Glass bar saw
Glass bar saw
Type of offer
Used
MACHINE DATA
- Machine type:
- Glass bar saw
- Condition:
- good (used)
PRICE AND LOCATION
LISTING DETAILS
- Listing ID:
- A891-732
- Update:
- 06.05.2022
DESCRIPTION
1 piece glass Strip saw unit
Engine: 2,2KW (3PS),220V triangle, Star 380V, 50 Hz)
9ly0u
V-belt drive: 6000 1/min.
Tool holder: d30 mm
Dust nozzle: d80 mm
Screw-on flange
Other components can be delivered to
(E.g. cross support system and at the request of the Assembly of the components).
The advertisement was translated automatically. Translation errors are possible.
Engine: 2,2KW (3PS),220V triangle, Star 380V, 50 Hz)
9ly0u
V-belt drive: 6000 1/min.
Tool holder: d30 mm
Dust nozzle: d80 mm
Screw-on flange
Other components can be delivered to
(E.g. cross support system and at the request of the Assembly of the components).
The advertisement was translated automatically. Translation errors are possible.
SELLER
Mitec-Holzbearbeitungsmaschinen
Contact person: Herr H.- E. Michalski
Hovenweg 23
47608 Geldern, Germany
Maschinen-und Werkzeughandel
Elektrotechnik und Maschinenbau
- Automation
- Steuerungssysteme
- Schaltschrankbau ( Schaltschränke aufbauen und verdrahten )
- Positioniersteuerungen
- Längenanschläge
- Maschinenumbau / Maschinenerweiterung
- Ausrichtarbeiten
- Ersatzteile für Schröder-Maschinen
- Ersatzteile für Michalski-Maschinen
- Ersatzteile für PMA-Maschinen
- Ersatzteile aller Art
- Elektrohandel
Unser Service: Maschinen und technische Anlagen betriebsbereit halten.
Elektrotechnik und Maschinenbau
- Automation
- Steuerungssysteme
- Schaltschrankbau ( Schaltschränke aufbauen und verdrahten )
- Positioniersteuerungen
- Längenanschläge
- Maschinenumbau / Maschinenerweiterung
- Ausrichtarbeiten
- Ersatzteile für Schröder-Maschinen
- Ersatzteile für Michalski-Maschinen
- Ersatzteile für PMA-Maschinen
- Ersatzteile aller Art
- Elektrohandel
Unser Service: Maschinen und technische Anlagen betriebsbereit halten.
Send inquiry
TELEPHONE & FAX
Telephone:
+49 2831 9269822
Fax: +492831974140
These listings may also fit your interest.
Wuppertal

1979
good (used)
+++ This auction is held in cooperation with a longtime Maschinensucher dealer. +++
pressure: 315 t
column width: 1.650 mm
Stroke: 600 mm
table size: 1.600 × 1.110 mm
drawing cushion force: 150 t
drawing cushion stroke: 180 mm
installation height: 800 mm
Total power requirement: 65 kW
Machine weight: Approx. 31 t
Space requirement: Approx. 3,500 × 2,500 × 5,000 mm (L × W × H)
Including drawing cushion with 150 mm hole pattern distributed over the table.
+++ Machine can be inspected on request....
10
+++ This auction is held in cooperation with a longtime Maschinensucher dealer +++
General:
Control: B&S NC
cutting diameter: 320 mm
Carbty3gbd
saw band length: 4.240 mm
cutting width: 1,1 mm
saw band height: 34 mm
total power requirement: 5 kW
Machine weight: 1.6 t
Space requirement: 2.5 × 1.5 × 1.7 m
+++ The machine can be inspected under power ++
13
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control type: conventional
machine weight: approx. 3.3 t
Space requirement: approx. 3,150 × 1,850 × 2,350 mm (L × W × H)
Total power requirement: 6.4 kW
Working range:
Travel X / Y / Z: 800 / 450 / 450 mm
table clamping surface: 1050 × 627 mm
swivel table: -30° + 360°
distance spindle to table: 559 mm
spindle speed: 32 - 1.600 rpm
feeds longitudinal and cross: 10 - 500 mm/min
feeds vertical: 10 - 500 mm...
