Used Bomar Pulldown 160.120 G for sale (36)

Condition: used, Year of construction: 2012, cutting diameter 250 mm saw band length 2910 mm cutting width 0,9 mm Czf8Cd2Wd8 capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 290 x 230 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 x 190 mm capacity 45 degrees: flat 220 x 80 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: flat 120 x 80 mm cutting speed 40 / 80 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 760 mm length of rest piece min/max 80 mm feed length 500 mm feed length: multiple programmierbar total power requirement 3,9 kVA weight of the machine ca. 460 kg dimensions of machine L x W x H 1,60 x 1,45 x 1,35 m Accessories: coolant

Condition: good (used), Year of construction: 2008, - Semi-automatic - Hydraulic - 2 speeds - Installation is automatic - Double miter - Hydraulically adjustable cutting pressure - Koling - Emergency stop Cnz3E2Xdo3 - Documentation - 400V

Condition: used, Cutting capacity round 258 mm Cutting capacity square 250 mm Mitre Double-sided Band saw 2910x27x0.9 mm Speed 20-120 m/min Power 1.5 kW Cutting capacity rectangular 320x200 mm Saw capacity round 45 degrees 210 mm Czsud723Mg Cutting capacity squared 45 degrees 195 mm Cutting capacity rectangular 45 degrees 210x180 mm Sawing capacity circular 60 degrees 135 mm Sawing capacity 60 degree square 110 mm Sawing capacity rectangular 60 degrees 135x100 mm Sawing capacity round 45 degrees left 185 mm Sawing capacity squared 45 degrees left 195x100 mm Sawing capacity rectangle 45 degrees left 170 mm

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Saw blade diameter: 600 mm, Double miter aluminum circular saw in semi-automatic version Cutting range at 90°= Ø 210 mm Mitre range 90° -45° R/L -60° left Cutting range at 90° : Ø 210 mm Rectangle 455 x 125 mm Czwlkuf7Ug Cutting range at 45° : Rectangle 215 x 50 mm Square 155 x 155 mm Drive 5.5 kW-400 V/50 H Saw blade speed 50 m/s Saw blade dimensions Ø 600 x 30 x 4.0 mm Dimensions 1600x1050x1650 mm Table height 1011 mm Weight 620 kg incl. horizontal clamping vices

Condition: ready for operation (used), Year of construction: 2018, Year of construction 2018 including infeed/outfeed 5m each and 2 used saw bands. Good general condition With invoice VAT showable. Complete operating instructions in PDF available Product information "BOMAR ERGONOMIC 340.278 DG" Manual mitre bandsaw with automatic saw frame lowering for miters left up to 45° and right up to 30 Cutting range at 90°: - around 275 mm - flat 340 x 275 mm Drive power 1.5 kW Rxd2Qpnqjf Cutting speed frequency-controlled 20-120 m/min Saw blade dimensions 3125x27x0.9 mm

Condition: good (used), The saw is under power and can be inspected. Dppm77

Condition: used, Year of construction: 1998, The semi-automatic STG 440 DGH double mitre bandsaw is characterized by its excellent cutting accuracy and its large cutting range. The saw frame can be rotated 60° to the left and right, allowing mitre cuts from -30° to +30°. Basic equipment: - Sturdy welded construction of the saw arm enables a low-vibration saw cut. - Clear, freely positionable control panel - Powerful saw blade drive, variable blade speed via variator 20 - 90 m/min - Hydraulically controlled lowering speed of the saw frame - Hydraulic clamping of the material via full stroke clamping cylinder - Simple adjustment of the saw for mitre cuts by manually turning the saw frame; the set angle is displayed on a scale - Hydraulic cutting pressure regulation - Manual saw blade tensioning - Electrical band tension monitoring with saw band breakage control - carbide saw blade guides and guide rollers - Sturdy base frame with coolant tray and coolant pump - coolant pump with dual feed to the saw blade guides - chip brush - Bi-metal band saw blade M 42 Technical data: - Drive power 3 KW / 400 V / 50 Hz - Belt speed 20 - 90 m/min. (infinitely variable) - Saw band 5200 x 34 x 1.1 mm - Dimensions 2700 x 850 x 1550 mm - Weight 1003 kg Cljqyu7Cac

