Used Fitzpatrick Fitzpatrick Model L89 Chilsonator for sale (16,716)

Condition: used, Used Fitzpatrick Chilsonator stainless steel system with Fitzpatrick model M5A comminutor. - Manufacturer: Fitzpatrick - Model: L89 - Material: Product contact parts stainless steel AISI 316 - Feed system: Horizontal and vertical screw. - Roll diameter: 8" - Roll width: 2" - Roll pressure: Air hydraulic booster system (ENERPACK BOOSTER) Duedpfx Apoxd Alnehju Fitzpatrick Fitzmill - Model: M5A - Material: Product contact parts stainless stell AISI 316 - Rotor speed: 1000 - 3000 rpm - Drive: 3 HP Includes: control panel.

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel Dujdpfx Ajw Rdt Ijpheu • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Djdpfx Apjvbdyfshjuu Depth (mm) 735

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Duedoy Tu Rwopfx Aphju Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Dsdoy N Dxcspfx Aphsuu Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: excellent (used), Original Stryker Stair-Pro stair chair, model 6252, designed for the safe transport of patients up and down stairs. Equipped with a track system that significantly reduces the effort required by rescuers and increases control during descent. Robust aluminum construction, high load capacity (approx. 227 kg), complete set of safety belts, and foldable components for ease of transport and storage. The equipment is fully operational, complete, and in very good visual condition – ready for immediate use. Made in the USA. Ideal for EMS teams, fire departments, hospitals, ERs, and nursing homes. Key features: • Model: Stair-Pro 6252 • System: track system (safe stair descent) • Load capacity: up to approx. 227 kg Djdox N Idcspfx Apheuu • Construction: lightweight and durable aluminum frame • Safety: securing belts, stable handles • Condition: used, very good, fully functional • Manufacture: Made in USA

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Duedex N Ic Eepfx Aphsu

Condition: good (used), Fitzpatrick L1A Fitzmill 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame Dujdporxdp Njfx Apheu

Condition: good (used), AFOS Defroster Dedpfex Ey Ufox Aphsuu Model T1000 Defrost Twin Chamber Fully stainless steel Complete with refrigerator unit 400 v / 80 amps

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Dujdpfxew D E Rvs Aphju Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: excellent (used), Year of construction: 2014, Willemin-Macodel SA Model 308B 5 Axis Machining Center Mfd. 2014 X 160 mm Y 120 mm Z 150 mm # Axis 5 Power 7 hp RPM 30,000 RPM # ATC 28 Taper HSK E32 Dsdpey Abcxsfx Aphouu Willemin-Macodel SA Model 308B 5 Axis Machining Center (2014) X1 6.300" Y1 4.720" Z1 5.910" A1 360.000° B1 130.000° Taper HSKE32 Rapid Feeds 1,181ipm Equipped With 5 Axis 28 Position ATC 30000 RPM Pallet Recognition Fire Protection Auto Fire Suppression Filter Mist Extraction

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Dsdpfx Apsh I Euaehouu Refurbished and Ready to Run Several similar machines available

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Duedpfjrtrzdox Apheu Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Dedpfx Aertryksphouu Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Unused GEA Niro type F01A stainless steel rotary atomiser suitable for use with GEA Niro Mobile Minor spray dryer. No atomiser wheel included. Duedpfxszbubks Apheu

Condition: used, Wyremontowany i nieużywany od czasu remontu mieszalnik typu Z produkcji Winkworth model 16Z-63. Wykonanie ze stali kwasoodpornej - części kontaktowe z produktem wykonane ze stali 316/316L. Komora mieszania ma wewnętrzne wymiary: 400 mm x 400 mm x głębokość 350 mm. Pojemność całkowita ok 54 l. Pojemność robocza w zakresie od 36 do 27 l. Komora jest obłożona płaszczem grzewczym ze stali ko (304/304L) przeznaczonym do pracy na ciśnieniu do 3.5 bar i temperaturze do 150 C. Mieszalnik posiada dwa mieszadła typu "Z" napędzane przez przekładnię silnikiem el. 4 kW, 1464/37 obr/min, 3/50 Hz. Mieszalnik jest wyposażony w pokrywę ze stali ko, przeznaczoną do pracy na próżni, zamykaną na klamry. Dedpfsymazajx Aphouu Rozładunek przez mechaniczny przechył komory. W zestawie z maszyną - chiller ICS Cool Energy Ltd model iC220 oraz panel sterowania do mieszalnika i chiller'a.

