4x automatic indexing plate

RISMATIC 157 G -16

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, Fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Vss3Qy Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: used, In this offer you purchase a used B/W production system "Xerox Nuvera 157 EA" Object of sale: 1 x Xerox Nuvera 157 EA with the following equipment: incl. 4-cassette paper deck incl. stacker Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 3,195,692 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Dpdypz Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Axe configuration: 3 axles, First registration: 05/1998, Suspension: air, Color: other, Year of construction: 1998, Condition: used, = Additional options and accessories = - air suspension - Drum brakes - Wooden floor = More information = Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 50 kg Rear axle 2: Max. axle load: 50 kg Rear axle 3: Max. axle load: 50 kg Uwiodikvmd Dimensions (LxBxH): 1360 x 250 x 120 cm General condition: very good Serial number: SMUFAC27YWL023309

Condition: good (used), grinding diameter max. 300 - 350 mm regulating wheel width 20 - 110 mm max. width of grinding wheel 110 mm turning speeds 1400 U/min total power requirement kW weight of the machine ca. 1,2 t Gxc0B7U dimensions of the machine ca. 1,6 x 1,2 x 1,8 m

Condition: used, Year of construction: 1999, grinding length 600 mm grinding width 400 mm workpiece height mm Gxc0Bk3 total power requirement 8 kW weight of the machine ca. 2,2 t dimensions of the machine ca. m

Condition: repair required (used), Functionality: unexamined, Year of construction: 2018, Operating hours: 4,310 h, Power: 180.2 kW (245.00 HP), Motor manufacturer: Deutz, Fuel type: diesel, Equipment: Lighting, More information - Defective Lucas AUTOSPIRE 240 / Carte Grise Française self-propelled feed mixer wagon French *BRULEE*BURNED*BURNED*ACCIDENTE*DAMAGED*ACCIDENT* Type :Mélangeuse Automotrice Marque :LUCAS / G Modèle :AUTOSPIRE 240 Année :2018 Hours :4310Hrs Power :180Kws Capacité :24M3 Vin Number :BB18B0050 Numéro d'Annonce :240210 Mélangeuse Automotrice LUCAS / G AUTOSPIRE 240 du 31/08/2018 avec 4310 Heures Upkp0X7R39 -Capacité 24 Mètres cubes Moteur Deutz TCD 6.1L6 180Kws -Pneumatiques 495/45R22.5 Incendie sur faisceau moteur *BRULEE*BURNED*ACCIDENTE*DAMAGED*ACCIDENT* 1ere-MAIN*FIRST-HAND*FIRST-HAND Possibilité de livraison ,en supplément du prix de vente Formalities de dédouanement hors Europe prise en charge Carte grise original Française disponible Prix Hors Taxes TVA Récupérable Plus de 200 Véhicules / Machines en stock visible sur notre parc ou notre site internet Fcenegoce

Condition: used, Year of construction: 2001, Overview This mixer-grinder, type: K&G Wetter MWW 130 was built in 2001 in Germany. This machine is in good condition. Technical Details Throat diameter: 130 mm Motor power 19 Kw.50A.400V. With hopper Capacity approx. 3500 kg/h (depends on the hole plate) Speed working screw:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Weight 2000 kg Scope of delivery Mixer-Grinder | K&G | MWW 130| 2001 Gxcy8Pi

Year of construction: 2024, Condition: new, Functionality: fully functional, New Mobile 300 Ton/Hr Soil Stabilisation/Hydraulically bound materials mixing plant capable of producing hydraulically bound materials in situ. Wheeled chassis suitable for road transport via 5th wheel. Complete with Twin Shaft 55KW Electric drive Pug Mill, 2 Powder Silos with fully intergraded measuring system for accurate and auditable dosing, complete with two integral dosing hoppers with Live Head screen to reject over size, On board 200KVA Gen Set, On Board Compressor, Brakes, Lights (UK spec) Cmr9J3Hcso

Condition: good (used), Functionality: fully functional, The troughed conveyor system is a Wheelabrator-Berger R3d, with hydraulic feeding, control stand, dust extraction system and vibrating conveyor. The caterpillar conveyor was replaced 2 years ago. D7Vzxy0

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm Cdea7B0L opening width top clamping bar: 70 mm adjustment bending cheek: 10 mm space needed: 2300 x 600 x 1050 mm

Year of construction: 1980, Condition: used, Volume: 25250 Liter Ckjzhuupnd Operating pressure: 3 bar Systemic volume: 25250 Liter Tank trailer - semi-trailer with bright beer tank for beer transport; the construction year of the trailer is 2012.

