Drum motor

Himmelwerk DMot 2Ug 177/200

Condition: used, Electric motor, three-phase motor -Power: 3.7 kW -Speed: 2900 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: -Price: per piece Ielhcscnf Hfodwvoar -Number: 1x available -Dimensions: 460/320/H285 -Weight: 55 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting Iolhcdwewc Rk Eevjar No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, Machine is located in a warehouse Prishtina, Kosovo, ready for testing fully mount. Machine is in good working condition. New rollers mounted in 2022. Iaelhcjwcqqljdwvjr

Year of construction: 2000, Condition: used, Punching machine Iajlhcog Dgyxjdwver Noble HM 35/350 BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: excellent (used), CATALOGUE NUMBER 7615 Technical data: - inlet width 550mm - inlet height 200mm - shaft width 570mm - knife length 570mm - number of knives 2pcs - sieve dimensions 60x120mm - toothed pulling shaft, divided from the bottom - lower shaft motor 2.5kW - toothed pulling shaft from the top Iaelhcswa Al Nodwvor - upper shaft motor 2.5kW - vibrating chute 2.2kW - vibrating chute length 3200mm - vibrating chute width 490mm - main motor 45kW - auto reverse - reverse gear - exhaust port diameter 250mm - overall machine dimensions length/width/height 2100x2000x1100mm - total dimensions of the vibrating chute length/width/height 3200x700x600mm - weight about 3500kg ADVANTAGES - wide inlet opening - auto reverse - reverse gear - used chipper, very good condition Net price: PLN 119,900 Net price: EUR 28,200 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2025, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! Iaslhcswcav Rjdwver FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: excellent (used), Stair Tensioner (28366) Iaolhcdjln Ulaewver Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Year of construction: 2011, Condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw Iaslhcdevu Hvpswvjr fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Condition: new, Year of construction: 2025, Contact Us 24/7 for 200-Ton Cement Silos for Sale Cqdntkxzus Designed to meet the needs of your business, our CS-200 model offers an impressive storage solution with its 200-ton capacity. With a height of 18,360 mm and a diameter of 4,100 mm, it provides a large storage area. This silo stands out for its durable construction, weighing 14,800 kg and featuring a body made of ST-37 steel, ensuring long-lasting security. The silo legs are made from 200 x 2 mm rectangular iron and 20 mm metal plates, supported by NPL 80 mm angle iron. The structural integrity is guaranteed by the use of 140 mm steel C-channel and ST-37 8 mm metal plates for the conical section support material. The product is equipped with a 4" steel charging pipe extending to the silo leg and a maintenance platform. Features such as internal hatches and external manholes provide ease of use. The silo roof offers a complete structure, including guards. The production process is conducted according to structural analysis and approved project specifications, reinforcing the quality and safety of the product. Our CS-200 model is coated with 1 layer of anti-corrosive paint and 2 layers of topcoat epoxy paint, with a total paint thickness of 140 microns, providing superior protection against external factors. This silo is ideal for optimizing your workflow while reducing costs in the long term. With high-quality materials and an engineering marvel design, the CS-200 will be a reliable part of your business. Technical Specifications of the CS-200 - 200 Ton Cement Silo Silo Capacity: 200 tons, 153 m³ (1.3 ton/m³ cement density) Silo Height: 18,360 mm Silo Diameter: Ø 4,100 mm Number of Silo Legs: 4 Silo Discharge Diameter: Ø 300 mm Number of Components: 150 Silo Weight: 14,800 kg Silo Leg Material: 200 x 2 mm rectangular iron Silo Leg Supports: NPL 80 mm angle iron Ijlhsufluaocdwvjar Silo Leg Plates: 20 mm metal sheet Conical Section Support Material: 140 mm steel C-channel Conical Section Material: ST-37, 8 mm metal sheet Silo Body Material: ST-37, 5 and 6 mm metal sheets Silo Top Cover Material: ST-37, 4 mm metal sheet Charging Pipe: 4" steel pipe extending to the silo leg Internal Hatch: Present External Manhole: Present Silo Roof Guards: Included Maintenance Platform: Present Structural Analysis: Conducted for Silos, Production Based on Approved Project Specifications Painting: 1 layer of anti-corrosive paint, 2 layers of topcoat epoxy paint, total paint thickness 140 microns

Condition: ready for operation (used), Flat engine Circular saw motor Iaolspq Ihxshcdwver Chipper motor EKE-Erding 7.7 kW / 2900 rpm / 50 Hz 790 EUR/PC MIMMEL 3.7 kW / 2900 rpm / 50 Hz 450 EUR/PC