Condition: used, mileage: 184,684 km, power: 375 kW (509.86 HP), first registration: 10/2021, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, navigation system, parking heater, MAN 18.510 TGS 4x4H BLS Hydrodrive COC available! RADIO / Multimedia NEW * First registration: 06/2021 * Wheelbase: 3,600 mm * Fifth wheel height: 1,320 mm * Technically possible rear axle load: 13,000 kg * Technically possible front axle load: 8,000 kg * Tyres approx. 40% * Refrigerator box * 1 x bunk * Leather/velour seats * Blind spot camera assist * German vehicle Dujdpfx Aoy H Tfasphou Vehicle can be viewed at any time during our opening hours; test drives by appointment only! For export sales, a deposit will be withheld and refunded upon receipt of the certificate of arrival. Company logos or advertising logos on vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typos, and prior sale. Vehicle descriptions are expressly not guaranteed characteristics. We refer to our General Terms and Conditions and ask that you take note of them.

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm Dujdpfx Apjzbqvwshou 12 kW product height: max. ± 120 mm

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm Dedezbqutepfx Aphjuu 14 kW product height: max. ± 120 mm

Condition: new, Fanuc A06B-0854-B300 # 3030 AC Spindle Motor Model ? 6, serial number as per photo, unused, 100% functional, (fan cover missing) Scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dusdpfoi D H N Dex Apheu

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Djdpjymaxlofx Apheuu Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Used Brogli model MH-5 stainless steel vacuum process vessel. - Manufacturer: Brogli - Model: MH-5 Vessel: Dusdpfx Apezbuibjhju - Total capacity of vessel: 6,8 litre - Working capacity of vessel: 5 litre - Vessel rated: -1/0,5 bar - Jacket rated: 1 bar Mixing system "Multi-homo": - (1) anchor agitator with scrappers - (1) ribbon agitator - (1) homogenizer system Includes: - control panel - heating unit - lowering/raising the vessel using a hand-operated wheel Specifications: Vacuum (Y/N): Y Capacity: 5 Material Of Construction: AISI 304 Jacket (Y/N): Y

Condition: used, Used Lödige model FKM1200D stainless steel ploughshare mixer. - Manufacturer: Lödige - Model: FKM1200D/2MZ/2ZF - Material: Stainless steel - Capacity: 360-840 litre working capacity, 1200 litre total capacity (product dependent) - Mixing Chamber: 1700 mm long x 950 mm diameter Dujdpfx Apjzbuhqeheu - Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve - Type Of Blades: Stainless Steel Shaft with Ploughshare Blades - Motor: 25/36 kW, 730/1465 rpm, 380 V electrical motor with gearbox Also Includes: - 2 stainless steel side entry choppers direct driven by 7.5 kW, 2930 rpm, 380 V motors. - Control panel - controls mixing time, start/stop mixing blades, start/stop choppers, open/close inlet valve, open/close outlet valve. Specifications: Bowl Volume: 1,200 L Motor Power: 25 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 2 Vacuum Internal (Y/N): N Jacket (Y/N): N

Condition: used, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Dodpfjzbuhksx Aphsuu

Condition: used, Little used Pharmatech Model BV 400A MultiBlend stainless steel drum blender. Duedpfxozbug Ts Aphju - Manufacturer: Pharmatech (Terriva) UK, - Model: BV 400A - Maximum batch load: 200 kg - Mixing drive: 2.2 kW, 1400 rpm, 50Hz, Ex rated II 3 G EEx nA II T3 / II 3 D EEx tDT