Condition: excellent (used), Catalog number 7426 TECHNICAL DATA - max diameter of processed log 320mm Dpmcrr - min length of processed log 2000mm - number of spindles 2pcs - circular saw blade diameter 500mm - smooth regulation of the feed speed on the inverter - power of the drive engine of the lower spindle 75kW - power of the drive engine of upper spindle 75kW - power of feed motor 2×2,2kW - power of motor of upper, input, pressing shafts 1.1kW - motor power of side shafts, bringing out, pulling 2×2.2kW top: - 2 pulling, gear shafts - saw shaft - from the side 2 output shafts, pulling, toothed - 2 outfeed shafts, sliding, smooth from below: - track - shaft with saws - caterpillar - total dimensions L/W/H 5900x2500x1900mm + control 1050x1300x2000mm - weight 3800kg Net price: 159900 PLN Net price: 36340 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations) Possibility to buy a feeder, which is listed on our other auction.

Condition: used, Year of construction: 1998, Overview This grinder, type: K&G WW 200-MM was built in 1998 in Germany. This machine is in good condition. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Power 50 kW Efficiency approx. 12000 kg/h (depends on the hole plate) Height 178 cm Width 165cm Length 105cm Weight 2000 kg Scope of delivery Grinder | K&G | WW 200-MM | 1998 Fzjdl88

Condition: refurbished (used), K+G Weather MWW130 The machine is in overhaul. The machine is completely overhauled. The machine has no feeding. Rated power:19 kW Total rated current:40 A Fuse protection (recommended) 3 x 50 A gL. Speed working screw:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Errors excepted and subject to prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. 8G9Apv7Xqd A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: reconditioned (used), Year of construction: 1996, Operating hours: 28,135 h, Functionality: fully functional, Pressing force: 60 t, Total width: 1,240 mm, Total length: 4,465 mm, Total height: 2,750 mm, Input voltage: 400 V, Transport height: 2,750 mm, Overall weight: 7,500 kg, Year of last overhaul: 2024, Filling opening width: 490 mm, Filling opening length: 815 mm, How do you do? We are offering you a packaging press (can press) from the manufacturer Sandersleben Maschinen- und Anlagenbau GmbH, type SMA-2500/1, with 60 t pressing force, 31 kW connected load, built in 1996. The machine has only run for 28,135 operating hours. With a compaction capacity of approx. 790 kg/m³ (depending on the material), the press is particularly suitable for compacting used disposable packaging (cans) made of ferrous and non-ferrous metals such as aluminum as well as punching waste made of steel or aluminum sheet. The package dimensions are 600 x 300 mm, the length is variable from approx. 50 to 235 mm depending on the material. Chwpicjq3Y The press has been overhauled. The following work was carried out: - Machine completely dismantled, cleaned, derusted, primed and repainted - Complete overhaul of the main hydraulic cylinder, new cylinder tube, new cylinder head, new gasket set. - Overhaul of the two cylinders from the counter pressure plate, gasket sets renewed - Knife set planned and ground - Residual emptying and cleaning of the hydraulic oil tank, new HPL 46 hydraulic oil filled and oil filter replaced - General maintenance work - Machine test We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 1998, I sell a presser from C&G. Year of production 1998.After a major inspection, new oil, reconditioned pistons, replaced hydraulic lines. The machine in perfect condition, never worked in steel scrap. It was used for copper. Imported from Italy. Dpl8Gp

