SCREEN CHANGER KREYENBORG K-SWE-101/121/RS

SIEBWECHSLER KREYENBORG K-SWE-101/121/RS

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. Cjycca7Rn9 screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit Bfj0U0Sac0 pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * 2Uezt3 Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: refurbished (used), Functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Double Piston Filter Qlu77 - - Immediately available, on request also with control, hydraulic unit. When making your request, please let us know your desired capacity and the material so that we can offer you the right filter.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Boawlchhxhj Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, swivel angle A-axis (min.): -110 °, swivel angle A-axis (max.): 90 °, Hedelius 5-axis machining center 2Jxsoxn TECHNICAL DETAILS Control: CNC Heidenhain iTNC 530 X-path: max. 1,200 mm Y-path: max. 650 mm Z-travel: max. 520 mm Traverse path rotary swivel range in X: max. 500 mm Fixed machine table travel range in X: max. 570 mm A-axis: +90° / -110° C-axis: 360° Tables Swivel rotary table dimensions: 520 × 420 mm Interfering edge diameter: max. 610 mm Fixed table dimensions: 700 × 600 mm Spindle and tool Spindle holder: SK 40 Speed: 30 - 8,000 rpm Drive power: 22 kW Tool changer: 30-fold MACHINE DETAILS Machine weight: approx. 8,500 kg Dimensions: 3,600 × 2,650 × 2,800 mm EQUIPMENT - NC rotary swivel table on the right - Fixed table on the left - Electric handwheel - IKZ (20 bar) - Chip conveyor

Condition: excellent (used), Year of construction: 2008, Control: Heidenhain iTNC 530 Total travel X-axis 2,300 mm Y-axis 800 mm Z-axis 600 mm Fixed table working range: G0Ctpyz X-axis 925 mm Y-/Z-axis 800 / 600 mm Clamping surface 1,400 x 750 mm Rotary table travel: X-axis 800 mm Y-/Z-axis 800 / 600 mm Clamping surface Ø 800 x 630 mm Tool holder: SK 40 Tool magazine: 56 compartments Spindle speed Celox motor spindle: 50 - 12,000 rpm Accessories - HR 410 hand-held control unit - IKZ with paper belt filter-900 liters - Scraper belt conveyor - 3D radio touch probe Renishaw RMP 60 - 2x suction unit LTA - Machine hood Garwels machines and service The right choice We would be happy to provide you with a quote for our additional services - transportation - Installation of the machine - Commissioning - Instruction We are exactly the right contact for - repair - maintenance - service Please also visit our website www garwels de

Condition: used, Year of construction: 1974, min. module 1 max. module 10 voltage 220/380 V frequency 50 Hz total power requirement 14 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,5 x 2,3 x 1,8 m 1) Working area: - Largest module to be milled: 10 - Largest travelling distance of the table slide: 695 mm - Largest centre distance: 870 mm - Largest workpiece diameter dk2: 300 mm - Smallest number of teeth that can be milled z2min Machine with 2-speed indexing gear: 4 Machine with 1-speed indexing gear: 8 2) Dimensions: - Bore of dividing head spindle: 145/141 mm - Centre distance between milling cutter and workpiece min. 50 mm max. : 170 mm - Largest clampable hobbing cutter Length b1: 170 mm Diameter dk1: 150 mm - Diameter of cutter arbours (standard accessories): 32, 40 mm - Drive taper for milling arbours: 5 Morse taper - Taper for tailstock centre: 4 Morse tapers - Largest tangential path i+: 60 mm Dpoeqz 3) Speeds and feed ranges: - Milling cutter speeds: 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355 rpm - Axial feed: 0.25 .... 4 mm/WU - Radial feed: 0.175 .... 0.995 mm/WU

Year of construction: 1980, Condition: used, machine/vehicle number: 80-213, Duplicator with mixer for cooking with steam generator, capacity 2x500l. Gxcc0Se

