Veneer Flexer FLX

Hoefer Presstechnik Furnierflexer-FLX 260

Condition: as good as new (ex-display), Year of construction: 2025, - working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - pressure force: 650 to 3500 dN [kg] / pressure wall - intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm Bnpskmf9G7 - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 3394, - 3700 mm cutting length - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam Btet03Sd - fence - pneumatically adjustable (autom. activated) - Touch panel - Front support table, pneum. adjustable - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: new, Year of construction: 2025, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be lifted and lowered pneumatically + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact M9Ejmoeww + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment

Condition: new, Year of construction: 2025, The increased income significantly shortened the planned amortisation time. According to our satisfied customer, this investment – a large one by its standards – was one of its very best decisions. 3-fold capacity increase as compared to conventional production methods with veneer presses Adaptation of the plant to the customer specifications Best ergonomic design Goupbt7 Pilot laser systems ease placing the boards Fully-automatic measuring of the components and cylinder shutoff

Condition: new, Year of construction: 2025, Sample - production on customerdemand: Press area: 3500 x 1350 mm No. of cylilnders: 8 pcs. Diameter of cylinders 85 mm Specific pressure: 3,4 kg/cm² (with 350 bar), based on 80 % of the press area Press force: 16 - 160 TO Max. operating temperatur: 120°C Heating power: 230/400 V, 12,7 kW / heating plate, separately adjustable Stroke / opening: 400 mm Closing / opening speed: approx. 20 mm/sec Fnyexv9Wy Working height: ~900 mm Belt speed: max. 15 m/min

Condition: new, Year of construction: 2025, - Saw unit 2.2 kW (3 HP) - Milling unit 1,1 kW Panabh - Sawing length 3700 mm - Double high-grade LM-linear guides - Mechanic axial saw blade adjustment 0 – 2 mm infinitely variable - Power supply in cable duct with plastic link track - Cutting height 45 mm - Safety equipment

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN - Stroke/opening: 400 mm - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz - 34 A, 18 kW Cf32Wdj07S - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN - Stroke/opening: 400 mm - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm Hcvtih - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz - 34 A, 18 kW - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN - Stroke/opening: 400 mm - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system Zawy0Lgx - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz - 34 A, 18 kW - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Condition: like new (used), Year of construction: 2022, The hydraulic press was built in 2022 and is in excellent condition. Not only does it offer the reliable performance and precision you expect from a high-quality press, but also the flexibility to mount various tools and plates (heating plates, wear plates, etc.) as needed. The robust base frame made of heavy steel plates ensures stability and longevity, while the hydraulic unit with servo-hydraulics and frequency converter ensures optimal performance and energy efficiency. Ideal for various applications in wood, composite or plastic processing. Rtf20Hipql • Pressing pressure: 8 - 80 to ≙ 80 - 800 kN • Press stroke: 550 mm • Opening: 800mm • Base plate size (press plates): 900 x 700 mm • Tool clamping surface, tool base plate: approx. 800 x 400 mm • Working height of the press: 775 mm • Machine structure: top pressure press • Version: Column press 4x Ø100 mm • Passage width (clear width between the columns): approx. 1,050 x 650 mm • Weight of the press: approx. 4,000 kg • Space requirement for the system (press, hydraulics, control cabinet): approx. 3,000 x 2,000 x 3,000 mm • Hydraulic cylinders: 2 pieces Ø140/80 mm; Made by Höfer • Closing speed: 13 – 70 mm/s • Pressing speed: 0.5 – 3 mm/s • Opening speed: max. 100 mm/s • Hydraulic power: 7.5 kW • Hydraulic components: Hawe, Dorninger, Parker, Sun, … • Length measuring rod on the press bear for position measurement • Pressure sensor for measuring hydraulic pressure • Electrical temperature and level monitoring in the hydraulic tank • Electrical components mainly Siemens (contactors, circuit breakers, ...) • Operating voltage 3x400 VAC, ~3, PEN • Control and valve voltage: 24 VDC • PLC make Siemens series S7 – 1500; fail-safe CPU • I/O system, Siemens ET200SP • Profinet bus system; Clamps made by Weidmüller • Siemens input device 9“ touch panel, TP900 for entering the production parameters • Manual / automatic operation • Recipes can be created and saved: o Press parameters (press pressure, position, speeds and time). o Enter the switching points for the different closing speeds, input in % o 5 parameter sets can be entered • Clear programming of the user interface • Emergency stop button on the control point • Maintenance bolt for securing the press bear in the top dead center (maintenance tool change position) • Light protection grille at the front, 3 additional sides grilled

Condition: used, Used long-belt sander Including many sanding belts Available from Sielenbach Drg8Pf Price ex-works, freight included

Condition: used, No. 3165 Glue spreader HÖFER LA 1500 Used Dphxe7 Mobile machine 2 rubberized rollers 1500 mm length Rubber coating in very good condition Passage height 100 mm Drive approx. 1 kW Electric connection cable with plug Transport dimensions approx. 2000 x 900 x 1600 mm LWH Weight approx. 350 kg Sale on behalf of the customer, ex location Berlin, without disassembly, without transportation and assembly Errors in description and price excepted Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1985, Zwei-Seiten-KantenschleifmaschineSchleifhöhe bis 200 mmBandabmessung : 3000 x 200 mmBandgeschwindigkeit : 22 m/secvorderer Schleiftisch 900 x 400 mm pneumatisch schwenkbar ( bis 45° ) rückwärtiger Schleiftisch 1170 x 400 mm mit Furnierkantenschleifeinrichtung mit Gehrungsanschlagmit FahrwerkMotor 4.0 kWBetriebsdruck .: 5 - 6 barmit separaten Auflagetisch an der UmlenkwalzeOszillationpneumatische Bandspannungschwenkbares Bedienpultregelbare Bandspannung mit Pneumatikzylinderpneumatische Bandträgerhöhenverstellung über KnopfdruckAbsaugung rechts/links über Exhaustermotor , Stutzen 140 mmMaße. : 1800 x 1200 x 1700 mmGewicht : ca. 450 . : 85099 Drgyzj Lagerort: Nattheim

