Pipes - and profiles

IDE Kabelkanal Werkzeuge

Condition: good (used), Year of construction: 2010, product length: 600mm - 1300mm product width: 185mm - 400mm Ce3F2A9

Year of construction: 2025, Condition: new, machine/vehicle number: 30632, IDE-o/c 12002675 SINGLE SCREW CO-EXTRUDER MEB 30/5x25D (picture similar, here shown MEB H20/5x25D) - NEW machine from IDE-stock program - international size 1-30-25 - mobile on 4 swivel castors - manual height adjustment +300/-100 mm via threaded spindle - control cabinet integrated in the frame * incl. connection cable 5m long, 32 A CEE - control via PLC Control 20/4 with 7" touch panel * drive on/off * display screw speed * display motor load * heating on/off/lowering value * set value either via touch display or digital potentiometer - emergency stop button on the control cabinet - AC parallel shaft helical geared motor 5.2 kW air-cooled, in Z-design - screw speed max. 88 rpm - screw back pressure max. 300 bar (temporarily 350 bar) - one-piece cylinder (nitrided) with water-cooled feed zone - 3 cylinder heating zones with 3 cooling fans - material hopper, 6 liter volume, fix mounted on barrel - die connection M22x1,5 screw Ø 30 mm x 25 D - Screw for processing PVC-F - screw design acc. to drawing 1258060 - output range 1.5 to 8.0 kg/h, depending on tool back pressure - nitrided and polished, with integrated screw tip - screw take-out to the front (in extrusion direction) 4 additional heating zones - display in extruder control - sockets CEE 230V, temperature probe FeCuNi Typ L - 1 additional heating zone with heater band for union nut Dqj7Wh - 1 additional heating zone for heating hose (without heating hose) - 2 die heating zones, without heating element (as spare) melt pressure and temperature measurement - combination probe ½"-20UNF-2B, cable pluggable - pre-warning 250 bar / shutdown 300 bar - visualization in ME Control 20/4 extruder control

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine Czwvsotjhu

Condition: used, Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine -Edge milling: 0 - 3 mm Pfurkyzr -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Year of construction: 2025, Condition: new, machine/vehicle number: 30630, IDE-o/c 12002673 SINGLE SCREW CO-EXTRUDER MEB 20/5x25D - NEW machine from IDE-stock program - mobile on 4 swivel castors - manual height adjustment +300/-100 mm via threaded spindle - control cabinet integrated in the frame - control via PLC Control 20/4 * operation via 5.7" touch panel * screw on/off * screw speed * screw speed display * display motor load * heating on/off/lowering value - emergency stop button on the control cabinet - incl. connection cable 5 m long with CEE plug 32 A - AC parallel shaft helical geared motor 2.6 kW air-cooled, in Z-design - screw speed max. 92 rpm - screw back pressure max. 300 bar (temporarily 350 bar) - one-piece cylinder (nitrided) with water-cooled feed zone * integrated pressure disc for overpressure protection - 2 cylinder heating zones with 2 cooling fans - die connection M22x1,5 with union nut - 1 additional heating zone with heating band for union nut - 1 additional heating zone for heating hose (without heating hose) - material hopper, 6 liter capacity, fixed on cylinder - 1 additional socket SCHUKO 16A for hopper conveyor screw Ø 20 mm x 25 D - Screw for processing PVC-F - output range 0.5 to 5.0 kg/h, Cfu3Bvkiom depending on tool back pressure - nitrided and polished, with integrated screw tip

Year of construction: 2002, operating hours: 73,587 h, Condition: ready for operation (used), machine/vehicle number: 300, CO-EXTRUDER MEB 38/2 x 25 D - used machine, function tested, ready to use -Chassis with swivelling device and height adjustment - DC drive 5,2 kW - Screw speed approx. 60 min-1 - 1-part cylinder, made of nitrided steel incl. water-cooled inlet zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 connection flange heating zone with controller, switching element and heating element - 1 mould heating zones without heating element - Feed hopper made of V2A * Capacity approx. 12 litres * Sliding mechanism Mould connection - flange system IDE, incl. thread M 30 x1,5 Cfu2D2Uv8C Control cabinet / electrics - permanently attached to the base frame * incl. circuit for bridging short-term power failures Compact control mini ME Control /3 * Mounted in portable housing with 3 m connection cable to the control cabinet - Screw on/off - Screw speed via digital potentiometer - Screw speed display - Motor load display - Heating on/off/lowering value 1x screw Ø 38mm x 25 D - 3 zone screw for processing PVC - Nitrided and polished - Screw tip suitable for mould connection

