LZS - lathe

Meuser M 3

Condition: ready for operation (used), A Meuser M 30 R radial drilling machine is for sale. The small power pack has a throat depth of 1000 mm and MK 4 0mfh8eiy There seem to be hardly any of these little things left. A Meuser M 30 R radial drilling machine is for sale. The small power pack has a throat depth of 1000 mm and MK 4 There seem to be almost none of these little things left. Visually a few signs of use but technically very good. MK 4 mount Year of manufacture is unknown to me The clamping for swiveling and for the gearbox is mechanical Projection center column center spindle approx. 1000 mm With the tubes under the drilling machine, the table currently has a height of approx. 950 mm I am at your disposal for any questions

Condition: used, turning length 1650 mm turning diameter over bed 410 mm turning diameter over slide rest 240 mm spindle turning speed range 28 - 1250 U/min spindle bore 52,0 mm morse taper MK 4 quill stroke 110 mm bed width 320 mm total power requirement 5,5 kW weight of the machine ca. 2200 kg. dimensions of the machine ca. 2950 x 1200 x 1500 mm Nk7y0uxy from a maintenance workshop Furnishing: - robust lead/pull spindle machine - 4-jaw chuck Ø 240 mm - 4-jaw chuck Ø 250 mm - 3-jaw chuck Ø 250 mm - including replacement jaws - MULTIFIX steel holder, with insert - movable tailstock - Food key - movable bed stop - Protection for bed rails - rotating center punch - Taper mandrel including keyless drill chuck - fixed bezel - rotating bezel - User manual (PDF) * Machinevideo : ?v=XQyZO8rMssA

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm arm length 1250 mm workpiece height max. ca. 1150 mm Bgcmrilj3mi bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 25 - 2000 U/min feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm column diameter 350 mm total power requirement 7,5 kW weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump

Condition: used, Year of construction: 1967, Drilling capacity in steel (diameter) 35 mm Throat 1250 mm Drilling capacity in cast iron 40 mm Spindle mounting: MK 4 2po7ku

Condition: used, Year of construction: 1970, machine/vehicle number: 42689, height of centers: 600 mm center distance: 1500 mm max. circulation-Ø over bed: ueber Bett 1250 mm Dmhkb8l spindle boring: 102 mm retainer taper tailstock: K 80 MK spindle speed: 8 - 400 rpm forwarding feed: laengs/plan 0,028-2,82/0,007-0,73 mm/U thread pitch: 0,25 - 192 mm electrical connection: 380 V, 10 kW space needed: 4730 x 2200 x 1700 mm weight: 11000 kg

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473, Manufacturer Meuser Type M 70 R Year of manufacture 1970 Condition very good working Technical data throat 1800 mm Drilling spindle mount MK6 Czu3vkjwvk drilling capacity max. 120 table size 2000x1100 mm cube table 700x700x500mm weight 8000 kg With support column Hydraulic and electric plan are available

Condition: used, bore capacity in steel (diameter) 35 mm arm length 1250 mm Orsddubs9 workpiece height max. -- mm turning speeds U/min taper MK 4 weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1965, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm centre height 205 mm Hiinzwa37 centre distance 1000 mm spindle bore 47 mm spindle turning speed range 28 - 1250 U/min feeds - longitudinal 0,03 - 8,8 mm/U feeds - cross 0,006 - 1,84 mm/U thread - mm pitch 0,25 - 76 mm thread - inch 1/2 - 152 Gg/" thread - module 0,25 - 22 mm bed width 320 mm tailstock quill diameter 55 mm tailstock taper MT 4 face slide travel 290 mm upper slide travel 120 mm total power requirement 5,5 kW weight of the machine ca. 1,3 t dimensions of machine L x W x H 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant

Condition: new, Year of construction: 2021, Dimensions (L/W/H) 4251 * mm Bc9xfttuzok

