CNC Coordinate Boring & Milling Machine

Oerlikon KB4

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M Ssqwo0Otu pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R 0 - 3000 / T 0 - 5000 1/min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: good (used), overall weight: 20,000 kg, Bevel Gear Planner OERLIKON K4a Maximum gear ratio i=1:8 Maximum pitch diameter of the gear in i=1:1 1 250 mm Maximum pitch diameter of the gear in i=1:8 1 600 mm Gpdwxc The biggest module 30 The smallest module 2 Maximum number of teeth 300 Minimum number of teeth in i=1:1 20 Minimum number of teeth in i=1:8 10 Maximum width of the tooth 300 mm Maximum lift of the planer heads 320 mm Minimum lift of the planer heads 50 mm Maximum radius of the basic gear 950 mm Minimum radius of the basic gear 170 mm Maximum angle of the pitch cone 83° Minimum angle of the pitch cone 7° Maximum distance of the face plate from the cone peak 950 mm Minimum distance of the face plate from the cone peak

Year of construction: 2009, Condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm Bz7O3Sl2Ok - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 1995, Condition: excellent (used), 1500 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 1,2 rpm diameter rotary table 1200mm inclination up to 135 height horizontal approx. 1020mm, tilted to middle 720mm length 1,7 m x width 1,2 m E2Zwzd9Xi with remote control

Condition: used, Year of construction: 1998, machine/vehicle number: 289 570,

Condition: good (used), 1 x Oerlikon cantilever drilling machine UB 2 Technical data follow Dk8Fcbmuj The machine can be inspected under power.

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Dqxjwf Own lapping system! Was also operated at a lapping center

Condition: used, Functionality: unexamined, overall weight: 17,000 kg, Brand Oerlikon Model: SM3 Year of manufacture: not mentioned Serial number: 288537 Capacity (Kw) 19 Voltage 380 Frequency (Hz) 50 Weight (kg) approx. 17000 Ø max. turning diameter (mm) 640 Made in Switzerland Comments No accessories, chipconveyor included, coming from major Truck brand manufacturer Condition of sale As / is - Where / is C92Lesu

Condition: good (used), Functionality: fully functional, load capacity: 1,000 kg, table height: 1,300 mm, table width: 800 mm, rotational speed (min.): 3 rpm, Equipment: rotational speed infinitely variable, Table : 800 x 800 mm 1000 KG Cklfrtfsk

Condition: good (used), load capacity: 5,000 kg, Welding turntable Oerlikon 5000 kg 3 axis height adjustable, top condition Complete set incl. hand and foot remote control Speed infinitely variable 0.01 to 1.1 rpm Hydraulic height adjustment Dimensions: height tilted min: 980mm height tilted max: 1700mm height horizontal approx. min: 1200mm height horizontal max: 19500mm Diameter of the clamping disk 1400mm Bmr8Wm2Ugl7 Length 2900mm, width 1400mm with control box 1700 Speed from 0.01 to approx. 0.7 rpm.

Condition: used, Year of construction: 1998, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 weight: 13000 kg Face Milling-Single Part Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Dpo7Ah Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: used, Oerlikon Leybold Vacuum RUVAC, roots vacuum pump with air cooled canned motor, WSU 2001 H, 155 066Model:  155066Typ: WSU2001HOperation with e: The pumps have a lot of dirt, more details can be seen in the a: Connection: DN 160 ISO-KNominal pumping speed (50Hz): 2050 m³/hNominal pumping speed (60Hz): 2460 m³/hNominal pumping speed (100Hz): 4100 m³/hmax. pressure difference (50Hz): 50 mbarmax. pressure difference (60Hz): 50 mbarmax. pressure difference (100Hz): 25 mbarLeak rate, integral: < 1 x 10-4 mbar x l/smains supply:  3-ph., 200-230/400V AC, 50Hz / 200-265/460V AC, 60HzMotor power (50Hz): 5-7.5 kWMotor power (60Hz): 5-8.5 kWMotor:  VUF160M/2-130 B2K3Mypt9P

Condition: as good as new (ex-display), Oerlikon Leybold COMBIVAC CM 52 evaluation module with Display, 230116, CM52PBModel: 230116, CM52PB100 - 240 V AC, 50/60Hz 3 chanels 5 x 10-4 - 1000 mbar (channel 1+2) Fnts0Pmy

