Veneer saw

Scheer** FM2-3000

Condition: used, Year of construction: 1970, used, good conditionmake Scheertype FM2 3000year of manufacture approx. 1970machine no. 102748cutting length 3000 mmsaw blade diameter approx. 180 mmrear support tablespace requirement approx. 3500 x 1000 x 1300 mmweight approx. 400 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dq73Uf

Condition: used, Year of construction: 1995, Used machine Year of construction 1995 technical data: Working length: 3000 mm Handwheel tension Power unit 2 kW Availability: short term Nuv73L88H9 Location: Hesse

Condition: used, No. 04416 Veneer saw Scheer FM 2-3000 Used Cutting length 3000 mm Cutting width approx. 600 mm Cutting height 0 - 45 mm Rear support table 400 mm wide Saw blade diameter max. 180 mm 380 V, 1.8 kW Scheer jointing and fine-cutting machines cut veneers, hard paper, foils, chipboard coated on both sides and a wide variety of panel-shaped materials with a square edge, without joints or splinters. Even thin non-ferrous metal sheets such as aluminum, brass and copper as well as plastics (acrylic glass, hard and soft PVC, foams, etc.) are cut amazingly cleanly. The material to be cut is clamped by a pressure beam, which is tensioned by means of a handwheel and cable. The clamping pressure is evenly distributed over the entire clamping length. As a result, even wavy veneer packages are cut without joints. The manually guided saw carriage with flange-mounted three-phase motor runs on an extremely precisely machined guide track and is mounted on 5 ball bearings. The steel guideway is automatically kept clean by spring wipers. Excellent cutting results are achieved by a small, easily replaceable saw blade. Transport dimensions approx. 3300 x 1200 x 1500 mm LWH Weight 250 kg 2Wcmm2Zk To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Materialspannung über Handrad Schnittlänge 3000 mm max. Schnitthöhe 60 mm Dq7Ajj Lagerort: Nattheim

Condition: used, second handMade by ScheerType FM 2P-3000Machine no. 81394Motor 1.1 kWCutting length approx. 3000 mmpneumatic tension 1 cylinderrear support tableRequired space approx. 3600 mm x 1100 mm x 1300 mmWeight approx. 350 kgStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Bgh0Wcy2I0

Condition: used, cutting length: 3.000 mm Saw blade diameter: 180 mm Cxiougjkrz engine: 2.5 hp Veneer saw Scheer FM 2-3000 for sawing or cutting veneer or thin wood.

Condition: used, Cutting length: 3050mm C9Wshtu Workpiece clamping: Hand wheel Suction device: yes

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Crw0Pcfza7

Condition: excellent (used), Veneer saw FM2 3000 mm Fully operational Behv3Z3 With rear table

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Sdl2B Clamping by handwheel integrated suction unit Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, Used machine Condition: Functional Technical data: Working length: 3000 mm Handwheel tension Power unit 2 kW Bheqau2Ryd8 Availability: short term Storage location: Hochheim

Condition: used, Used machine I8Sevgxr3 Cutting length 3000 mm with handwheel clamping Availability: short term Storage location: Röllbach

Condition: used, Used machine Veneer jointing machine Machine number 1262050 Motor power 2.5 HP Engine speed 2810 rpm Cutting length 3100 mm Saw blade diameter 180 mm Rear support board missing Movable Transport dimensions approx. 3700 × 700 1450 mm Crw2No7W3D Weight approx. 200 kg Availability: approx. end of July Location: Cologne

Condition: used, Year of construction: 1985, Schnittlänge: 3100 mm Schnitthöhe: verstellbare Höhe von 0-45 mm Sägeaggregat: leistungsstarker Drehstrommotor 220/380 Volt, 1,8 kW Leistung Spannbalken oben über Handrad zu spannen Dq7Aiv Lagerort: Nattheim

Condition: not inspected (used), Cutting length 2500mm 7Grqtqgdec

Condition: used, Year of construction: 1984, Second hand machine Year of manufacture: 1984 universal dowel drilling machine with one swiveling drilling unit with fully automatic control with 2 safety air clamps Crw0Hawbec drilling gear motor 2,2 kW with 21 spindles spindle pitch 32 mm with mounted oil damping height adjustment 80 mm drilling depth 80 mm Weight 420 kg Availability: short term Location: Röllbach

Condition: new, Catalog number: H0443 – new machine, in stock – CE certificate – professional – max. clamping height 1550mm TECHNICAL DATA total height 2040mm total width 3000mm max. clamping height 1550mm min. distance between clamping units 240mm distance of the hole from the clamping unit 50mm pressure 6x2000kg net weight 325kg total weight 370kg dimensions length/width/height 3030x450x660mm PRODUCT FEATURES Solid steel construction Easy adjustment of the clamping unit Easy and fast movement of the clamping unit Possibility of continuous material feed Steering cylinder guided by a side spring Massive nuts ensure constant pressure Additionally stiffened construction prevents twisting frames Two high-performance, fully adjustable hydraulic cylinders Hydraulic valves maintain constant pressure Bin7Kcrwzk Hydraulic pressure indicator as standard Net price: PLN 12,600 Net price: EUR 2,970 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), Year of construction: 1984, used, top condition, hardly used Make Scheer Dqmmnt Type FM5 - 3100 Year of manufacture 1984 Mach. No. 41134 Motor 1.8 kW Saw feed / handwheel Cutting length 3100 mm Saw blade diameter: 180 mm Pneumatic tension Rear support table Dqu3Cx Parallel stop Chassis Space requirement approx. 4200 mm x 1200 mm x 1200 mm Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: excellent (used), Functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Bcu70Qrgxc Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: used, Year of construction: 1981, Used machine Year of construction: 1981 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety air clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm Crw2A8Mksz with attached oil damping Height adjustment 80 mm Drilling depth 80 mm with chassis Weight 420 kg Availability: short term Location: Solingen

Condition: used, Used machine double-sided in-line drilling machine 2 drilling motors 1.8 kW with oil brake cylinder Stroke max. 130 mm with pneumatic reversing valve 21 spindles, spindle pitch 32 mm Drilling distance max. 640 mm (by shifting the workpiece max. workpiece max. 2656 mm) Bkhqffww Gantry passage 850 mm Air consumption at 5 atü approx. 11 l per cycle Suction nozzle 160 mm Machine dimensions approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 1982, Used machine Condition: good I8Rszagaa Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Weight approx. kg: 400 Location: Hochheim Availability: short term

Condition: used, Year of construction: 2006, Used machine Year of construction: 2006 Equipment and technical data: For manual production or as a stand-by machine in CNC operation, Universal machine for drilling carcase parts and for processing corner joints, frame joints, holes on the surface side, holes for cabinet fittings, etc. - Drilling unit kW 1.84 Volt 230 / 300 Hz 50 Speed rpm 2840 - Number of spindles: 21 - Spindle pitch mm 32 / 32 - Max. spindle distance mm 640 - Spindle direction of rotation 11 x right / 10 x left - Drilling stroke mm max. 80 - Drilling depth with 80 mm drill bit mm max. 45 with 105 mm drill bit mm max. 70 - Height adjustment mm 4 - 43 - Workpiece clamping 2 safety clamps - Clamping height mm max. 90 - Gantry passage mm max. 740 - Pneumatic control with foot valve Ccctvrs foot valve, electric intermittent operation - Table size mm 880 x 400 Shipping dimensions: 150x110x150 cm Weight: approx. 340 kg Availability: short term Location: Flörsheim

Condition: used, Used machine I8Swrnjdy Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm Dpqr02 stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW