English
German English Dutch Dutch

Rotair MDVN 72K
Rotair MDVN 72K

Year of construction
2020
Type of offer
New machine
Location
NUMANSDORP

MACHINE DATA

Machine type:
Rotair MDVN 72K
Manufacturer:
Rotair
Model:
MDVN 72K
Year of construction:
2020
Condition:
new

PRICE AND LOCATION

Location:
NUMANSDORP

LISTING DETAILS

Listing ID:
A511-9620
Reference number:
998432
Update:
07.04.2021

DESCRIPTION

The MDVN 72K is a compact machine that can be used for various applications, such as road works and floor chains Thanks to the fact that you can drink your alcohol, the compressor is stable in the eighth position.For example, the MDVN 72K is about 750 kg, which is delivered with the same construction and has its own special design. For example, the MDVN 72K is for a single Kubota engine. The machine has a distinctive price / quality ratio. The MDVN 72K is available as a mobile unit and the skid-version is equipped with triple-damped stepping.

Some examples of the MDVN series:

Mobile perslucht van 7,1 m3/min in a compact machine.
For the benefit of a controllable and single Kubota engine.
Built on the ALKO surface.
Duurzaam and low-luid.
Bosafz7oee

 

The advertisement was translated automatically. Translation errors are possible.

SELLER

Diaber Benelux B.V.

Contact person: Herr Kees Braal

Voltastraat, 11

3281 NG Numansdorp, Netherlands

Telephone:
Contact persons:
Mr Kees Braal
Machine ID:
998432 - Werktuigen

Registered since: 2020

68 listings online

Send inquiry

us
Germany
Austria
Switzerland
United States
United Kingdom
France
Belgium
Spain
Mexico
Italy
Netherlands
Poland
Russian Federation
Belarus
Ukraine
Estland (Reval)
Turkey
New Zealand
Ireland
Czech Republic
Denmark
Finland
Sweden
Norway
Malta
Luxembourg
Greece
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Macedonia
Bosnia and Herzegovina
Israel
Egypt
India
Indonesia
South Korea
Japan
Thailand
Malaysia
Vietnam
China
Taiwan
Iran
Bangladesh
Afghanistan
Attention: Your request will be forwarded to all dealers in this category. This will allow you to receive many offers!
The inquiry could not be sent. Please try again later.