Condition: used, - Hydraulic bundle tensioning device - Connecting part feed side ATX-L 550 - Roller conveyor 3 m basic version X 550 - Roller conveyor 2 m connection version X 550 - Roller conveyor 3 m basic version X 550 - 4kW drive motor - Infinitely variable cutting speed from 20-120m.min - Pliers feed 2500mm - Saw blade: 6020 x 41 x1.3 mm Year of construction 2013 Operating voltage: 3 phases 400 V 50 Hz TN-C-S Connected load: 10.5 kVA Operating instructions available Dpfq8V Dimensions: 2890 x 4020 x 2031 mm Weight approx. 2700

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, Travel distance X-axis: 6,000 mm, Travel distance Y-axis: 300 mm, Travel distance Z-axis: 300 mm, Spindle speed (max.): 3,000 rpm, Total height: 2,750 mm, Total length: 7,150 mm, Total width: 1,903 mm, Tool mount: 3 mm, Bomar drilling rig Mounting MK3 6000x300 mm Max 28 mm drill Threaded shank M16 Weight 2800 KG Year of construction 2016 Cd89Hxqpzu

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, For sale fully automatic band saw with feeder Elgo. BOMAR Transverse 510.330 GANC Dpl7Lt Hydraulically controlled, cooling system, material feeder

Condition: new, Saw band length: 3,800 mm, Saw band width: 27 mm, BOMAR 410.280 DGH BANDSAW / BAND SAW Designed for double-sided mitre cuts and for cutting material up to 280 mm in diameter, this semi-automatic bandsaw offers high quality at an affordable price. Its excellent cutting performance comes from these features: a carbide belt precision guide, an arm joint set in slide bearings, a 27 mm high saw band and a synchronous brush for chip removal. Dpf8Cv Material clamping and downward movement of the arm are hydraulically controlled, material feed is manually controlled. With the push of the start button, the entire work cycle is completed: the material is clamped, the saw band starts, cutting is performed, the arm is raised to the standard position and the clamp is opened. - Fully hydraulically controlled (saw feeding, lifting, clamping) - Raises automatically after sawing and opens the clamp - Pivot point is under the saw table. - Automatic saw frame height adjustment. - Driven chip brush - Equipped with automatic saw pressure control, depending on the material - Continuously adjustable cutting speed 20/120 mtr./min. (digitally readable) - Adjustable carbide cutting guides Bgfzofvitvt - Heavy duty drive motors - Also available with digital angle readout Cutting capacity: 0 degrees 280 mm 410x280 mm 280 mm 45 degrees R 280 mm 310x150 mm 270 mm 45 degrees L 280 mm 330x100 mm 280 mm 30 degrees R 220 mm 225x100 mm 210 mm 30 degrees L 220 mm 225x100 mm 210 mm Drive motor 2.2 kW Dimensions 2300x1100x1200 mm Noise level 76 dB Weight 530 Kg Material height 760 mm Saw blade dimensions 3800x27x0.9 mm Cutting width 0.90 mm Cutting height 27 mm Cutting speed 20 - 120 mtr/min continuously variable Price on request Also on stock / also on stock: BOMAR WORKLINE 510.350 DGH - BOMAR WORKLINE 610.450 DGH

Condition: ready for operation (used), Year of construction: 2012, Used Bomar fully automatic band saw Type Proline 320 280 A Wlus0Sdu Capacity 320 x 280 mm Built in 2012 Including z.g.a.n. roller conveyor type X, L=3 meter Machine has recently had major maintenance