Condition: excellent (used), Year of construction: 2010, The 3M_Matic 700r-E is an automatic carton sealing machine that automatically adjusts to different carton formats coming to the machine in any order. The patented 3M AccuGlide II gluing heads for precise U-sealing at the bottom and top are removable for maintenance work. Good condition, no maintenance backlog, with light signs of use, plastic guard missing. Ready for immediate use . Ccgr8ugdwy

Condition: like new (used), 800 m² storage platform Schäfer R3000 3-story 3yyizgor used, top condition, as good as new, see pictures 3 floor shelf system Schäfer Lift included Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 2.500 m² storage platform Schäfer R3000 2-3 storeys used, top condition, as good as new, see pictures Manufacturer SCHÄFER R3000 Bzu0k0j CAD planning and assembly 2-3 floors Price on request! Partial sale possible Negotiation price: on request! Goods are in stock and promptly available Transport and assembly possible on request. Visits are possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), Year of construction: 1996, Operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width 1. aggregate rubberized roller Cxzakcg 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Vacuum carpet

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. Hvpnifh To get to our site, please click on our logo!

Condition: used, Year of construction: 1973, machine/vehicle number: 166 101, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Prakma M/3/St./RillYear ca. 1973 - Serial-No. 166 101-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- B98r8b9wdy -Available Immediately - Can be inspect- -On Stock Emskirchen / Nürnberg - Can be test-

mileage: 229,800 km, power: 130 kW (176.75 PS), year of first registration: 2,008, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: grey, year of inspection (TÜV): 2,023, month of inspection (TÜV): 9, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 6,050 mm, loading space height: 2,370 mm, Condition: used, machine/vehicle number: NEW-16, Equipment: ABS, Soot filter, Tail-lift,

Condition: new, Year of construction: 2019, Energie-efficiëntieklasse IE2 Vermogen (kW) 55 Snelheid (tr/min) 1500 Montage B3T Aantal polen 4 Nom. (meet)spanning (V) 400/690 Nom. (meet)frequentie (Hz) 50 Framegrootte volgens IEC 250S/M Rendement bij 50% belasting (%) 94.3 Rendement bij 75% belasting (%) 94.7 Teio8loo Rendement bij 100% belasting (%) 94.7 Asdiameter (mm) 65 Materiaal Gietijzer Gewicht (kg) 440 PTC Thermistor Ja

Condition: new, Year of construction: 2023, Field of application: Construction Please contact Javac - Belgie for more information - Product Description: - Compressor TX-3 BIS Sensational solution for the do-it-yourselfer who does not have 400 volts. Air displacement 1000 liters per minute. 78cqpro 2 x 4 HP at 230 volts with only 16 amps E-motors specially developed by Javac with our famous Nanomag technology. Slow runner, with 150 liter drum, and interbuffer. - The TX-3 BIS , with its 150 liter boiler, and especially the capacity of an intake volume of +1000 liters per minute, at a working pressure of 10 bar, this powerful compressor, with an extremely large air flow, is the ultimate solution for all those who strive for a high air output, but on 230 volt mono. We have indeed succeeded in developing this compressor equipped with 2 x 4 HP (nano) motors, with a very high Cos Phi, allowing to run both motors simultaneously on a fuse of only 16 AMP, for sandblasting, bead blasting , whether or not in a sandblasting cabinet equipped with a sandblasting gun with a nozzle up to 8 mm, or cleaning antique furniture, or derusting old iron, makes this the ideal "sandblasting compressor" for both the private and the more professional user. But also for the most diverse applications where a large air flow rate is necessary on 230 volt mono. Indeed, it is not always obvious to use 3 x 400 Volt power current (eg tasks on the move) or a petrol engine driven compressor (in enclosed spaces) as an air compressor. Look no further, Javac is the only one to unite all these qualities of compressed air in 1 compressor, the TX-3 BIS. - Technical data: - Model: TX3-Bis Engine: 2 x 4 HP Voltage: 230 volt mono 50 Hz Drive: V-belt drive Aspirated flow rate: 1000 lt/min Boiler: 150 liters Pump speed: 850 rpm Alloy pump: Cast steel Cylinders: 2 + 2 Starting system: Interbuffer Bore: 2x2x65mm Working pressure: 10 bar Dimensions LxWxH mm: 1430x840x420 Weight: 210 KG - Warranty 5 years. - All our appliances are new! - All specifications, descriptions, hyperlinks and images and prices shown are purely informative, not binding and subject to errors and changes. All prices quoted are exclusive of 21% VAT. - ( Javac - Compressed air - Compressor - Compressors - Scroll - Bulkheads - Screw compressor – Outlet ) -

