Transfer Tube

Putzmeister Atlas Typ 02V92

Year of construction: 2022, Condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Klelhcol R Hy Aodwvsr Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: used, Year of construction: 2010, Atlas Copco GA15VSD screw compressor system with dryer and 1,000L tank for generating and storing compressed air for industry and trade. Klolst Iwx Dohcdwvjr compressor: 15 kW Max. pressure: 12.75 bars dryer: Airgroup Type AGD 21-1008 operating hours: approx. 26,000 hours

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 16,900 mm Number of bays per rack row: 6 Number of levels plus floor level: 3 Technical data for volume: Pallet spaces per bay: 9 Number of pallet spaces per row: 72 Total number of pallet spaces: 72 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,000 kg Scope of delivery includes: 7x pallet rack uprights, used Material color: Sendzimir galvanized Upright type: P173 Profile dimensions: 100 x 75 x 2.00 mm System perforation: 50 / 50 mm Incl. cross and diagonal braces, and base plates The uprights are pre-assembled (screwed framework) Height: 6,000 mm Depth: 1,050 mm 36x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 110 x 40 mm Crossbeam type: TRV1-270-114-30 CE Hooks: 5 HK (hook) Clear width: approx. 2,700 mm Max. load per Pair of trusses 3,000 kg, with evenly distributed load 72x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 28x bolt anchors, new Klslhcdowdw H Nowvsr Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x leveling plates, used Design: Complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Quantity: 1x / shelf row Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Field of application: Construction Serial number: AVO08A1388/8992 005xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20163 Specifications: - 2008 model - Engine hours: Approx 13000 - Impact hours: Approx 6500 hours Klslhcswdvg Uodwvor - Weight: 15000 kg - Machine width: 241 cm - Track width: 30 cm - Meter counter - Angle gauge - 1838 Hammer - Stand changer - Carousel - Replaced screen - Replaced engine (unsure of hours) - Repacked cylinder on swing and tilt on tower - Service performed by owner - Undercarriage (see pictures) - Lights - Radio control - Ready for delivery Description: We have a 2008 Atlas Copco D7-01 Drilling rig w/ cop1838 hammer carousel and stand changer for sale. The engine and screen on the rig have been replaced. Some cylinders on the swing and tilt of the tower have also been repacked. The rig otherwise functions as it should according to the owner. Errors and defects may occur Ready for delivery. Hours: 13000 Total Weight: 15000 Width: 241 Hammer hours: 6500

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, color: red, Year of construction: 2023, operating hours: 17 h, Equipment: air conditioning, General information Field of application: Construction Applicable material: Waste Serial number: 252M301318 Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: Cummins Klslhjwaq Hbscdwvsr Weights Empty weight: 26.400 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Tyre size: 10.00-20/7.50 Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5,025x2,5x3,11 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - shaft width 500mm - number of knives 4pcs - max. thickness of the processed element 230mm from above: - pawls - toothed, pulling, torsional, sequential input shaft - clamps - planing shaft - clamp - smooth pulling output shaft from below: - 2 sliding rollers in the table - 5.5kW motor - manual lifting of the table - 2 types of feed speed 7.5;13m/min - diameter of the extraction nozzle 160mm - dimensions length/width/height 1100x1000x1200mm Klslhcswbdlyjdwvsr - weight 600kg ADVANTAGES - Italian production - unpainted - used thicknesser, very good condition Price net: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 1986, Condition: used, Serial number: ARP86xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20125 Kelhswdvblocdwvolr Specifications: Model year: 1986 Type: GA 355 Max pressure: 7.5 bar Power: 55 kW Ready for delivery. Kw: 55