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Fzgvbko cutting length 3100 mm with rear fence

Condition: new, Year of construction: 2025, • 1200 kN (120 tons) total pressure • pressing-area 3000 x 1350 mm • 7" Touchscreen • with patented, thermostable electro-heating plates with automatic temperature adjustment unit Vtqrns9O • connected load of the heating plates economy circuit 10,6 kW • connected load hydraulic 2,2 kW • 6 cylinders Ø 85 mm • lockable main switch • push button controlls • stop button • safety lines • timer with lifting automatic and acoustic signal • infinitly variable stroke adjustment • 2-stage hydraulic with automatic pressure re-adjustment • compact hydraulic unit, located in oil-tank (maintenance free) • teflonbronce guides in cylinders • chromium plated steel pistons • heavy duty gear rack balance for synchronized table movements • open to all 4 sides • stroke = opening 400 mm • economy setting included in standard production line

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Drdtht Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Pitch 32 mm Working width 672 mm Boring depth max. 90 mm Machines from window manufacturing companies are no longer needed. Can be Drdcvj purchased cheaply directly from the customer Machines still in use and can be viewed ----- Item 1 Jago hole rows & dowel drilling machine Pivoting drilling beam 21 drills 23 mm pitch max drilling depth 90mm Price ex location: 2,000.00 euros ----- Item 2 Höfer belt sander Size of sanding table: 2500 x 1200 Price ex location: 1,500.00 euros ----- Item 3 Stegherr FD window dowel drilling machine Drilling lengthways & frontally 1 drilling head for automatic setting of various drilling patterns Price ex location: 2,000.00 euros ----- Item 4 Ayen olive drilling machine 1 olive drilling head Price ex location: 500.00 Euro ----- Item 5. Drying chamber, self-made 5m wood length, electric Price ex location: 500.00 euros ----- (technical data according to manufacturer - no guarantee!)

Condition: excellent (used), Catalog number 7384 Brr8Gq0Uu8 TECHNICAL DATA - track width 260mm - shaft width 230mm - shaft diameter 60mm - max cutting height 100mm - max disc diameter 350mm (300mm installed) 300mm from above: - 2 rows of pawls - smooth pressure, sliding shaft - shaft with saws - 2 smooth pressure, sliding shafts from below: - guide - pawls, track - 2 types of feed speed + smooth - main engine 15kW - feed engine 0.8kW - central lubrication - table dimensions L/W 1420x670mm - dimensions L/W/H 1800x1400x1700mm, weight about 1500kg ADVANTAGES – Italian production – used multisaw, very good condition Net price: PLN 27,900 Net price: EUR 6,560 depending on the price of EUR 4.25 (Prices may vary with higher fluctuations)

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, . Total length = 3500 mm Drbxx2 Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . .

Condition: used, Good working long belt sander. Drduy9 Possibly part of a complete slat production line

Condition: new, Year of construction: 2025, - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm Dputteabw - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable - Max. pressure 3500 dN [kg] / pressure wall - Safety line

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Drdsfh Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Year of construction: 2023, Condition: as good as new (ex-display), 2 pieces New in stock, new machine guarantee, available for immediate delivery With safety system for solvent-based substances in accordance with DIN 1539. We build suitable loading trolleys. Talk to us! -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Contents 1500 liters -Tmax 260°C Fzcqsow -Controller P570/ 50 programs with 40 segments each, freely programmable -NtLog for controller recording of data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connection power 39 KW -Dependent weight 1150 kg -incl. Documentation, CE declaration We are happy to offer installation and commissioning. Visits to our warehouse by arrangement. We have new and used industrial furnaces. Talk to us! Furnace, ovens, drying furnace, firing furnace, heating furnace, heating cabinet, industrial furnace Tempering furnace, heating furnace, tempering furnace, drying cabinet, chamber furnace, baking furnace, circulating air drying cabinet, circulating air furnace, solvent furnace

Condition: new, Year of construction: 2025, - Fast traverse speed - 200 mm/sec. - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 8 BALL ROTATING SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Automatic opening after expired timer - Pressure adjustment infinitely variable - Max. pressure 3500 dN [kg] / pressure wall - Safety line - Air jets in machine base - Layout-table - Combined set-up station/discharge roller way Cjydewk -

Condition: new, Year of construction: 2025, Economic and flexible – a self-adjusting case clamp that can cope with the constricted requirements of continuous line production. The feed-through case clamp KOPMATIK will help you reduce the cost and time spent on set-up and adjustments. The workpiece is scanned visually and the machine will adjust itself automatically. Only pressing time and pressure have to be determined by the operator. The base frame is made of solid rolling-profiles Pressing force from 200 kg bis zu 3500 kg Adjustment speed max. 200 mm/sec The horizontal pressure element is a sturdy table construction The frame of the vertical pressure beam is made of thick steel tubes Central pressure element for vertical pressure beam (additional accessory) The control unit is a PLC Siemens, series S7-300 P9Ca0Vo2A