Condition: excellent (used), Year of construction: 2004, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; Cdouxyicpc voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: good (used), Technical data of the pallet rack traverse: Manufacturer: SLP Type: head traverse Included in delivery are: 01x pallet rack traverse, used Material color: blue Type of truss: RTS 90 box profile: 90 x 50 mm agraffe: 3 HK (hooks) clear width: 2.600 mm max. load per truss pair 2.000 kg, with evenly distributed load Bcb7Oiplmvx 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Mileage: 72,502 km, power: 265 kW (360.30 HP), first registration: 04/2019, overall weight: 18,000 kg, fuel type: diesel, axe configuration: 2 axles, next inspection (TÜV): 04/2025, gearing type: mechanical, emission class: euro6, Condition: used, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Steering arrangement right September 2023: Engine 3124h ASR, BrakeMatic, single horn, MAN BrakeMatic, Emergency Brake Signal (ESS), ESP, MAN Tronic, Lane Guard System IV can be switched off, Without Emergency Brake Assist (EBA), RIO Box, MAN Media Truck 7' Display Navi without SD card Two engines Variant with John Deere superstructure engine (EuroMot IIIB), Double-sided sweeping material pick-up, High-pressure washing system 160 bar (125 L/min), Hydr. Rear suction hose boom, gross volume 7.6 m3, water system approx. 2,150 (SB) + 1,000 liters (in front of SB), weed brush. Rear surface suction with flat jet and rotary jet nozzles. Bsa0Dqnheu

Mileage: 34,126 km, power: 265 kW (360.30 HP), first registration: 10/2020, overall weight: 18,000 kg, fuel type: diesel, axe configuration: 2 axles, next inspection (TÜV): 05/2025, gearing type: mechanical, emission class: euro6, Condition: used, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Steering arrangement RIGHT 1067 operating hours 8 m³ sweepings container with tailgate and sieve, tipping angle approx. 55°, chrome steel dirt chute, pneumatic air shut-off on suction hose, tiltable suction mouth, hydraulic disc brushes, central roller brushes, 2150 liter water tank, 7?? color display, RIO Box, MAN Media Truck 7' display navigation system without SD card, winter service lighting on the cab, two JCB 93 kW Tier 4 engines for double-sided dirt collection, simultaneous sweeping and double-sided dirt collection, disc brush retractable on the left, infinitely variable speed regulation on the roller brush, 2 LED ASW left + right, 2 additional ASW at the rear of the hopper, camera system, RKL, 125 liters per minute at 160 bar water pressure, rotating nozzles in front of the rear suction, water tank approx. 2150 liters + additional tank 1000 liters Bsayh7Ccea

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS The scope of delivery includes: 01x pallet racking beam, used incl. inner support bracket f. Chipboard thickness up to: approx. 38 mm Material color: orange Box profile: 110 x 40 mm Dpeig7 Agraffe: 4HK (hook) Clear width: approx. 3,000 mm 02x safety pins, used Version: completely galvanized For securing the side rails against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), We offer you here a used pallet rack traverse O7Ytl of the manufacturer Meta (Thyssen) for sale. Technical data of the pallet rack traverse: Racking system: Meta (Thyssen Umformtechnik) Included in delivery: 01x pallet rack beams, used material colour: yellow box profile: 140 x 50 mm type of agraffes: 4 HK (hooks) clear width: 3.500 mm max. load per truss pair 3,100 kg, with evenly distributed load 02x securing pins, used design: completely galvanized For securing the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Redirack The scope of delivery includes: 01x pallet rack beam, used Material color: yellow Box profile: 100 x 50 mm Design: Head cross member Bojtyrtlmp9 Clear width: 2,810 mm Max. load per pair of beams 2,100 kg, with evenly distributed load 02x locking pins, used Version: completely galvanized For securing the longitudinal beams Against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total length: 800 mm, total width: 575 mm, workpiece height (max.): 215 mm, The Mitsubishi FX 10 K wire EDM machine for sale (year of manufacture 12 98) with Hirschmann clamping system was used in the field of injection mold making and medical technology in very tight and difficult tolerances, which the machine performed to the fullest satisfaction. We offer you the opportunity to inspect the machine under power at our premises to see for yourself how this very well-maintained and geometrically perfect machine works. The machine is in perfect condition and is being sold together with the proven Hirschmann clamping system, which is as good as new (new value approx. EURO 10 000.--). There is also an automatic alignment block for precise vertical alignment of the wire and for determining the angles. Mitsubishi is a manufacturer that is represented worldwide in this field and has a long tradition. Cqjfcnriue Technical data: The Mitsubishi FX 10 K is designed for endurance and consistent performance to withstand the pressure of continuous, demanding production cycles. It is capable of machining a wide range of materials, including carbides and exotic alloys, and offers manufacturers the flexibility to tackle a variety of projects. The machine's control system not only simplifies operation, but also maximizes the efficiency and productivity of the EDM process, ensuring that every component meets very high quality standards. X-axis 350 mm Y-axis 250 mm Z-axis 220 mm Workpiece length 800 mm Workpiece width 575 mm Workpiece height 215 mm Max. Workpiece weight 500 kg Control type Mitsubishi 32 bits Tank length 630 mm Tank width 530 mm Smallest wire diameter used wire diameter 0.15 mm Diamond wire guides (top and bottom) For wire diameters 0.3 mm - 0.25 mm - 0.2 mm - 0.15 mm Machine length x width x height 2100.0 × 2100.0 × 2230.0 mm Weight 1850 kg Training documents / operating instructions / technology book (E) Available (partly E/D) Various consumables available (e.g. Ultra Clean filter cartridge, 50 l deionization resin & various brass wire rolls, new ceramic insulator plate, etc.) Price EURO 8800.-- ex works & 19 % VAT Dismantling / packing / loading by a specialist company such as Broziat Singen - could be organized by us for a fee.

Axe configuration: 2 axles, wheelbase: 7,700 mm, loading space length: 11,070 mm, loading space width: 2,470 mm, loading space height: 2,680 mm, first registration: 10/2011, suspension: air, color: white, tire size: 385 / 65 / R22.5, Year of construction: 2011, Condition: used, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Disk Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 60%; Tyre profile right: 60% Measures Dimensions (LxBxH): 1130 x 255 x 395 cm Weights Empty weight: 6.900 kg Carrying capacity: 23.100 kg GVW: 30.000 kg Ckfhnf9I3M Functional Tail lift: Dhollandia DHLM.35, tail lift, 2500 kg Make of bodywork: Lamboo Carrosserie Plywood Box Maintenance APK (MOT): tested until 07/2025 Condition General condition: good Technical condition: good Visual appearance: good

Condition: refurbished (used), Year of construction: 2015, Retrofit 2015 Karstens K 52 cylindrical grinding machine, CNC control Eckelmann ENC 66, Workpiece length 650 mm, Dpoxxp Weiss Schleiftechnik retrofit 2015, Expansion through automation 2023, Spindle power 7.5 KW, Center height 180 mm, Ø grinding wheel 500 mm, straight / angular grooving, filter system, Auto. Loading between the centers, Prismatic belt blank / finished part

Condition: used, Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, motor voltage: 400 V, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Crlwryalfc Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Dpfled Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: reconditioned (used), Year of construction: 1987, grinding diameter 360 mm grinding length 650 mm centre height 180 mm spindle taper MK 4 speeds of grinding spindle 1600 U/min turning speed range - workpiece spindle 30 - 450 U/min power capacity - grinding motor 4 kW dimensions of grinding wheel Ø 400 x 100 x 127 mm max. width of grinding wheel 60 mm max. workpiece weight between centers 250 kg taper in tailstock-quill MK 4 weight of the machine ca. 3,5 t dimensions of the machine ca. 3,02 x 1,57 x 1,80 m coolant tank 1,02 x 1,02 x 0,90 m switchgear cabinet 1,12 x 0,81 x 1,70 m - Serial No.: 8606606111 - rapid traverse - internal grinding device - dressing device - coolant equipment Sda3Mpwken - Machine partly reconditioned incl. geometry check

Condition: good (used), Motor: 2.2 kW Bhfyxjn Extraction capacity: 1800 m3/h

Year of construction: 2022, Condition: new, SEMI-AUTOMATIC GREASEPROOF FERMENTER FOR 60 BERLINER/ DOUGHNUTS with GARBAGE RACK Completely made of stainless steel Semi-automatic turning device with miter cabinet and 10 tilting trays on rollers lateral drain for the grease Connection 16 Ah Power/voltage 10,4 Kw 400 v/ 50 Hz I9Dzh2T Dimensions 1243x1075x820 total length 2315 cm with side drain plate weight 220 kg Hourly output 600 doughnuts per hour Grease capacity 67 liters for further questions please call thank you

Condition: used, Year of construction: 1999, grinding diameter 360 mm grinding length 650 mm Dpfk8Z centre height 180 mm Control SIEMENS 840 D total power requirement 15 kW weight of the machine ca. 9500 kg dimensions of the machine ca. m