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: Kslewbz Uxjhcdwvslr - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic blade extension - sawing units adjustable at 45° - manual spacing of sawing units - min. cutting length at 90° 300mm - max. cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90 degrees 90mm - pneumatic clamps 2pcs - control buttons - material support 3pcs - main engine 2×1.1kW - diameter of the exhaust port 2x90mm - dimensions L/W/H 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable sawing units - used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7625 Technical data: - max. diameter of processed rods 75mm - diameter adjustment possible (using sleeves) - two grinding units - 5.5kW main engine - 1.1kW wheel engine Klolewcb Dcjhcdwvsr - speed change on the 0.75kW inverter - belt width 120mm - sleeves included 1x53mm, 1x32mm - inlet, pull rollers - outlet, slip rollers - diameter of the exhaust port 160mm - dimensions length/width/height 1600/1200/1350mm - weight 705kg ADVANTAGES - Italian production - additional sleeves included - very good condition - used grinder Net price: PLN 21,900 Net price: EUR 5,150 in depending on price 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7568 Technical data: Klolhjv H Dapocdwvjr - shaft width 510mm - shaft cover - silencing comb - number of knives 4pcs - top length 2940mm - cast iron tops - both tops adjustable - original guide adjustable at an angle - 5.5kW engine - diameter of the exhaust port 140mm - dimensions length/width/height 2940x950x1240mm - weight 1330kg ADVANTAGES - Polish production - upper control panel - 4-knife shaft - used planer - very good condition Net price: PLN 16900 Net price: EUR 3970 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, CATALOGUE NUMBER 7580 TECHNICAL DATA - max. main blade diameter 400mm - max. cutting height 100mm - main blade adjustable up/down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1000mm - with side trolley Kslhcev In Rnjdwvjlr - main motor approx. 5.5kW - scoring unit motor 0.75kW - scoring unit diameter 120mm - 4 types of rotation speeds 3000/4000/5000/6000rpm - exhaust port diameter 110mm - table top dimensions with extension 1250x1220mm - blade guard - dimensions length/width/height 2900x2840x1430mm – weight 820kg ADVANTAGES – German production – with scoring saw – used saw, very good condition Net price: PLN 11,500 Net price: EUR 2,650 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7601 TECHNICAL DATA - cutting length 7400mm - main engine power 3x400V, 15kW - cutting saw width 35mm - main pulley diameter 610mm - smooth feed adjustment (pump) - hydraulically moved saw guide roller - horizontal cutting head clearance 850mm - vertical cutting head clearance 910mm Hydraulic machine equipment: - log clamp 4pcs - log turner 1pcs - loading forks 1pcs - leveling supports 2pcs - extendable stop bumpers 4pcs - cutting thickness controller - operator's platform - stationary panel - pump motor power 2x3kW - overall dimensions length / width / height 9100/3600/2700mm - total weight about 3000kg ADVANTAGES - Polish production - long track - unpainted - used sawmill, very good condition Net price: PLN 36900 Net price: EUR 8690 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) Kolhcov Sa Dbsdwvslr