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: RW-0, Payload: 1,100 kg, Key features of RW-0: 1. the product is new 2. hot-dip galvanized 3. Compatible with others of the same size - including mesh ones 4. with the possibility of stacking 5. suitable for lifting by both crane and forklift truck 6. capacity - 50 supports (number of platforms or other items depending on the arrangement) 7 Weight - 27.5kg 8. made of 60x60x2mm section. Cups and bottom caps made of 6mm sheet metal. 9. dimensions 1200x800x850mm Dplzlz 10.Declared load capacity (safe) static 1.1tons, dynamic 800kg. Maximum load capacity of 1.5 tons - individually, set on a solid base without stacking. 11. ideal for long items Galvanized modular pallet (construction basket) - for ceiling supports, H20 girders, pipes or scaffolding. The pallet is an important piece of equipment on the construction site, warehouse and all kinds of storage for the proper storage and movement of formwork, supports, punches, girders, heads. The use of such a pallet (basket) significantly speeds up the process of the construction itself because it is adapted for lifting with a crane (eyelets in the top cup), forklift or loader. Stacked pallets (up to 4 vertically) take up less space than individual bulk formwork components. Another advantage of the pallet is the transparency of storage - easy to count and estimate resources. The entire pallet structure is protected against corrosion by hot-dip galvanizing - all in accordance with PN-EN ISO 1461, which will guarantee long-lasting use. INNOVATIVE SOLUTIONS 1 We would like to inform you that our product has undergone many modifications over the years. It might seem that it is impossible to improve it more, however, we have decided to produce and test a basket marked RW-0S. The parameters listed above remain unchanged, however, an important new element is the lack of holes in the structural elements through which liquids can get inside and cause corrosion. The whole thing is done in such a way that zinc still gets inside the structure and has drains, but they are not visible from the outside. The only place where water in the form of rainwater can get in is the foot with the bottom cap, however, even this can be secured to make the basket tight. If you are interested in such a solution, please inform our salesman about it. The price will not change and you will receive a product of excellent quality. 2. in addition, an innovative solution is a basket that glows at night after illumination and reflects light (similar to horizontal and vertical markings on the road). The black and yellow (luminescent) colors are additionally covered with a special material that reflects light both at night and during the day. This goes far in the direction of health and safety solutions for construction site safety - better visible hazards for both drivers and workers on foot. Such a luminous basket/pallet, thanks to its surface, is definitely more visible than fencing tape or chain.

Condition: good (used), Height: 1800 mm Width: 1250 mm Length: 2400 mm Electrical power supply: 400V 50Hz 3N Total power: 18 kW Cf0Cyicjek Main material: stainless steel, acid-resistant Loading: integrated loader with the machine Throat diameter: 130 mm Wolf type: angle grinder Stuffing feeding system for the screw: hopper Throat construction: stainless steel Feeding screw material: stainless steel, acid-resistant

Condition: used, Door closer, floor door closer, locking body -Manufacturer: GU BKS, floor door closer UTS 42, unused, original packaging Bhhc7Xdbuo -Article No.: 50031099 -Door width: 1100 mm -Number: 3x door closers available -Price per piece -Dimensions box: 360/100/H95 mm -Weight: 3 kg

Condition: good (used), K+G Wetter 90L with ejector. Machine immediately available. The machine has been refurbished. For further questions we are at your disposal at any time. Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and/or liability is excluded. The machine remains our property until payment has been made in full. Bsswv7Ch

Year of construction: 2015, Condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 C7Rya3R Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: good (used), Year of construction: 2015, K+G Wetter AW D 114 Meat Grinder The automatic grinder work completely autonomously - it couldn't be easier. The feeder and meat worm combine to perform real teamwork for perfect processing. The special twin-worm principle of K+G Wetter ensures that the filling flow towards the cutting set remains constant and does not break off. At the same time, the different pitches of the worms ensure optimum product flow with the best cutting result and guarantee only a slight temperature increase of the material. Manufacturer: K+G Wetter Model: AW D 114 Year: 2015 Fresh Meat Processing Capacity: Up to 50 kg/min. Hopper Capacity: 110 l / 70 kg. Ycs7T98S Operating Voltage: 400V/ 50Hz Rated Connected Load: 9kW Rated Current: 20A Machine Dimensions (LxWxH) 1.200x850x1.300 mm Machine Weight: 570 kg.

Condition: refurbished (used), K+G Weather WW130 The machine has been completely overhauled by us. The machine is on site. Bf2O7Bwsuaq Errors and prior sale reserved. All information is non-binding. The accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: reconditioned (used), K+G Wetter STL120L with ejector The machine is offered as overhauled. Stainless steel bowl. Cutter shaft with new bearings. Newly painted on the inside, newly polished on the outside. Knobs new. Dplkgf Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and/or liability is excluded. The machine remains our property until payment has been made in full.

Condition: reconditioned (used), Year of last overhaul: 2024, K+G Weather SM45L The machine is offered as overhauled. All ball bearings are new. Stainless steel bowl. Newly polished on the outside, newly painted on the inside. Knobs new. Dplke7 Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and/or liability is excluded. The machine remains our property until payment has been made in full.