 60 R - T 6005 04 512026 00 22kn0cvz Spindelmodul SPM 25 - T 6005 04 610120 00 Servomodul SM 10 / 20 - TC 6005 04 512034 00 Servomodul SM 10 / 20 - TC 6005 04 512034 00 Servomodul SM 10 / 20 - TC 6005 04 512034 00 Servomodul SM 25 / 50 - TC 6005 04 512035 00

Listing

Wiefelstede

7607 km

Vertical Machining Center

Enerpac Hub 155 mm

used

Call

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons Dgo23zh -Stroke: 155mm -Piston rod: Ø 80 mm -Shots: inside 145 x 50 mm, see photos -Number: 7x cylinder available -Price per piece -Dimensions: 850/160/H420 mm/ 810/155/H415 mm / 515/150/H500 mm / 815/150/H630 mm -Weight: 68kg // 66kg / 62kg / 65 kg

Auction

Luckenwalde

7960 km

Deckel Maho DMU 50 T

2001

good (used)

22 days left

Details

Listing

Metzingen

7973 km

milling machining centers - vertical

DECKEL MAHO DMU 50 T

1999

used

Call

x-travel 500 mm y-travel 400 mm z-travel 400 mm Control HDH TNC 426 M Ete3zsf total power requirement 12 kW weight of the machine ca. 3,2 t dimensions of the machine ca. m

Listing

Friedberg

8081 km

Linde H 50 T EVO 394 02

2018

used

€27,750

Call

Cabin ref: ANL1002935 Vehicle: double auxiliary hydraulics, Mast: double auxiliary hydraulics, pressureless circuit, Other attachment KAUP 4,8T 160 BZA width 1350 mm, full cab, heating, gas tank, tires front axle: SE, 300-15, tires rear axle: SE, 250-15, 4 x LED working lights front, 1 x LED reversing lights rear, dust cover higher, tilt cylinder protection, roof guard, panoramic mirror, steering column height adjustable, driver's seat air-suspended (fabric cover), front and roof blind, fork wea...

Listing

Stuhr

7655 km

Sideloader

Bulmor DQn 50/16/81 T

2018

used

€52,500

Call

Sideloader Capacity: 5000kg Load Centre: 800 Lift height: 8100mm Free lift: 2750mm Overall Length: 4600mm Overall width: 2450mm Closed height: 3600mm Overall weight: 8140kg Mast type: Triplex Fork length: 1580mm YOM: 2018 Condition: good Transmission: Hydrostat Engine: Deutz Lxz3yafph Bereifung vorne Typ: Super Elastic Bereifung vorne Grösse: 2 x 355/45-15 Bereifung vorne Zustand: 20 - 40% Bereifung hinten Typ: Super Elastic Bereifung hinten Grösse: 2 x 355/45-15 Bereifung hinten Zustand: 20 - 4...

Listing

Remscheid

(dealership location)

7683 km

Knoll engine

Knoll KTS 50-120-T Schraubspindelpumpe

ready for operation (used)

€874

Call

Knoll KTS 50-120-T screw pump, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cj2qwrogbh

Listing

Wiefelstede

7607 km

Straightening Press - Double Column

Bahco CDXR 50-125 Hub 125 mm

used

Call

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Manufacturer: Bahco, hydraulic pulling cylinder type CDXR 50-125 -Traction force: approx. 50 t -Stroke: 125mm Sbidr -Piston rod: Ø 50 mm -Operating pressure: max. 800 bar -Recordings: inside 150 x 50 mm, see photos -Number: 2x cylinder available -Price per piece -Dimensions: 925/125/H165 mm -Weight: 32 kg /pc.

Listing

7870 km

Knuth 50 t

used

Call

Listing

Karlsbad

7905 km

Machining Center - Universal

DECKEL DMU 50 T

2000

used

Call

x-travel:500 mm y-travel:400 mm z-travel:400 mm number of spindle speeds:9000 1 / min F92raql tool taper:SK 40 control:HEIDENHAIN TNC 426 / 430 tool change unit:16 Pos. table-size:700 x 500 mm weight of the machine ca.:3,5 t CNC universal machining center, manually round-swivelling-table with digital readout for B- und C-axis, working plane transformation, coolant system el. handwheel HEIDENHAIN infrared-measuring-system HEIDENHAIN TS 631 airblast outside, Ethernet interface, mode4, flushgun...

Listing

Friedberg

8081 km

Linde H 50 T/600 EVO 394 02

2015

used

€26,500

Machining Center - Universal

Call

Cabin ref: ANL1071765 Vehicle: double auxiliary hydraulics, mast: double auxiliary hydraulics, double pallet clamp DPK 48 C, width 1400 mm, full cab, heating, gas tank, tires front axle: SE light, 355/65-15, tires rear axle: SE light, 250-15, 2 x LED working lights front, 1 x LED reversing lights rear, pressure accumulator, panoramic mirror, holder with writing plate, steering column height adjustable, access control: key switch, driver's seat super comfort (fabric cover), lift mast positioning ...