Condition: excellent (used), CATALOGUE NUMBER 7632 Technical data: - spindle diameter 25mm - spindle working height 110mm - replaceable spindle - adjustable up/down - guide - 4 types of rotation speeds - tabletop dimensions 1000x1000mm - engine about 4kW - dimensions length/width/height 1150x1150x1200mm - weight 602kg ADVANTAGES - Polish production - very good condition - used milling machine Klelhcjwc N Trodwvor Net price: PLN 5300 Net price: EUR 1250 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7616 TECHNICAL DATA - shaft width 510mm - 4-knife shaft - top length 2640mm Klelhcewbdn Uedwvor - shaft cover - cast iron tops - both tops adjustable - original cast iron guide adjustable at an angle - 4kW engine - diameter of the exhaust port 160mm - dimensions length/width/height 2640x1000x980mm - weight 970kg ADVANTAGES - German production - unpainted - long tops - used planer - very good condition Net price: PLN 9900 Net price: EUR 2330 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, CATALOGUE NUMBER 7579 TECHNICAL DATA PLAIER: - shaft width 640mm - shaft cover - original cast iron guide adjustable at an angle - table top length 2000mm - both tables adjustable Kjlsv In Umshcdwvslr THICKNESSING MACHINE: - max. thickness of the processed element on the thicknesser 200mm - thicknesser shaft cover - cutting height adjustment using a knob - from above: - pawls - input shaft, pulling, toothed - pressure - planing shaft - pressure - output shaft, pulling, smooth - from below: - 2 adjustable rollers in the lower table - 2 types of feed speed 10.16m/min - main motor 5kW - dimensions length/width/height 2000x1350x1100mm - weight 1223kg ADVANTAGES - German production - solid construction - very good condition, used machine Net price: PLN 12900 Net price: EUR 3020 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7587 Technical data: - shaft width 410mm - number of knives 3pcs - brake - length of tops 2540mm - cast iron tops - both tops adjustable - original cast iron guide adjustable at an angle - 3kW engine - dimensions length/width/height 2540x1000x1050mm - weight 730kg Advantages: - Polish production - 3-knife shaft - used planer - very good condition Klolhcsv Nhgxodwvsr Net price: PLN 7900 Net price: EUR 1850 Net price calculated according to the exchange rate of PLN 4.25/EUR (with greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7613 Technical data: - inlet width 650mm - inlet height 300mm - shaft width 660mm - knife length 660mm - number of knives 2pcs - sieve dimensions 90x100mm - 2 toothed pulling shafts from the bottom - lower shaft motor 3kW - 2 toothed pulling shafts from the top - upper shaft motor 3kW - belt feeder - feed belt length 2700mm - feed belt width 630mm - main motor 75kW - auto reverse - reverse gear - overall dimensions L/W/H 5350x1300x1300mm - weight 4200kg Kljlhswa Aqlscdwvor ADVANTAGES – Italian production – auto reverse – gear reverse - used chipper, very good condition Net price: PLN 149,900 Net price: EUR 35,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number: 7531 Kelhovtl Tqscdwvelr TECHNICAL DATA Equipment: plate tape feeder guillotine glue tank (granulate) 3 pressure rollers finished cutting unit with balls 2 milling units for shaping edges (radial cutters) 2 polishers min. length of the workpiece 140mm min. width of the workpiece 60mm thickness of the glued element 10-55mm thickness of the edge tape 0.4-3mm support extending from the table engine power 5.6kW diameter of the extraction nozzle 120mm dimensions L/W/H 3480x1050x1020mm weight approx. 900kg – unpainted – Austrian production – year of production 2007 – very good condition good – used edge banding machine Net price: 18900PLN Net price: 4450 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOG NUMBER 7513 Technical data: - max. diameter of the main blade - without the scoring blade 400mm - max. cutting height 120mm - max. diameter of the main blade - with the scoring blade 300mm - max. cutting height 70mm - diameter of the blade hole 30mm Klelhcdwsvfp Iiover - diameter of the scoring spindle saw 100mm - diameter of the scoring spindle tip 20mm - main blade adjustable up/down - blade guard - locked spindle - length of the carriage 2600mm - cutting width at the guide 900mm - with a side carriage - main engine 5.5kW - power of the scoring spindle engine 0.75kW - 2 types of rotation speeds - table top dimensions 1200x700mm - diameter of the extraction nozzle 100mm - dimensions length/width/height 2600x3300x1100mm - weight 790kg ADVANTAGES - German production - used saw, very good condition Net price: PLN 9500 Net price: EUR 2230 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7552 Technical data: - dimensions of heating plates 2550x1350mm - number of batches 2 - electrically heated shelf - total clearance 400mm - clearance between shelves 280mm and 100mm - number of cylinders 4 Kelhcdwjvyzkfjvjlr - cylinder diameter 90mm - pump motor 1.1kW - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES - German production - electrically heated shelves - unpainted - very good condition - used press Net price: PLN 28900 Net price: EUR 6790 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, CATALOGUE NUMBER 7576 TECHNICAL DATA - max blade diameter 400mm - blade hole diameter 30mm - spindle lock - max cutting height 100mm - main blade adjustable up/down - blade guard - cutting width at the guide 1230mm Kelhcov Iyl Dsdwvelr - main engine approx. 3.7kW - table top dimensions 950x730mm - dimensions length/width/height 1700x1200x1020mm - weight 470kg ADVANTAGES - German production - used saw, very good condition Net price: PLN 4900 Net price: EUR 1150 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7570 Technical data: - hydraulic pressing force - round briquette form - briquette diameter 60mm - tank dimensions L/W/H 800x590x800mm - minimum trout level sensor in the hopper - automatic machine operation - inspection window in the machine hopper - 5.5kW pump motor - smooth regulation of the auger rotation - dimensions L/W/H 1300x1500x1270mm - weight 736kg ADVANTAGES - briquette diameter 60mm - used briquette press - very good condition Net price: PLN 23,900 Kjlhjv H Dd Ijcdwvolr Net price: EUR 5,630 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7622 Technical data: - max. width of the processed element 200mm - max. height of the processed element 190mm - 2 grinding units: - metal roller + shoe + metal roller from above - metal roller + shoe + metal roller from below * from above: - 2 pressure rollers, rubber, pulling - grinding unit - sliding roller - 2 pressure rollers, rubber, pulling * from below: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW - 6 types of feed speeds + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.6kW - main motors 2x4kW - diameter of exhaust ports 80mm, 90mm - overall dimensions length/width/height 1420x660x1700mm - weight 608kg ADVANTAGES - German production - 2 aggregates Klelhcdwswbz I Eovsr - used grinder, very good condition Net price: PLN 11,900 Net price: EUR 2,800 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7416 TECHNICAL DATA - chiseling depth 140mm - chiseling unit 1pc - left and right fence 2000/1300mm - engine power approx. 2.5kW - adjustable chiseling depth - adjustable chiseling width - unit height adjustment - feed speed adjustment - right/left rotation - pneumatic material clamping from the side 1pc - pneumatic material clamping from the top 2pcs - pneumatic feed - air pressure 6-8bar - table top dimensions 1000x280mm - additional chisels included - exhaust port diameter 1x120mm, 1x150mm - dimensions L/W/H 4550/1200/1200mm, weight 628kg – drill and chisel - additional chisels included - made of cast iron Kjlhcdwot N T D Eovelr - chisel used, unpainted, very good condition Net price: PLN 7,500 Net price: EUR 1,750 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7624 Technical data: - max. diameter of processed rods 80mm - diameter adjustment possible (using sleeves) - two grinding units - 4kW main engine Klslhowb Ah Hjcdwvor - 1.5kW wheel engine - smooth speed regulation - belt width 120mm - sleeves included 1x30mm, 1x49mm - inlet, pull rollers - outlet, slip rollers - diameter of the extraction nozzle 150mm - dimensions length/width/height 1400/1150/1440mm - weight 680kg ADVANTAGES - Italian production - additional sleeves included - very good condition - used grinder Net price: PLN 22,900 Net price: EUR 5,390 depending on the price 4.25 EUR (Prices may change with higher fluctuations)