HYDRAULIC HOT PRESS

Hoefer Expert H120S

Condition: used, overall weight: 30,000 kg, maximum load weight: 23,000 kg, axle configuration: 3 axles, loading space length: 8,450 mm, loading space width: 2,550 mm, loading space height: 860 mm, first registration: 09/2023, Year of construction: 2023, total width: 2,550 mm, total height: 860 mm, Equipment: ABS, * Mileage approx. 9000 km * Total length in the train shown 18.75 m * Dimension a: 8,450 mm * Dimension b: 10,000 mm * Length according to approval T1 10,050 mm * Vehicle width 2550 mm to 3000 mm * Towing device: drawbar length 1500 mm * Eyelet diameter d = 50 mm * Height offset 250 mm * Height adjustment device * Trailer height 825 mm * Axle load 10,000 kg technically permissible axle load 11,200 kg * Permissible GG. 30,000 kg technically permissible permissible GG 33600 kg * Own weight 7000 kg * Payload 26,600 kg * Loading area 5700x2550 mm * Loading height 860 mm * Chassis: wheelbase 4,440/1,310 mm * Twin tires Michelin 245/70R17.5 * Rigid axles BPW Eco * Air suspension with 200 mm lift * Driving height 860 mm +120 mm/-80 mm * Chassis rear overhang 1460 mm---- * One-piece ramps 2850x720 mm * Max. load capacity per pair 50,000 kg * Manually movable * Max. external width 2,780 mm Dqqvwn * Min. internal clearance 472 mm * Hydraulic lifting mechanism. left in direction of travel * Integrated mechanical lock in the ramp lifting cylinder to secure the ramp in transport position * Bracket for rotating beacon * hydr. Hand emergency pump * Flow divider for increased tractor output up to 120l/min * Paintwork in jet black RAL 9005 * Larch floor covering (wood overhang over loading area) * Aluminum lid for storage space on crank with twist lock * Stake pocket strip on the front of the crank 4 pieces 100 mm x 50 mm * Warning signs on the front and rear area Warning signs 423 x 4230 mm with LED position lights, foldable Incl. holder for warning signs for max. width 3,000 mm * Loading area continuous over chassis (5700x2550 mm) * Loading area height when loaded 860 mm * 2 plastic tool boxes 600x300x600 mm * 1 spare wheel holder including complete wheel * Widening by 220 mm each * foldable including widening planks made of larch 45 mm * Holder for widening planks under the loading area * Excavator trough 1600 mm long and 740 mm wide * Brake connection to towing vehicle Duomatic * Trailer information module from Knor (mileage, aggregate load display/axle load display, EBS diagnosis, German language) * Chassis rear: Beveled design (800 mm long, 10 degree beveled) 1460 mm overhang from the middle of the last axle mechanical. * Foldable supports for support during loading * Load securing through numerous lashing points and stake pockets including stakes (8 pieces 1,180 mm high above loading area 1000 mm) and holes for attaching load jacks type VLBG 1 (LC 2000) * Rims painted in jet black * Work lights between the axles controlled by switches on the towing vehicle * and much more * !!! Errors, changes and prior sale reserved!!!

Condition: used, overall weight: 44,800 kg, maximum load weight: 35,900 kg, first registration: 03/2023, Year of construction: 2023, Equipment: ABS, Internal vehicle number: G200194 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at: * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English) Uasbxtrca   GOLDHOFER TU4 EXPERT 4870 Hydraulic ramps Hydraulic supports BPW axles Odometer   Financing example: * Internal number: G200194 * Purchase price: ¤68,900.00 * Down payment: 10% * Term: 60 * Monthly rate: ¤1,079.14 Residual value: ¤13,780.00 ¤ If you like the offer or want to adapt it to your needs, please contact us at Mr. Enchev. We look forward to your call     Subject to errors   We are happy to accept your used vehicle as payment. Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, Used long-belt sander Including many sanding belts Drg8Pf Available from Sielenbach Price ex-works, freight included

Condition: used, No. 3165 Dphxe7 Glue spreader HÖFER LA 1500 Used Mobile machine 2 rubberized rollers 1500 mm length Rubber coating in very good condition Passage height 100 mm Drive approx. 1 kW Electric connection cable with plug Transport dimensions approx. 2000 x 900 x 1600 mm LWH Weight approx. 350 kg Sale on behalf of the customer, ex location Berlin, without disassembly, without transportation and assembly Errors in description and price excepted Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1985, Zwei-Seiten-KantenschleifmaschineSchleifhöhe bis 200 mmBandabmessung : 3000 x 200 mmBandgeschwindigkeit : 22 m/secvorderer Schleiftisch 900 x 400 mm pneumatisch schwenkbar ( bis 45° ) rückwärtiger Schleiftisch 1170 x 400 mm mit Furnierkantenschleifeinrichtung mit Gehrungsanschlagmit FahrwerkMotor 4.0 kWBetriebsdruck .: 5 - 6 barmit separaten Auflagetisch an der UmlenkwalzeOszillationpneumatische Bandspannungschwenkbares Bedienpultregelbare Bandspannung mit Pneumatikzylinderpneumatische Bandträgerhöhenverstellung über KnopfdruckAbsaugung rechts/links über Exhaustermotor , Stutzen 140 mmMaße. : 1800 x 1200 x 1700 mmGewicht : ca. 450 . : 85099 Drgyzj Lagerort: Nattheim

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Fzgvbko

Condition: new, Year of construction: 2020, The machine that makes veneer pliable and supple for a variety of applications. Before the veneer is put through the flexer, it must be pre-treated. In both the temperature and pressure preliminary treatment, the backer is applied to the veneer. The properties of the veneer are changed without influencing the appearance of the veneer. Un3Hc Due to the change in structure, post-forming quality can be achieved. This veneer can be wrapped around tight bends without splitting or cracking. A multi-head flexer, which increases the yield, has been designed especially for serial production. Electromotoric roller-height-adjustment and digital position display.

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! Drdtht • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Pitch 32 mm Working width 672 mm Boring depth max. 90 mm Machines from window manufacturing companies are no longer needed. Can be purchased cheaply directly from the customer Machines still in use and can be viewed ----- Item 1 Jago hole rows & dowel drilling machine Pivoting drilling beam 21 drills 23 mm pitch max drilling depth 90mm Price ex location: 2,000.00 euros ----- Item 2 Höfer belt sander Size of sanding table: 2500 x 1200 Price ex location: 1,500.00 euros ----- Item 3 Stegherr FD window dowel drilling machine Drilling lengthways & frontally 1 drilling head for automatic setting of various drilling patterns Price ex location: 2,000.00 euros ----- Item 4 Ayen olive drilling machine 1 olive drilling head Price ex location: 500.00 Euro ----- Item 5. Drying chamber, self-made 5m wood length, electric Price ex location: 500.00 euros ----- (technical data according to manufacturer - no guarantee!) Drdcvj

Condition: used, Good working long belt sander. Possibly part of a complete slat production line Drduy9

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, total length: 8,000 mm, total width: 5,600 mm, water pressure: 4,000 bar, overall weight: 2,000 kg, working width: 2,000 mm, outer dimension length: 5,000 mm, continuous operating pressure: 3,800 bar, High-pressure water jet system from Cut Expert Variojet for sale. Bsresvtyh8 The system is supplied via a hydraulic pressure intensifier from Uhde. Both units are fully functional. Various spare parts available. Disassembly is required by the buyer/collector.

Year of construction: 2016, operating hours: 1,386 h, Condition: good (used), machine/vehicle number: 201608-008, Multi-functional CAM cutting system using pure-waterjet cutting technology - without abrasive (Water jet cutting system) 1 cutting bridge and 1 cutting head for the 2D cutting of foam, plastic and other flat, flexible, non-metallic materials. Puc37Q Maximum passage height: 140 mm Cutting area in X and Y: 1.60 m * 1.20 m (Product photo as example)

Condition: as good as new (ex-display), Year of construction: 2025, - working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - pressure force: 650 to 3500 dN [kg] / pressure wall - intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions Bnpskmf9G7 - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Drdsfh Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Year of construction: 2001, Condition: ready for operation (used), Working surface: 2150x1150mm, pressing height: 300mm, pressing force: 50t, connected load: 2.4kW, length: 2500mm, width: 1150mm, weight: 1.8t. B7I3Zfugb9

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202008-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 B7Njpizs incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, Year of construction: 2025, - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable Dputteabw - Max. pressure 3500 dN [kg] / pressure wall - Safety line

Condition: reconditioned (used), Year of construction: 1995, Pressing force [dN, kg] 650 - 3500 Maximum usable size [mm] 2500 x 1400 x 700 Minimum usable size [mm] 150 x 150 x 150 Travel speed [mm/sec.] 25 / 50 Working height [mm] 350 Total weight [kg] 2600 Connected load [kW] 5 Rated current at 400 V / 50 Hz [A] 10 Space requirement (l x w x h) [mm] 4600 x 850 x 2350 Drive via 4 ball screws Synchronous pressing process via proximity switch Manual control via control switch for 8 movement functions Independent pressure adjustment of horizontal and vertical pressing pressure Pressing force infinitely adjustable from 650 to 3500 kg per pressure wall Automatic opening Safety rip cord Machine feet CE Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! 8Tmvczmu - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible. Isubjdy

Year of construction: 2024, operating hours: 15 h, Condition: new, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools Bxrujdy3 • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2025, - Fast traverse speed - 200 mm/sec. - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls Cjydewk - driven via 8 BALL ROTATING SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Automatic opening after expired timer - Pressure adjustment infinitely variable - Max. pressure 3500 dN [kg] / pressure wall - Safety line - Air jets in machine base - Layout-table - Combined set-up station/discharge roller way -

Condition: new, Year of construction: 2024, operating hours: 35 h, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Mu3Vqs Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2025, Economic and flexible – a self-adjusting case clamp that can cope with the constricted requirements of continuous line production. The feed-through case clamp KOPMATIK will help you reduce the cost and time spent on set-up and adjustments. The workpiece is scanned visually and the machine will adjust itself automatically. Only pressing time and pressure have to be determined by the operator. P9Ca0Vo2A The base frame is made of solid rolling-profiles Pressing force from 200 kg bis zu 3500 kg Adjustment speed max. 200 mm/sec The horizontal pressure element is a sturdy table construction The frame of the vertical pressure beam is made of thick steel tubes Central pressure element for vertical pressure beam (additional accessory) The control unit is a PLC Siemens, series S7-300

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 3394, - 3700 mm cutting length - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam - fence - pneumatically adjustable (autom. activated) Btet03Sd - Touch panel - Front support table, pneum. adjustable - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: new, Year of construction: 2025, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be lifted and lowered pneumatically + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment M9Ejmoeww