Plasma Inverter Cutting System
Hypertherm
Powermax 30 XP
Plasma Inverter Cutting System
Hypertherm
Powermax 30 XP
Fixed price plus VAT
1,090 €
Year of construction
2011
Type of offer
Used
Location
Anton-Böck-Straße 31, 81249 München, DE
Plasma Inverter Cutting System
Hypertherm Powermax 30 XP
MACHINE DATA
- Machine type:
- Plasma Inverter Cutting System
- Manufacturer:
- Hypertherm
- Model:
- Powermax 30 XP
- Year of construction:
- 2011
- Condition:
- good (used)
PRICE & LOCATION
- Price:
- 1,090 € Fixed price plus VAT
- Location:
- Anton-Böck-Straße 31, 81249 München, DE
- Machine for rent:
- is possible
LISTING DETAILS
- Listing ID:
- A593-3581
- Reference number:
- 1342 - 24 21
- Update:
- 27.09.2021
DESCRIPTION
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 30 XP
Machine no. 088075
Supply voltage 1 x 230 Volt
Adjustment range 15 - 30 amps
Duty cycle 20 % ED at 30 amps
Current setting stepless
max. separation cut 16 mm
max. quality cut 10 mm
Cooling inverter by built-in fan
cooling of torch by compressed air
Design portable assembly unit
Fuse protection 16 ampere
Dimensions L x W x H 400 x 190 x 320 mm
Weight 9 kg
Age approx. 10 years
Condition workshop tested, good, incl. UVV test report
Scope of delivery plasma cutting system with the following accessories:
1 piece hand torch 4,5 mtr. long
1 piece ground cable
1 piece operating instructions
Warranty 12 months from date of delivery
Original price 2.060,00 € + tax
Price compl. with above accessories
ex stock Munich 1.090,00 € + VAT
_____
matching:
Carrying case 45,00 € + VAT.
_____
The machine is located in
Wilhelm Merkle Schweisstechnik GmbH
Pgien
Anton-Böck-Strasse 31
81249 Munich
Contact person is Mr. Manuel Maier.
Of course we will send the machine to you for 60,- € by forwarding agency all over Germany.
_____
You can also finance our machine with 0 %!
We offer trial welding, instruction on the equipment and a huge range of accessories.
The advertisement was translated automatically. Translation errors are possible.
Make Hypertherm
Type Powermax 30 XP
Machine no. 088075
Supply voltage 1 x 230 Volt
Adjustment range 15 - 30 amps
Duty cycle 20 % ED at 30 amps
Current setting stepless
max. separation cut 16 mm
max. quality cut 10 mm
Cooling inverter by built-in fan
cooling of torch by compressed air
Design portable assembly unit
Fuse protection 16 ampere
Dimensions L x W x H 400 x 190 x 320 mm
Weight 9 kg
Age approx. 10 years
Condition workshop tested, good, incl. UVV test report
Scope of delivery plasma cutting system with the following accessories:
1 piece hand torch 4,5 mtr. long
1 piece ground cable
1 piece operating instructions
Warranty 12 months from date of delivery
Original price 2.060,00 € + tax
Price compl. with above accessories
ex stock Munich 1.090,00 € + VAT
_____
matching:
Carrying case 45,00 € + VAT.
_____
The machine is located in
Wilhelm Merkle Schweisstechnik GmbH
Pgien
Anton-Böck-Strasse 31
81249 Munich
Contact person is Mr. Manuel Maier.
Of course we will send the machine to you for 60,- € by forwarding agency all over Germany.
_____
You can also finance our machine with 0 %!
We offer trial welding, instruction on the equipment and a huge range of accessories.
The advertisement was translated automatically. Translation errors are possible.