Condition: used, Sheet metal shears, sheet metal shears, sheet metal sheet shears, crank sheet metal shears -Manufacturer: Cidan, mechanical guillotine shears type MS-M 10/3 E2lji7y -Cutting width: 1040 mm -Max. Cutting thickness: 3.0 mm -Back gauge: 500 mm -Throat: 660 mm -Setting dimensions: 1840/1330/H1130 mm -Transport dimensions: 690/1330/H1130 mm -Weight: 880 kg

mileage: 229,800 km, power: 130 kW (176.75 PS), year of first registration: 2,008, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: grey, year of inspection (TÜV): 2,023, month of inspection (TÜV): 9, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 6,050 mm, loading space height: 2,370 mm, Condition: used, machine/vehicle number: NEW-24, Equipment: ABS, Soot filter, Tail-lift,

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Martonair -Type: M/20152/6123D -Magnetic valve -Connection: 1/4" inch Vreqri -Number: 1x valve available -Price: per piece -Weight: 0.6 kg

Condition: used, Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, solenoid valve Bmfoe0uupg -Manufacturer: Alco, solenoid valve for refrigeration, unused original packaging -Type: 200 RB 4 T 3 (m)/PCN 801 176 -Connections: 10 mm ODF -Dimensions package: 140/100/H50 mm -Weight: 0.3 kg

mileage: 144,049 km, power: 235 kW (319.51 PS), year of first registration: 2,014, month of first registration: 11, overall weight: 26,500 kg, fuel type: diesel, color: blue, axe configuration: 6x2, maximum load weight: 11,550 kg, empty load weight: 14,950 kg, tire size: 315/70r22,5, wheelbase: 3,600 mm, gearing type: automatic, emission class: euro6, suspension: air/air, loading space width: 960 mm, loading space length: 5,500 mm, Condition: used, Year of construction: 2014, machine/vehicle number: 773570978, Equipment: ABS, Air conditioning, Onboard computer,

mileage: 58,289 km, power: 66 kW (89.73 PS), year of first registration: 2,004, month of first registration: 10, overall weight: 4,800 kg, fuel type: diesel, color: orange, gearing type: mechanical, Condition: used, Year of construction: 2004, machine/vehicle number: NEW-21, Equipment: ABS, All wheel drive,

mileage: 187,485 km, power: 97 kW (131.88 PS), year of first registration: 1,996, month of first registration: 3, overall weight: 7,490 kg, fuel type: diesel, color: white, axe configuration: 4x2, maximum load weight: 1,830 kg, wheelbase: 3,100 mm, driver cabin: other, gearing type: mechanical, emission class: euro2, loading space width: 2,200 mm, loading space length: 3,400 mm, loading space height: 400 mm, Condition: used, machine/vehicle number: 5284, Equipment: Crane, Trailer coupling,

mileage: 75,541 km, power: 74 kW (100.61 PS), year of first registration: 2,017, month of first registration: 10, fuel type: diesel, color: white, axe configuration: 4x2, year of inspection (TÜV): 2,024, month of inspection (TÜV): 1, gearing type: mechanical, emission class: euro6, loading space width: 1,520 mm, loading space length: 2,150 mm, loading space height: 1,210 mm, Condition: used, machine/vehicle number: 29082, Equipment: ABS, Air conditioning, Airbag, Central locking, Electronic stability program (ESP), Fog lights, Immobilizer system, Navigation system, Onboard computer, Sliding door, Soot filter, Spoiler, Trailer coupling,

year of first registration: 2,018, month of first registration: 6, overall weight: 30,000 kg, axe configuration: 3 axles, maximum load weight: 23,370 kg, empty load weight: 6,630 kg, tire size: 235/75r17,5 ---/140j, suspension: steel, loading space length: 8,800 mm, Condition: used, machine/vehicle number: 136023, Equipment: ABS,

