Dishwasher

Mafo Washing Machine 250 S

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 94307025, Container washing machine, efficiency: container/hour 100 to 250, dimensions: Height 1930 mm, width 1280 mm, length of machine + carriage + load: 3000 + 2750 + 450, weight: 860 kg Lomodh87oh

Condition: excellent (used), Year of construction: 2014, Min/Max Grinding Ø1.5/35mm. Maximum Grinding Length While Plunge Grinding 245mm. Grinding Wheel Dimension Ø450 x 250mm Wide. Wheel Bore Ø203.2mm. Regulating Wheel Dimension Ø250 x 250mm Wide. Maximum Wheel Speed 7,200rpm. Dittel Dynamic Balancing Unit. S/No. 15005008 (2014). Lvoeqiluvv

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 106 369-11, Functionality: fully functional, Suitable for deep drilling and milling - Tools and long deep drilling tools can be changed fully automatically TECHNICAL DETAILS drilling diameter: 3 - 65 mm number of spindles: 1 Control: Siemens Sinumerik MACHINE DETAILS Dl79h7 total power requirement: 45 kW weight: 45 t

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2,0 kW weight of the machine ca. 28 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life Ddpk2sv - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 720/51XX, • 4 Spindels • 4 checking mandrels • 1 Brushing station • Stroke length 250 mm • Tool dia Ø 16 mm • Work piece transportation • Year of manufacturing: 2008 • Siemens Step 7 • Gehring Honsteuerung • verry good condition Beicx8ciecp

Condition: good (used), Year of construction: 1961, machine/vehicle number: 116-2, OFFER 19425 Technical data: - groove width 3 to 40 mm - max. slot length max. 250 mm - bore diameter 13 to 300 mm - working speed 17 to 57 strokes/min - table size 500 x 500 mm - working / operating height 1150 mm - drive 400 V / 2,2 kW - Coolant device Bt2duhc2z8 - Space requirement approx. W 1100 x H 1400 x D 900 mm - Weight approx. 950 kg

Condition: reconditioned (used), Year of construction: 2015, S-1-250 brush machine is designed for structuring wood with surfaces flat surfaces. The maximum cross-sectional dimensions of treated elements are 250 x 100 mm (W x H) Equipped with two structuring units. The first one is very strong for steel heads, and the second one is slightly weaker for tynex, abralon cleaning and smoothing heads. - Year of manufacture 2015 - Working width of the belt: 280mm - Effective working width: 250mm Gij7ss - Minimum thickness of the workpiece: 5mm - Maximum workpiece thickness: 100mm - Working level: 930mm - Conveyor belt speed: 0-12.5[m/min]- Motor power of main unit: 7.5kW - Engine power of cleaning unit: 4kW - Power of conveyor motor : 2,2 - Supply voltage: 400 + PE (50Hz)kW - Machine dimensions (without working tables): 2625 x 1325 x 1805(h)mm - Weight of the machine: 920kg

Condition: as good as new (ex-display), Year of construction: 2023, The spray cleaning system "RH S" is a compact, space-saving, automatically operating cleaning system, which meets high demands regarding cleaning/degreasing and drying results. The cleaning of the components can be carried out with the basket standing, swiveling/oscillating and rotating. The nozzle system - several nozzle sticks on the longitudinal and front sides - are permanently mounted in the working chamber. Basket dimensions: LxWxH 470x3200x200(h) mm 2 baskets can be washed in parallel (simultaneously) max. loading weight: 100 kg Spray pressure (washing): 4 bar, circulation capacity: 360 lit./min. control: Siemens S7-1200 with touch panel KTP700 Dx3ohe including hot air drying (12 kW) including compressed air impulse blowing including steam vapor extraction including stainless steel outer cladding including preparation for retrofitting of an oil separator including bag filter for medium maintenance including 2 pcs. stainless steel baskets 470x320x200h mm dimensions of the unit: LxWxH 1.425x1.920x1980(h) mm Dimensions including opened loading door Connected load (electrical): approx. 25 kW

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Scqw7 Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, plate thickness 1,20 mm throat 270 (145) mm distance between roll centers 62,0 mm total power requirement manuell kW weight of the machine ca. 50 kg dimensions of the machine ca. 600 x 280 x 500 mm Ciqvqjch3i Furnishing: - various replacement rollers - hand crank - front stop

Condition: new, semi-automatic chamfering machine development and production in England - automatic chuck with material sensor - automatic spindle start when cutting head moves - max. speed 1.500 rpm - max. bar diameter 80 mm 39maxvly - bar support adjustable - max. chamfering / turning length 37 mm - incl. turning and chamfering tool - precision three-jaw chuck - large chip catcher for easy cleaning - easy to move with lift truck - weight 500 kg dimension L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - oil cooling (mist) € 1.850,- - adjustable fence + universal chamfering tool € 1.650,-

Condition: as good as new (ex-display), Year of construction: 2022, - DEMO machine from our technicial center for special price! - Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Bhlwuajs3a Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, Year of construction: 2021, The Ceetec A250 machine is the middle machine of the painter series and is particularly suitable for larger craft companies, such as painters, carpenters, woodworkers as well as factories with some or larger production. L87nk0a2 The machine is mostly used as a manual machine, i.e. manual feeding and removal. If insertion into a production line is required, our Ceetec Industry series is recommended. The machine is delivered complete with brushes and filter bags and is ready for use as soon as the power is connected. Ceetec A250 is a standard machine and therefore also a stock item, which can normally be delivered from day to day. Technical data: Capacity: 18 - 42 meters/min Embossing dimensions: 250mm*250 mm (option 380mm)

Condition: new, Manual chamfering machine Development and production in England - variable adjustment of spindle speed - max. bar diameter 80 mm - bar support adjustable - max. chamfering / turning length 37 mm - incl. turning and chamfering tool - precision three-jaw chuck - large chip catcher for easy cleaning - easy to move with lift truck O8daoyks9 - weight 500 kg dimension L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.650,-

Condition: used, Notching machine, notcher Bikytxhn2a8 Manufacturer: Euromac Type: T250/6.S Cutting-width: 250mm Max. thickness: 6mm Table-size: 800x900mm Motor-power: 3kW Machine-dimensions: 900x800x1500mm Machine-weight: 450kg

overall weight: 13,200 kg, injection weight: 1,286 g, displacement volume: 1,407 cm³, Condition: excellent (used), Year of construction: 2004, Operating hours: 32,400 h, Manufacturer: Arburg Type: 630S 2500-2100 Control Selogica Year of construction: 2004 Operating hours: approx. 32,400 h Special features/extras: - Master computer interface - Valve gate valve - 2 x blow-off valve - 2 x hydraulic core pull - 9 x electrical heating control circuits - 4 programmable inputs/outputs - Quality switch - Robot interface Closing side: Closing force: 2500 kN/ 250 tons Beam dimensions H X V 630 x 630 mm Panel size hxv: 900 x 900 mm Installation height min: 700 mm (300-700 var.) Mssua0uow Panel spacing max.: 1300 mm (900-1300 var.) Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 90 kN Injection side Screw diameter 80 mm Stroke volume 1407 ccm Injection weight: 1286 gr./hp Injection pressure: 1530 bar Cylinder heating capacity: 31.4 KW max /8 zones Pump output: 45 KW max. Connected load: 175 Ampere Oil filling: 460 ltr. Dimensions - Weight in mtr. Length: 7,20 Depth: 2.08 Height: 2.21 Weight: 13,200 kg. - available in our warehouse in Hanover from 1/2024 free loaded or free delivery against freight reimbursement - Function-tested (guaranteed function until first commissioning) -Free loading on the buyer's truck or free delivery against freight reimbursement Machine can be inspected under power

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 31900 € 647.57 € 2530 mm 6 mm 6 mm 4 mm 190 mm 5.5 kW 4250 mm 1200 mm 1150 mm 3750 kg Bwwvvkfajq 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: used, Year of construction: 1981, Year of manufacture 1981 Cmef2pxlik Function tested Center distance 1500 cm Turning diameter over bed 500mm 400 Volt 1.5 kW motor 4 speeds 670 / 970 / 1580 / 2800 rpm External thread M33 Internal thread M16 Tailstock cone MK2 Quill stroke 120 mm Copying length max. 1000 mm Copy length diameter max. 250 mm Dimensions 2600 x 800 x 1200 mm Weight: 380 kg Incl. 4 jaw chucks / drill chucks, four-point driver, chuck, 4 hand rests, various clamping disks, etc. Clamping disks etc. Price: 3300 € - VAT cannot be shown / differential taxed

Condition: good (used), Year of construction: 1999, Polyglass LV2501/R Bd92dwkhcv Year: 1999 Height: 2500mm

Condition: excellent (used), Year of construction: 2005, Capacity: 1,000 liters Heating power: 52 kW Cooling capacity: 9.9 kW Ultrasonic device rated power: 3 kW B2rvwydxic basket sizes: 520 x 350 x 200mm (L x W x H) 520 x 720 x 180 mm (W x L x H) Detergent: Per Equipment: various charge baskets

Condition: new, Year of construction: 2023, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Ri7k7

Condition: new, Year of construction: 2023, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200R band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. Cj0sq8mr29 The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - manual Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2023, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 Ogedh 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Condition: good (used), Year of construction: 1997, Functionality: fully functional, For tempering glass sheets TECHNICAL DETAILS pane size: min. 100 x 280 mm wheel size: max. 4200 x 2250 mm slice thickness: 3 - 19 mm Glass quality (building): DIN 1249-12 Glass quality (vehicles): ECE R43 Loading capacity: 9,5 sqm Ventilation: 2 x fans for pre-charging + 1 x after-cooling fan Csukawkzs8 MACHINE DETAILS power: 1936 kW supply voltage: 3 phases, 400 V, 50 Hz Weight: 54,2 t EQUIPMENT all documents from the instruction manual to the electrical circuit diagrams

Condition: refurbished (used), Year of construction: 2004, S&F Screening Machine | Oscillating Screen Type ASM-800 completely reconditioned with a new screening box - Make: S&F GmbH - Type: ASM-800 - Year of construction: 2004 - Condition: completely reconditioned - Screening capacity: approx. 120 m³/h (for wood chips and sawdust) - Screen area: 8.0 m² per screen size - Fractions: 3 or 4 - Screen decks: 3 pieces - Drive power: 7.5 kW - L x W x H: 6,500 x 3,060 x 2,650 mm - Machine weight: approx. 7,500 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Infeed and outfeed configurations according to customer requirements Nps0gsv0 Screening machine completely reconditioned with a new screening box. The oscillating screen has new bearings (spherical roller bearings) and universal joints have been completely overhauled. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2022, ANB-5E Punch tool grinding machine Bdvxk8zx Here we have for sale, brand new, fully-automatic Punch Tool Grinder. The customer bought it in 2022 but never used. Comes with the extra grinding tools seen in a last photo. Comes without original box. The machine have some marks, scratches. Please see al photos. Description: Tool Grinder ANB-5E -Tool Grinder ANB-E is used for sharpening and grinding of the punching tools and dies of TRUMPF, AMADA, FINN-POWER sheet metal processing machines. -The tool grinder is suitable for companies active in sheet metal processing, which has punching machines and do not have their own tool shop with grinders. Thanks to high accuracy of grinding, it is possible to extend tool lifespan up to two times of standard lifespan, provided that tools are sharpened as soon as signs of blunting appear. -Made in Europe Advantages of the Punch Tool Grinder: -Simple operation -Grinding accuracy in tolerance of 0,01 mm -Tool lifespan extension -High quality of grinded surface -Low operation cost -Small dimensions -Reduction of operator time Technical Description: Grinding of the tools is made by special abrasive disc with internal cooling. Cooling liquid prevents overheat of grinded tools, removes mechanical elements rising from the grinding and increases quality of grinded surfaces. Complete set of fixing tools for all standard punching tools and dies is provided with machine.For all types of punching tools it is possible to grind scarf from 0-8 degrees. Machine Operation: The tool grinder ANB-5E was designed as fully-automatic machine, where the operator is responsible for the right insertion of the tools, selecting the depth of grinding and pressing the green button. The ANB-5E takes care of the rest. Process of sharpening is fully controlled by the machine and it is performed in several repeating cycles of grinding according to material removal set-up. At the end of the grinding process is the tool moved of the abrasive disc and machine is ready for new grinding. Any questions, welcome.