DOCUMENTS
5933581.pdf (PDF)SELLER
Wilhelm Merkle Schweißtechnik GmbH
Contact person: Herr Manuel Maier
Anton-Böck-Straße 31
81249 München, Germany
Registered since: 2016
Die Merkle Schweißtechnik GmbH wurde 1980 in München als Vertriebs- und Serviceniederlassung der Merkle-Schweißmaschinenbau GmbH aus Kötz in Schwaben gegründet, um von München aus die nieder- und oberbayerischen Kunden optimal zu betreuen. Da wir sehr schnell gewachsen sind, wurde 1985 eine weitere Vertriebs- und Serviceniederlassung in Landshut gegründet. 1988 kam dann die nächste in Rosenheim dazu, wodurch die optimalen Bedingungen geschaffen waren, um die Handwerks- und Industriekunden in den Ballungsräumen München, Landshut und Rosenheim und in den umliegenden Gebieten bestens zu betreuen.
Die Vision, neue Märkte zu erobern, hat uns dazu bewogen, den ost- und südeuropäischen Markt genau zu analysieren. Im Jahre 2004 haben wir dann unsere Aktivitäten entsprechend ausgeweitet, sodass wir nunmehr Werksvertretungen in der Tschechischen Republik, in Rumänien, in Serbien, in Kroatien und in Südtirol haben. Dadurch sind wir heute einer der größten schweißtechnischen Händler Bayerns. Durch den Umzug in unser eigenes Gebäude 2008 nach München-Freiham wurde unsere Expansion vorläufig abgeschlossen. Anschließend wurde die Gewichtung auf den Ausbau unserer Serviceleistungen gelegt. Daher können wir heute viele Vorteile bieten.
Die Vision, neue Märkte zu erobern, hat uns dazu bewogen, den ost- und südeuropäischen Markt genau zu analysieren. Im Jahre 2004 haben wir dann unsere Aktivitäten entsprechend ausgeweitet, sodass wir nunmehr Werksvertretungen in der Tschechischen Republik, in Rumänien, in Serbien, in Kroatien und in Südtirol haben. Dadurch sind wir heute einer der größten schweißtechnischen Händler Bayerns. Durch den Umzug in unser eigenes Gebäude 2008 nach München-Freiham wurde unsere Expansion vorläufig abgeschlossen. Anschließend wurde die Gewichtung auf den Ausbau unserer Serviceleistungen gelegt. Daher können wir heute viele Vorteile bieten.
Weitere rechtliche Angaben
Verantwortlich:
Wilhelm Merkle Schweißtechnik GmbH
Anton-Böck-Str. 31
81249 München
Geschäftsführer: Wilhelm Merkle - Siegfried Awissus
Registergericht: München
Registernummer: HRB 61 102
Umsatzsteuer-Identifikationsnummer gemäß § 27 a Umsatzsteuergesetz:
DE129494432
Alle unsere Angebote sind freibleibend und basieren auf unseren allgemeinen Liefer- und Zahlungsbedingungen.
Sollten Sie unsere allgemeinen Liefer- und Zahlungsbedingungen nicht vorliegen haben, so senden wir Ihnen diese auf Anfrage gerne zu.
§ (...) Haftungsausschluss
Das Angebot der Firma Wilhelm Merkle Schweißtechnik GmbH und dieser Website richtet sich ausschließlich an Kunden und Interessenten in folgenden Ländern:
Deutschland und den gesamten deutschsprachigen Raum
alle Länder der EU
alle Beitrittskandidaten der EU
Trotz sorgfältiger inhaltlicher Kontrolle übernehmen wir keine Haftung für die Inhalte externer Links. Für den Inhalt der verlinkten Seiten sind ausschließlich deren Betreiber verantwortlich.
Wilhelm Merkle Schweißtechnik GmbH
Anton-Böck-Str. 31
81249 München
Geschäftsführer: Wilhelm Merkle - Siegfried Awissus
Registergericht: München
Registernummer: HRB 61 102
Umsatzsteuer-Identifikationsnummer gemäß § 27 a Umsatzsteuergesetz:
DE129494432
Alle unsere Angebote sind freibleibend und basieren auf unseren allgemeinen Liefer- und Zahlungsbedingungen.
Sollten Sie unsere allgemeinen Liefer- und Zahlungsbedingungen nicht vorliegen haben, so senden wir Ihnen diese auf Anfrage gerne zu.
§ (...) Haftungsausschluss
Das Angebot der Firma Wilhelm Merkle Schweißtechnik GmbH und dieser Website richtet sich ausschließlich an Kunden und Interessenten in folgenden Ländern:
Deutschland und den gesamten deutschsprachigen Raum
alle Länder der EU
alle Beitrittskandidaten der EU
Trotz sorgfältiger inhaltlicher Kontrolle übernehmen wir keine Haftung für die Inhalte externer Links. Für den Inhalt der verlinkten Seiten sind ausschließlich deren Betreiber verantwortlich.
Send inquiry
TELEPHONE & FAX
Telephone:
+49 89 44369101
Fax: +498989771780
These listings may also fit your interest.
2
München
2021
as good as new (ex-display)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 30 AIR
Supply voltage 1 x 230 Volt
Adjustment range 15 - 30 amps
Duty cycle 20 % ED at 30 amps
Current setting stepless
max. separation cut 16 mm at 125 mm/min
max. quality cut 10 mm at 250 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Execution portable assembly plant
Fuse protection 16 ampere
Ytygvw
Special accessories integrated air compressor
Dimensions L x W x H 420 x 195 x 330 mm
...
3
München
2021
as good as new (ex-display)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 105
Supply voltage 3 x 400 Volt
Adjustment range 30 - 105 amps
Duty cycle 80 % ED at 105 amps
100 % ED at 94 amps
Current setting stepless
max. separation cut 50 mm at 125 mm/min
max. quality cut 32 mm at 500 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Design portable compact unit
Fuse protection 32 Ampere
Special accessories CPC automatic connection
Dimensions L x W x H 590 x 275 x 510 m...
3
München
2021
refurbished (used)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 125
Supply voltage 3 x 400 Volt
Adjustment range 30 - 125 amps
Duty cycle 100 % ED at 125 amps
Current setting stepless
max. separation cut 57 mm at 125 mm/min
max. quality cut 44 mm at 457 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Design portable industrial unit
Fuse protection 32 Ampere
Special accessories CPC automatic connection
Dimensions L x W x H 590 x 275 x 510 mm
Weight with bur...
3
München
2021
as good as new (ex-display)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 85
Supply voltage 3 x 400 Volt
Adjustment range 25 - 85 amps
Duty cycle 60 % ED at 85 amps
3w9t2i8t
100 % ED at 66 amps
Current setting stepless
max. separation cut 38 mm at 125 mm/min
max. quality cut 25 mm at 500 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Design portable compact unit
Fuse protection 32 Ampere
Special accessories CPC automatic connection
Dimensions L x W x H 500 x 234 x...
2
München
2021
as good as new (ex-display)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 65
Supply voltage 3 x 400 Volt
Adjustment range 20 - 65 amps
Duty cycle 50 % ED at 65 amps
100 % ED at 46 amps
Current setting stepless
max. separation cut 32 mm at 125 mm/min
max. quality cut 20 mm at 500 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Design portable compact unit
Fuse protection 16 ampere
Dimensions L x W x H 500 x 235 x 455 mm
Weight with burner 26 kg
Jcuz020kk
Age 6 month...
2
München
2021
as good as new (ex-display)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Bwr0thlxzg
Type Powermax 45 XP
Supply voltage 3 x 400 Volt
Adjustment range 10 - 45 amps
Duty cycle 50 % ED at 45 amps
60 % ED at 41 amps
100 % ED at 32 amps
Current setting stepless
max. separation cut 29 mm at 125 mm/min
max. quality cut 16 mm at 500 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Execution portable assembly plant
Fuse protection 16 ampere
Dimensions L x W x H 445 x 175 x 360 mm
Weigh...
3
München
2021
as good as new (ex-display)
Type of machine Plasma Inverter cutting system
Make Hypertherm
Type Powermax 30 XP
Supply voltage 1 x 230 Volt
Adjustment range 15 - 30 amps
Duty cycle 20 % ED at 30 amps
Current setting stepless
max. separation cut 16 mm at 125 mm/min
max. quality cut 10 mm at 500 mm/min
Cooling inverter by built-in fan
cooling of torch by compressed air
Execution portable assembly plant
Fuse protection 16 ampere
Special accessories Transport case
Dimensions L x W x H 360 x 140 x 305 mm
Weight with burner 10 kg...
7
Erlangen
2018
as good as new (ex-display)
Screw compressor ALMIG BELT XP 30 - 10 bar (air cooled)
Year 2018 / IMMEDIATELY AVAILABLE!
Warranty: 60 months (upon completion ALMiG AIRCARE)
Technical specifications
Type: BELT XP 30
Bdstmhrem2
Operating pressure: 10 bar (ue)
Delivery quantity, according to ISO 1217 Annex C: 4,50 m³ / min
Degree of protection / insulation class drive motor: IP 55 / ISO F
Rated power drive motor: 30 kW
Operating voltage / frequency: 400/50 V / Hz
Sound pressure level (DIN 45635 T.13): 73 dB (A)
Length: 1350 m...
3
Straubenhardt
2021
new
We deliver it to you personally, install, correct and instruct.
We are always available to help you with any questions or problems you may have.
The device is very easy to use without programming knowledge.
- German user software and German user manual
- Fiber laser 30W MAX Photonics
- Wavelength 1064nm
- Marking field size 110 x110mm
- Repeat precision ± 0.003mm
- Engraving speed ≤ 7000 mm/s
- marking software EZCAD in German / English
- simple preview (pilot laser)
- laser class 4
- working t...
6
Brezina 70b, 8250 Brežice, Slovenija
2000
ready for operation (used)
the machine is well preserved and works flawlessly.
table size 1500x3000
Ca9lf8u93o
the machine has an additional head for drilling and threading up to M16
max cutting thickness is 20mm
allows cutting with 3 different amperes
new libellula softwear programming program.
also a suction filter
many consumables (approx. 2000EUR)
contact us for more pictures.
3
SLIDING RACK FOR GLASS M80-30
MANUFACTURED IN 2021/ BRAND NEW
We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards).
We design and manufacture our racks from scratch in Poland.
The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis.
Storage racks consist of sliding and slightly inclined drawers....
7
Diesel Forklift
Capacity: 3000kg
Lift height: 3500mm
Closed height: 2295mm
Mast type: Standard
Fork length: 1200mm
YOM: 2021
Condition: New
Vu0ika
Transmission: Automatik
Bereifung vorne Typ: Super Elastic
Bereifung vorne Zustand: 80 - 100%
Bereifung hinten Typ: Super Elastic
Bereifung hinten Zustand: 80 - 100%
Description: Preis gilt inklusive neuer UVV Prüfung, Gerät ist NEU, Ab Lager lieferbar, Gerne organisieren wir Ihnen einen kostengünstigen Transport,
Side Shift,
3rd valve, 4th valve...
