Machining center
Kunzmann BA1000

Year of construction

2016

Condition

Used

Location

Beckingen

Show map

MACHINE DATA

Machine type:: Machining center

Manufacturer:: Kunzmann

Model:: BA1000

Year of construction:: 2016

Condition:: good (used)

Functionality:: fully functional

PRICE & LOCATION

Listing location:: Luisenstraße 6, 66701 Beckingen, DE

Call

TECHNICAL DETAILS

Travel distance X-axis:: 1,020 mm

Travel distance Y-axis:: 620 mm

Travel distance Z-axis:: 610 mm

Table width:: 600 mm

Table length:: 1,200 mm

Rotational speed (max.):: 12,000 rpm

Number of spindles:: 1

Equipment:: documentation/manual, rotational speed infinitely variable

LISTING DETAILS

Listing ID:: A169-16161

Update:: 25.09.2024

DESCRIPTION

Vertical CNC machining center
Manufacturer Kunzmann
Type BA1000
Year of construction 2016
Control Heidenhain iTNC530 HSCI
Machine on 24426h ( 26.08.2024 )
Spindle hours 8800h ( 26.08.2024 )
Travels X/Y/Z 1020/620/610mm
32 compartment tool changer
Table clamping surface 1200 x 600mm
Table load 850kg
Spindle speed max. 12.000rpm
Tool holder SK40
Linear stroke measuring system 0.001mm
IKZ 40bar
HR410 electronic handwheel
Chip conveyor
Dpp98B
Machine comes from a tool shop
It can be inspected and tested under power by prior arrangement.
Location Saarland 66701

The listing was translated automatically. Translation errors are possible.

SELLER

CS- Maschinenhandel

Contact person: Mr Christian Schweigert

Luisenstraße 6

66701 Beckingen, Germany

Registered since: 2008

22 listings online

CS-Maschinenhandel
An- und Verkauf gebrauchter Werkzeugmaschinen,

Demontage und Montage von Maschinen
Betriebsverlagerungen
Maschinenumzüge aller Art
Transportdurchführung und Entladung.

1984 Dreher gelernt, als Fräser, Bohrwerksdreher und CNC Fräser bis 2002 gearbeitet, CS-Maschinen wurde 2003 gegründet, seit dem verkaufen und vermitteln wir Werkzeugmaschinen jeglischer Art.

Show further legal information

Angaben gemäß § 5 TMG:

CS-Maschinen
Luisenstraße 6
66701 Beckingen

vertreten durch

Christian Schweigert

Haftung für Inhalte
Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und Aktualität der Inhalte können wir jedoch keine Gewähr übernehmen. Als Diensteanbieter sind wir gemäß § 7 Abs.1 TMG für eigene Inhalte auf diesen Seiten nach den allgemeinen Gesetzen verantwortlich. Nach §§ 8 bis 10 TMG sind wir als Diensteanbieter jedoch nicht verpflichtet, übermittelte oder gespeicherte fremde Informationen zu überwachen oder nach Umständen zu forschen, die auf eine rechtswidrige Tätigkeit hinweisen. Verpflichtungen zur Entfernung oder Sperrung der Nutzung von Informationen nach den allgemeinen Gesetzen bleiben hiervon unberührt. Eine diesbezügliche Haftung ist jedoch erst ab dem Zeitpunkt der Kenntnis einer konkreten Rechtsverletzung möglich. Bei Bekanntwerden von entsprechenden Rechtsverletzungen werden wir diese Inhalte umgehend entfernen.

Haftung für Links
Unser Angebot enthält Links zu externen Webseiten Dritter, auf deren Inhalte wir keinen Einfluss haben. Deshalb können wir für diese fremden Inhalte auch keine Gewähr übernehmen. Für die Inhalte der verlinkten Seiten ist stets der jeweilige Anbieter oder Betreiber der Seiten verantwortlich. Die verlinkten Seiten wurden zum Zeitpunkt der Verlinkung auf mögliche Rechtsverstöße überprüft. Rechtswidrige Inhalte waren zum Zeitpunkt der Verlinkung nicht erkennbar. Eine permanente inhaltliche Kontrolle der verlinkten Seiten ist jedoch ohne konkrete Anhaltspunkte einer Rechtsverletzung nicht zumutbar. Bei Bekanntwerden von Rechtsverletzungen werden wir derartige Links umgehend entfernen.

Urheberrecht
Die durch die Seitenbetreiber erstellten Inhalte und Werke auf diesen Seiten unterliegen dem deutschen Urheberrecht. Die Vervielfältigung, Bearbeitung, Verbreitung und jede Art der Verwertung außerhalb der Grenzen des Urheberrechtes bedürfen der schriftlichen Zustimmung des jeweiligen Autors bzw. Erstellers. Downloads und Kopien dieser Seite sind nur für den privaten, nicht kommerziellen Gebrauch gestattet. Soweit die Inhalte auf dieser Seite nicht vom Betreiber erstellt wurden, werden die Urheberrechte Dritter beachtet. Insbesondere werden Inhalte Dritter als solche gekennzeichnet. Sollten Sie trotzdem auf eine Urheberrechtsverletzung aufmerksam werden, bitten wir um einen entsprechenden Hinweis. Bei Bekanntwerden von Rechtsverletzungen werden wir derartige Inhalte umgehend entfernen.

Datenschutz
Die Nutzung unserer Webseite ist in der Regel ohne Angabe personenbezogener Daten möglich. Soweit auf unseren Seiten personenbezogene Daten (beispielsweise Name, Anschrift oder eMail-Adressen) erhoben werden, erfolgt dies, soweit möglich, stets auf freiwilliger Basis. Diese Daten werden ohne Ihre ausdrückliche Zustimmung nicht an Dritte weitergegeben.
Wir weisen darauf hin, dass die Datenübertragung im Internet (z.B. bei der Kommunikation per E-Mail) Sicherheitslücken aufweisen kann. Ein lückenloser Schutz der Daten vor dem Zugriff durch Dritte ist nicht möglich.
Der Nutzung von im Rahmen der Impressumspflicht veröffentlichten Kontaktdaten durch Dritte zur Übersendung von nicht ausdrücklich angeforderter Werbung und Informationsmaterialien wird hiermit ausdrücklich widersprochen. Die Betreiber der Seiten behalten sich ausdrücklich rechtliche Schritte im Falle der unverlangten Zusendung von Werbeinformationen, etwa durch Spam-Mails, vor.

Further legal information close

Show less

Call

Send inquiry

TELEPHONE & FAX

+49 6835 ... show

Fax:

These listings may also fit your interest.

Listing

Erkelenz

7,637 km

2014 Kunzmann BA 1000
KunzmannBA 1000

Call

Condition: used, Year of construction: 2014, X-axis feed 30000 mm/min. Y-axis feed 30000 mm/min. Z-axis power supply 24000 mm/min. Spindle taper 40 ISO/Bt/Mk Spindle power 14 kW Torque range 8000 rpm Tool changer 32 Spindle cooling in bar 20 Number of steered axes 3 Chip conveyor Cooling system Machine clamp on the table not included. Machine on the day of inspection for a correct assessment. Collection of the machine by arrangement CNC control brand: Heidenhain iTNC 530 differential taxation: No ISO cone: 40 travel x-axis: 1020mm C0Nz9Jweqc y-axis travel: 620mm z-axis travel: 610mm speed up to rpm: 8000rpm chip conveyor: Yes Coolant pump: Yes Workpiece weight max.: 850 KG T-slot table size B: 610mm T-slot table size L: 1200mm axes: 3 engine power (kW): 14.00kW Electrical connection: 400v overall dimension H: 2400mm overall dimension B: 2350mm overall dimension L: 3450mm machine weight: 6800

Listing

Floh-Seligenthal

7,898 km

Machining center
KunzmannBA1000 SK

€45,000

FCA ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2010, operating hours: 41,300 h, Functionality: fully functional, machine/vehicle number: 101125, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 8,000 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 60 h, coolant supply: 25 bar, Equipment: chip conveyor, documentation/manual, MACHINE DATA Machine type: Machining center 5 axis Manufacturer: Kunzmann ( MTRent, MTCut, Eumach ) Model: BA 1000-SK (HSM-5XC / UE110-5A) Machine number: 101125 Control: Heidenhain iTNC 530 Year of manufacture: 2010 Condition: ( very good ) used 5-axis simultaneous machining center with swivel head and attached rotary table - Rotary table Ø 500 mm ( hydraulic clamping / resolution 0,001° ) - 3-D probe Heidenhain TS 640 - Hinged belt conveyor with integrated slit filter unit 25µm (ejection side right) - Internal coolant supply ( IKZ= 25 bar ) Description: Kunzmann Make: Kunzmann Type: BA 1000 - SK Year of construction: 2010 x-path: 1020 mm y-path: 620 mm z-path: 810 mm Rapid traverse speed: (x/y/z) = 30/30/24 m/min Main drive: Motor spindle Spindle speed: 1 - 14000 rpm B-axis ( swivel head ) Swivel range: +30° / -120° hydraulic clamping / torque drive Rotary table diameter: 600 mm (max. workpiece weight: 500 kg) Table clamping surface: 1200 x 610 mm (max. workpiece weight: 850 kg) Number of tool positions: 40 positions Tool holder: BT40 Machine weight approx.: 8000 kg Equipment and special accessories: - Compressed air through the spindle - Glass scales in X and Y axis - Heidenhein HR410 electronic handwheel - Automatic tool measurement Heidenhein TT 140 Dpnunz - KinematicsOpt software option - HeidenheinTS 444 probe head ( 3D probe for automatic transfer during tool change = tool breakage control ) - External cooling optional water / air - Complete machine manuals available The motor spindle was recently replaced after a short circuit due to emulsion ingress ( approx. 60 spindle hours ) Furthermore, the spindle bearings on the X and Y axes were replaced in June 2024 The 5-axis machining center can be viewed by appointment under power can be viewed by appointment. Attention: Identical machine without mounted rotary table: See linked YouTube video You will receive an invoice with VAT included. We are not a specialist company and therefore cannot give any guarantees or warranties. We cannot guarantee completeness, the offer only includes the parts shown in the photos. For technical data, please refer to the photos or the manufacturer's homepage. All trademarks are the property of the respective companies. We reserve the right to make changes and errors. Do you have any questions in advance? We will be happy to answer them :-) no warranty

Listing

CNC vertical machining center KUNZMANN BA 1000

Root

8,011 km

CNC vertical machining center
KUNZMANNBA 1000

Call

Listing

Vertical Machining Centre KUNZMANN BA 1000/810 Vario

Kaiserslautern

7,870 km

Vertical Machining Centre
KUNZMANNBA 1000/810 Vario

Call

Condition: ready for operation (used), Year of construction: 2013, operating hours: 19,500 h, Control Unit Model iTNC530 Brand HEIDENHAIN Main Drive Number of spindles 1 Spindle speed range 12000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 1000 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm Media Chip conveyor Yes Internal cooling Yes Cooling pressure 25 bar Additional Equipment 4-axis Walter with AMF zero point system Spindle cooling 3D probe Accuracy package Rotary stroke gear WZW Complete oscillating arm for WZW High-performance milling spindle In-Line Electronic handwheel HR 410 Hinged belt conveyor Bkgsko2F Fixed tailstock This 4-Axis KUNZMANN BA 1000/810 Vario milling machine, manufactured in 2013, features advanced technology including a Walter with AMF zero point system and an IKZ 25 bar. It offers a broad travel range with X at 1000mm, Z at 800mm, and Y at 600mm. Equipped with a high-performance milling spindle and a spindle speed of 12000 rpm, it ensures precise and efficient operations. The machine also includes a 3D probe and an accuracy package with a direct measuring system in all axes. Reach out for more information about this milling machine. Application Types Milling

Listing

Lüneburg

7,734 km

Milling machine
KunzmannBA1500 H

Call

Condition: good (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 900 mm, spindle speed (min.): 10,000 rpm, overall weight: 9,500 kg, with path control 840D SL ShopMill Feed rates: X-axis: 20 m/min Y-axis: 20 m/min Z-axis: 20 m/min Rapid traverse: X-axis: 30 m/min Y-axis: 30 m/min Cubs3N30Bi Z-axis: 30 m/min Speed range vertical spindle, infinitely variable: 1 - 10,000 rpm Feed drives Brushless three-phase servomotors (digital) for each axis Main drive AC motor Power at 100% duty cycle: 10.00 kW Power at 40% duty cycle: 14.0 kW Distance spindle to table: min./max. 43/943 mm Distance from spindle center to Z-axis cover: 750 mm Equipment: - Tool changer 60-fold - HSK63 in-line spindle - Hinged belt conveyor integrated in the coolant tank - Coolant supply 40 bar - Rotating inspection window - Emulsion mist extraction system - Paper belt filter system - Chip cart - Automatic tool measurement HEIDENHAIN TT 460 - Setup kit 4th axis - CNC dividing head 4th axis - Linear path measurement

Listing

Universal milling machine KUNZMANN UF 6 / 3

Iserlohn

7,695 km

Universal milling machine
KUNZMANNUF 6 / 3

€5,250

ONO plus VAT

Call

Year of construction: 1986, Condition: good (used), Universal milling machine Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain Dudcsklr spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y and Z 0-250 mm/min Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Machine Docs Available Good condition Ready for demonstration .

Listing

Univ. NC tool milling machine KUNZMANN WF 3/4

Hessisch Lichtenau

7,826 km

Univ. NC tool milling machine
KUNZMANNWF 3/4

€18,000

Fixed price plus VAT

Call

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW 3O29J0Q3Wb Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Listing

Universal Milling Machine KUNZMANN UF 6 N

Leipzig

10,526 km

Universal Milling Machine
KUNZMANNUF 6 N

Call

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm Ctflqfzxse swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Accessories see photo *

Listing

Ubstadt-Weiher

7,892 km

Milling machine
Kunzmann WF7/3

€16,500

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 116 line control Technical data: >> Year of construction 1994 Machine no. 370119 Crjwjnn8Rq >> Rigid angular table >> Infinitely variable speed up to 3700 rpm >> Infinitely variable feed in 3 axes >> Traverse paths X/Y/Z: 600/400/400 mm >> Rapid traverse in x/y/z >> Table surface: 800 x 425 mm >> Table load: 300 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2500 kg >> Total power requirement: approx. 11kW Accessories and equipment: >> Heidenhain TNC 116 line control >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Machine feet >> Electronic handwheel To the machine : We are offering a Kunzmann WF7/3 milling machine with a Heidenhain TNC 116 line control in very good condition. The Heidenhain TNC 116 3-axis line control is a simple positioning control with program memory. Programming does not require any special programming knowledge. The required entries are requested and displayed on the screen via plain text dialogs. The machine also has vertical and horizontal hydraulic clamping. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power.

Listing

Waiblingen

7,958 km

Tool cutter
KUNZMANNWF 600 MC

Call

Condition: excellent (used), Year of construction: 2013, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 4,500 rpm, Equipment: documentation/manual, used universal milling and drilling machine WF 600 MC (very few operating hours from training facility) with Heidenhain contouring control TNC 320 Paths X/Y/Z= 600/400/400 mm Spindle speed 1- 4.500 rpm. Vertical milling head with quill 60mm fixed angle table 800 x 425mm incl. electric handwheel Heidenhain Dqnzbd SK 40 tool holder Additional equipment: Control panel on the substructure Software option 1 PC keyboard for TNC 320 CNC dividing head WALTER KU160L + faceplate 4 axis set-up kit Chip guard cabin with removable disk on the left side. Coolant device documentation Operating times of the machine: Control unit on: 11422:32:28 Machine on: 8655:26:07 Program run: 1272:54:26 Operating hours: 834:37:07 The machine is located at our premises in 71334 Waiblingen-Beinstein

Listing

Universal Milling Machine 6x BRIDGEPORT Kunzmann FritzW. div.

Büttelborn

7,840 km

Universal Milling Machine
6x BRIDGEPORT Kunzmann FritzW.div.

€6,500

Fixed price plus VAT

Call

Listing

Universal Tool Room Milling Machine Kunzmann WF 7/3

Heilbronn

7,927 km

Universal Tool Room Milling Machine
KunzmannWF 7/3

Call

Year of construction: 2001, Condition: good (used), Heidenhain TNC 310 cnc control Chqlskz9G8 electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Listing

Friesenheim

7,898 km

Tool cutter
KunzmannWF 4/3 TNC 124

Call

Condition: used, Year of construction: 2004, Functionality: fully functional, Kunzmann WF 4/3 Milling machine TNC 124 Manufacturer: Kunzmann Type: WF 7/3 Milling machine TNC 124 Year of manufacture: 2004 Condition: used, from training workshop x-travel: 400 mm y-travel: 350 mm z-path: 400 mm Tool holder SK 40 Spindle speeds 1.0 - 4,000 rpm Feed rates 0 - 2000 mm/min Bsnobnpdxfm Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Control TNC 124 Motor power 5.5 kW Weight 1800 kg Space requirement approx. 2000 x 1000 x 2100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE-compliant Scope of delivery - Technical documentation - Full protection cabin - HR 410 electronic handwheel

Listing

Universal Milling Machine KUNZMANN WF 4/3 TNC 124

Ahaus

7,617 km

Universal Milling Machine
KUNZMANNWF 4/3 TNC 124

Call

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice Bsmmxb0Anps - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Listing

Ubstadt-Weiher

7,892 km

Milling machine
KunzmannWF 4/3

€24,500

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control Super CONDITION CE-compliant !!! Technical data: >> Year of construction 2001 >> Turn-tilt-swivel table (4-axis digital rotation) >> Speed: infinitely variable up to 4000 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Traverse paths X/Y/Z: 400/320/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 mm x 395 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1400 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 3 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control unit and programming examples >> Fully protected cabin >> Coolant system >> Electronic handwheel HR410 About the machine : Cf0Tqxfg28 We are offering a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy to operate control. Furthermore, the machine has vertical and horizontal hydraulic clamping. It is very easy to convert from vertical to horizontal by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power.

Listing

Universal Milling Machine KUNZMANN UF 6 1R

Ennepetal

7,685 km

Universal Milling Machine
KUNZMANNUF 6 1R

Call

Year of construction: 1979, Condition: used, x-travel 0450 mm y-travel 400 mm z-travel 420 mm table-size 800 x 300 mm spindle turning speed range 60 - 2800 U/min spindle taper SK 40 feed in x - axis 0- 1000 mm/min Cvbplmcb rapid traverse 2000 m/min total power requirement 5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,42 x 1,5 x 1,7 m

Listing

Milling machine RESERVIERT! Kunzmann WF 7/3 CNC

Germersheim

7,874 km

Milling machine
RESERVIERT! KunzmannWF 7/3 CNC

€18,000

EXW ONO plus VAT

Call

Condition: used, Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 370552, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 2,000 m/min, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 4 m/min, table width: 350 mm, table length: 650 mm, rotational speed (max.): 4,500 rpm, table load: 300 kg, overall weight: 1,950 kg, space requirement width: 2,000 mm, space requirement length: 2,300 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are selling our Kunzmann WF7/3 CNC for space reasons. It has served us well for years, but now has to make way for something new. It is in good condition and currently still connected, so it can be demonstrated. Technical data: - Year of manufacture 2005 - infinitely variable speed up to 4500 rpm - stepless feed from 0 to 1000 mm/min - travels: 600/400/400 mm - X/Y/Z - rapid traverse: 5 / 5 / 4 m/min X/Y/Z - Tool holder SK40 - Weight approx. 1950 kg - Space requirement approx.: 2.5 x 2.5 x 2.5 m Equipment: - Heidenhain TNC 310 control - Hydraulic clamping - Automatic central lubrication - Spindle brake - Work area enclosure - Coolant system - Spindle head manually rotatable +/-90° - electric handwheel - Work area light - Complete documentation on paper and CD - EC declaration of conformity - TNC 310 exercise booklet Cghkqk09Uq

Listing

Emmelshausen

7,767 km

Milling machines
KunzmannBA 1400

Call

Condition: used, Year of construction: 2015, Travel distance X: 1400 mm Uwujezzc2J Travel distance Y :700 mm Travel distance z: 750 mm Coolant system External cooling Air through mould HR 410 electronic handwheel Spindle blow-out system Spindle oil cooler Automatic centralised lubrication Spiral chip conveyor (2-fold) Levelling elements

Listing

Friesenheim

7,898 km

Tool cutter
KunzmannWF 610 MC

Call

Condition: like new (used), Year of construction: 2022, operating hours: 150 h, Functionality: fully functional, Kunzmann WF 610 MC Milling machine (2022) Manufacturer: Kunzmann Type: WF 610 MC Milling machine Year of manufacture: 2022 Condition: very good, like new, little used Spindle hours: approx. 150h Availability: Immediately from stock 77948 Friesenheim Control HEIDENHAIN TNC 620 X-path 610 mm Y-path 400 mm Z-path 450 mm Main drive (100%/25% ED) 6.8/13.0 kW Speed range 1-5,000 rpm Tool holder SK 40 DIN ISO 7388-1 Feed range up to 5 m/min Weight approx. 2,500 kg Angled table, rigid Clamping surface 800 x 425 mm T-slots 6 x 14 H 7 Cx03M97H Table load max. 300 kg Coolant system Machine light Horizontal milling spindle with gearbox Automatic switch-off function Collision protection clutch for X- Y- Z-axis TS460 set-up kit and TT460 automatic tool measurement CAD import software Scope of delivery: - El. handwheel HR 510 - 3D probe TS 460 - Original documentation

Listing

Machining Center - Vertical KUNZMANN BA 600

Karlsbad

7,905 km

Machining Center - Vertical
KUNZMANNBA 600

Call

Condition: used, Year of construction: 1998, x-travel:600 mm y-travel:400 mm z-travel:600 mm table surface area:750 x 450 mm control:TNC 410 HEIDENHAIN turning speeds:50 - 8000 U/min tool change unit:24 tool taper:SK 40 table load:400 kg rapid traverse:20 m/min spindle drive:9 / 12 kW total power requirement:18 kVA kVA weight of the machine ca.:3,2 t dimensions of the machine ca.:2500 x 1600 x 2800 mm incl. IR meashuring system Heidenhain TS 640 inkl. elektr. Handwheel Heidenhain HR 410 Qq7Sm08 inkl. 10 pcs. SK 40 tools

Listing

Ubstadt-Weiher

7,892 km

Milling machine
KunzmannWF 7/3

€24,500

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Tool milling machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 control Super CONDITION CE-compliant !!! Technical data: >> Year of construction 2000 >> Rigid angular table >> Speed: infinitely variable up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 1000 mm/min >> Traverse paths X/Y/Z: 600/400/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 300 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Main drive motor: 4 kW >> Total power requirement: approx. 7 kVA Accessories and equipment: >> Heidenhain TNC 124 control >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake Ceiyflbluu >> Technical documentation, spare parts diagrams, operating instructions for the control unit and programming examples >> Fully protected cabin >> Coolant system >> Electronic measuring probe About the machine : We are offering a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company of an automobile manufacturer where it was only used a little for training. A very easy to operate control. The machine also has vertical and horizontal hydraulic clamping. It is very easy to convert from vertical to horizontal by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power.

Listing

Haiger

7,769 km

Milling machine
KunzmannWF 4/3

€19,500

Fixed price plus VAT

Call

Condition: like new (used), Machine like new from laboratory x-path 400 mm y-path 320 mm z-path 400 mm Control Heidenhain TNC124 table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivels 90 degrees Total power requirement 5.0 kW Uzdzkyh Machine weight approx. 1.3 t Space requirement approx. 2.00 x 2.00 x 2.00 m

Listing

Beckingen

7,764 km

Tool cutter
KunzmannWF650

Call

Condition: excellent (used), Year of construction: 2006, operating hours: 2,000 h, CNC universal tool milling machine Manufacturer Kunzmann type WF650 year of construction 2006 Control Heidenhain iTNC 530 ( 5 axis control ) 21045 switch-on hours 5355 spindle hours ( 31.10.24 ) Qedkgwf Clamping surface 1000 x 600mm Table load 450kg travel X/Y/Z 650/500/450mm max. speed 6.500rpm 2 gear stages Tool holder SK40 Quill stroke 60mm Head tiltable +-90° 20 compartment tool changer Electronic handwheel HR410 Chip flushing hose Geometrically the machine is very good, there is also a measurement report from Kunzmann. Dimensions Weight 2.3 x 2.7 x 2.25m Weight approx. 5500kg Machine is in a very good used condition

Listing

Kaiserslautern

7,870 km

CNC Milling Machine
KUNZMANNWF 610MC

Call

Year of construction: 2016, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 620 HSCI Main Drive Stroke 70 mm Number of axis 3 Movement X-Axis Rapid Traverse 5000 mm/min Y-Axis Rapid Traverse 5000 mm/min Z-Axis Rapid Traverse 4000 mm/min Workpiece Workpiece X 610mm Workpiece Y 400mm Workpiece Z 450mm Table Table load 2000 kg Br2Ushnsssw Additional Equipment Chip Tray Safety Handwheels in all 3 Axes Automatic Central Lubrication Linear Measuring Systems Vertical Milling Head Swivelling: ± 90° This 3-axis KUNZMANN WF 610MC was manufactured in 2016. A robust CNC milling machine featuring a working area of 610 x 400 x 450 mm, it offers both horizontal and vertical spindle operations with speeds up to 5000 min-1. Equipped with Heidenhain TNC 620 HSCI for precise control, rapid traverses reach up to 5000 mm/min in x and y, and 4000 mm/min in z. If you are looking to get high-quality milling capabilities consider the KUNZMANN WF 610MC machine we have for sale. Contact us for more information. Application Types Milling

Listing

CNC universal milling machine Kunzmann WF4/3 TNC124

Ubstadt-Weiher

7,893 km

CNC universal milling machine
KunzmannWF4/3 TNC124

€28,500

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Ladies and Gentlemen, We are selling a Kunzmann WF4/3 CNC milling machine built in 2004. The machine can be operated manually and controlled. The Heidenhain TNC124 control is ideal for learning the basics of CNC programming and is nevertheless very popular in production and for machining special parts. The vertical milling head, which can be folded away very quickly, rounds off the Kunzmann as a real all-rounder with a small footprint. The machine has been thoroughly checked by us in the workshop and is therefore in absolutely new condition. You are welcome to see this for yourself in advance. Availability: immediately Year of manufacture: 2004 Control: Heidenhain TNC124 Table: rigid angular table 650x350mm travels: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed rate: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: Coolant device, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Bsdlbtjojzi Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can fit additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Advertise here

Machining centerKunzmann BA1000

MACHINE DATA

PRICE & LOCATION

TECHNICAL DETAILS

LISTING DETAILS

DESCRIPTION

SELLER

Send inquiry

TELEPHONE & FAX

Machining center
Kunzmann BA1000