Year of construction: 2001, operating hours: 55,378 h, Condition: ready for operation (used), machine/vehicle number: 15, SINGLE SCREW EXTRUDER ME90/4 x 25 D Dqj7Vt - used machine, checked and ready for operation - open frame construction with spur gearing and directly flange motor - DC-drive 50 kW - screw speed max. 38 rpm - 1-part cylinder, smooth with water-cooled entryzone - 6 heating and cooling zones - 1 flangeheating zone - 5 die heating zones, without heater - die connection incl. heater band - electrical cabinet mounted on operation side * incl. short interruption device 0,5 sec. - additional Sockets * 1 CEE-socket 5-pole 400V, 32A * 2 Schuko-socket 230V, 16A - temperature controller type KS40, with self-optimisation - operation panel swivelling - melt pressure and -temperature measuring incl. 2 probes 1/2" - 20 UNF - hopper 100L with 3-pos. svievel mechanism - incl. screw for processing PVC-U granule * nitrided , polished and hollow bored - incl. screw tip tempering system * incl. oil tempering unt

Year of construction: 2013, Condition: ready for operation (used), machine/vehicle number: 248, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation Dqj7Wr - mounting platform 3950mm x 700mm - motorized length adjustment 500mm - motorized height adjustment 875 - 1025mm - manuell cross adjustment, 50mm - 2 vacuum pumps - 2 manifold with each: * 20 water connections 1/2" * 20 vacuum connections 1/2"

Year of construction: 1996, Condition: ready for operation (used), machine/vehicle number: 455, HAUL-OFF UNIT ME 30/4 - used machine, checke and ready for operation - 2 DC drives 1,1 kW each - haul-off speed up to 50,0 m/min Dqj7W2 - contact length approx. 800 mm - pneumtic clamping * weight compansation for upper haul-off carrier * compansation tank for pressurized air - 2 haul-off belts 75 mm wide - protection cover mit Folding door, endschaltergesichert, * without inlet protection tunnel - control panel with 12 m connection cable - incl. short interruption device

Year of construction: 1992, Condition: ready for operation (used), machine/vehicle number: 154, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - base frame 3,0m long - mounting platform 2500mm - manuelle length adjustment, with handwheel - manuelle height adjustment, with ratchet - manuell cross adjustment, with hand wheel - 2 vacuum pumps Cfu39O908W - 2 manifold with each: * 10 water connections 1/2" * 10 vacuum connections 1/2"

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90, PUNCHING UNIT ME 41/2 - Used machine, function-tested - Frame l x w 1000 x 600 mm - Height adjustment with spindle - Travelling distance approx. 25 mm, pneumatically supported - pneumatically operated E2Oxdsq - Punching force 1,800 N / at 6 bar - Punching stroke length 10 mm - Punching sequence max. 150 strokes/min - Trigger pulse electrical - Without punching tool - Protective panelling with hinged door Limit-switch protected, without infeed/outfeed protection channel - Removable waste container Length measurement - with contact roller and holder for punching step 64 mm - with contact roller /0 20.38 mm with one switching cam

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 756, PUNCHING UNIT ME 40/6.3 - Used machine, function-tested - Working principle pneumohydraulic - Travelling distance: 200 mm, pneumatically supported - Punching force 24 KN at 6 bar - Punching/power stroke: 50/12 mm (power pack S4.50.12D) - Punching sequence max. strokes/min.: 40 (depending on profile and speed) - End position monitoring by limit switch - Installation dimensions for punching tool: (w x h x l) 180 x 138 x 225 mm - Protective panelling with hinged door, limit switch protected - Without inlet/outlet protection channel - For mounting a column guide frame 350x 250x 250 mm * without column guide frame - without punching tool Gxcciwi - incl. sequence control for external punching release (24V signal, potential-free required)