Condition: new, Year of construction: 2023, Process: Rectification And Residual Stress Relieve Material Thickness (mm): 0- 3.5 Maximum Material Width (mm): 1300 Minimum Material Length (mm): 70 Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Electromechanics/PC Control Overload Protection: Standard Screen: Touch Rflfn7jj CE-Certificate: Standard Machine Size (mm):2685x1585x1820 Total Weight (kg):14000

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hxkh8282

Condition: new, Year of construction: 2023, As Turkey's leading manufacturer of sand screening and washing plants, we offer you quality service with wheel (bucket) washer systems. H0nreae88 The wheel (bucket) washer we produce for many countries of the world have the best equipment and design. We are always the solution partner of those who are looking for a wheel (bucket) washer for sale. In addition, our company helps you with concrete plant equipment and produces fast results for you with its wide product range. The products we mainly produce are; concrete batching plant, cement silo, stone crushing and screening plant, mobile concrete batching plant, concrete block making machine, concrete mixers and all mobile stone crushing machines and parts. Bucket Wheel Sand Washing Machine Technical Specifications Motor Power (kW): 5,5 Capacity (m³/h): 80 – 90 Bucket Size (mm): 800 x 550 Wheel Speed (rpm): 2,5 Wheel Diameter (mm): ?3.000 Number of Buckets: 40

Condition: ready for operation (used), Year of construction: 2000, P+S Mako Rianta 84-CSs/2000 Dmp3a9 Bread slicing and packaging machine

Condition: new, automatic chamfering and starting machine development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic shutdown at repeatable chamfering lengths - color touch screen control panel - max. spindle speed 3.000 rpm - bar diameter 8-80 mm - hydraulic 3-jaw chuck - cutting head suitable for all material sizes - fast exchangeable ISO cutting inserts - max. chamfering / turning length 37 mm - incl. turning and chamfering tool - 4 kW motor - high precision Mitsubishi servo drive - Ball screw drive with high thrust - large machine door - internal powerful LED work light - Spit collector with external spit basket - Lifting points for pallet truck - weight 500 kg - dimension L/W/H 1000x600x1200 mm CE - certified OPTIONS - oiling (oil mist): € 2.500,- - universal chamfering head: € 990,- - 8kW motor for hard materials: € 3.850,- Tti2tlkvl

Condition: used, Year of construction: 2007, 1. PET-flakes washing and separating line - Main units: • Cold water washing tank, • Flotating tank, • Hot Washer (NaOH), • Flotating tanks (to separate label and cap), • Mechanical dryers, • Zig-Zag Air separator (to separate light fraction) (TBS RV-600), • Conveyor dryer, • Optical sorter (2in1 color-sorter and metal detector) (S+S Purifier CM 1024) • Electrostatic separator (to separate PVC-flakes), Qpqntjgq • Big-bag station.

Condition: excellent (used), Deckel S11 in excellent working condition and 2 cabinets with lots of accessories C0xdd8d8

Condition: refurbished (used), Year of construction: 2011, Screening Machine | Oscillating Screen Type ASM-300 reconditioned - Make: S&F GmbH - Type: ASM-300 - Screening capacity: approx. 35 - 40 m³/h (for wood chips and sawdust) - Screening area: 3.0 m² - Fractions: 4 pieces - Screen decks: 3 pieces - Drive power: 2.2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 6018 Yellow green - Screening inserts and material outfeeds freely selectable Suitable for the screening of the following bulk materials, among others: - Wood chips - Sawdust and sawdust Bd8tybcg2fc - biomass - wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: new, Year of construction: 2023, New filling machine / filling machine which can be used for filling liquids. At this point you could think of: Milk Crv2alb3pl Water Alcohol Disinfection Etc. Very solid machine that works on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if required. For this we recommend at least a 12L version. The filling machine has a 2500ml cylinder so that it can fill up to 2500ml per stroke. At least this is 250ml. By having the machine give several strokes, a multiple of this is also fine. Similarly 5000ml by giving 2 x 2500ml. The smallest stroke is 250ml, everything between 250 and 2500ml can be removed in 1 stroke. We also have a model that can fill up to 5000ml per stroke. Equipped with a suction hose so that the machine sucks directly from the drum or the IBC. The machine is equipped with a foot pedal and auto position. In the auto mode, the machine continues to fill continuously and any larger quantities can be filled quickly and easily. With the foot pedal you can fill at your own pace. Depending on the operator and the number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs about 15/20 kg and can easily be placed on a table. Entirely made of stainless steel, a very high-quality machine. If you have any questions, please email us, we will be happy to help you with this or another machine. We also have a labeling machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to be there for you.

