Giant G2700 HD X-tra + wiellader / wheelloader / Radlader
Giant G2700 HD X-tra + wiellader / wheelloader ...
Giant G2700 HD X-tra + wiellader / wheelloader / Radlader
Giant G2700 HD X-tra + wiellader / wheelloader ...
Type of offer
New machine
Giant G2700 HD X-tra + wiellader / wheelloader / Radlader
Giant G2700 HD X-tra + wiellader / wheelloader ...
MACHINE DATA
- Machine type:
- Giant G2700 HD X-tra + wiellader / wheelloader / Radlader
- Model:
- Giant G2700 HD X-tra + wiellader / wheelloader ...
- Condition:
- new
PRICE & LOCATION
LISTING DETAILS
- Listing ID:
- A592-8694
- Update:
- 13.06.2022
DESCRIPTION
Type of fuel: Diesel
Field of application: Earthmoving
Cq9gdfpw
Field of application: Earthmoving
Cq9gdfpw
SELLER
LMB Horsmans BV
Contact person: Herr H.E.R. Horsmans
Holleweg 13
6343 RH Klimmen, Netherlands
Horsmans BV is een in Klimmen gevestigde leverancier van tractoren, landbouwmachines en horse equipment. Het landbouwmechanisatiebedrijf is dealer van diverse merken tractoren en machines.
Send inquiry
TELEPHONE & FAX
Telephone:
+31 45 209 7001
Fax: +31454052955
These listings may also fit your interest.
14
Stuttgart
2016
excellent (used)
+++ This auction is held in cooperation with a longtime Maschinensucher dealer. +++
General:
Packing dimensions (height): max. 200 mm
Packing dimensions (width): 25 - 450 mm
Packing dimensions (length): min. 80 mm
Foil roll (width): max. 700 mm
Foil roll (diameter): max. 400 mm
Film material: e.g. PE, PO, PP, bio film, recycled film
Film thickness: max. 15 μm
Control: Simens Sinamics D with 9" TP 900 display
Shrink tunnel:
Passage width: 500 mm
Passage height: 230 mm
Bnhqyvk9c
Length tunnel hoo...
4
Matelica (MC), Italy
(dealership location)
ready for operation (used)
DISTANCE BETWEEN CENTRES: 1000 mm
CENTRE HEIGHT: 325 mm
MAX SWING OVER BED: 650 mm
MAX SWING OVER CARRIAGE: 440 mm
BAR CAPACITY: 105 mm
SPINDLE: 80-1250 rpm; 7,5 kW; ASA 8" ; 400 mm
CONTROL UNIT: SIEMENS 808D
WEIGHT: 2250 Kg
OVERALL DIMENSIONS: 3010 x 1480 x 2110 mm
ACCESSORIES: ETHERNET PORT ;
USB PORT
NOTE: 8-POSITIONINGS TURRET HEAD; STEADY REST: ø:10-180mm; SWARF CONVEYOR; COLOR DISPLAY 7.5"
PRICE: To be defined
InStock
Gytaj0
4
Böheimkirchen, Austria
(dealership location)
new
sheet length: 1560sheet thickness: 3
Standard equipment:
- manual back gauge 500 mm
Ekd70amq0
- Cutting line lighting
- Side stop
- 2 sheet metal support arms
- Light barrier protection on the back
- autom. acting hold-down device (with rubber)
- Cutting gap adjustment from the front
- movable foot switch
For more see here:
5
Wiefelstede, Germany
(dealership location)
used
End mills, end mills, milling cutters
-Two knife trimmers
-Finishing cutter
-Diameter: 14 mm
-usable length: 30 mm
-Corner radius: 0.7 mm
-Carbide: assembled
Jh9wmqb
-Number: 88 pieces
-Price: per piece
-Weight: 8 kg
3
floor-plate length: 1345 mm
plate width: 845 mm
Bd203z80io
plate height: 28 mm
weight of the machine ca.: ca. 260 kg
transport dimensions LxWxH: 1500 x 900 mm
Steel plate, cast steel, used
- with diverse mounting holes M12
- with diverse (9x) clearance holes Ø 13mm
2
Niederlangen, Germany
(dealership location)
new
table length 3000 mm
table width 1500 mm
table height 200 mm
weight of the machine ca. 1,6 t
The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.
The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.
Grid lines at intervals of 100 mm make it easier for you to set up your device.
The welding tables are provid...
4
Deinze, Belgium
(dealership location)
used
Mecof CS10 X: 5100 - Y: 1200 - Z: 1030 mm
Byroagzm83
5
floor-plate length 2500 mm
floor-plate width 1300 mm
floor-plate height 300 mm
weight of the machine ca. 2800 kg
Details:
Table length 2500 mm
Dzm33val
Table width 1300 mm
Table height 300 mm
Machine weight approx. 2800 kg
Space requirement approx. 3 X 2 with underframe approx. 800 mm
4
Böheimkirchen, Austria
(dealership location)
new
sheet length: 2560sheet thickness: 2,5
Standard equipment:
- manual back gauge 500 mm
- Cutting line lighting
- Side stop
- 2 sheet metal support arms
- Light barrier protection on the back
- autom. acting hold-down device (with rubber)
- Cutting gap adjustment from the front
- movable foot switch
2sthza
For more see here:
5
Wiefelstede, Germany
(dealership location)
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor
-Roll width: 1200 mm
-Conveying length: 1930 mm
-Diameter: roll 80 mm
-Center distance: 155 mm
-Height: 850 mm
B8jc0lz2w
-driven: via sprockets
-without gear motor: kW
-Speed: m/min
-Number: 1x roller conveyors available
-Price: per piece
-Dimensions: 1365/1930/H850 mm
-Weight: 262 kg
14
Ref. -No.: 10311
Brand: VDF BOEHRINGER
Qlgct
Type: DUS 630 TI (630 X 8000)
Year of construction: 2006
2
table length 3000 mm
table width 1500 mm
table height 200 mm
weight of the machine ca. 1,6 t
Gxld08
The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.
The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.
The low-loaded sidewalls are still made of steel S355J2 + N f...
4
Deinze, Belgium
(dealership location)
used
Type: AH8000/2500/MSG-40
B9gnw7v8e
1 - Decoiler
Cap: 10
9
plate width 1000 mm
plate depth 1300 mm
Bzfs8azgg7
plate height 250 mm
Plate width: 1000mm
Plate depth: 1300mm
Plate height: 250mm
2
Böheimkirchen, Austria
(dealership location)
new
sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100
Bdf20erinj
Multi-edge blades for cutting aluminum, carbon steel, and stainless steel
Cutting-line illumination and wire for shadow-line cutting
• Stroke counter •
Quick cutting-length adjustment •
Hydraulic and electrical overload protection •
Squaring arm and front support arms •
Bed infill plates with ball transfers &b...
5
Wiefelstede, Germany
(dealership location)
used
Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor,
-Payload: 1,000 kg
2prssy
-directable
-Brake
-Ball bearings
-Tire size: 250 x 60 mm
-Mounting plate: 140 x 175 mm
-Total height: 305 mm
-Number: 6x bikes available
-Price: per piece
-Weight: 10 kg/piece
6
Hessisch Lichtenau
2003
used
Pneumatic gripper feed GPA (G.P.A. Italiana S.p.A)
pneumatic feed unit, belt feed, material feed
Beqgxov3lu
Type: ANM 300 x 300
Make no.: 425144 Order no. 2030764 Year of construction 2003
feed length: max. 300 mm
belt width: max. 300 mm
jaw width: 210 mm
Sheet thickness: max. 2 mm (depending on strip width)
Compressed air requirement: 6 bar
Feed force: 120 daN (at 6 bar)
Gripper holding force: 300 daN (at 6 bar)
- Pneumatic control valves for feed and gripper movement
- Feed length adjustable v...
4
length: 1000 mm
width: 800 mm
height: 630 mm
Jvxz8y
weight of the machine approx.: 1139 kg
Drill cube material made of cast steel.
The cube can be pivoted 90°.
T-slots according to DIN 650: a=28mm; h=52mm; b=49mm; c=20mm
- clamping surface vertical: LxW: 1000 x 400mm
- clamping surface horizontal: LxW: 1000 x 800mm
5
Ref: PO220147A
Polar 78 X Plus
width 78 cm
age 2011
computer control with monitor
touch screen
air table with blower
2 side tables with airbed
rear table cover
jogger RB 2
Qm7kx
11
Very well maintained drum chipper for fine chips.
Inlet height 100 mm. Inlet width 230 mm.
2uh38a
With feed rollers. Sieve. Drive motor 7,5 KW, also more possible.
Ready for demonstration.
2
Böheimkirchen, Austria
(dealership location)
new
sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 8500messurements (LxWxH): 4650 x 1700 x 1800
Coxtkdrg
Multi-edge blades for cutting aluminum, carbon steel, and stainless steel
Cutting-line illumination and wire for shadow-line cutting
• Stroke counter •
Quick cutting-length adjustment •
Hydraulic and electrical overload protection •
Squaring arm and front support arms •
Bed infill plates with ball transfers ...
4
Wiefelstede, Germany
(dealership location)
used
Heavy duty castors, heavy duty wheels, tires
-Payload: 1,000 kg
-Ball bearings
-Tire size: 250 x 60 mm
-Mounting plate: 140 x 175 mm
-Total height: 305 mm
-Number: 9x wheels available
Dvgdpwz
-Price: per piece
-Weight: 7 kg/piece
2
2 used steam boilers
-----
- mounted on a frame -
manufacturer : LOOS, Gunzenhausen
type : U-HD
heating surface approx. : 14 qm
capacity : 800 kg/h
allowable working pressure : 10,0 bar
increased test pressure : 18,5 bar
water contents low level approx. : 748 l
Qj2hbw
water contents full approx. : 1.108 l
year of construction : 2006
CE-Mark : CE 0036
equipped with Weishaupt combined burner gas&oil,
GL5/1-D, ZMD, 200-1.000 kW, 15-500 mbar, 20-84 kg/h,
fittings for gas...
4
- control: FANUC 15T
- max. turning diameter: 450 mm
- max. turning length: 2.020 mm
- max. spindle speed: 2.500 1/min
- spindle bore: 80 mm
- turret with 10 stations (not driven)
- travel range: X= 250, Y= 2.020mm
- tailstock, quill stroke 180 mm
- chip conveyor
- steady rest 88 - 160 mm
- weight: ca. 8.500 kg
C0n02j9
4
Deinze, Belgium
(dealership location)
used
8 controlled axes: Y1 / Y2 / Z1 / Z2 / X / Z1 / Z2
B3l0mu3tad
6
Hessisch Lichtenau
1974
used
Radial drilling machine WMW MEUSELWITZ type BR 40/2 x 1250
make no. 865662 -- 10/8560/070 year of construction 1974
drilling capacity in steel 40 mm
spindle cone MK5
largest projection of the spindle 1250 mm (to the column)
smallest projection of the spindle 300 mm (to the column)
distance spindle nose - base plate 650 - 1350 mm
speeds 20-1200 rpm 3 gear steps and stepless
Fe9k9nj
Pinol stroke max. 330 mm
feeds 0,063 - 0,63 mm/rev 6 steps
Base plate clamping surface 1450 x 920 mm
Main motor 2,2 ...
4
Böheimkirchen, Austria
(dealership location)
new
sheet length: 3060sheet thickness: 2
Standard equipment:
- manual back gauge 500 mm
- Cutting line lighting
- Side stop
Vwxgspfd
- 2 sheet metal support arms
- Light barrier protection on the back
- autom. acting hold-down device (with rubber)
- Cutting gap adjustment from the front
- movable foot switch
For more see here:
3
Wiefelstede, Germany
(dealership location)
used
Stainless steel elbow, welding elbow
-Size: 40 x 1.5 mm 90°
-Price: complete
Qlpbiretf
-Number: 39 pieces
-Weight: 7 kg
1 used steam boiler
-----
manufacturer : LOOS Gunzenhausen
type : U-HD 1250
heating surface approx. : 20 qm
capacity max. : 1250 kg/h
Qm37t
working pressure : 13 bar
increased test pressure : 23,4 bar
water contents low level approx. : 993 l
water contents full approx. : 1.365 l
year of construction : 1993
equipped with Weishaupt oil burner, switch cabinet,
feed water pump, and the existing small and large fittings.
1
table length 3000 mm
table width 2000 mm
Xrpks
table height 300 mm
total power requirement 0 kW
weight of the machine ca. 4 t
dimensions of the machine ca. 3 x 2 x 0,3 m
5
Ref. -No.: 10301
Brand: TITAN
Bj28tiw8e
Type: RU 350 x 1-1500
Year of construction: 1990
Type of control: Konventionell
Max. Grinding length: 1.500 mm
Max. Workpiece Weight: 300 kg
Grinding Diameter: 350 mm
Max. Dia. Of Grinding Wheel: 280-500 mm
Grinding Wheel Width: 80-100 mm
9
plate width 1000 mm
Bwrggr3w3y
plate depth 1000 mm
plate height 300 mm
weight 970 kg
System plates - assembly field - test field - assembly platform - clamping plate
Product parameters: can be combined as required.
Clamping plate: 1000 x 1000 x 300 mm
T-slots - width: 22mm
T-slot distance: 220mm
Number of grooves: 3x3
Edge distance: 114mm
Material: cast iron HT250.
Surface roughness: ra3.2-ra6.3.
Flatness less than 0.12 mm.
Surface processed according to DIN 876 / III
3
Metzingen, Germany
(dealership location)
1978
used
pressure 160 t
no. of strokes 40 - 120 Hub/min
sheet width mm
total power requirement 40 kW
Pressing capacity160ton
Table clamping area1,100 x 1,280mm
Ram clamping area850 x 890mm
Distance between guides1,120mm
Distance between columns (below guide ways)1,350mm
Distance between Table and ram in upper position approx.400mm
No. of strokes40 - 120/min
Adjustment of stoke67 / 115 / 160mm
Ram adjustment, motor driven125mm
Ejector travel50mm
Total electrical load, approx. 40 kW - 500 V - 50Hz
W...
4
Wiefelstede, Germany
(dealership location)
used
End mills, end mills, milling cutters
-four cutter
-Rough end mill
390tyecj
-Diameter: 25 mm
-usable length: 55 mm
-Corner radius: 4 mm
-Type: STG-160
-Number: 16 pieces
-Sale: only complete
-Weight: 6.5 kg
plate width 1500 mm
plate depth 4000 mm
plate height 300 mm
weight 4800 kg
dimensions of the machine ca. 1,5 x 4,0 x 0,3 m
Clamping plates - T-slot plates - plate field
4000 x 1500 x 300 mm
We have several clamping plates in different sizes, so you can use your
Design your request (plate field / clamping field) as desired.
This plate can be combined with a 4000x3000x300mm plate or with a
6000x3000x300mm plate.
Bt3sjauqkp
Number of hookers: 10
Edge distance: 66mm
Hook spacing: 22mm
Mat...
5
Wiefelstede, Germany
(dealership location)
used
End mills, end mills, milling cutters
-Cutter
Js3roq
-Rough end mill
-Diameter: 16 mm
-usable length: 20 mm
-Type: HSSE
-Number: 17 pieces
-Sale: only complete
-Weight: 4 kg
Wiefelstede, Germany
(dealership location)
2009
used
Assembly star, assembly table, workbench, welding table, clamping plate, turning device, container turning device, welding turning device
-Load capacity centric: max. 4000 kg
-Working width: 980 x 4700 mm
-Max. Diameter: 1600 mm
-Geared motor: 0.55 kW 5.6 rpm
-braked
-completely rotatable
-Two-hand operation
-Number: 1x devices available
-Price: per piece
Uk7077kbl
-Dimensions: 5200/1000/H1450 mm
-Weight: 750 kg
5
Wiefelstede, Germany
(dealership location)
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor
-Roll width: 600 mm
-Conveying length: 3400 mm
-Diameter roller: 84 mm
-Center distance: 270 mm adjustable
-Height: 815 mm adjustable to 930 mm
-driven: via sprockets
-Geared motor: 0.55 kW
Unidcmb8q
-Speed: 17 m/min
-Foot switch: right/left rotation
-Number: 1x roller conveyors available
-Price: per piece
-Dimensions: 3520/710/ H900 mm
-Weight: 260 kg
4
Wiefelstede, Germany
(dealership location)
used
Gear cutters, module cutters, tooth form cutters, module milling heads
-1x milling cutter: Ø 52/170 mm
-Diameter: 22 mm
-Weight: 2 kg
Qlykwgtkl
5
Wiefelstede, Germany
(dealership location)
used
DC brake, braking device, electric motor brake
-Manufacturer: AER Statomat
-Type: HD 222
-Current: 50+50 amps
-Operating voltage: 420 V AC
-Number: 1x power supply available
Uq393gm
-Price: per piece
-Dimensions: 160/175/H155 mm
-Weight: 2.5 kg
5
Wiefelstede, Germany
(dealership location)
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor
Bdhzb9ai
-Roll width: 805 mm
-Conveying length: 3200 mm
-Diameter roller: 90 mm
-Center distance: 200 mm
-Height: 280 mm
-driven: via sprockets
-Geared motor: 0.37 kW
-Speed: 10.8 m/min
-Number: 3x roller conveyors available
-Price: per piece
-Dimensions: 3200/920/H280 mm
-Weight: 362 kg
5
Wiefelstede, Germany
(dealership location)
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor
Tkdngcvyw
-Roll width: 1410 mm
-Conveying length: 2730 mm
-Diameter roller 85: mm
-Center distance: 110/220 mm
-Height: 230 mm
-driven: via gears
-without gear motor: kW
-Speed: m/min
-Number: 1x roller conveyors available
-Price: per piece
-Dimensions: 3020/1660/H230 mm
-Weight: 432 kg
5
Wiefelstede, Germany
(dealership location)
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor
Um2d7we89
-Roll width: 2000 mm
-Conveying length: 5000 mm
-Diameter roll: mm
-Center distance: mm
-Height: mm
-driven: via chain
-Geared motor: kW
-Dimensions: mm
-Weight: kg
5
Wiefelstede, Germany
(dealership location)
used
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor,
U2gjcia2v
-Roller is driven: via sprocket
-Rollers diameter: 80 mm
-Transport roller width: 910 mm
-Total length: 994 mm
-Recording: 15 mm
-Number: 54 rolls available
-Price: per piece
-Weight: approx. 9 kg/piece
5
Wiefelstede, Germany
(dealership location)
used
Wood milling cutter, milling head, milling tool,