Condition: refurbished (used), Year of construction: 2016, Operating hours: 10,726 h, machine/vehicle number: FN512734, Friedmann Forklifts - Remade for Action Used lift trucks from selected premium manufacturers fully serviced, tested and reconditioned by us according to FEM-4.004 (UVV) specifications. Individual conversions of any kind on customer request possible. Tzv3ku0u International transport with suitable vehicles and customs clearance possible on request. Convince yourself and visit us in our factory. Friedmann Forklifts - Quality promise Full functionality according to FEM-4.004 Maintained & tested (C5-Test) battery for electrical equipment (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments and hydraulic system tested Steering axle tested for safety Forks and lifting chains with a max. wear limit of 40%. Driver's seat and safety belt as good as new New paint in original colors and original stickers Manufacturer: Jungheinrich Type: Jungheinrich EFG 216 - electric front loader Drive type: Electric lifting capacity: 1.600 kg Lifting height: 4.800 mm Load center: 500mm Year of manufacture: 2016 Operating hours: 10.727 Serial No.: FN512734 Mast data Mast type: Triplex Lifting height: 4.800 mm Fork length: 1.150 mm Dimensions Overall height: 2.100 mm Dead weight: 2.987Kg + 970Kg battery Battery & charger Battery Volt: 48 V Battery year of manufacture: 10/2021 Battery capacity test C5 91% Battery Maintenance: 09/2023 Battery AH: 750 Charger Volt: 48 V (on request) Attachments & special equipment Attachments: sideshift Optional equipment: free lift, working lights, bluespot, bodyguard system. Front tires: solid rubber (non-marking) Rear tires: Solid rubber (non-marking)

Condition: used, Year of construction: 2004, machine/vehicle number: 3M22 11 2130, rolling capacity max.:6,1 t workpiece diameter:160 mm workpiece length:25 mm total power requirement:14 kW weight of the machine ca.:4000 kgs dimensions of the machine ca.:2,5 x 2,5 x 2,1 m Internal rolling machine for transmission shift sleeves Sw2ru8

mileage: 58,289 km, power: 66 kW (89.73 PS), year of first registration: 2,004, month of first registration: 10, overall weight: 4,800 kg, fuel type: diesel, color: orange, gearing type: mechanical, Condition: used, Year of construction: 2004, machine/vehicle number: NEW-22, Equipment: ABS, All wheel drive,

mileage: 1,000 km, power: 250 kW (339.91 PS), year of first registration: 2,008, month of first registration: 2, overall weight: 7,500 kg, axe configuration: 4x2, maximum load weight: 6,492 kg, driver cabin: other, gearing type: other, Condition: used, machine/vehicle number: 5270,

mileage: 144,049 km, power: 235 kW (319.51 PS), year of first registration: 2,014, month of first registration: 11, overall weight: 26,500 kg, fuel type: diesel, color: blue, axe configuration: 6x2, maximum load weight: 11,550 kg, empty load weight: 14,950 kg, tire size: 315/70r22,5, wheelbase: 3,600 mm, gearing type: automatic, emission class: euro6, suspension: air/air, loading space width: 960 mm, loading space length: 5,500 mm, Condition: used, Year of construction: 2014, machine/vehicle number: 328334746, Equipment: ABS, Air conditioning, Onboard computer,

year of first registration: 2,001, month of first registration: 9, overall weight: 30,000 kg, axe configuration: 3 axles, maximum load weight: 22,760 kg, empty load weight: 7,240 kg, tire size: 235/75r17,5, suspension: steel, loading space length: 8,750 mm, Condition: used, machine/vehicle number: 135919, Equipment: ABS,