Year of construction: 1996, Condition: used, Functionality: fully functional, machine/vehicle number: 465, HAUL-OFF UNIT ME 30/4 - used machine, function-tested - Driven by 2 GS motors 0.8 kW each - Pull-off speed 0.5 to 10 m/min - Pull-off force max. 4,500 N - Caterpillar clamping pneumatic, weight compensation of the upper crawler carrier, Equalising tank for the compressed air supply - 2 transport chains 75 mm wide, 23 mm high, hardness approx. 70 Shore A profiled for roller shutter standard profile (smooth segments possible) - Protective panelling, limit switch protected - Control panel with approx. 12 m connection cable - Fixed extrusion height 1100 mm Hu2X2Do Central chain lubrication

Condition: used, Functionality: fully functional, machine/vehicle number: 460, Year of construction: 1997, EXTRUDER ME 45/3x25D - used machine, function tested - DC drive 14 kW - Screw speed 8-85 min-1 - Cylinder, one-piece, with water-cooled feed zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 flange heating zone, incl. heater band - 3 mould heating zones, without heating elements - Three-point temperature controller type KS 40 with digital display, self-optimisation and error message - die connection in special design with external thread M 85 x 2, designed for melt pressure and temperature temperature measurement Mass pressure and temperature measurement - complete with 2 separate measuring probes - digital display units - incl. 2 blanking plugs Hopper - capacity approx. 60 litres - swivelling mechanism 1 Screw ø 45 mm x 25 D - 3-zone screw for processing Polyamide as per drawing 22501850 - Output capacity approx. 8-35 kg/h (depending on mould design) C92L8R3 - Nitrided, polished and hollow drilled - Screw tip suitable for mould connection

Year of construction: 2007, Condition: good (used), Description Brand Eco Refrigerazione Model IDE 43B10 ED ID 555804 Status Active Price 1.300 € + VAT Year of manufacture 2007 Location Oradea (RO) Industrial dual discharge unit cooler Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum airflow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (int./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: -35oC. ExWorks. Price is negotiable. Dwbv8M Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: FH.FNJF-00296 / 1224402827, paper weight (min.): 40 g/m², paper weight (max.): 250 g/m², paper width (min.): 150 mm, paper width (max.): 780 mm, paper height (min.): 180 mm, paper height (max.): 1,200 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum paper format: 780 x 1,200 mm Minimum paper format: approx. 150 x 180 mm Paper weight: 40 - 250 g/m² Maximum mechanical speed: up to 230 m/min Folding types: parallel fold, zigzag fold, altar fold, window fold, etc. EQUIPMENT - 6 folding pockets for versatile folding types - 1 blade for additional folding options - Heidelberg PFH-82 pallet feeder for continuous sheet feed - Steel vertical sheet delivery SBP 66.D-MKE for precise sheet placement - Automatic settings for quick job changes - Touchscreen operation for easy control Drgcyt

Condition: used, Year of construction: 2014, Offset 8 color with coating Heidelberg XL 75-8+LYYLX Anicolor Year: 2014 Cexcmdypam Number of impressions (mio): 85 Machine control - Prinect Axis Control Feeder - PPF Preset Plus feeder - Non-Stop feeder - Anti static device Printing units - Number of printing unit(s): 8 - Straight machine - AutoPlate XL - CombiStar - Automatic blanket washing device - Automatic impression cylinder washing device Coating - Number of coating unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 3 Drying - IR interdeck dryer: 2 - IR + hot-air dryer in delivery: DryStar Combination - UV dryer in delivery: DryStar Combination Delivery - PPD Preset Plus Delivery - Extended delivery: X3 - Powder spray: AP 500 - Anti static device Accessories - AirStar - Cabinets water cooled

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 207817, Anicolor Printing Thickness: 0,6mm +Version CP 2000: Touch Screen Console Straight Machine Alcolor Vario Dampening Grafix Alphatronic 200: Powder Sprayer Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Technotrans CombiStar Compact: Ink Temperature Control ( Air Cooled) Technotrans Cooling Device Dridar Semi Automatic Plate Change Impression Account: 100 Mio.

