Machining center

SCM Accord 25 fx

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, Functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,650 mm, feed length Y-axis: 1,350 mm, feed length Z-axis: 250 mm, nominal power (apparent): 36 kVA, controller manufacturer: esa, controller model: digit, workpiece length (max.): 3,650 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 250 mm, Equipment: documentation/manual, accord 25 fxm Multifunction worktable X-Y = 3650x1320 Z250 TECPAD - Remote machine control BASIC HS 12 Machining Head Interpolating vector rotating axis Syncron - Electronic copying device of the workpiece surface Air blower for tool Measuring device for tool length 6 Perimetrical reference stops H110 Dpp7Qh Two 250 (300) m3/h - 50 (60) Hz vacuum pumps PRO-SPACE Safety system Rapid 16 - Rear Tool store Air-conditioner for electrical cabinet Enclosed cable-holder chain Supplementary protections for abrasive materials MAESTRO ACTIVE Human-Machine interface software Windows 10 embedded 64 bit operating system

Condition: used, machine/vehicle number: 006117, X axis working area: 3600 mm Y axis working area: 2120 mm Working Table: Flat table Main Electrospindle power: 12 KW Kci0Yz Number of controlled axes: 5 axes Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 006459, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Bcy9Ief0Np3 Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 16

Year of construction: 1991, Condition: excellent (used), Combi machine 40cm wide Dlypbf

Condition: as good as new (ex-display), Year of construction: 2024, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Bavzgvdh8T Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Technical data: Track width: 400 mm Max cutting height: 160 mm Max saw blade diameter: 400 mm Smooth feed regulation Ccfbt3Pu3S Automatic lubrication system Antireflection protection Culaga Extraction port: 185x400 mm Safety switch Power supply: 380 V Main engine power: 30 kW Overall dimensions: Length: 2360 mm Width: 1740 mm Height: 1550 mm

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: B8Jhj3Wrfi 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Year of construction: 2008, Condition: good (used), 3650 x 1560mm Matrix Table 4455mm x axis stroke [ for routing ] 1930mm y axis stroke [ for routing ] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis spped 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additoinal rear stops Automatic centralised lubrication " PC Office " Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Cxq8Hi7 Condition - Good

Condition: used, Ferwood Code: RU0001069 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Ckk3C0Zpza

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Goinokeqdp Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2005, net weight: 3,600 kg, CNC Machining Center SCM Record 125 N Year of construction 2005 CE Serial number - AA1 - 014831 Control: Xilog Plus 4-axle X/Y stroke 3400x1720mm Work table dimensions 3100 mm x 1200 mm 12 Position on tool changer Recording HSK F63 12x vertical drilling 2x horizontal drilling Spindle 7.5 kW 900 - 18000 rpm Bsfn8W0Xdxw Includes: Fence & Safety mats & tools Vacuum pump Brand Becker Type VTLF 250 Capacity 248/300 m³/h Year of construction 2006 Transport dimensions 2200x4200xH2400mmWeight 3600kg

Condition: good (used), Code: 0447 Brand: SCM Model: 2250 2-Works Combined machine Surface/Thickness planer for wood, joinery, furniture, wooden window frames , composites, plastics and various materials Technical data Working width mm 500 Length of cast iron tables mm 2200 Shaft with n°4 tersa cutters Fence tilting up to 45 degrees Motor Hp 5,5 Thickness planer: Table dimensions mm 500 x 930 Automatic table lifting Working height min/max mm 3/235 Feed speed 7,5/15 mt/min Thicknessing work height display Suction mouth diameter mm 150 Overall dimensions mm 2200 x 1000 x 1000 h Dqobzx Weight kg 1200

Condition: used, Year of construction: 2006, Table dimensions mm throat mm motor power kw sanding belt measurements mm Working width mm Motor output kW Length of sanding paper mm Dqmmml Dust suction hood mm incl. 2nd sanding padused, top equipmentmake SCM Samcotype EG 2500year of manufacture 2006machine . AM/28506motor 3.0 / 2.2 kWsanding length approx. 2500 mmsanding width approx. 1000 mmbelt length approx. 6800 mmtable size approx. 2500 mm x 1000 mmcranking right approx. 700 mmcranking left approx. 700 mmelectric adjustmentupper belt coverupper sanding supportbelt speeds 1400 /2800 rpm = 23 m/sec /46 m/secright-left runsuction connection D 160 mmspace requirement approx. 3900 mm x 1700 mm x 1500 mmtotal connected load approx. 4.55 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty

Condition: excellent (used), Year of construction: 2000, I sell the combined surface planing - thicknessing machine SCM 2250. Max. working width 510mm Spindle 4-knives 510x120mm Total weight 890kg. Surface planer: Max. construction cutting take-out 6mm Table dimensions 2200x510mm Fence tilting 0–45°. Bpzwyyrlj Thicknesser: Max. construction cutting take-out 8mm 1+1 top pressure rollers with anti kickback device. 2 bottom rollers in table for better feeding of wet or heavy parts Working thickness adjustment manual . Dust extraction hose diameter 120mm. Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: used, Year of construction: 2019, machine/vehicle number: MR002722, Young used edge banding machine: SCM me25. Machine is in good condition and ready to use. Price is ex Staphorst, delivery on location possible at extra cost. Technical specifications: - Minimum thickness edge banding : 0.4 mm - Maximum thickness edge banding : 3 mm - Maximum thickness strips : 5 mm - Minimum panel thickness : 12 mm - Maximum panel thickness : 50 mm - Minimum panel length : 190 mm - Minimum panel width : 65 mm - Interchangeable glue tray : No - Throughput : 7 /min - Glue tank volume : 0,8 kg - Router unit available : No - Cutting unit : HM saw blade - Cut-off unit diameter saw blade : 90 mm - Cutting unit speed : 12000 /min - Radius and straight cutter unit : Yes - Milling unit diameter : 75 mm - Milling unit speed : 12000 /min - Radius scraper unit : Yes Brmg9Abam8W - Glue scraping unit : Yes - Anti-adhesion spray unit : No - Brushing unit : No - Cleaning spray unit : No - Serial number : KK00006648

Condition: used, Year of construction: 1987, used combination planer Model "SCM 2250 year of construction 1987 total length of the planing tables 2200 mm planing width 500 mm Cho9C3Mrm planing height 235 mm max. chip removal planer 8 mm 4-knife shaft Feed rate 7.5 - 15 m/min. Motor 5.5 kw / 400 V Weight approx. 920 kg Motor brake renewed

Condition: new, Year of construction: 2024, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4040 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 420 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 7100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Kagtslc grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right above the work table possible

Condition: good (used), Year of construction: 1991, max. planing width 520 mm max. planing height 200 mm 4 cutterblocks slotted table lips electr. height adjustment with trolley with knife setting gauge Hsq8E3V

Year of construction: 2023, Condition: new, On stock is a SCM/Minimax combined CU300c machine with 5-operations. Additional equipment included is: Pw8Fhq - Spiral cutterhead Xylent - scorring unit - professional fences - numerical readout on thicknesing position - side mortiser - 2250mm sliding table length TECH. SPECIFICATION: - 5.0 kW motors - max blade diameter: 315 mm (including scorring unit) - planer length: 1500mm - scorring unit adjustment under the work table

Condition: ready for operation (used), working width 500mm Zg7Fn8My 4-knives shaft classic knives tables length 2250mm electric adjustment of thicknesser table weight 850kg