Condition: excellent (used), Saw blade dimension 4910x34x1.1 mm Cutting speed 20-120 m/min. Feed length single stroke 750 mm Max. Feed length 9999 mm Electrical equipment Supply voltage ~3x400V,50Hz,TN-C-S/TN-C Total connected load 8.5 kW Max. Fuse rating 25 A Protection class IP 54 Sound pressure level Production 280 78 dB Drive unit Type MDERAXX 100-32J B14 Supply voltage ~3x400V,50Hz Ezg8Z09Kf Power 3 kW Nominal motor speed 1420 m/min. Hydraulic unit Type 92.001.048 (731-0507) Power 6.5 MPa/2.2 kW Coolant device Type 3COA4-12 Volume of coolant 40 dm3 MICRONISER possible Machine size LxWxH 2370x1600x2050 mm Machine weight Weight 1800 kg

Condition: used, Year of construction: 2008, cutting diameter 345 mm dimensions of saw-band 4780 x 32(34) x 1,1 mm cutting width s. Abbildung mm Blijw3V0Qtd coolant pump Typ 2C0P1-14H coolant capacity 50 dm³ output 2,6 angle adjustable from - to -45 bis +60 Grad weight of the machine ca. 630 kg dimensions ca. 2400 x 845 x 1430 mm

Year of construction: 2015, Condition: not inspected (used), Machine/vehicle number: F00112, 6500 mm jaw feed Remaining piece flap strip deviation control Micronizer SLE 600 Extension version M330 3M Vertical roller VR-M Remaining piece remover DSTV interface H8Mnl8F

Condition: good (used), Year of construction: 2013, Column-guided hydraulic year 2013 saws Ø 460MM just above vice opens 620MM Cvbnuepr well maintained Hydraulic 2 columns production year 2013 in good condition

Condition: good (used), Year of construction: 2016, Operating hours: 1,600 h, Functionality: fully functional, Saw blade diameter: 500 mm, Cutting range round at 90°: 165 mm, Overall weight: 540 kg, Fully automatic aluminum crosscut saw Used BOMAR AL 500 ANC BJ 2016 (zgan) A fully automatic circular saw designed for cutting profiles and complete materials from aluminum alloys, copper and hard plastics at 90°. The saw feed is controlled pneumatically-hydraulically. The cutting height of the saw blade is set from the main control panel. The saw can be easily connected to an extraction device. The machine is equipped with mist lubrication. The machine is equipped with fixed and movable clamps, their positions are controlled by a ball screw. The length of an individual stroke is 500 mm. The feed length is set from the main control panel at the front of the machine. Main features Cutting in automatic mode at an angle of 90° Adjustment of the length of cut pieces directly from the control panel Up-to-date operation with graphic touch screen display Micronizer system for lubrication with oil mist Cutting capacity: round 165 mm - rectangular 325x70 mm / 130x260 mm - square 130 mm Working mode: automatic Machine type: Circular saw Cut: Straight cut Miter cutting range: 0° Drive: 4 kW, 3x400 V/50 Hz Air pressure: 0,4 - 0,6bar Saw blade speed: 3000 m/min. Saw blade dimensions: Ø 500 x 32 x 4.1 Material loading height: 1100 mm Shortest residual length: 90 mm Smallest saw diameter: Ø 10 mm Gxcboxa Machine dimensions Length: 1 110 mm Width: 2 080 mm Height: 1 622 mm Weight: 540 kg

Condition: good (used), Used 6-meter outrigger conveyor (outrigger + roller conveyor) Brand: Bomar P2Xtthkuvn Type: M NCA Net length: 6 meter Year of construction: 2013

Condition: excellent (used), bomar fully automatic band saw machine mist lubrication and cooling Bnqome7Diag up to 45 degrees mitre max saw diameter 220 max saw size rectangle 280x200 max saw size square 220x220 max feed length 1500 (clamp can overpack up to 3x) 2 sawing speeds.