14
Wijchen, Netherlands
(dealership location)
2013
as good as new (ex-display)
Manufacturer + model STILL RX 60-30 * EX * Mitrex - 2G / Zone 1 
Mast 3F4550
ID 21038.7808
d
Mast 3F4550
Lowered height 2200 mm
Lifting height 4550 mm
Capacity 3000 kg
Year 2013
Hours 5702 hours
OptionsCONTAINER specs !!EX - Mitrex !!Systeem = ATEX 94 / 9 / EG
EX II - Cat 2G ( toegestaan in ZONE 1 en 2 )
Gasgroep = IIB
Gytp0w
Temp klasse = T4 - 135 C
6
Product condition: New from old Stock
Piston Diameter: 16 mm
Stroke: 30 mm
Pressure (pmax): 0,15 ... 0,7 MPa
Case: very good, no scratches
B9amikq8hp
Guarantee in months: 12
Item No.: MXP16-30
7
Kaiserslautern, Germany
(dealership location)
2015
ready for operation (used)
Control Unit
Brand Euromac
Additional Equipment
Caxbooxr3z
FLEX: servomotor-controlled hydraulic system
Programmable adjustment of punch stroke, speed, acceleration and dwell time
This Euromac STX Plus 1250/30-2500 Flex 12 Hybrid Punching machine was made in 2015. The machine is controlled by a control unit of the same brand and includes an external cooling system as well as an external control station.
Application Types
Punching
4
Marciano
ready for operation (used)
PLASMA CR ELECTRONIC
Mod. 6000x2000 HYPERTHERM HD3070
Mobile cowl
Complete with filtrating system
Generator Hypertherm hd 3070
B9ki0eozfv
Completely revised 2021
4
The Vacomat 300 XP large dust extractor is the ideal dust extraction system for multi-machine extraction. Airflows of up to 6,000 m³/h are possible with this clean air extraction system, making it also interesting for CNC machines or wide belt sanders.
B2pwua9ce9
The standard Vacomat 300 XP comes with an automatic controller to ensure that the powerful extraction system is not forgotten or run at no load. If an attached machine is turned on, the dust extractor fan starts automatically, causing ...
10
Yerville
2000
repair required (used)
DUMOULIN sugar coating turbine
for small batches or for development.
2 pans sold with the machine: 15 and 30kg
CIP system
Jv93uguf
Waston Marlow perilstatic pump
Sold without its power cabinets, fan and filtration system
4
Bakkeveen
2021
new
The machine that cuts out defects, cuts to length and endmatches
The Powermax Endmatcher can be used for several purposes varying from hardwood/softwood parquet floor boards to softwood wall and ceiling paneling.
Defecting, cutting to length and endmatching in 1 machine!
One of the unique features of the Powermax Endmatcher is its production speed. The standard model of the Powermax Endmatcher can produce up to 24 planks per minute!
The Powermax Endmatcher is thus the fastest Defecting & Endm...
3
Radomsko
as good as new (ex-display)
Plasma generator new propokazowy - very good condition Made in USA. Possible shipping or personal collection from Radomsko. Only the plasma unit without the torch and cables.
New, pro-demonstration plasma unit - very good condition Made in the USA. Possible shipping or pick-up from Radomsko. Only the plasma aggregate! - without gas console and without plasma torch.
Ovqvn
6
turning diameter over bed: 1040 mm
turning diameter over support: 720 mm
centre distance: 5400 mm
center height over bed: 540 mm
control: Siemens 828D
turning dia. in gap: 1300 mm
length of gap: 640 mm
spindle bore: 152 mm
revolution per minute: 3,5...1000/ 4 steps U/min
feed:: x-Achse: 37,24 (m/min) m/min
feed:: z-Achse: 21,91 (m/min) m/min
power feed longitudinal: x-Achse: 6,44 (KN) KN
feed capacity Z - max.: 17,2 (KN) KN
tailstock taper MT: MK 6
tailstock quill stroke: 300 mm
total power req...
6
Cam-operated rotary indexing table make EXPERT type E 19/0030/4
machine. # 4806 with 4 stations, Advantage: The 4 stations are approached
and softly approached. The division cannot be changed.
be changed. One can let the table run all around, but it always stops
always at the 4 stations briefly,
Technical data:
Turntable diameter 1350 mm
V9vkcd0ls
table height 820 mm
inner bore 90 mm
max. load 1 t
outer diameter 1500 mm
with
- ball bearing slewing ring
- Index drive
- without motor
very little...