TELEPHONE & FAX

Telephone: +31 186 223 000
Fax: +31180418201
Telephone:
Contact persons:
Mr Kees Braal
Machine ID:
998432 - Werktuigen
These listings may also fit your interest.
Rotair MDVN Mobiele dieselcompressor Rotair MDVN Mobiele dieselcompressor Rotair MDVN Mobiele dieselcompressor Rotair MDVN Mobiele dieselcompressor Rotair MDVN Mobiele dieselcompressor
more images
5
Call
Numansdorp, Netherlands Netherlands
(dealership location)
2020
new
NEW SEIRE Rotary MDVN Mobile diesel compressors. Onndf Available in a range of 2 to 8 m. Executed with KUBOTA MOTOR Can be supplied with built-in aftercooler, reheater, lubricating oil nebulizer, etc. , Click here for more information  Click here for the brochure , For more information, call.
Rotair MDVN 22K
more images
1
Call
Numansdorp, Netherlands Netherlands
(dealership location)
2020
new
The MDVN 22K from Rotair is a compact machine that is used for many light hooks of concrete and other applications. Thanks to the use of low alcohol, the compressor is now a stable eighth of the car. The MDVN 22K is for a Kubota engine. The machine has an excellent price/quality ratio. The MDVN 22K is available as a mobile version and the skid-mounted version with triple-damped steering. Some examples of the MDVN series: Mobile translucence of 2.0 m3/min in a compact machine. Advantages of a dr...
Rotair MDVN 37K Rotair MDVN 37K
more images
2
Call
Numansdorp, Netherlands Netherlands
(dealership location)
2020
new
NEW SERIES Rotair MDVN Mobile diesel compressors. In a range van 2 tot 8 m leverbaar Uitgevoerd met KUBOTA MOTOR Kan geleverd worden met ingebouwde nakoeler, reheater, smeerolienevelaar enzo. Deze compressor is uitermate geschikt te gebruiken voor Gevelrestauratie, stralen, slopen en hakken. Klik hier voor brochure: Link Klik hier voor meer informatie: Link Bel voor meer informatie naar . #Rotair #diaber #gevelreiniging #nieuw #model #Rotair37K #DiaberBenelux #IBIX25 #IBIX40 #IBIX60 #Spytze B...
Rotair MDVN 53K Rotair MDVN 53K
more images
2
Call
Numansdorp, Netherlands Netherlands
(dealership location)
2020
new
NIEUWE SEIRE Rotair MDVN Mobiele diesel compressors. 5,3 cuub compressor, inclusief nakoeler. Powered by KUBOTA MOTOR can be supplied with inbuilt oil, water, sea foil and other equipment. Possible in SKID and with trailer click here for more information click here for the brochure Bel for more information below. Onnh2
Rotair MDVN 46K
more images
1
Call
Numansdorp, Netherlands Netherlands
(dealership location)
2020
new
The MDVN 53K is a compact machine that can be used for many different types of road transport, hitching with goods hitchhamers and so on. Thanks to this, the compressor zeer is stable eight of the car, which is normally supplied with the same construction and a separate handle, the MDVN 53K is for the use of one single Kubota engine and handle, and has an excellent price/quality ratio. The MDVN 53K is available as a mobile unit and the skid-version is equipped with triple-damped stepping. ...
Rotair MDVN 82KH
more images
1
Call
Numansdorp, Netherlands Netherlands
(dealership location)
2020
new
The MDVN 82KH is a compact machine that can be used for many different applications, such as road works and floor chains Thanks to the fact that you can use your own alcohol, the compressor is a stable eighth of the car The MDVN 82KH is then 750 kG, which is delivered and equipped with its own handlebar. The MDVN 82KH is equipped with a Kohler engine. The machine has an excellent price / quality ratio. The MDVN 82KH is designed for use as a mobile unit and the skid-mount...
IBIX 25 h2o HD met Rotair MDVN 36AP dieselcompressor IBIX 25 h2o HD met Rotair MDVN 36AP dieselcompressor
more images
2
Call
Numansdorp, Netherlands Netherlands
(dealership location)
used
Rotair MDVN 36AP Engine: Perkins Measured 3600 l/min Advantages of ingredients Weight 680 kg. Margin of birth: slecht 1582 uur. Bouwjaar 2006 Ibix 25 h2o hd strawberry stalks full of nagecia Fwj8ue8x Recycles all sorts harde straalmiddel factory pressure adjustable from 0.1 to 8 bar. Even at one level of working pressure a mooie equal road heavy duty uitvoering (zie afbeelding) Completely delivered with light weight blasting pistol and nozzle after blowing. Heeft...
Rotair OLS 160 Sloophamer Cw05 2.5 tm 3.5 tons machine Rotair OLS 160 Sloophamer Cw05 2.5 tm 3.5 tons machine Rotair OLS 160 Sloophamer Cw05 2.5 tm 3.5 tons machine Rotair OLS 160 Sloophamer Cw05 2.5 tm 3.5 tons machine Rotair OLS 160 Sloophamer Cw05 2.5 tm 3.5 tons machine
more images
5
Call
Nieuwerkerk aan den IJssel, Netherlands Netherlands
(dealership location)
2013
excellent (used)
Layout: Breekmachine Year of manufacture: 2013 Attachment suited for: Construction machines Quick coupler system: Yes Technical condition: very good Visual appearance: very good Ptdtt
Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7 Rotair GOMMAIR 10-7
more images
11
Call
Waregem Belgium
2016
excellent (used)
Field of application: Construction Empty weight: 265 kg Make of engine: Kubota Z602 Capacity: 1,1 m³/m Technical condition: very good Mrkgv Visual appearance: very good Please contact Sales Department for more information EPA marked Compressor type: Screw compressors Transport dimensions (LxWxH): 1.02x0.68x0.98 Working pressure: 7 bar
Rotair VRK 1,6 m³ benzinecompressor
more images
1
Call
Numansdorp, Netherlands Netherlands
(dealership location)
new
De VRK Motorcompressor is een unieke compacte compressor. De compressor is zeer compact gebouwd en voorzien van Honda petrol engine. Some features of the Rotair VRK motorcompressor: Very compact dimensions 1050 x 780 x 1000 mm. Voorzien van betrouwbare Honda petrol engine. Uitgevoerd op trillinggedempte banden en steun. Eenvoudig met 1 persoon te verplaatsen Minimale werkdruk: 6, 11, 13 Capaciteit in l/min: 1600, 1100, 950 Aantal cilinders: 2 Minimale motorvermogen: 14,7 Kw Mazimale motorvermog...
Rotair VRK 200 - N Rotair VRK 200 - N
more images
2
Call
Waregem Belgium
2018
used
General information Field of application: Construction Drivetrain Make of engine: HONDA GX 670 Weights Empty weight: 230 kg Functional Capacity: 1,9 m³/m Condition General condition: average Technical condition: average Visual appearance: average K7soluf9 Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 1.2x0.78x1 Working pressure: 8 bar Additional information Please contact Sales Department for more information
Rotair Gomair 1 m³ compact
more images
1
Call
Numansdorp, Netherlands Netherlands
(dealership location)
new
De Gomair is een zeer compacte Dieselcompressor ontwikkeld voor het mobiel uitvoeren van reparatie aan banden en voor de glasvezelmarkt, maar ook voor zeer veel andere toepassingen. De werkdruk van deze compressor is op te voeren tot 13 bar. Some voordelen van de Gomair. - 1 m3/minuut perslucht bij 13 bar in minder dan 1 kuub volume. - Ideaal voor mobiele reparatie van banden en glasvezelkabels. - Right connection between Kubota diesel engine and Rotair schroefcompressor. - Gemakkelijk in te b...
Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704 Perkins 1104-44TG1 - 72 kVA Generator - DPX-15704
more images
13
General information Field of application: Construction Serial number: U685083E Drivetrain Type of fuel: Diesel Bjgxh2djbf Make of engine: Perkins 1104A-44TG1 Weights Empty weight: 1.145 kg Functional Generator capacity: 72 kVA Dimensions of cargo space: 5 x 1 x 1 cm Other information EPA Marked: yes EPA Marked: yes Fuel consumption: 11.2 Liter / Hour at 75% Load Generator: Stamford UCI224F1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volu...
Krones VP-VI 072 KK12-094
more images
1
Call
Neutraubling Germany
1995
ready for operation (used)
ecomac Gebrauchtmaschinen GmbH offer an used KRONES Filler for beer. The capacity is 28.000 bottles/h refer to a 0,33l glass bottle with crown cork. 72 pieces filling valves, 12 crowner stations, pitch 94mm. The filler is immediately available and possible for visit. Ozlop Further details on request or in specification
Manitou CBA2500L 2450LDR Manitou CBA2500L 2450LDR Manitou CBA2500L 2450LDR Manitou CBA2500L 2450LDR Manitou CBA2500L 2450LDR
more images
5
Call
Crailsheim, Germany Germany
(dealership location)
2013
used
Hydraulic scoops Load Centre: 618 Bewvjtvmqy Overall Length: 1514mm Overall width: 2450mm Closed height: 1205mm Overall weight: 772kg YOM: 2013 Condition: New Description: Schaufelvolumen 2508 L
Schefer 11010 ET3 Schefer 11010 ET3 Schefer 11010 ET3 Schefer 11010 ET3
more images
4
Call
Wermelskirchen, Germany Germany
(dealership location)
2010
used