Condition: ready for operation (used), Year of construction: 1995, There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. D8jn7d9

Condition: new, Manual chamfering machine Development and production in England - variable adjustment of spindle speed - max. bar diameter 26-105 mm Bsbc0xk7ts for smaller Ø a 2nd cutting head is necessary - bar support adjustable - max. chamfering / turning length 45 mm - overturning & chamfering tool - precision three-jaw chuck - large chip catcher for easy cleaning - easy to move with lift truck - weight approx. 500 kg dimension L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.650,-

Condition: new, Year of construction: 2021, The Ceetec P40 is the smallest machine in the range and is particularly suitable for smaller hand workshops, such as painters, carpenters, joiners and woodworkers. The machine's simple design makes it very easy to operate. The machine is on rubber wheels and can therefore be moved without difficulty. It is therefore also suitable for construction sites. The machine comes complete with brushes and filter bags and is ready for use as soon as the power is connected. Ceetec P40 is a standard machine and therefore also a stock item that can be delivered from day to day. Technical data: Capacity: 1500 meters/hour Embossing dimensions: Max. H*W: 25*175 mm or 40*100 mm Min. L: 800 mm Jxkgiq

Condition: new, Year of construction: 2021, Operating hours: 0 h, Since 1970 Ceetec A/S produces innovative wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our CNC linear spraying machine is equipped with 3-4 traverses which are controlled by the easy to use touchscreen. We can offer it with 1-2 paint circles for easy color management. Further specification: - painting dimensions: 100 x 400mm (heigth x width) - speed: 10 - 200m/min - capacitiy: up to nearly 12.000 running meter per hour - power connection: 400VAC (other system on request) - air connection: 8bar air pressure - made for painting 5 sides, 6 sides painting optinal possible Bhlxt3xm2l It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, semi-automatic chamfering machine development and production in England - automatic chuck with material sensor - automatic spindle start when cutting head moves - bar diameter 26-105 mm for smaller Ø a 2nd cutting head is necessary - bar support adjustable - max. chamfering / turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck - large chip catcher for easy cleaning Etbpgsy88 - easy to move with lift truck - weight approx. 500 kg dimension L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.650,-

Condition: new, Year of construction: 2021, Operating hours: 0 h, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. Coiw7lou According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative Technology where it makes sense for our customer. Are surface spraying machine is equipped with No. 2 traverses and can paint material up to 200mm high and 1.800mm wide (standard is 100mm x 1.300mm). We can offer it with 1-2 paint circles for easy color management. It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, bore capacity in steel (diameter) 30,0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 514 x 360 mm turning speeds 225 - 4.300 U/min engine output 1,0 / 1,6 kW column diameter 115 mm weight 260 kg Machine height 1.790 mm Beobzzhwql Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Condition: excellent (used), Year of construction: 2005, ARBURG A 370 C (S&P 3714) ARBURG A 370 C 1000-250 MULTILIFT H (Trennebene) Year: 2005 Operating hours: 21.000 h Screw: 35 mm Injection pressure: 1820 bar Injection volume: 144 ccm Rs38jer3 Clamping force: 100 t Tiebare distance: 370 x 370 mm Mouldheight: 350 mm Daylight max.: 850 mm Size: 4300 x 1600 x 1900 mm Weight: 3200 kg Price: € 28.900,00 contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2014, The machine is in good technical condition, after prior agreement there is a possibility of testing. Ly8ffm2ayp

Condition: good (used), Please see technical details on photo. Tgclwvmp

Condition: new, Year of construction: 2022, 0600 mm 300 mm Emmpy8 342 mm 700x340 mm 355x38x127 mm

Condition: new, bore capacity in steel (diameter) 23,0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4.300 U/min engine output 0,6/0,95 kW column diameter 90 mm weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse Ciqpghfbpc - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Condition: new, Year of construction: 2023, 0800 mm 400 mm 342 mm 900x460 mm 355x38x127 mm Chxtlrjsqw 2400 U/min

Condition: new, Year of construction: 2023, 0600 mm 300 mm 342 mm 700x340 mm 355x38x127 mm Cbsmrt0lre

Condition: new, Year of construction: 2023, 0500 mm Zqfqajut 250 mm 242 mm 600x280 mm 355x25x127 mm 2400 U/min