Condition: excellent (used), Functionality: fully functional, Oerlikon Leybold Vacuum GmbH RUVAC Roots vacuum pump with PFPE filling, L41000 oil, 155 153, WHU 4400 PFPE Brsheqysy8E Model: 155153 Type: WHU4400PFPE Serial number: 31000818751 Year of manufacture: 2013 400/460V AC 18,5kW 4.400m3/h 30mbar

Condition: good (used), Functionality: fully functional, Oerlikon Leybold Vacuum GmbH Dry compressing screw vacuum pump, ScrewLine, 115 003 ATEX 3i, SP250 Model: 115003ATEX3i Type: SP250 Condition: Used Technical data: ScrewLine 200-460V AC 50/60Hz 14,5-39A 7.3/9.2kW 270-330m3/h General information: with electromagnetic gas ballast and sealing gas for seal ATEX 3i Pumping capacity: 270 m³/h at 50 Hz, 330 m³/h at 60 Hz Ultimate pressure: ≤ 1 x 10^-2 mbar without gas ballast, ≤ 2 x 10^-1 mbar with gas ballast at 50 Hz, ≤ 2 x 10^-2 mbar with gas ballast at 60 Hz Inlet/outlet connections: DN 63 ISO-K Operating fluid: LEYBONOL LVO 210, capacity 7 liters Noise level: 67 dB(A) at 50 Hz, 72 dB(A) at 60 Hz Motor: 7.5 kW at 50 Hz, 11.5 kW at 60 Hz Motor protection class: IP 55 Ambient temperature range: +12 to +40 °C Accessories: Outlet silencer with condensate drain 119 002 Volume: 15L max. temperature: 110°C max. pressure: 500mbar Monitoring system SPGuard 119 041 Power supply: 24V DC, 200mA Sgo8U298Cj SW: 01.04 2x seal 71237044 Note on item condition: Rust spots on the screw connections and flash rust on the flanges, please refer to the pictures for more detailed information.

Condition: as good as new (ex-display), Oerlikon Leybold Vakuum Cryopump, 844224V0002 + 400000250 + 400000801, COOLVAC 1500 + RGD 7 25Model: 844224V0002 + 400000250 + 400000801Data: Cryopump220-240V AC50/60Hz1,5A278VAHigh vacuum (HV) flange: DN200CFForevacuum flange: DN25 ISO-KFFlange for connection a gauge head: DN 16 ISO-KFFlange for the electrical connection: DN 16 ISO-KFHeaters 1st stage: 160W, 42V ACHeaters 2nd stage: 90W, 42V ACTemperature sensor 1st stage: PT 100Temperature sensor 2nd stage: Si diodePumping speed H2O: 4600l/s ±10%Pumping speed Ar/N2: 1200/1500l/s ±10%Pumping speed H2: 2500l/s ±10%Capacity Ar/N2: 1000/1000bar*lCapacity H2 at 10-6mbar: 15bar*l (for regenerated cryo pumps under short-term loads only)Max. throughput Ar/N2: 12/12bar*l/s, 9/9Torr*l/sMax. throughput H2: 6bar*l/s, 4.5Torr*l/s (for regenerated cryo pumps under short-term loads only)Built-in cold head: COOLPOWER 7/25Crossover value: 210mbar*l, 155Torr*lCooldown time to T2=20K: 60minHelium connections (Self-sealing couplings, outside thread, type 5400-S2-8): DN1/2" Dnjw0F

Condition: as good as new (ex-display), Oerlikon Leybold Radio Transmitter RT100 /St1 + RT 100 /St2, 252009 + 252012Model: 252009, 252012 Fqm92G7W

Condition: used, Oerlikon Leybold, Adsorber baked out, E840002863Model: E840002863 Bjq9Nh0Hs0U