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control: Siemens 810 D
Control type: CNC
Machine weight: approx. 4.5 t
Space requirement: approx. 3,000 × 2,000 × 2,000 mm (L × W × H)
Total power requirement: 22 kW
Camm2yad79
Working area:
Travel X / Y / Z: 630 / 500 / 500 mm
table size: 800 × 500 mm
workpiece weight: max. 500 kg
spindle speed: 0 - 10.000 rpm
feeds: 1 - 30.000 mm/min
rapid traverse: 30 m/min
tool holder: SK40
Tool positions: 24 posi...
10
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control: Siemens - Sinumerik
Control type: CNC
Year of manufacture: 2001
dimensions: approx. 2.600 × 1.440 × 1.440 mm
Weight: approx. 2.000 kg
Working range:
Swing diameter over bed: 320 mm
Swing diameter over slide: 150 mm
chuck diameter: 200 mm
face travel: 185 mm
center distance: 750 mm
spindle mounting: MK6
Goxwucn
speed range 1: 14 - 900 rpm
Speed range 2: 56 - 3,550 rpm
+++ Machine can be inspec...
3
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
Diameter: 2.750 mm
Caj77dps7b
weight: 8 t
Scope of delivery: 1 piece
Bochum

1982
good (used)
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
Cai8zdwa3t
General:
Control: Siemens - Sinumerik 802D
Control type: CNC
year of construction: 2005 modernized, original year of construction: 1982
Working range:
Grinding diameter: 500 mm
grinding length: 2.750 mm
grinding wheel diameter: 750 mm
grinding wheel thickness: 120 mm
Workpiece weight: Max. 2.500 kg
Center distances (grinding lengths): 1,000 - 6,000 mm
12
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control: Brother CNC-B00
Year of manufacture: 2007
Dimensions: 1,890 × 3,669 × 2,260 mm (L × W × H)
Weight: Approx. 4.6 t
Working range:
Travel X / Y / Z: 550 / 400 / 415 mm
Rotational speed: 12,000 rpm
spindle distance: 645 mm
tool holder: HSK 40
Cavv3jka
tool places: 40
table dimension: 600 × 425 mm
table load: 200kg
+++ Machine can be inspected. +++
15
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
TECHNICAL DETAILS
General:
Control: Siemens 840 D
Control type: CNC
year of construction: 2004
tool holder: SK 50
Places in tool magazine: 192
Drive power: 37 kW
Cafm0grt0g
Working range:
Travel X: 1,100 mm
Travel Y: 900 mm
traverse path Z: 1.250 mm
spindle speed: 8.000 rpm
workpiece weight: 1,5 t
Pallet table size: 630 × 800 mm
Equipment/accessories:
- Coolant through the spindle (30 l/min at 50 bar, program...
15
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
B7zjpfxk
General:
Control: CNC MAZATROL PC 640 fusion
Year of manufacture: 2000
Dimensions: Approx. 2,500 × 4,300 × 2,800 mm (L × W × H)
Weight: Approx. 9,500 kg
Total power requirement: 75 kVA
Working range:
Travel (X / Y / Z): 560 / 630 / 600 mm
spindle speed: max. 12.000 rpm
Spindle motor drive power: 30 / 22 kW
Bearing diameter: 80 mm
Distance table to spindle nose: 80 - 710 mm
Number of pallets: 2 pieces...
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control: FANUC 21iMB
Year of manufacture: 2007
Dimensions: Approx. 2,700 × 4,300 × 3,071 mm (L × W × H)
Weight: Approx. 11,600 kg
Total power requirement: 60 kVA
Working range:
Travel (X / Y / Z): 800 / 560 / 560 mm
spindle speed: max. 10.000 rpm
Spindle drive power: 15 kW
Distance table to spindle nose: 150 - 710 mm
Type of spindle: NT 40
Table dimensions: 900 × 610 mm
Number of tables: 2× rotopalle...
15
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control: Siemens - 840D-SL
year of construction: 2006
chuck diameter: 200 mm
swing diameter: 210 mm
travels X / Z: 400 / 200 mm
Additional description:
Vvlwa3
With turret aligned for driven tools
Maintained condition
13
Straßburg

2007
excellent (used)
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
General:
Control: iTNC 530 Heidenhain
Year of manufacture: 2007
Dimensions: Approx. 3,000 × 2,500 × 2,800 mm (L × W × H)
Weight: Approx. 6 t
Total power requirement: 35 kVA
Working range:
Travel (X / Y / Z): 400 / 400 / 400 mm
Speed range main spindle: Max. 18,000 rpm
Main spindle drive power: 19 kW
Max. Torque: 130 Nm
Swiveling range: -105° to +40
Max. workpiece diameter: 500 mm
Max. Workpiece height: 400 mm
...
15
München

2005
excellent (used)
+++ This auction is held in cooperation with a long-time Maschinensucher dealer. +++
Machine is in very good condition with limited functionality (damaged linear guide, see pictures).
GENERAL:
Control: Siemens 840 D
Year of construction: 2005
Dimensions: 8,590 × 4,140 × 3,190 mm (L × W × H)
Weight: Approx. 22 t
WORKING RANGE:
Swing diameter: 610 mm
turning diameter: 390 mm
spindle distance: 2.250 mm
Y axis: 210 mm (slide 1)
B-axis: 240° (slide 1)
face travel / longitudinal travel: 267 / 1,840 m...
4
.
Make RÖHM
ISO 50 mount
incl. accessories according to pictures
.
.....
B32zmtlh
7
2 feed rollers Weinig
B3s2jksj
Make Weinig
feed rollers 2 pieces
steel helical toothed
roller diameter approx. 140 mm
roller width approx. 50 mm
bore 35 mm
keyway 10 mm
Location: Ex stock 54634 Bitburg
Delivery in as-is condition. as inspected.
- free loaded -
6
Front loader Kalmar
Electronics
Batteries good condition
Xgek8
with charger
5
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Tilting cast iron guide with rack and pinion movement
Shaft guard
B3oatonbhw
Cast iron frame
quality machine Useful width: 520 mm Table length: 3000 mm Power and Motors
Overall dimensions
4
.
Technical data :
.
Usable saw blades : 460 mm
.
6 sawing speeds : 8,5 / 12 / 17 / 23 / 26 / 35 / 46 / 70 m/min
.
Cutting range for profile material and for 460 blade approx :
90° flat (profile : flat / round ) : 400 x 150 mm
45° flat (profile : flat / round ) : 280 x 150 mm right + left
30° flat (profile : flat / round ) : 196 x 150 mm right + left
.
Cutting height for steel plates approx. 60 mm / for ST 37
Jx8p9e
.
Material clamping vertical and horizontal,
saw feed, hydraulic, 0 - 2000 mm/mi...
6
Bitburg

1997
excellent (used)
Blum drilling head for hole lines,17 - spindle for PRO CENTER 2000
17 - SPINDLE
hole spacing: 32 mm
Weight: 10,22 kg
Z2hgg
Ref.No: MZK.2880
Ser.No: AE 1402
Incl. drill (see photos)
Location: Ex stock 54634 Bitburg
- immediately available -
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
cast iron guide
protection Useful width: 410 mm Table length: 2500 mm Power and Motors
Voltage: 380 V Motor: 5.5 CV Overall dimensions
Weight: 660 Kg
B3oaxa2eyc
4
.
used machine base / substructure
width x depth x height approx. 1.13 x 0.89 x 0.79 m
Vertical 4-sided tubes , 80 x 80 mm
Cauiw3untb
Formerly used as substructure for an eroding machine
Load capacity estimated max. 1 to
.
.....
6
Bitburg

1997
excellent (used)
Blum drilling head for hole lines,17 - spindle for PRO CENTER 2000
17 - SPINDLE
hole spacing: 32 mm
Weight: 10,22 kg
Ref.No: MZK.2880
Cauin8re0d
Ser.No: AE 1402
Incl. drill (see photos)
Location: Ex stock 54634 Bitburg
- immediately available -
8
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Main components of the machine:
- Longitudinal sliding frames of the 4 special carriages for blocking and moving the pieces. Working field 14 ml. (X axis)
- The horizontal and vertical workpiece clamps can be automatically deactivated by CAD/CAM to allow the machining of larger than standard workpieces or to avoid collisions with the clamping devices. If the machining operations require it, the slides can be automatically replaced. The structure on whi...
5
Technical data :
Table surface 520 x 380 mm
Travel in X 400 mm
travel in Y 500 mm
electric height adjustment 380 mm
E3cpz02
max. distance table / spindle nose 510 mm
spindle motor 1 HP
mounting 2 MK
spindle stroke 170 mm
8 speed series 75 - 2000 rpm
6 automatic drilling feeds 0.02 / 0.04 - 0.06 / 0.12 - 0.09 / 0.18 mm/rev.
W x D x H approx. 1,6 x 1,7 x 1,9 m
weight estimated approx. 2 to
5
CHANGE DRILLING GEAR,9 SPINDLES HETTICH
890py28a
- Interchangeable drilling gear for hole line drilling in System 32
- Suitable only for BlueMax Modular Professional with pneumatic track drive
Location: ex stock 54634 Bitburg
- immediately available -
7
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Worktop: 3100 x 1250 mm
6 SCHMALZ consoles
Axis travel: X 3500 mm, Y 1815 mm, Z440 mm
Workpiece passage 200 mm thick
Milling spindle with VECTOR axis (4th axis)
Nfsharer
8.6 kW HSK63 600/24000 rpm
12 vertical and 6 horizontal drilling spindles
Integrated grooving unit
12 position on-board tool changer
Windows XP PC and network card
Suction cup, workpiece clamps and angle transmission available Power and Motors
Overall dimensions
...
4
.
Technical data :
Cutting length 1020 mm
sheet thickness in St 2,5 mm
backgauge up to 500 mm
Cauiugz08y
stroke rate approx. 63 /min
motor power 3 kW
width x depth without side stop 1,4 x 1,4 m
Weight approx. 0,75 to
.
Equipment :
- electric foot switch
- Operating mode : single stroke
- backgauge
- support table
- Side stop left
.
.....
8
Bitburg

2020
excellent (used)
Blum drill head for hole lines,9-spindle for PRO CENTER and Minipress PRO
B3mtaunu
9 -SPINDLE
hole spacing: 32 mm
Weight: 4 kg
Ref.No: MZK.281S
Ser.No: AN 03899
Location: Ex stock 54634 Bitburg
- immediately available -
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
capacity 3630 mm in X,
1650 mm in Y,
850 mm in Z
tool changer
spindle ISO30 40,000 rpm 4 kW
BOSCH vacuum pump
RMMA plastic machining, composites, etc. Power and Motors
Overall dimensions
Curhrnd
8
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Technical characteristics :
- Max machinable length 3200 mm
- Minimum machinable length 200 mm
- Maximum width 200 mm
- Minimum width 40 mm
- Maximum workpiece height 130 mm
Brm7hery
- Depth with max Ø to tenon 320 mm: 105 mm
- Tenoning carriage speed min / max 0/100 m / min
- Min / max profiling speed: 3/15 m / min
Tenoning:
1- end cut saw
5.5 hp (4 kW)
Saw Ø 400 mm
2- tenoning router
Counter bearing 50 x 620 mm
15 hp (11.3 kW)
Max tool Ø 320 mm
Axle s...