Condition: refurbished (used), Year of construction: 2019, Operating hours: 7,415 h, machine/vehicle number: FN594271, Friedmann Forklifts - Remade for Action Used lift trucks from selected premium manufacturers fully serviced, tested and reconditioned by us according to FEM-4.004 (UVV) specifications. Individual conversions of any kind on customer request possible. International transport with suitable vehicles and customs clearance possible on request. Convince yourself and visit us in our factory. Friedmann Forklifts - Quality promise Full functionality according to FEM-4.004 Maintained & tested (C5-Test) battery for electrical equipment (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments and hydraulic system tested Steering axle tested for safety Forks and lifting chains with a max. wear limit of 40%. Driver's seat and safety belt as good as new New paint in original colors and original stickers Industrial truck data Manufacturer: Jungheinrich Type: Jungheinrich EFG 216 - electric front loader drive type: electric lifting capacity: 1.600 kg lifting height: 6.000 mm load center: 500mm Year of manufacture: 2019 Operating hours: 7,418 Serial No.: FN594271 Mast data/Forks Mast type: Triplex Lifting height: 6.000 mm Fork length: 1,150 mm Dimensions Trjvioh0 Overall height: 2.400 mm Dead weight: 2.463Kg + 870 Kg battery Battery & charger Battery Volt: 48 V Battery year of manufacture: 23/2018 Battery Maintenance: 06/2023 Battery capacity test C5: 84% Battery AH: 625 Charger Volt: 48 V (on request) Attachments & special equipment Attachments: sideshift Optional equipment: free lift, working lights front & rear, bluespot Front tires: solid rubber - (non-marking) Rear tires: Solid rubber - (non-marking)

year of first registration: 2,020, month of first registration: 1, overall weight: 35,000 kg, axe configuration: 3 axles, year of inspection (TÜV): 2,024, month of inspection (TÜV): 1, loading space volume: 84 m³, loading space width: 2,400 mm, loading space length: 13,300 mm, loading space height: 2,500 mm, Condition: used, machine/vehicle number: 039729, Equipment: ABS,

mileage: 14,098 km, power: 77 kW (104.69 PS), year of first registration: 2,022, month of first registration: 1, overall weight: 2,485 kg, fuel type: diesel, color: white, maximum load weight: 840 kg, empty load weight: 1,645 kg, wheelbase: 3,105 mm, gearing type: mechanical, suspension: other, loading space width: 1,714 mm, loading space length: 2,174 mm, loading space height: 1,305 mm, Condition: used, machine/vehicle number: 04409-245A, Equipment: ABS, Air conditioning, Airbag, Central locking, Cruise control, Electronic stability program (ESP), Fog lights, Had accident, Immobilizer system, Onboard computer, Soot filter, Traction control,

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. Bhdwvxp7zg In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

mileage: 144,049 km, power: 235 kW (319.51 PS), year of first registration: 2,014, month of first registration: 11, overall weight: 26,500 kg, fuel type: diesel, color: blue, axe configuration: 6x2, maximum load weight: 11,550 kg, empty load weight: 14,950 kg, tire size: 315/70r22,5, wheelbase: 3,600 mm, gearing type: automatic, emission class: euro6, suspension: air/air, loading space width: 960 mm, loading space length: 5,500 mm, Condition: used, Year of construction: 2014, machine/vehicle number: 524241159, Equipment: ABS, Air conditioning, Onboard computer,

overall weight: 30,000 kg, axe configuration: 3 axles, maximum load weight: 22,540 kg, empty load weight: 7,460 kg, tire size: 235/75 r 17,5, fuel: biodiesel, suspension: steel, loading space length: 9,000 mm, Condition: new, machine/vehicle number: 135562, Equipment: ABS,

mileage: 135,661 km, power: 73 kW (99.25 PS), year of first registration: 2,018, month of first registration: 6, fuel type: diesel, color: white, axe configuration: 4x2, year of inspection (TÜV): 2,025, month of inspection (TÜV): 9, gearing type: mechanical, emission class: euro6, loading space width: 1,225 mm, loading space length: 1,900 mm, loading space height: 1,150 mm, Condition: used, machine/vehicle number: 22823, Equipment: ABS, Air conditioning, Airbag, Central locking, Cruise control, Electronic stability program (ESP), Immobilizer system, Navigation system, Onboard computer, Sliding door, Soot filter,