Condition: excellent (used), CATALOGUE NUMBER 6911 TECHNICAL DATA - track width 350mm - shaft width 370mm - max cutting height 200mm - max disc diameter: - on the upper shaft 340mm - on the lower shaft 300mm - disc hole diameter 80mm from above: - deflectors - 2 sliding pressing shafts - pressure - shaft with 37kW saws - 2 smooth sliding shafts from below: - feed table + guide strip - deflectors - track - shaft with 37kW saws - track - 1 sliding, smooth, output shaft - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up/down 1.1kW - automatic central lubrication - electrically adjustable smooth regulation of feed speed 3kW - diameter of exhaust port 230mm, 250mm - dimensions length/width/height 3000x2300x1900mm - weight about 5000kg ADVANTAGES - Italian production - two-shaft - used multi-saw, very good condition Iaelhcdwekyr H Aover Net price: 178900PLN Net price: 42100 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: new, Year of construction: 2025, Our stationary crushing and screening plant, with a capacity of 200-350 tons per hour, consists of a 30 m³ vibrating feeding bunker, mid-screen, CLK-110 jaw crusher, cone crusher, vertical shaft impact crusher, stock and return conveyors, control cabin, and automation system. Products transferred to the feeding bunker are separated from dirt and mud using the intermediate screen and are bypassed with a bypass conveyor. The material above the screen goes to the jaw crusher, while the products on the second level drop onto the jaw discharge conveyor, and the products on the lowest level are discarded as bypass. The jaw crusher has a maximum feeding capacity of 800 mm and crushes the products, which first go to the washing screen. Here, the finest products are sent to the stock area with a screw washer, and the other products are sent to the cone crusher. The products coming out of the cone crusher are directed to the other screen and the vertical shaft impact crusher, allowing the desired products to be obtained from the final screen at high quality. TBX-30 Vibrating Feeding Bunker CLK-110 Jaw Crusher Iaslhcjwakx Rsdwver TE-2060x3 2000x6000 3-Deck Vibrating Washing Screen HY-800 8000x8000 Screw Washer 20m3 Cone Crusher Feeding Bunker CC-300 Cone Crusher 20m3 Vertical Shaft Impact Crusher Feeding Bunker VSI-900 Vertical Shaft Impact Crusher TE-2060x4 2000x6000 4-Deck Vibrating Screen TE-2060x3 2000x6000 3-Deck Vibrating Screen Conveyor Belts, Control Cabin, Electrical Panel, and Automation System

Condition: new, Year of construction: 2022, 5.75 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 5.75 running meters Shelf offer consisting of: - 04 x frame approx. 200 x 80 cm, disassembled. - 18 x crossbar approx. 185 cm. - 09 x support shelf approx. 184.5 x 79.5 cm. - 18 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Iolowakqgohcdwvsar -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 607,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, table width: 2,700 mm, table length: 760 mm, overall weight: 27,000 kg, pressing force: 200 t, table height above floor: 390 mm, punching force: 200 t, Equipment: safety light barrier, Manufacturer: AIDA Ijlhou Dk Skecdwvear Type: NC2-200 Pressure: 200t Year of manufacture: approx. 1991 Stroke length: 150mm Distance above table: (adjustable) 280-390mm Table size: 2700x760mm Bear size: 2100x700mm Electric power: 3x200V(!!), 22kW - Japanese standard Net weight: 27000kg Size: 2475x2570x3625mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: new, Year of construction: 2025, For Sale: Mobile Vertical Shaft Impact Crusher - Contact Us 24/7 The CONSTMACH V-80 Mobile Vertical Shaft Impact Crusher is an ideal solution for stone crushing and fine material production. This mobile crusher is preferred in many projects due to its high performance and portable structure. Engineered with advanced technology and high-quality components, the V-80 is built to last and offers a durable structure. The V-80 is perfect for producing special fine aggregates with a fraction size of 0 to 5 mm. It allows for both sand making and the production of materials in different sizes simultaneously. With the ability to process natural stones up to 40 mm, it easily crushes various hardness materials and produces products in desired sizes. Noteworthy for its efficiency, the V-80 can process between 150 and 200 tons of material per hour. This mobile crusher effectively crushes various stone types such as granite, basalt, dolomite, gabbro, and limestone. The superior performance of the V-80 yields effective results in both primary and secondary crushing operations. The V-80 is also ideal for mobile limestone crushing operations, and its portable design allows it to be used across different sites. The combination of a vibrating screen and VSI crusher ensures high efficiency. With compact dimensions of 14 meters in length, 3 meters in width, and 4.2 meters in height, the V-80 offers high performance without occupying much space on the site. Cslemijbws The CONSTMACH V-80 will be your greatest ally in your projects, offering high efficiency and durability in the field of mobile crushers. Save time and money on your projects with this mobile crusher and complete your tasks quickly. V-80 Mobile Vertical Shaft Impact Crusher Technical Specifications Production Capacity: 150-200 tph Maximum Feed Size: 40 mm Feeding Height: 4 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 385 kW Electric Generator Requirement: 600 kVA Plant Weight: 30 tons Plant Dimensions: 14(L) x 3(W) x 4.2(H) meters Chassis Type: Single chassis on wheels equipped with hydraulic legs Iolhcdeufp Udewvsar