High Lifter / Scissors Lifts Capacity: 1000kg Lift height: 820mm Closed height: 590mm Bzqyl2pvsi Overall weight: 172kg Mast type: Standard Fork length: 1170mm YOM: 2010 Condition: average Bereifung vorne Typ: Cushion Bereifung hinten Typ: Cushion Description: Das Gerät wird teillackiert, werkstatt- und UVV-geprüft. Hub elektrisch
Kalmar ECG80-9
more images
1
Call
Hamburg, Germany Germany
(dealership location)
2017
used
Heavy Forklifts Capacity: 8000kg Load Centre: 900 Lift height: 3570mm Overall Length: 4060mm Overall width: 2000mm Closed height: 2930mm Overall weight: 11972kg Mast type: Standard Fork length: 2300mm YOM: 2017 Condition: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Grösse: 8.25-15 Bereifung hinten Typ: Super Elastic Bereifung hinten Grösse: 315/70-15 Batterie Volt: 80V Batterie Ah: 1550Ah Mwt3zw Batterie Baujahr: 2017 Description: Wir haben neben diesem Kalmar Modell noch ca. 20...
Still FM-X10 - AKKU NEU Still FM-X10 - AKKU NEU Still FM-X10 - AKKU NEU Still FM-X10 - AKKU NEU Still FM-X10 - AKKU NEU Still FM-X10 - AKKU NEU
more images
6
Call
Bremen, Germany Germany
(dealership location)
2011
used
Reach Truck Capacity: 1000kg Load Centre: 600 Lift height: 5900mm Free lift: 1940mm Overall Length: 1229mm Overall width: 1250mm Closed height: 2500mm Overall weight: 2872kg Mast type: Triplex Fork length: 1150mm YOM: 2011 Condition: very good Bereifung vorne Typ: Vulkollan Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Vulkollan Bereifung hinten Zustand: 80 - 100% Batterie Volt: 48V Batterie Ah: 620Ah Batterie Baujahr: 2021 Batterie Zustand: 80 - 100% Description: Zustand: überholt, g...
Horizon BQ-260 Horizon BQ-260
more images
2
Call
Volkach, Germany Germany
(dealership location)
2000
used
offer consists of: Horizon BQ-260, perfect binder - clamps: 1 - spine gluing: hot melt - glue serve: glue drum / glue tank - sight gluing: hot melt - milling depth: adjustable - set-up times: short - handling: easy - extraction: splinter bag - functions: milling, binding, pressing, delivery - size: max. 320x320x40mm; min. 75x75x0,5mm - cover size: max. 650x320mm; min. 260x120mm - production speed: with milling: 410 books/h without milling: 600 books/h - power: 400V/ 50Hz - dimens...
Mitsubishi FG15N Mitsubishi FG15N Mitsubishi FG15N Mitsubishi FG15N Mitsubishi FG15N Mitsubishi FG15N
more images
6
Call
Oyten, Germany Germany
(dealership location)
2007
used
LPG Forklifts Capacity: 1500kg Pwcpze Lift height: 4090mm Overall weight: 2672kg Mast type: Standard YOM: 2007 Condition: good Side Shift, 3rd valve,
Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S Hyster S120XL 2S
more images
10
Call
Crailsheim, Germany Germany
(dealership location)
1999
used
Compact Forklifts Capacity: 5500kg Load Centre: 600 Lift height: 4060mm Free lift: 1135mm Overall Length: 2600mm Overall width: 1450mm Closed height: 2130mm Overall weight: 8572kg Mast type: Triplex YOM: 1999 Condition: very good Engine: GM Vortec V6 Bereifung vorne Typ: Cushion Bereifung vorne Grösse: 22x12x16 Bereifung hinten Typ: Cushion K7sn3l39 Bereifung hinten Grösse: 18x8x12.125 3rd valve, Overhead guard,
Durst DIXIS2G Durst DIXIS2G Durst DIXIS2G Durst DIXIS2G Durst DIXIS2G
more images
5
Call
Horst Germany
2017
good condition (used)
Type: DIXI S 2G Serial number: 517511 Voltage: 400V Power consumption: 3.4 A. Frequency: 50 Hz Power: 1.5 kW Speed: 1435 rpm Weight: 272kg Volume flow: 8000 m3 / h D8hqknp Pressure increase: 480 Pa Min.temperature medium: -30 ° C max.temperature medium: + 80 ° C Pumped medium: air
Call
Hamburg, Germany Germany
(dealership location)
used
Reach Truck Capacity: 1600kg Load Centre: 600 Lift height: 6580mm Gyadw8 Free lift: 1830mm Overall Length: 1900mm Overall width: 1270mm Closed height: 2700mm Overall weight: 3672kg Mast type: Triplex Fork length: 810mm YOM: 20145 Condition: very good Batterie Volt: 48V Batterie Ah: 775Ah Batterie Baujahr: 2014 Description: Wir haben neben diesem Jungheinrich Modell noch ca. 200 Schwerlaststapler, Kompaktstapler, Gabelstapler & Seitenstapler in unserem Lager Hamburg und Danzig. Besuchen Sie ...
KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler KALLESOE LV 7821 + LA1+ KS1 + KL40 +Vacuumstabler
more images
15