Listing

Oelde

(dealership location)

7696 km

DECKEL MAHO DMU 50 T

1999

used

Call

x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426 / 430 Heidenhain Main spindle: turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper SK 40 B2bw8lg9c0 swiveling-rotary-table: table diameter 700 x 500 mm swivellable B: 105° (-10°/+95) ° rotatable C: 360 ° max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H6 mm Tool-Presetter: number of toolpositions...

Listing

Heidenhain TS 512 Meßtaster SK 50 Id.Nr. 236346-02

Remscheid

(dealership location)

7683 km

Heidenhain component

Heidenhain TS 512 Meßtaster SK 50 Id.Nr. 236346-02

ready for operation (used)

€786

Call

Heidenhain TS 512 probe SK 50 Id.Nr. 236346-02 , serial no. according to photo, used, one dent in cover, otherwise normal traces of use, 100% functional, scope of delivery according to photos Cj7j2z9kjb

Listing

Wiefelstede

7607 km

Milling mounts SK40

Eroglu SK 40-12-50

used

Machining centers (vertical)

Call

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Eroglu, milling mount surface chuck SK40 D2lnyl7 -Type: SK 40-12-50 DIN 2080 01150P500688 -Milling tool holder: Ø 12 mm -Dimension: Ø 63 x 144 mm -Weight.: 1.0 kg

Listing

South Korea

10754 km

DECKEL MAHO DMU 50 T

2003

ready for operation (used)

Call

Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 10000 Tool taper SK 40 Cri9owkysn Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm This DECKEL MAHO DMU 50 T Vertical Machine Center was made in the year 2003. It is equipped with a HEIDENHAIN iTNC 530 control unit. The machine has a spindle speed of 10000 rpm. Application Types Milling

Listing

Burghaun

7859 km

Sideloader

Bulmor DQnr 50-14-65 T

2022

used

Call

Sideloader Serial N°: BSD Capacity: 5000kg Load Centre: 700 Lift height: 6000mm Free lift: 1930mm Overall Length: 4500mm Overall width: 2230mm Closed height: 2900mm Overall weight: 9400kg Mast type: Triplex Fork length: 1400mm YOM: 2022 Condition: New Transmission: hydrostatisch Engine: Deutz Bereifung vorne Typ: Super Elastic Bereifung vorne Grösse: 28x12.5-15 Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Grösse: 28x12.5-15 Jkolonbn Bereifung hinten Zus...

Listing

Friedberg

8081 km

Linde H 50 T EVO 394 02

2017

used

€38,900

Machining Center - Universal

Call

Cabin ref: ANL1000605 Vehicle: double auxiliary hydraulics, mast: double auxiliary hydraulics, triple clamp DURWEN DRPK 45 C, width 1.630 mm, full cab, heating, gas tank, tires front axle: SE, 300-15, tires rear axle: SE, 250-15, 4 x LED working lights front, 1 x LED reversing lights rear, lighting system with parking and driving lights, brake lights and indicators (LED) incl. Ausr. STVZO, speed limit: 20 km/h, panorama and exterior mirrors, holder with writing plate, steering column height adju...

Listing

Oelde

7700 km

DECKEL MAHO DMU 50 T

2000

used

Call

x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426 Heidenhain Main spindle: turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper SK 40 swiveling-rotary-table: table diameter 700 x 500 mm swivellable B: 105° (-10°/+95) ° rotatable C: 360 ° max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H6 mm Tool-Presetter: number of toolpositions 16 pos. tool tap...

Listing

Twist

(dealership location)

7581 km

Forklift

Linde H 50 T 02 EVO

2019

ready for operation (used)

Call

Commission 46453-42 Load capacity 5000 kg Drive type propellant gas Mast type Triplex Lifting height 4675 mm Overall height 2375 mm Free lift 1614 mm Forks 1200 mm technically very good optically very good tires_front 300 x 15 SE tires rear 250 x 15 SE special equipment 3rd valve, 4th valve, working light rear, working light front, heating, full cab, safety light H8otmfv

Listing

Wiefelstede

7607 km

welding cable

Dinse DIX SK 50-70 25 m

used

Call

Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device -Length: 25m 887fmzm -Plug: 4-pin -Transport dimension: 570/480/H130 mm -Weight: 17.8 kg

Listing

Schorfheide

7936 km

Asphalt mixing plant

Sonstige/Other Marini IRON T BOX 50

2023

new

Call

**Additional options and accessories** **Notes** MARINI IRON T-BOX 50 MOBILE ASPHALT MIXING PLANT Year of construction: 2021 Operating hours: New - Production capacity: 50 to./h. Dzp8yerj0 - CE Certificate - Mobile: 1x sea container 40' HC - Feed hopper: 3 - Capacity: 5 m³ - Drying drum: continuous - Burner: Marini CF 04 with 7,3 MW - Mixer: rotating - filter system: 180 m² filter area - control cabin with automatic and manual control system Marini - 1 year warranty ...