Condition: ready for operation (used), Heidenhain LE 355 Q control . 238 324 99 SN:2937133 , used, normal signs of wear, 100% functional, scope of delivery as per photos Cj7Gzo2Jwx

Condition: used, Year of construction: 2019, CNC SCM Morbidelli M100  Brand SCM Type Morbidelli M100  Year of construction 2019 Serial number AA100001570 Machining table dimensions 5510x1620 mm (LxW) 400 Volt / 50 Hz PRO-Speed safety system TEPCAD control panel with touchscreen colour display TBR14 linear tool changer (Y=1620 positions) FAST14 linear tool changer Air blower on electro spindle Guard rails X-Y axes Vacuum pump 150/300 m3/h  50/50 Hz 5-axis unit ‘JQX’ version, 13.5 kW Fixed pod 145x145 H=75 mm Rotating pod 145x55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect: 1 year (gateway kit ‘plug&play’ included) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE human-machine interface software (HMI) Maestro software for cnc programming Hardware key for Maestro cnc Advanced Maestro 3D module Additional key for Maestro cnc (USB port) Windows 10 embedded 64-bit operating system Console with integrated PC ‘eye-M PRO’ Axis movement  Maximum vectorial speed in rapid traverse XY axis 56 m/min Stroke of the Z axis 180 mm Routing unit Motor power 5.5 kW  Speed 4000 rpm Tool changer up to 44 locations Drilling unit Individual vertical spindles 21 Individual horizontal spindles 12 Speed 8000 rpm Integrated saw blade diameter 125 mm  Air consumption 4430 m3/h Air speed 25 m/sec Connection diameter 250 mm Total dimensions 9700x5020x2650 (LxWxH) Machine available from 16-04-205 Drh28J - Year: 2019 - Documentation available: No - Serial number: AA10001570 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: reconditioned (used), Year of construction: 1970, Heidenreich & Harbeck Hamburg 840 Condition: Used Year of construction: 1970, geometrically overhauled in 2023 Technical specifications: Swing diameter over bed: 840 mm Swing diameter over cross slide: 520 mm Center distance: 1500 mm Center height: 420 mm Motor power: 11 kW Bed width: 600 mm Spindle bore: 127 mm Longitudinal feeds: 0.08 - 2.8 mm/rev Cross feeds: 0.04 - 1.4 mm/rev Quill stroke: 300 mm Spindle speed: 7.1 - 1400 rpm Weight, approx.: 6500 kg Dimensions, approx.: 4000 x 2200 x 1800 mm Equipment: - Forkardt 3-jaw lathe chuck, D = 400 mm - 3-axis digital readout - Quadruple tool post Scope of partial overhaul: - Machine partially disassembled and repainted - Guideways ground on both sides (Z-axis, Z-axis, and X-axis) - Tailstock sleeve hard-chromed and ground (inside/outside) Cdqbpgpznk - New stainless steel back plate

Condition: used, Year of construction: 2008, Delivery Heidelberg-Stahlfolder TSH 70 Year: 2008 Dnpsgn - Vertical stack delivery with pressing - Twin stack delivery: Spa

Condition: new, Heidenhain EXE 922 Standard . 284807-20 SN:41001419, unused in opened original packaging, 100% functional, scope of delivery as per photos Be28S8Zhi

Condition: used, Year of construction: 2004, Folding machine Heidelberg-Stahlfolder KD 78/6KZRL Year: 2004 Description: - 32 page folder Feeder - Pallet feeder: PD-78 - Pump Folding unit Heidelberg-Stahlfolder KD 78/6KZRL - Parallel fold unit with 6 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left and right - Third cross fold left or right (moveable) Cx82Jugmci - Noise hood over the entire folding section Delivery Heidelberg-Stahlfolder SBP.D-66 + MKE - Horizontal stack delivery with pressing and marking device

Condition: used, Year of construction: 2008, Folding machine Heidelberg-Stahlfolder TH 82/442 Year: 2008 Description: - 16 page folder - Colour monitor with touch screen - Automatic setting Feeder - Round pile feeder - Excluding pump Buckle folding unit: 1 - First buckle folding section with 4 buckle plates Bcvpqylgna - Automatic setting - Perforating shaft - Noise hoods for upper folding buckles Buckle folding unit: 2 - Second buckle folding section with 4 buckle plates - Automatic setting - Perforating shaft Buckle folding unit: 3 - Third buckle folding section with 2 buckle plates - Automatic setting Delivery Heidelberg-Stahlfolder TSH 70 Year: 2008 - Horizontal stack delivery with pressing