1
Mannheim
refurbished (used)
COPIERS / PRINTERS / COLOR / BLACK&WHITE / A3 / A4 FOR INTERNATIONAL EXPORT
We have a large number of different manufacturer models such as Kyocera, Canon, Samsung, Utax, Sharp, Konica Minolta etc. for export. The devices are professionally checked, maintained, tested for quality and functionality and cleaned by us.
_ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
You are welcome to visit us in our warehouse in Mannheim and choose the ...
7
Freiberg am Neckar
2004
excellent (used)
Dear interested parties
Bxmc0jlee
We offer here a turntable from SOPAP.
The turntable has a diameter of 600mm.
6
Trittau, Germany
(dealership location)
2012
used
pressure 321 kN
total stroke 200 mm
air pressure 0,3/0,6 MPa 3/6bar
stroke 10 mm
weight 2500 kg
B0nodlzk7v
*** Subject to changes and errors in the technical data and information as well
as prior sale! **
Diesel Forklift
Capacity: 3000kg
Load Centre: 500
Lift height: 4700mm
Closed height: 2145mm
Overall weight: 4850kg
Mast type: Triplex
B9jqkbjhho
YOM: 2021
Condition: New
Transmission: Wandler
Engine: Kubota
Bereifung vorne Typ: Super Elastic
Bereifung vorne Zustand: 80 - 100%
Bereifung hinten Typ: Super Elastic
Bereifung hinten Zustand: 60 - 80%
Side Shift,
3rd valve, 4th valve, Weatherproof cover,
4
Sterilization retort designed for all food products, whether rigid containers (cans, jars) or flexible packaging (doypacks, pouches, trays). Features a choice of steam/air or water-spray processing with overpressure.
4 trolley size.
Include 10 sets of trolley, and 30 separators.
Qmz2f
13
Seesen, Germany
(dealership location)
new
9
Kaiserslautern, Germany
(dealership location)
2007
ready for operation (used)
Table
Outer length 3000 mm
Outer width 1500 mm
Table
Outer length 3000 mm
Outer width 1500 mm
This Bystronic ByJet Pro 3015 Expert ST Waterjet cutting machine was manufactured in the year 2007. The machine has a cutting pressure of 3600 bar and is in good condition and well maintained.
U39jkuu
Application Types
Water Cutting
15
Korschenbroich
1996
used
15
Langenhagen, Germany
(dealership location)
new
15
Horn-Bad Meinberg, Germany
(dealership location)
new
14
Cardito - Na, Italy
(dealership location)
2017
used
6
Bad Arolsen
2022
new
6
Traces of use: No traces of usage bis Slight traces of usage
Guarantee in months: 12
Product condition: New from old Stock
Piston Diameter: 45 mm
Piston Rod Type: Single-ended piston rod
Hdtethd
Case: very good, no scratches
Item No.: 15.30.100.06D
15
15
Machine type: CTP system
Z09fvxg2
Year of construction: 2012
CTP-system Luescher
Location: Germany
Condition: good
Available: now
consisting of:
2 x X-Pose! 230 UV 96 High Power Laserdiods,
including control processor
HAASE OE 46 FU CTP-plate developer, negative
NELA Plate-Automation
Catalog No. : 5422
Type: ML3015eX PLUS
Producer: Mitsubishi
Made in: 2017
Characteristic:
Bxspe7qoce
Control system: MITSUBISHI M 700
Software: Lantech
Total hours: 21480 h
Cutting Hours: 1480 h
Laser power: 4.5 kW
Maximum table load (evenly distributed): 930 kg
Travel length X-axis: 3100 mm
Travel length Y-axis: 1565 mm
Travel length Z-axis: 150 mm
Head size: 7.5
Machine length: 10210 mm
Machine width: 3130 mm
Machine weight: 10700 kg
5
Gera, Germany
(dealership location)
new
4
15