Condition: new, Oerlikon Leybold, Cable, 844252Model: 844252 Dnjwdv

Condition: as good as new (ex-display), Oerlikon Leybold Vakuum Cryopump, 844224V0004 + 400000250, COOLVAC 1500Model: 844224V0004 + 400000250Data: Cryopump208V AC1,5A278VAHigh vacuum (HV) flange: DN6" ANSIForevacuum flange: DN25 ISO-KFFlange for connection a gauge head: DN 16 ISO-KFFlange for the electrical connection: DN 16 ISO-KFHeaters 1st stage: 160W, 42V ACHeaters 2nd stage: 90W, 42V ACTemperature sensor 1st stage: PT 100Temperature sensor 2nd stage: Si diodePumping speed H2O: 4600l/s ±10%Pumping speed Ar/N2: 1200/1500l/s ±10%Pumping speed H2: 2500l/s ±10%Capacity Ar/N2: 1000/1000bar*lCapacity H2 at 10-6mbar: 15bar*l (for regenerated cryo pumps under short-term loads only)Max. throughput Ar/N2: 12/12bar*l/s, 9/9Torr*l/sMax. throughput H2: 6bar*l/s, 4.5Torr*l/s (for regenerated cryo pumps under short-term loads only)Built-in cold head: COOLPOWER 7/25Crossover value: 210mbar*l, 155Torr*lCooldown time to T2=20K: 60minHelium connections (Self-sealing couplings, outside thread, type 5400-S2-8): DN1/2" Blivdutue

Condition: used, Oerlikon Leybold Vacuum GmbH TRIVAC rotary vane mechanical vacuum pump with aluminium frame, D25BCS PFPE, 113 79Model: 11379Type:  D25BCSPFPETechnical data: 218-480V AC50/60Hz2,2-4,3A0,75/0,85kWVolume flow rate: 25m3/hUltimate pressure: <=8x10-4mbarGasballastMotor: Koncar-MESA673621380 66 0025.5AZE 80B-4 Ci3Anzzq

Condition: used, Leybold GmbH Transmitter, 15927 Model: 15927 Data: CERAVAC 15/18…26V DC Bxy9Qrup0E 19W max 1000 Torr with plug D-Sub 15-pin male Measuring range: 10 Torr Volume: 7cm3 Temperature range: +15...+40°C

Condition: used, machine/vehicle number: SN: S30000625916, Leybold Vacuum GmbH Turbostream vacuum pump, S 1500 SN, 858 79Model: S1500SNProduct no.: 85879SN.: S30000625916Revision year: 2006Revision level: ABVoltage: 320V ACFrequency: 734HzRated current: 9APower: 3.59kWSpeed: 44040rpmS1Cooling water: 110l/hIP23 Bcwpfd

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Leybold Vacuum GmbH Turbomolecular pump + frequency converter, 800040V1444, TURBOVAC T1600 Model: 800040V1444 Cger0Hnb Type: TURBOVACT1600 Contidtion: Used Technical Data: 100-240V AC 50/60Hz 700VA General: Turbomolecular pump with integrated frequency converter with NT 1601 (two-piece) High vacuum port: DN 250 ISO-F Max. permissible high vacuum pressure (pHV) for continuous operation: 5·10-2 mbar Pumping speed for N2 at pHV < 10-3: 1,550 mbar Forevacuum port: DN 40 KF Max. permissible forevacuum pressure (pVV) at the forevacuum port for N2 for continuous operation: 5·10-1 mbar Max. gas throughput for N2 for continuous operation: 1.500 sccm; 25 mbar·l·s-1 Nominal speed: 30,000 rpm Nominal frequency: 500 Hz Miniumum speed: 18,000 rpm Run-up time without load: < 10 min Weight: 40 kg Purge gas port: 1/4" Purge gas: dry ambient air or N2 Purge gas requirement: 36 sccm; 0.6 mbar·l·s-1 Max. purge gas pressure, abs.: 1.0 - 1.5 bar Max. humidity in the purge gas: 10 ppm Cooling water connections: 3/8" Voltage range, nominal: 85 - 265 V mains frequency: 50/60 Hz Power consumption maximum: 1200 VA while running up: 700 VA during normal operation without gas load: 300 VA Load rating for the relay outputs, max.: 48V / 0.5A Noise level: 39 dB(A) Ambient temperature during operation: 10 to 40 ° C while shelved: - 15 to + 60 ° C Relative humidity of the air (non-condensing: 5 to 85 % Protection: IP 54 Note on the item condition: contamination-free

Condition: new, Oerlikon Leybold THERMOVAC vacuum gauge, 15798, TM 23Model: 15798, TM23 Ndojtezme2