Baler

Papenbrock 830x600xH1180 mm

Condition: good (used), Storage trolley - Order picking trolley length 1045 mm width 700 mm Ca2Tfnou height 890 mm total Length 1150 mm

Condition: excellent (used), Year of construction: 2003, UV Dry Tech Thieme / Tesoma, Year 2004. Very good condition. Drying width 700 mm, belt width 800 mm 1 lamps with 120W/cm power and cooling unit Cro9Zofhkm * 1200 mm inlet, * Cooling module * 500 mm outlet

Condition: like new (used), Ideal for traverses 2700 mm. L0Rli3K0S If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: like new (used), Year of construction: 2022, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 m usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) 8Med3Imfm7 - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), 1 x die block , W x H approx. 3500 x 260 x 190 mm , . Total length = 3500 mm Length with reducers = 2600 mm Bsm2Vygtxqg . V-groove, without reducers, opening width approx. 100 mm V-groove , with reducers , opening width approx. 150 mm, H = 220 mm . Weight estimated over 1 to .

Condition: good (used), Functionality: fully functional, total length: 1,850 mm, total height: 1,650 mm, total width: 1,500 mm, overall weight: 2,000 kg, Caterpillar multi saw 280 mm Specifications: condition - used, to be inspected width of track 280 mm max cutting height 100 mm blades with a diameter of 250 mm speed control of the caterpillar on the variator suction nozzle fi 120 mm (reduced) original painting overall dimensions 185 x 150 x 165 cm (l. x w. x h.) weight about 2 000 kg Additional information: machine to be reviewed and minor corrections, including missing track bars (about 15 pieces) belts and bearings on the spindle Sbtk22Mcll presented photos illustrate the actual state of the object of sale possibility to turn on and check the device on site. the price given in the auction does not include VAT

Condition: used, Multiplex boards used length 1680 mm width 1250 mm board thickness 45 mm 7Ykvuwvull weight 68,5 kg in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: good (used), We offer you here a used compensation plate of the manufacturer Polypal for sale. Included in delivery are: 01x shim, used Manufacturer: Polypal Bymtgfp3Ln Type: SKUP Material colour: sendzimir galvanized dimension: approx. 130 x 85 mm thickness: approx. 1,25 mm Weight/piece: 0,119 kg

Condition: like new (used), Year of construction: 2024, Double-sided cantilever rack used: Hot-dip galvanized screw system Scope of delivery: 4 uprights, double-sided Height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - 6 screw-on cantilever arms and 2 base sections with a depth of 1,200 mm per upright, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Zirmu3Xa - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), Wedge bar chuck (28319) diameter 290 mm Chwbfzkjyk Cylindrical 78 mm thread increase 6 mm Weight 54 kg

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used partition wall of the manufacturer Schulte for sale. Technical data of the partition wall: Manufacturer: Schulte The partition wall is suitable for a shelf depth of of 250 mm. The scope of delivery includes: 01x partition wall, used Material colour: galvanised Total width: approx. 230 mm weight / piece: approx. 0,361 Kg Partition wall (height): approx. 150 mm Mwq0Lw The partition wall is used and could have slight show slight soiling, dents, scratches, or similar. Our services at a glance: (prices on request) Assembly, installation our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 2,600 mm with base section 1,000 mm usable depth 12 cantilever arms with 1,000 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. E2Jjtua The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), The scope of delivery includes: 01x steel panel, used Manufacturer: SSI Schäfer material color: sendzimir galvanized B8Tx9Eo8S7 for frame depth: ca: 1.000 mm width: approx. 298 mm height: approx. 55/40 mm material thickness: approx. 1,00 mm weight / pcs.: 4,11 kg

Condition: as good as new (ex-display), Year of construction: 2024, carrying capacity per cantilever arm: 720 kg, shelf height: 3,500 mm, total length: 4,000 mm, axle spacing: 1,300 mm, total height: 3,500 mm, clearance between the columns: 1,300 mm, load capacity per stand: 2,250 kg, Equipment: double-sided, Double-sided cantilever rack in hot-dip galvanized design: Scope of delivery: 4 double-sided shelving uprights, height 3.5 m, foot section per upright side 1.2 m usable depth and tire protection 24 cantilever arms with angle deflector and 1.2 m usable depth (suspension system) Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) Net price: € 2,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Shelf height 3,500 mm - Shelf length 4,000 mm - Load capacity per upright side 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 cantilever arms per upright side with angle deflector (suspension system) (= 4 storage levels per upright side) - Load capacity per cantilever arm 720 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Dm2Prn

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x steel panel, used Material color: sendzimir galvanized total width: approx. 300 mm total depth: ca. 600 mm clear width: approx. 535 mm frame height: approx. 30/22 mm hole spacing: approx. 230 mm holeØ: approx. 8 mm support: approx. 30 mm material thickness: approx. 1,00 mm General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed B9Ix00Xgfk Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,000 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm B8Vvxohvd0 - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 01x roller bar, used Material color frame: galvanized Frame profile: approx. 35 x 28 mm (WxH) material color rolls: similar cream white total length: approx. 2.025 mm total width: approx. 35 mm roller width: approx. 17 mm distance between rollers: approx. 25 mm Diameter of rollers: approx. 25 mm Total height: 35 mm Roll material: Plastic General information about the article: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Mwyauo Delivery with our own fleet (without unloading)

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Yqd0Qpp Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,000 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone B8V7I2Abol - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2023, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,500 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time 072Mnahg - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 2,600 mm with base section 1,000 mm usable depth 12 cantilever arms with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible 8Mf2Ym029V Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) 0Vpfkzum - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Double-sided cantilever rack used: Hot-dip galvanized screw system Scope of delivery: 4 uprights, double-sided Height 3,500 mm with base sections 1,200 mm each 24 cantilever arms with a depth of 1,200 mm, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fixing material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - 6 screw-on cantilever arms and 2 base sections with a depth of 1,200 mm per upright, standard 8Shgoiauds = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) E2Jkque Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to support the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Icqpoj3Rz Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard