Edge processing machine
IMA
Quadromat L 12 V
Edge processing machine
IMA
Quadromat L 12 V
Year of construction
1994
Type of offer
Used
Location
Bad Oeynhausen, Deutschland
MACHINE DATA
- Machine type:
- Edge processing machine
- Manufacturer:
- IMA
- Model:
- Quadromat L 12 V
- Year of construction:
- 1994
- Condition:
- used
PRICE & LOCATION
LISTING DETAILS
- Listing ID:
- A357-229
- Reference number:
- 060
- Update:
- 25.05.2022
DESCRIPTION
- Feed rate (m/min.): approx. 18 unchangeable
- max. edge thickness (mm): 12
- heating zone
- edge banding unit: with trimming knife
Kmwio0fn
- pressure zone
- cap front-rear edge
- Multifunctional unit
- Profile scraper: top and bottom
- Machining mode: Due to the arrangement of the motors, a workpiece side can be milled on the top, bottom, front and rear sides.
- Smoothing unit: smoothing of milled, drawn-off quarter circle profiles and radii R2 to R4 of the glued-on PVC edging materials with an upper and lower smoothing zone
The advertisement was translated automatically. Translation errors are possible.
- max. edge thickness (mm): 12
- heating zone
- edge banding unit: with trimming knife
Kmwio0fn
- pressure zone
- cap front-rear edge
- Multifunctional unit
- Profile scraper: top and bottom
- Machining mode: Due to the arrangement of the motors, a workpiece side can be milled on the top, bottom, front and rear sides.
- Smoothing unit: smoothing of milled, drawn-off quarter circle profiles and radii R2 to R4 of the glued-on PVC edging materials with an upper and lower smoothing zone
The advertisement was translated automatically. Translation errors are possible.
SELLER
V. Grum-Schwensen GmbH
Contact person: Herr Jörg Gerstel
Zur Bauernwiese 12
32549 Bad Oeynhausen, Germany

Die V. Grum-Schwensen GmbH bietet seit 1955 national sowie international Neu- und Gebrauchtmaschinen, Lösungen für die Holzbearbeitung, Werkzeuge/Zubehör, Maschinenreparaturen sowie Unterstützung bei Betriebsauflösungen bzw. bei der Abwicklung von Liquidationen an. Wir verfügen über eine hohe Expertise in diesem Markt.
Unser komplettes Produktangebot und Serviceleistungen finden Sie auf der V. Grum-Schwensen Website.
Since 1955, V. Grum-Schwensen GmbH has been offering national and international new and used woodworking machines, solutions for woodworking, tools / accessories, machine repairs as well as support in case of liquidation. We have a high level of expertise in this market.
Our complete product range and services can be found on the V. Grum-Schwensen website.
Unser komplettes Produktangebot und Serviceleistungen finden Sie auf der V. Grum-Schwensen Website.
Since 1955, V. Grum-Schwensen GmbH has been offering national and international new and used woodworking machines, solutions for woodworking, tools / accessories, machine repairs as well as support in case of liquidation. We have a high level of expertise in this market.
Our complete product range and services can be found on the V. Grum-Schwensen website.
Weitere rechtliche Angaben
V. Grum-Schwensen GmbH
Zur Bauernwiese 12
32549 Bad Oeynhausen
Deutschland
V. Grum-Schwensen GmbH
Sitz der Gesellschaft: Bad Oeynhausen
Amtsgericht: Bad Oeynhausen
Handelsregister: B Nr. 33
Geschäftsführer: Jörg Gerstel
USt-Id.: DE 126019539
Zur Bauernwiese 12
32549 Bad Oeynhausen
Deutschland
V. Grum-Schwensen GmbH
Sitz der Gesellschaft: Bad Oeynhausen
Amtsgericht: Bad Oeynhausen
Handelsregister: B Nr. 33
Geschäftsführer: Jörg Gerstel
USt-Id.: DE 126019539
Send inquiry
TELEPHONE & FAX
Telephone:
+49 5731 6088732
Fax: +4957315741
These listings may also fit your interest.
15
Premilling Unit: yes
Jiewiwz
Max feed speed: 25 m/min
15
Numerical Control Icon Open Ts Panel height 65 mm Solid mm 12 Pvc / Abs mm 3 Feed speed up to 20 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Anti-adhesive group Grinding group Lamps to heat the edge of the panel Reel holder plate Gluing unit for EVA hot melt glue with glue pot Edge pressure...
12
one-sided edge banding machine
Make: IMA
Type: Advantage 400L
Year of construction: 2011
Technical specifications:
Working length 6700 mm
Feed speed 20 m/min for Advantage 400 + 400L
Joining milling unit 08.379
Snipping unit 08.415
Milling unit 08.0555
Copy milling unit SKF-L
Profile scraper unit 08.519
Self-scanning scraper unit 08.521
Buffing unit 08.617-2
Standard milling unit 08.190
Technical data "workpiece":
Workpiece length min. 150 mm
Workpiece width min. 65*/ 150 mm
*at max. workpie...
8
Gronau (Westfalen)

1999
ready for operation (used)
Edge banding machine
Make IMA
type Quadromat 3512 U
year 1999
edgebanding material, veneer rolls and strips, artifical wood, solid wood strips
edge height 14-50 mm
edge thickness 04-12 mm
speed 18.000 rpm
cross-cut unit
trimming unit
profile scraper
Cb0gays0sh
buffing unit
Flat scraper
C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding
Goose-neck machine - Front emergency carpets
Safety cabin (enclosure) of the working head
Numerical Control Type ICOS CNC - Software IMAWOP
Working table with pods and rails (No. 8 rails x mm 1400)
LED system (on the rails) for the vacuum pods positioning
Automatic Tools Changing System (Store with No. 18 positions)
Useful working area (X - Y - Z) mm 4000 x 2100 x 300
Qcfpt
Useful working area (X -Y - Z) in...
Bergatreute, Germany

(dealership location)
1989
good (used)
Machine with full equipment
Length approx. 9 m
Joints
Ebensaegen
J9v0qz
Pre-milling
Rounding milling
Scraper
Buffing
Copy corners
15
Position 1: CNC Machine Centres With Pod And Rail IMA-BIMA/P/780/V/2H/D/UF
Position 2: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA-BIMA/P/780/V/2H/D/UF
J7ujt00z
7
Numerical Control Icon Open Ts Panel height 65 mm Solid mm 12 Pvc / Abs mm 3 Feed speed up to 20 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Anti-adhesive group Grinding group Lamps to heat the edge of the panel Reel holder plate Gluing unit for EVA hot melt glue with glue pot Edge pressure...
10
C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding
Numerical Control IMATRONIC 231 (IMAWOP)
Max useful working area (without edge banding process) mm 5000 x 1630 x 100
Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness)
No. 8 movable rails (supports) length mm 1200
LED displaying both the axe X and axe Y position
Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h)
Safety side metal grids and front emergency carpets
M...
Bergatreute, Germany

(dealership location)
1994
good (used)
Colour red- white
10 m long machine with full equipment and return roller conveyor.
Joining milling
Ebenschneiden
Ebenfraesen
rounding fraise
Corner milling
Yofkgda
scraper
wobble
15
Pollenzo, Italy

(dealership location)
used
X axis working area: 5200 mm
Y axis working area: 1200 mm
Working Table: Pod and Rail
Ccwqgxkpw3
Main Electrospindle power: 12 KW
Number of controlled axes: 4 axes
Maximum edge height: 44 mm
Total number of tool changer positions: 18
15
Numerical Control Imatronic with ImaWop Software Working field in X axis 6000 mm Working field in Y axis 1935 mm N ° 10 panel support bars for positioning the suction cups N ° 6 Pneumatic bakelite bars for lifting the panel N ° 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing N ° 1 vertical electrospindles with C axis with automatic tool change Automatic tool change with 18 positions on the back of the machine Drilling head with 26 spindles arranged ...
4
TURNING DEVICE FOR PANELS (FROM CROSSWISE TO LENGTHWISE)
Equipment to be placed after an independent Double End Tenoner (or double-side
Combination - Sizing & Edge Banding machine)
To turn at 90° panels (workpieces) from cross sense (cross-wise) to longitudinal
sense (length-wise)
Built-in electric and command panel
P7yn3kwp
1st Table (crosswise) with motorized rollers
Motorized turning device, with double cone (1 top + 1 bottom)
2nd Table (lengthwise) with motorized rollers
Min dimensions ...
15
Corner Rounding Unit: yes
Qml0d
Combination Squaring Edgebanding Machine: First Pass
Max Panel Width: 1800 mm
Max feed speed: 60 m/min
Operating Units Right Side: 14 nr
Operating Units Left Side: 14 nr
4
TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS)
Equipment to be placed between two Double End Tenoners (or two double-side Combination
machines) in a line (straight position) or before an independent Double End Tenoner (or
double-side Combination machine)
To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense
(crosswise)
Built-in electric cabinet and command panel
Total installed motor power KW 3,5 (ca.)
P83gjn0h
1st table (longitudinal) with motorized...
15
Combination Squaring Edgebanding Machine: First Pass
Max Panel Width: 1600 mm
Max feed speed: 52 m/min
Mxidjg
10
SINGLE SIDE EDGE BANDER (Left)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Edges thickness in stips / lippings (min/max) mm 3 / 12
Panels thickness (min/max) mm 8 / 60
Numerical Control ICOS open TS
Feeding speed (adjustable) m/min 4 - 20
Top pressure system with rubber belt
Spraying unit (Anti-sticking liquid)
In-feed fence, adjustable by N.C.
Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0)
Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513
Band Pressure zone (N.C. adjust...
10
Mörsdorf

1994
good (used)
Semi-automatic cold circular saw / sawing line make KALTENBACH
type RKT 760 G(V) /T6/L-120 NC
Machine # 116351 Year of construction 1994
Technical data:
Saw blade diameter 710 / 760 mm
cutting width max. 6,0 mm
rotary base adjustment stepless left/right 30°/45°
cutting range 90° round 245 mm
90° flat 500 x 30 mm
60° U-profiles 380 x 102 mm
45° U-profiles 300 x 100 mm
30° U-profiles 220 x 80 mm
90° double T-beam 400x155 mm
60° double T-beam 340x137 mm
45° double T-beam...
3
Friedberg, Germany

(dealership location)
2007
used
Cabin
Bz8aauoftz
ref: 320815 vehicle plug 160 A DIN, mains plug CEE 400V/16A, used TriCom L charger 24 V/120 A incl. cable and plug REMA 160 A, without electrolyte circulation, mains plug 16 A model battery:
15
9
L.+Z. lathe make VDF BOEHRINGER type V 5
serial no. 0951 002 092 17624
Technical data:
Center width 1250 mm
center height 350 mm
turning diameter over bed 680 mm
spindle bore 125 mm
bed width 500 mm
18 spindle speeds 11.2 - 560 rpm.
32 feeds longitudinal 0.071 - 2.5 mm/rev.
32 feeds plane 0.0315 - 1.12 mm/rev.
67 metric threads 0.4 - 224 mm
81 inch threads 70 - 1/8 Gg/1"
61 modular thread 0.1 - 56 M
81 DP thread 280 - 1/2 Gg/1"
Motor power 18,5 kW
Outer dimensions L x W x H 3600 x 1400 x 1700 m...
8
Planetary mixer
Model: V-Mixer 120 L.
Professional machine with robust technology!
for best results!
Dsx9renze
LED display
10 power levels and timer
Tamper protection / safety grille with protective circuit
Mixer with tools:
1 whisk, 1 dough hook, 1 flat mixer
1 120 liter stainless steel kettle
Boiler stroke electrical
DGUV V3 checked
Connection 400V, 6 kW, 16A-CEE plug
Dimensions: 853 x 1102 x 1958 mm, WxDxH
New machine
with 24 months warranty
Option:
- Programming of 20 recipes with 7 ste...
3
Barntrup, Germany

(dealership location)
used
Veneer Butt Joining Machine Kuper
Type: FL/L – 1200 V
Machine-no. 36010145
Year of manufacture: 1996
Throat depth 1200 mm
Feed speed infinitely variable approx. 10 - 50 m/min.
Veneer thickness approx. 0,4 - 2,0 mm
Veneer length from approx. 400 mm
Veneer strip width from approx. 50 mm
Drive 1,1 KW, 400 V, 50 Cy.,
Operating Voltage 400 V, 50 cyc.,3 Ph. + MP
Total connected load 6,5 kW
Air consumption approx. 600 NL/min.
Paint RAL 6011
Net weight approx. 1205 kg
For the longitudinal splicing of ...
3
Friedberg, Germany

(dealership location)
2007
used
Cabin
Ptstt
ref: 320817 vehicle plug 160 A DIN, mains plug CEE 400V/16A, used TriCom L charger 24 V/120 A incl. cable and plug REMA 160 A, without electrolyte circulation, mains plug 16A model battery:
3
Friedberg, Germany

(dealership location)
2007
used
Cabin
ref: 320816 vehicle plug 160 A DIN, mains plug CEE 400V/16A, used TriCom L charger 24 V/120 A incl. cable and plug REMA 160 A, without electrolyte circulation, mains plug 16 A model battery:
Cxz3cxw
15
Deutschland

2018
excellent (used)
single-sided direct postforming machine for curved caravan fronts
Brand: Wehrmann
Type: Combima /K/I/R80/1260/V
Year: 2018
Technical data:
A single-sided throughfeed postforming machine for the
postforming and postfolding process, for processing curved
workpieces in caravan construction. For workpieces to be
profiled made of wood/wood materials with laminate
(CPL,HPL) as surface material. The laminate protruding
for the postforming process is located in the machine
on the underside of the ...
1
Charger for forklift
Type 12 and 24 V 30 A
for wet and gel batteries
charging time 7 - 14 hours from 183 - 340 Ah
incl. charging plug Rema 80 or Anderson SBE
Delivery time: immediately from stock
Delivery . from 26160 Bad Zwischenahn
Etd8gcn
Shipping flat rate 8,50 €
15
B7bosupk
12
Ccg0nrc7xf
2
++ outlet ++ 30 pieces
Caa0shfk
Electric motor 1.8 kW / 230 V with motor protection 12A, 1Ph
Item number 2502181
Catalog Directory
Compressed Air Technology
Compressed air system componentsElectric motors
Net weight: 12 kg
Shaft diameter 19 mm
35 pieces available
Price per piece
15
Dhpjf3zm0
15
Stuhr, Germany

(dealership location)
2009
used
5
Wijchen, Netherlands

(dealership location)
2018
new
BT onderdeelnummer = 7580034
Normale nieuwprijs 13.250,- euro
NEW - Unused
Qkzuf
1
Bad Zwischenahn

2022
new
12 V 26 AH / 12 FBL 100
L 166 W 175 H 126
Weight 8,5 kg
NORMS AND STANDARDS
IEC 60896 Part 21 - VRLA test procedures
IEC 60896 Part 22 - VRLA requirements
B77oamebti
BS6334 / UL 94 V0 / IEC 707 FV0
Eurobat "10/12 years LONG LIFE" for top terminal models *
Eurobat ">12 years VERY LONG LIFE" for front terminal models
5
Rosenfeld, Germany

(dealership location)
2005
new
Thermal Transfer Labelling Machine
Okps72cfw
Item condition: new / very good
Stock: 1 piece
Available: immediately, from stock
Warranty: 1 year
15
Pwx8wm
14
Zutphen, Netherlands

(dealership location)
1992
good (used)
General information
Bodywork: Semi low loader
Year of manufacture: Aug 1992
Colour: Red
Axle configuration
Cclk8r0lie
Rear axle 1: Max. axle load: 9000 kg
Rear axle 2: Max. axle load: 9000 kg
Rear axle 3: Max. axle load: 9000 kg
Measures
Width: 249 cm
Wheelbase: 75 cm
Weights
Empty weight: 10.060 kg
Carrying capacity: 34.940 kg
GVW: 45.000 kg
Functional
Dimensions of cargo space: 1360 x 249 x 90 cm
Height of cargo floor: 90 cm
Extendable superstructure: Yes
Maintenance, history and conditio...