6
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Beam table
HSK63 electrospindle
4 axes
drilling unit 24 vertical spindles, 6 horizontal
milling group
X-groove saw blade
8 beam worktop, adjustable suction cup
work areas
clamping vices
B3obls3i8h
BIESSE WORKS software and panel optimization X working plan dimensions: 3390 mm Y working plan dimensions: 1850 mm Z working plan dimensions: 180 mm Power and Motors
Overall dimensions
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Drilling unitOnboard tool chargerNesting table
3-axis spindle, 11 kW, 1000 to 24000 rpm
Dgnoc89
10 Y / 10X vertical drilling unit
6 X / 2 Y horizontal drilling unit
XNG digital control
8-position on-board tool loader + pick-up loader on frame
machine for pieces X working plan dimensions: 3430 mm Y working plan dimensions: 1640 mm Power and Motors
Overall dimensions
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Manual descentDoor stand Power and Motors
Motor: 2 CV Overall dimensions
Ngv9nuij
6
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Heating plates
pressure 2.2 kg / cm²
18 kW diathermic oil boiler
timed pressing
Dyjuuq2
digital display Plate width: 1300 mm Plate length: 3000 mm Max temperature: 120 °C Number of cylinders: 6 Diameter of cylinders: 70 mm Power and Motors
Voltage: 400 V Power: 20 Kw Overall dimensions
Length: 3500 mm Width: 1500 mm Weight: 320...
4
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
B3ocjdav7k
HYDRONAILS balancer for trusses and industrial frameworks
set of tightening jigs (x14)
hydraulic press with bi-manual control Power and Motors
Overall dimensions
9
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
COMPOSITION:
- WEINMANN WMS120 multi-function machining and nailing bridge
- 3 x Preparation and assembly tables
Mw3f8c
- Intermediate transfer table Power and Motors
Overall dimensions
15
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Pin chain
-CANTER COSTA PRISMATIC/40
- 67kW
- 2 mobile blades Ø 800 /1000 mm max
- Min. distance between centres 60 mm, max 350 mm
- Ø wood min 100 mm, max 400 mm
- Slab ejection
- Recovery belt
- Roller track and transfer and edger introduction
- Multi-blade COSTA PUMA/2/50
- 79 kW
- 2 shafts 37 kW
- Conveyor belt width 350 mm
- Cutting height 160 mm
- Cutting width 350 mm
- Roller output for transfer on multi-blades for recovery or output belt
- SCHNE...
6
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
B3ocvtscgu
Power and Motors
Overall dimensions
15
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
4-sided moulder 6 tool holders
2 finishing planers (top and bottom)
B3ocyjmu07
Digital positioning
Automatic transfer in double tenoner
Double fast opening tenoner
620mm high scanned shafts
Automatic splinters
Automatic transfer to roll forming machine
Right and left digital roll forming machine
Nice compact installation Power and Motors
Overall dimensions
4
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Ø briquette 60 mm
P29lj
Compacting by hydraulic cylinder of chips and wood dust
Production from 15 to 60 kg/h
Automatic cycle with level probe Power and Motors
Power: 5.5 Kw Overall dimensions
Length: 1700 mm Width: 1200 mm Height: 1500 mm Weight: 800 Kg
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
F2278afqw
belts 150 mm wide with pneumatic oscillation
table 1440 mm tiltable 30 ° Power and Motors
Power: 3 Kw Overall dimensions
6
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
2 sanding groups + brush
1st roller 90 sh Ø 300 mm 15 kW
2nd self-pad roller assembly 11 kW
B3odkftgmz
3rd brush group
table extension / automatic centering belt
automatic probe
compressed air consumption: 12m3 / h
suction 200 m3 / h Useful width: 1100mm Advance speed: 4 à 20 m/min Power and Motors
Overall dimensions
Length: 1800 mm Width: 2050 mm Height: 2130 mm Weight: 2970 Kg
9
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
High digital display
B3odm2nzbc
1 combined roller / pneumatic sectioned pad sanding unit
feeler
antistatic brush unit at outlet
vacuum rubber mat Number of sanding groups: 1 Useful width: 1100mm Advance speed: 2 à 18 m/min Power and Motors
Overall dimensions
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Svtwr0
Special stainless steel brushing Useful width: 1300mm Power and Motors
Overall dimensions
3
Nevers, France

(dealership location)
ready for operation (used)
Technical characteristics
Nilubi77
1st group of sanding cylinder 15hp
2nd matrix group 15 hp
floating table
pneumatic tension Number of sanding groups: 2 Useful width: 900mm Power and Motors
Overall dimensions