Used Div. Step Machine for sale (66,914)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Steel stairs / Machine steps used Floor height : ca. 515 mm projection : ca. 590 mm total width : ca. 700 mm mesh size : approx. 25 x 25 mm material color : yellow Step dim.: 1x approx. 675 x 250 mm ( upper step ) 1x approx. 475 x 250 mm ( lower steps) Number of steps: 2 pieces / steps inserted step height : approx. 265 mm General information about the article: This item is offered for pickup only. A transport desired beyond that or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Dedjhhxu Hopfx Apdokn Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge Dsdpfx Apjdzp T Njdekn - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: div., Sale of Machines Due to Business Closure Due to the closure of our business, we are selling various like-new machines: 1. Flatlock machines, Yamato, FD-62-01MR (MS7RF) – €2,495 2. Metal detector, SBEC, Model ZD-630D-120mm – Target price: €3,950 3. Label cutting machine, CUTEX, TBC-50SH – Target price: €1,995 4. Linking machine, EXACTA, Classe 602, Gauge 3, Made in Italy – Target price: €995 5. Overlock machines, SIRUBA, 504M5-04/BK with servo motor and pneumatic foot lifter – €600 each (2 units) 6. Gathering machine, Pfaff, 901-3811-026/001, Model 492326, Made in Germany – Target price: €795 We also have approximately 400 garment sewing machines, quilting machines, overlock machines, 2-needle hem stitch machines, various special machines, etc., for sale at favorable prices. If you are interested, please inquire. All prices are ex works (EXW), location: 440157 Satu Mare, Romania. If you have any questions, please do not hesitate to contact us. We look forward to your reply. Sincerely, Dksdpfx Apewqz D Sedsn Otto Simma SIHA Group

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Dkjdpfx Aofifbbepdon Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm Dksdjg Tvmbjpfx Apdsn cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: used, Used Stephan Model UM 60 E high intensity/universal vacuum mixer. - Manufacture: Stephan, Germany, now Proxes group. - Model: UM60 E (electrically top driven screper). - Vessel: Stainless steel vessel total volume 60 litre, working 6-40 litre. Dkedpfx Ajzbug Hepdon - Knife/Drive: S-blade type of agitator driven via dual speed el. motor 5.5/7.5 kW, 1500/3000 rpm, 50 Hz, 400 V.

Condition: good (used), Dividing head, spiral milling attachment, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 Dkjdpfxexfhcho Apden -Dividing head: rotatable/tiltable -Receiver/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Dkodpfx Apjp Duagsdon Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, DGUV certified until: 06/2028, type of input current: three-phase, input frequency: 50 Hz, Baguette - dough divider Dkjdpfsfgvuisx Apden JAC Paniform - Dough weight from 150g to 950g - automatic dough division and shaping - Easyflour enables flour dough to be floured in a single, flowing ergonomic movement - Automatic locking of the grid holder - Modular solution thanks to partial and molded grids - Space saving - fast and efficient - versatile use - 80 different grilles are offered - Up to 3000 dough pieces per hour are divided and shaped Connection 400V 1.5 kW, 16A-CEE plug Demonstration machine with warranty

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Dkjdof Ey Auopfx Apdon Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: new, TC 205 x 1000 Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle Dkedpsir If Djfx Apden - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine shoes (1 set of 6) - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list

Condition: reconditioned (used), Fortuna bun press/dough divider Gr.3, from 35 g to 85 grams. The machine has been overhauled and newly painted. Comes with 3 moulding plates. 4x16 A connection. The machine works perfectly and can be put into operation immediately. If you have any further questions, please contact us. Thank you very much. Dodpfx Apjc Utkajdekn

Condition: new, Year of construction: 2026, Features and applications Base and movable jaw made of high-quality cast iron Replaceable, grooved jaw inserts, inductively hardened and ground Thrust bearing increases the efficiency of the clamping mechanism Intended for mounting long items that take advantage of the whole length of the table Equipment: crank, fixing grooves Dkedovxgq Uopfx Apdsn

Condition: new, Year of construction: 2026, Features and applications Base and movable jaw made of high-quality cast iron Replaceable, grooved jaw inserts, inductively hardened and ground Dkodpfxevxgp Dj Apdjn Thrust bearing increases the efficiency of the clamping mechanism Intended for mounting long items that take advantage of the whole length of the table Equipment: crank, fixing grooves

Condition: refurbished (used), The machine divides the dough into 30 equal pieces and shapes them into round shapes, which results in a high product quality. Dodpfevllnljx Apdjkn

Condition: excellent (used), Trenn-Fix Machine for separating sausages – designed for quick and precise cutting of sausages after cooking or packaging. The device guarantees high efficiency and consistent cutting quality, making it an indispensable piece of equipment for meat processing plants. Technical data: Model: Trenn-Fix Manufacturer: Heinrich GmbH Stuttgart Power supply: 220V, 50Hz Construction: stainless steel – easy to clean and compliant with sanitary standards ✅ Advantages: Fast and accurate separation of sausages – minimizes product damage Compact design – easy integration into the production line Simple operation and maintenance Durable German construction – reliability and long service life Djdpfx Apowtgr Hjdjkn Machine ready for operation – ideal for meat processing plants and sausage manufacturers.

Condition: good (used), functionality: fully functional, machine/vehicle number: 090258095, MONO VS2 BREAD PLANT WITH DIVIDER AND COMBINATION MOULDER. It can divide dough pieces from 250 grams up to a maximum of 1000–1200 grams, and the divided pieces pass through the moulding machine, giving the option for pan-shaped loaves or baguette-style bread. The plant is fully operational. The divider measures 280 cm in length (including the conveyor console) x 103 cm width x 182 cm height. The moulding machine measures 160 cm length x 130 cm width x 180 cm height. MACHINE – Ex Bakery Mono VS2 Plant Moulder Section ELECTRICAL SPEC – 3PH 415V, 0.55kW 0.7amp APPROX MEASUREMENTS – 1800mm H x 2015mm W x 1600mm L APPROX WEIGHT – 250kg Dkedpewxlq Sjfx Apdon MACHINE – Ex Bakery Mono VS2 Plant Divider Section ELECTRICAL SPEC – 3PH 415V, 0.78kW 1amp APPROX MEASUREMENTS – 1800mm H x 1030mm W x 3000mm L APPROX WEIGHT – 500kg

Condition: used, Various spare parts Dksdpfxeyrn Ule Apdsn

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM Dedpfx Apjzb Ipzsdskn 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, Dkjdjzbitujpfx Apdsn spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Dkedpfx Aoq R Tnzepden Spindle taper BT40, 16 station ATC, swarf auger.

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Djdsiit Eropfx Apdskn Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Year of construction: 2012, condition: used, machine/vehicle number: 9620, Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Dksdpszcbpqofx Apden

Condition: used, machine/vehicle number: 4519, Year of construction: 1988, Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Dkedpfx Aozcbnyspdjn

Condition: used, machine/vehicle number: 9268, Year of construction: 2002, Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Djdpfx Aszcbntspdokn