Listing

Schwäbisch Gmünd

(dealership location)

7985 km

Machining Center - Vertical

HURCO VMX 50 / 40 T

2004

used

Call

x-travel 1270 mm Cirfci9a3p y-travel 660 mm z-travel 610 mm Control Ultimax 4 table load 1300 kg turning speeds 10.000 U/min tool change unit 24-fach tool taper SK 40 Drive 15 kW table-size 1500x660 mm total power requirement kW weight of the machine ca. 9 t dimensions of the machine ca. 4,8x4,5x2,95 m swarf conveyor internal coolant Operating hours: 57,000 h Working hours: 23,776 h - Advanced 3D milling - Importing DXF data - Helix - Synchon thread milling - Pocket milling - UltiNet

Listing

Friedberg

8081 km

Linde H 50 T EVO 394 02

2019

used

€46,900

Call

Cabin S2ukr ref: ANL1000411 Vehicle: double auxiliary hydraulics, mast: double auxiliary hydraulics, full cab, heating, gas tank, tires front axle: SE light, 355/65-15, tires rear axle: SE light, 250-15, 2 x LED working lights front, 1 x LED reversing lights rear, lighting system with parking and driving lights, brake lights and turn signals (LED), dust cover higher, panoramic mirror, holder with writing plate, steering column height adjustable, access control: Key switch, driver's seat super co...

Listing

Wiefelstede

7607 km

Enerpac Hub 140 mm

used

Call

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 140mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece Rjzbz -Dimensions: 810/155/H415 mm -Weight: 66 kg/pc.

Listing

Wiefelstede

7607 km

Enerpac Hub 150 mm

used

Call

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder Cmliw3ceel -Hydraulic pulling cylinder: with integrated hand pump -Traction force: approx. 50 t -Stroke: 150 mm -Piston rod: Ø 80 mm -Recordings: inside 150 x 50 mm, see photos -Number: 8x cylinder available -Price per piece -Dimensions: 810/155/H480 mm / 820/150/H585 mm -Weight: ca. 65 kg /pc.

Listing

Wiefelstede

7607 km

Krantraverse 50 t

Mehler ZDR 5420/390/H1280 mm

2014

used

Call

Adjustable traverse, crane traverse, indoor crane, crane hook traverse, load traverse, heavy-duty traverse, equalizing traverse, beam traverse -Manufacturer:Mehler, heavy-duty traverse type ZDR for transporting a wide variety of loads Isplliq -Load capacity: 50000 kg -Dimensions: see photos -Transport dimensions: 5420/390/H1280 mm -Own weight: 2400 kg

Listing

Wiefelstede

7607 km

Enerpac Hub 110 mm

used

Call

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons 3uokrofizc -Stroke: 110mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.

Listing

Wiefelstede

(dealership location)

7608 km

Heater fan

Remko PRT 50 T

used

€300

Call

Fan heater, mobile heater, gas heater, gas fan -Power: adjustable 50 KW Vqlpsa -Connection pressure: 0.35-1.5 bar -Air flow rate: 1000 m³/h -Weight: 20 kg

Listing

Wiefelstede

(dealership location)

7608 km

Tension blow fan 18.5 kW

Rippert 32 T 50

1984

used

€2,450

Call

Radial fan, chip extractor, fan, suction, chip fan Uuxkhabb -Motor power: 18.5 kW -Speed: - rpm -Volume flow: - m³/h -Connection input: Ø 310 mm -Connection output: Ø 400 x 300 mm -Dimensions: 1600/1100/H1000 mm -Weight: 230 kg

Listing

Wiefelstede

(dealership location)

7608 km

Collet chuck SK50

Holex SK 50-2/20-63

used

Call

Collet holder, tool holder, tool holder, milling holder, milling tool Mrej7 -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-2/20-63 -DIN: 2080 -No.: 0108016995 -Weight: 2.9 kg

Listing

Wiefelstede

(dealership location)

7608 km

Collet chuck SK50

Holex SK 50-3/32-73

used

Call

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves Yral78 -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Listing

Wiefelstede

(dealership location)

7608 km

Milling holder SK50

Kelch Adapter SK-50-4

used

€50

Call

Tool holder, milling holder, milling tool -Adapter -Adjustment: SK50 -Tool holder: MK4 3tehcscjr -MK4 with tightening thread -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 1x recordings available -Price: per piece -Weight: 4 kg/piece

Listing

Wiefelstede

(dealership location)

7608 km

Collet chuck SK50

Kelch 9803-SK 50 4-32

used