Condition: new, sheet length: 1360sheet thickness: 3 Standard equipment: - manual back gauge 500 mm - Cutting line lighting - Side stop - 2 sheet metal support arms - Light barrier protection on the back - autom. acting hold-down device (with rubber) Fn7erux - Cutting gap adjustment from the front - movable foot switch For more see here:

mileage: 14,098 km, power: 77 kW (104.69 PS), year of first registration: 2,022, month of first registration: 1, overall weight: 2,485 kg, fuel type: diesel, color: white, maximum load weight: 840 kg, empty load weight: 1,645 kg, wheelbase: 3,105 mm, gearing type: mechanical, suspension: other, loading space width: 1,714 mm, loading space length: 2,174 mm, loading space height: 1,305 mm, Condition: used, machine/vehicle number: 04409-245, Equipment: ABS, Air conditioning, Airbag, Central locking, Cruise control, Electronic stability program (ESP), Fog lights, Had accident, Immobilizer system, Onboard computer, Soot filter, Traction control,

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth By2jzhxi - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: used, Year of construction: 2017, Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customer's needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition there are several measurement devices for temperature, flow rate, filling level and conductivity Tech Specs: Base frame stainless steel Control: can be connected to Allen Bradley control CIP pumpcapacity: 20 m^3/h Tank volume: 500l Number of dosing pumps: four Measurement devices: Temperature Flow rate Filling level Conductivity Features: Suitable for the cleaning of fillers, flash pasteurisers, mixers, syrup rooms as well as piping systems and tanks P&ID can be modified Dosing pumps from Prominent CIP Pump: Hilge Hygia 50/50/5,5/2 7gtq22xaju

overall weight: 24,000 kg, axe configuration: 3 axles, tire size: 235/75 r 17,5, fuel: biodiesel, suspension: air, loading space width: 2,550 mm, loading space length: 10,000 mm, Condition: new, machine/vehicle number: 123722, Equipment: ABS,

Condition: new, sheet length: 1560sheet thickness: 3 Standard equipment: - manual back gauge 500 mm - Cutting line lighting - Side stop Ekd70amq0 - 2 sheet metal support arms - Light barrier protection on the back - autom. acting hold-down device (with rubber) - Cutting gap adjustment from the front - movable foot switch For more see here:

overall weight: 24,000 kg, axe configuration: 3 axles, tire size: 245 / 70 r 17,5, fuel: biodiesel, suspension: air, loading space width: 2,550 mm, loading space length: 10,500 mm, Condition: new, machine/vehicle number: 126557, Equipment: ABS,

Condition: new, sheet length: 2060sheet thickness: 3 Standard equipment: - manual back gauge 500 mm - Cutting line lighting - Side stop - 2 sheet metal support arms - Light barrier protection on the back - autom. acting hold-down device (with rubber) Brzkc0ofm7 - Cutting gap adjustment from the front - movable foot switch For more see here:

overall weight: 24,000 kg, axe configuration: 3 axles, tire size: 245 / 70 r 17,5, suspension: air, loading space width: 2,550 mm, loading space length: 8,600 mm, Condition: new, machine/vehicle number: 126423, Equipment: ABS,

overall weight: 24,000 kg, axe configuration: 3 axles, tire size: 245 / 70 r 17,5, suspension: air, loading space width: 2,550 mm, loading space length: 9,000 mm, Condition: new, machine/vehicle number: 125654, Equipment: ABS,