TECHNICAL SPECIFICATION OF AUTOMATIC PRESSES FOR GLUING GLADES KALLESOE LV 7821 The machine consists of the following elements: Ozgkn - Kallesoe type LA1 feeder - to which we put the material together with the pallet, and this tray automatically downloads, distributes them into individual elements and passes them on to the sorter - Kallesoe type KS1 sorter - the sorter automatically retrieves items from the LS1 feeder, sorts and passes on to the KL40 glue spreader - glue spreader with a Kal...
IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37 IMT Typ DRESS 72-37
more images
11
Call
Pfaffenhofen Germany
2014
good condition (used)
Dressing spindle type DRESS 72-37 for dressing grinding wheels to be profiled, incl. motor connection cable and spindle carrier. According to the manufacturer highest precision and smooth running during the dressing process. HF spindle Dress 72 - 37 spindle housing 72 mm Speed up to 16.000 min-1 (clockwise/anticlockwise rotation) Power S1 100% 0,5 kW from 11.500 min-1 Power S6 40% 0.8 kW from 11,500 min-1 Motor type Asynchronous, 3 phases Number of poles 4 poles Voltage 230 Volt Current S1 100% ...
SCHMIDT SCHMIDT SCHMIDT
more images
3
Call
Berlin, Germany Germany
(dealership location)
2001
ready for operation (used)
Pressing force: 72kN, stroke: 12-100mm, machine needs overhauling. Pv2zua
Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70 Genie ZX-135/70
more images
10
Call
Crailsheim, Germany Germany
(dealership location)
2018
used
Articulated Jib Platforms Capacity: 272kg Working height: 43150mm Overall Length: 12950mm Overall width: 2550mm Closed height: 3150mm Overall weight: 21735kg YOM: 2018 Condition: very good Bhwybmvjn3 Bereifung vorne Typ: Pneumatic tires Bereifung vorne Grösse: 445/50D710 Bereifung hinten Typ: Pneumatic tires Bereifung hinten Grösse: 445/50D710 - 220 V Generator
Hitema ENR 075 Hitema ENR 075 Hitema ENR 075
more images
3
Call
Güglingen Germany
2020
as good as new (ex-display)
fully equipped warehouse machines for sale: cooling capacity 72KW at 7/12°C, internal P3 pump, internal 410l tank, winter package up to -25°C ambient temperature for outdoor installation includes speed controlled fans and control cabinet heating, condenser protection grid, X-Web300 and RS485 Modbus, forklift pockets, automatic bypass for pump protection, large Dixell display with protective cover, flange connections Bnz7bpqhiu
MAURER for 3 trollies MAURER for 3 trollies
more images
2
Call
Cerovac Serbia
excellent (used)
Smoke house MAURER , for 3 trollies Dimensions: 150x360x270cm Mmkqk8j2 Power: 72kW
IBIX 25 H2o straalset + dieselcompressor IBIX 25 H2o straalset + dieselcompressor IBIX 25 H2o straalset + dieselcompressor
more images
3
Complete straalset in zeer goede staat. Ibix 25h2o hd zo goed as nieuw recycles all kinds of hard and decent straalmiddles factory pressure adjustable from 0.1 to 8 bar. Even at one level of working pressure a mooie equal road Completely delivered with light weight blasting pistol and nozzle after blowing. Heeft nog 4 jaar warranty. Development for professional intensive use. Natural and droog stralen will be inserted before: meubels ontlakken / waslagen verwijderen (...
Chevalier FSG-618 Chevalier FSG-618 Chevalier FSG-618 Chevalier FSG-618 Chevalier FSG-618 Chevalier FSG-618
more images
6
Call
Pataias (Alcobaça) Portugal
excellent (used)
Characteristics: • Strokes (X x Y): 482 x 180 mm • Base (X x Y): 460 x 146 mm Rrtqr23 • Max grinding wheel diameter: 200mm • Distance from the base of the table to the center of the wheel 460mm • 1Kw engine at 3,450rpm • Weight: 672Kg • With manual lubrication • Dimensions (L x W x h): 1346 x 890 x 1700mm note: • Machine completely revised and painted, as new.
 HAP 170 30/25  HAP 170 30/25
more images
2
Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacit...
 HAP 100 20/17  HAP 100 20/17
more images
2
Delivery ex works Turkey Bending length (A): 2050 mm Press force: 100 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Buww80vcz7 Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 1700 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil t...
 HAP 135 25/21  HAP 135 25/21
more images
2
Delivery ex works Turkey Bending length (A): 2550 mm Press force: 135 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2100 mm Forward speed: 120 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacit...
FEEDBACK
Successful: Task carried out
Error: Task could not be carried out