PANEL SAW with REAR LIFTING TABLE

SCHELLING FH 6 (430)

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Pedpfx Afjiwbfuj Njgw Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B Pgjdpfsumvnhsx Af New - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Pjdpfxotk It Ss Af Nogw Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Pjdpet Ah Niofx Af Nogw Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Pgsdpfx Afoiim Tqj Nsw Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 4,250 mm, cutting height (max.): 120 mm, cutting width (max.): 4,100 mm, main saw diameter: 460 mm, power: 21 kW (28.55 HP), Machine type: fh6 430-410 / HT220 / MCS-Evolution / Win 10 Cutting length: 4,250 mm Cutting width: 4,100 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 125 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pcs. (2100 x 700 mm) Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Automatic cutting length adjustment Scissor lift table: - Panel width: 2200 mm - Platform - Hydraulic unit - Max. Load: 6,0 tons - Push-off trolley - Rack and pinion drive - Frequency converter driven - Drive shaft - Push-off device: - Quantity: 2 pc(s) - For panel thicknesses ≥ 6 mm - Probe spindle for automatic package height adjustment - Floating - Cross alignment stop at the roller table - length: 1450 mm, measured from the saw line - solid box-type steel welded construction - alignment stop surface is precision machined - Book aligning device for longitudinal board edges - Quantity: 2 pc(s) - For pusher infeed - Raise- and lowerable aligning dog - Pneumatic operation - Counterholder: - Quantity: 2 pc(s) - For board thicknesses ≥ 6 mm This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! Pedpolni T Ejfx Af Njgw (displayed photos are symbol photos)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Pedjillukjpfx Af Negw Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO

Condition: excellent (used), Year of construction: 2018, working size (mm) 400X300mm Distance from saw blade to worktable (mm) 3~200mm Conveyor belt width (mm) 385mm Saw wheel power (kw) 18.5kw Saw unit sprocket diameter (mm) 711mm Feeding speed (m/min) 0~12m/min Psdpfei Ay Hqsx Af Negw Hydraulic pressure (kg/cm²) 55kg/cm² Dust outlet diameter 102mmX2 Blade size (L x W x H) (mm) 4572 x 27 x 0.9mm Saw Gap (mm) 1.5~1.8mm Overall dimensions (LxWxH) (mm) 3000x2250x2000 Net weight (kg) 2100kg

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Pedpoq Rffisfx Af Nogw Lifting table (mm) 4300 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Pedpeq Rfahsfx Af Nogw Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: new, Year of construction: 2024, Operating massive working pieces? Then this CNC laser machine would be the ideal option. The Wattsan 2030 Flat Bed is a laser cutter designed to work with large materials. There is no need for extra preparation; go right to work! This CNC laser machine has a table size of 2000x3000 mm. It also includes a trash collecting container, which will make the job much more enjoyable. Wattsan 2030 can cut materials such as cloth, plywood, cardboard, rubber, acrylic, plexiglass, and wood. You can give our managers a call for additional details! Wattsan 2030 Flat Bed characteristics Working area: 2000x3000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2400 x 3750 x 800 mm Packing size: 3860 x 2540 x 1020 mm Weight: 1075 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Psdpfjry Uf Aox Af Njgw Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Pjdpfx Afswrz Dbj Negw Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)