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: AA1/014092, The machine is currently disassembled and put in storage. RECORD 250-VOLT 400/ 50-60 HZ -axis distance X-Y-Z = 4000x2445x400 mm -work table dimensions = 3680x1920 mm -distance between workpieces = 295 mm -distance of the edge of the chuck from the edge of the table: 19/419 mm MILLING UNIT -Power 2000 electro-spindle -HSK F 63 tool holder -rotational speed 900-18000 rev/min -power 11 kW (15 hp) at 9000 rpm -direction of rotation right and left static inverter for smooth speed change and immediate stopping of rotations -cooling by forced circulation of liquid coolant with heat exchange device -6 tool holders for fixing tools on cylindrical shank (1 ER 40 holder and 5 ER 32 holders) -on equipped holders with rubber gasket: 1 with a diameter of 24/25 mm (ER 40) 2 with diameter 19/20 mm (ER 32) 1 with a diameter of 15/16 mm (ER 32) 1 with a diameter of 12/13 mm (ER 32) 1 with a diameter of 5/6 mm (ER 32) -extraction hood along the entire perimeter RAPID 12 AUTOMATIC TOOL CHANGING DEVICE -12 stations -spacing between workstations 88 mm -maximum tool weight 6 kg -maximum magazine load 36 kg -possibility to place in the magazine: 12 tools with a diameter of 85 mm 6 tools with a diameter of 165 mm maximum tool diameter 230 mm placed on the milling unit WORKING TABLE -multifunctional aluminum table with integrated vacuum circuit, with perpendicular grooves for rubber seals, modulset system and retractable stops threaded holes on steel sleeves for vacuum connection, seating of instruments and/or suction cups -on modulset equipment: 24 1-93 mm h=20 mm 8 1=46 mm h=20 mm 8 connecting pieces Bl9Q9Dmehhy VACUUM INSTALLATION -2 independent working areas -pump capacity of the vacuum pump 90 m3/h motor power 2.2 kW maximum vacuum at the pump outlet 0.9 bar -approximate noise emission 72 dB (A) DRIVE AXLE -brushless motors and Yaskawa drives -precision screw mechanism consisting of a ground, threaded screw with nut -prismatic guides with linear bearings -centralized lubrication system managed by control numerical -axis travel speed in high-speed mode X = 105 m/min -axis travel speed in high-speed mode Y = 80 m/min -axis travel speed in Z high-speed mode = 25 m/min TECHNICAL DATA FOR INSTALLATION -compressed air pressure: 7 bar -compressed air consumption: 50 N1/min -three-phase power supply: 400 volt - 50/60 hertz -weight: 5,600 kg Wector rotary axis -maximum speed of rotation 8000 degrees/min -angular differentiation of 0.005 degrees -positioning accuracy 0.1 degree Cutting unit 200 mm diameter 0-360° CNC Operational unit for machining using saw, such as: Technical data: -possibility to switch on continuous rotation 0-360° along the X-Y plane -speed of rotation 6000 revolutions/min -power of 2,2 kW -clockwise rotation -maximum saw blade diameter 30 mm -maximum diameter of the saw blade 200 mm -ON-OFF pneumatically operated vertical travel of the whole system = 235 mm -extraction shield along the entire perimeter of the system Vacuum pump 250 m3/h (5.5 kW) Technical data: -capacity 250 m3/h. -motor power 5,5 kW -maximum vacuum at the outlet of the pump 0.9 bar approximate noise level 81 dB (A)

Condition: used, SECOND-HAND COMBINED THICKNESSER - SURFACE PLANER SCM L'INVINCIBILE 500 MM. Gni3Fsnm

Condition: good (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D-SL, rotational speed (min.): 12,000 rpm, tool length: 370 mm, power: 22.5 kW (30.59 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine can be viewed in operation at any time. Bridge dimension 1250mm Working table swivels +/- 120 Table diameter 280mm Rotary table speed 200 rpm Workpiece weight max. 320kg Tool holder HSK63 Spindle speed range 12,000 rpm Bvmeustn Spindle drive 7.5 / 22 KW Torque 140 Nm gr. tool length 370mm Tool diameter 75/160 mm Tool weight 8kg Rapid traverse 60 m/min. CNC SIEMENS 840 D-SL Software: Teleservice Software: 5-axis simultaneous 24-fold tool changer NC swivel bridge, clamping length 1050 x 250 mm. 2-axis swivel device CHIRON CASD 280 / 4th and 5th axis, pitch 0.0001° Clamping hydraulics through table center 200 bar Workpiece support control ( Airsensoring ) CHIRON Lasercontrol F295 Automatic central lubrication Automatic work area door Electrical interface PROFIBUS for robots Coolant package Internal coolant supply 38 bar Coolant tank 900 l Paper belt filter device Chip conveyor As the object of purchase is a used item, the sale is made under exclusion of any liability for material defects and/or resulting consequential damage, regardless of the legal grounds.

Mileage: 92,926 km, power: 265 kW (360.30 HP), first registration: 08/2017, overall weight: 26,000 kg, axe configuration: 6x2, maximum load weight: 9,950 kg, empty load weight: 16,050 kg, emission class: euro6, Year of construction: 2017, Condition: excellent (used), Functionality: fully functional, Equipment: ABS, air conditioning, hydraulics, Mercedes Benz Antos 2536 Side loader Inch SLF XL 28 - Manufacturer: Mercedes-Benz - Type: Antos 2536 - First registration: 08/2017 - Kilometers: 92.926km - Unladen weight: 16.050kg - Payload: 9.950kg - Gross vehicle weight: 26,000kg - Power: 265kw/360PS - Lane keeping assistant - Right-hand drive - Automatic air conditioning - Adblue - 6x2 - Inch side loader (right) - Type: SLF XL 28 - Operating hours: 9764h - With integrated dumping - Type: Zöller FLEX 1100 - Tiltable emptying container Cukmexrp9U - Telescopic emptying mechanism - Vertically and horizontally adjustable - Internal and external operation - Euro 6 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: new, Siemens power cable extension 6FX8002-5DA38-1BF0 ( 6FX8 002-5DA38-1BF0 ) Dqo7Kb Länge / length: 15,0m Zustand / Condition DE: sealed EN: sealed