Condition: used, Bandsaw Bomar 450SL. In good condition, documentation included. Can be tested in Kaunas. Cuh2D0Cdmo Specification: Model. Bomar 450 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450.

Year of construction: 2013, Condition: good (used), Technical data: Two-column design Miter range: infinitely variable 60° left to 60° right Cutting diameter round steel 90°: max. 460 mm Cutting diameter square steel 90°: max. 620 x 460 mm Cutting diameter round steel 45° right: max. 420 mm Cutting diameter square steel 45° right: max. 420 x 400 mm Cutting diameter round steel 45° left: max. 420 mm Cutting diameter square steel 45° left: max. 440 x 300 mm Cutting diameter round steel 60° right: max. 275 mm Cutting diameter square steel 60° right: max. 280 x 390 mm Cutting diameter round steel 60° left: max. 300 mm Cutting diameter square steel 60° left: max. 300 x 460 mm hydraulic full stroke vice infinitely variable saw blade speed automatic cutting pressure regulation mobile control panel with digital display saw band length: 6100 x 41 x 1,3 mm cutting speed: 20 - 120 m / min. working height: 770 mm engine power: 4,0 kW Dimensions (length x width x height ): approx. 3100 x 1900 x 2400 mm Dfktbeownd Weight: approx. 1.950 kg The seller is not responsible for writing or data transmission errors. The machine is new, unused and sold with a warranty.

Condition: good (used), Electronic length stop BOMAR type ROLBO Useful length: 3000 mm Useful table width: 330 mm tAdjustable heigth from 500 mm to 1100 mm 82Fqlpqm Total table length: 3450 mm 8 memory lengths possible Voltage: 220 V mono

Condition: ready for operation (used), Year of construction: 2007, Saw band width: 34 mm, Total height: 17,850 mm, Total length: 23,350 mm, Total width: 17,750 mm, Cutting speed: 120 mm/min, Cutting capacity: 510 mm, Cutting range round at 90°: 330 mm, Working height: 764 mm, Power: 3 kW (4.08 HP), Saw blade length: 4,780 mm, Net weight: 1,550 kg, BOMAR 510.330 GANC Saw cap: 510x330 mm - diam 330 mm / 45 degrees 400x100 - diam 330 mm Fully automatic band saw Powerful NC-controlled automatic sawing machine for mitre cutting with high accuracy when cutting solid materials, tubes and profiles. - Fully hydraulically controlled (clamping, lowering, lifting) - Automatic cutting pressure control, depending on the material - Digital angle readout - Stable saw frame - Adjustable carbide cutting guide - Infinitely adjustable speed 20-120 mtr/min. - Automatic saw frame height adjustment from the display - Double acting fixed and transport clamps (ideal for non-straight materials) - Clamping jaws are equipped with hardened insert strips - Machine is equipped with rollers in the machine bed - Equipped with hardened conveyor axes with ball bearing guides - Length measurement by magnetic tape, very accurate - Transport clamp has a stroke of 600mm - Entry of 20 different lengths and numbers by touch key - Saw blade length 4780x34x1.1mm Easl0Jt Option: - Hydraulic clamp pressure control - Hydraulic bundle tensioner - Clamping conveyor - Cutting progression control system - Laserliner - Spray lubrication system

Condition: good (used), Used bandsaw from Bomar Type: Transverse 410 260 DGH Double miter Pcxspfzfxd Self-sinking with hydraulic pressure Fog lubrication Year of construction: 2005 Digital corner reading

Condition: good (used), Year of construction: 2008, Automatic Band Saw BOMAR Maxi diameter: Ø 250 mm Hydraulic clamping of the chuck Straight and angular cut Cocwnywazt Automatic descent Possibility to work manually or auto 2 rotation speeds of the blade Lubricant pump Voltage: 380 V Length: 2000 mm Depth: 1800 mm Total height: 1800 mm Weight: approx 1,5 T