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. Iajlhcdjwakqaswvor - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2025, For Sale: Mobile Limestone Crushing Plant - Contact Us 24/7 The CONSTMACH PI-1 Mobile Crushing Plant is an excellent solution for efficiently crushing materials with low hardness and abrasiveness. The PI-1 stands out for its durability and performance, engineered with advanced technology and superior quality components. This mobile limestone crushing plant, with a production capacity of 150-200 tph, allows for the easy processing of large pieces due to its wide feed size and height. The PI-1 mobile crusher handles even the most challenging crushing tasks with ease, with a maximum feed size of 850 x 850 mm. The 4.2-meter feeding height facilitates the feeding and processing of materials, while the primary impact crusher and 3-deck screen ensure high efficiency. The plant operates with a total motor power of 320 kW and requires an 850 kVA electric generator, taking energy efficiency into account. Dppoyl This mobile crusher provides ease of transport and installation with its weight of 49 tons and compact dimensions. The plant, measuring 15 meters in length, 3.2 meters in width, and 4.2 meters in height, is built on a single chassis mounted on wheels equipped with hydraulic opening legs. These features make the CONSTMACH PI-1 flexible and highly performant on-site. Manufactured with the quality of CONSTMACH, this mobile crusher optimizes your material processing processes and offers excellent value for your investment with its durability and reliability. Make a difference in your projects with the PI-1, the ideal solution for your mobile limestone crushing needs. PI-1 Mobile Limestone Crusher Technical Specifications Iaslhcdjufd Ryewvsr Production Capacity: 150-200 tph Maximum Feed Size: 850 x 850 mm Feeding Height: 4.2 meters Main Configuration: Primary Impact Crusher + 3-Deck Screen Total Motor Power: 320 kW Electric Generator Requirement: 850 kVA Plant Weight: 49 Tons Plant Dimensions: 15(L) x 3.2(W) x 4.2(H) meters Chassis Type: Single chassis on wheels equipped with hydraulic opening legs.

Condition: new, Year of construction: 2022, 7.65 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 7.65 running meters Shelf offer consisting of: - 05 x frame approx. 200 x 80 cm, disassembled. - 32 x traverse approx. 185 cm. - 16 x support shelf approx. 184.5 x 79.5 cm. - 32 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1001,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Ijlhjwakpvecdwvjar Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2025, You can call us 24/7 for Primary Impact Crusher for Sale Our CPI series primary impact crushers offer a unique experience to their users by offering the highest efficiency and performance in stone crushing operations. CPI-1412, CPI-1415 and CPI-1620 models are designed to perfectly suit different needs and projects. Each of them has superior features with maximum feed sizes, crusher weights, motor powers and rotor diameters. The CPI-1412 model has an impressive crushing power with a maximum feed size of 900 x 900 mm and a weight of 23,000 kg. With its 250 kW engine power and 1.400 x 1.250 mm rotor diameter, it offers a production capacity of 200 - 250 tonnes per hour. As a stone crushing machine, it processes large pieces quickly and efficiently. Our CPI-1415 model draws attention with its 1.000 x 1.000 mm feed size and 28.000 kg weight. The 315 kW motor power and 1,400 x 1,540 mm rotor diameter support a production capacity of 350 - 400 tonnes per hour. This model is ideal for high capacity projects. Our largest model, the CPI-1620, with a feed size of 1,300 x 1,300 mm, is the perfect choice for crushing huge pieces. With a weight of 52,000 kg, dual 250 kW motor power and a rotor diameter of 1,600 x 2,000 mm, it reaches a production capacity of 400 - 600 tonnes per hour. This stone crusher provides reliable performance even on the most demanding projects. Our CPI series primary impact crushers can be used safely in all kinds of projects with their robust structure and high performance. Choose these stone crushers to achieve the best results and increase productivity in your projects. These crushers, which will meet all your needs with their high production capacity and powerful engines, will take your business one step further. Experience power and durability with CPI series. Ioljufg Ubehcdwvjar CPI-1412 Model Primary Impact Crusher Technical Specifications Maximum Feeding Size: 900 x 900 mm Crusher Weight: 23.000 kg Engine Power 250 kW Rotor Diameter: 1.400 x 1.250 mm Production Capacity: 200 - 250 t/h CPI-1415 Model Primary Impact Crusher Technical Specifications Maximum Feed Size: 1,000 x 1,000 mm Crusher Weight: 28,000 kg Engine Power 315 kW Rotor Diameter: 1.400 x 1.540 mm Production Capacity: 350 - 400 t/h Csmxtml2Xy CPI-1620 Model Primary Impact Crusher Technical Specifications Maximum Feeding Size: 1,300 x 1,300 mm Crusher Weight: 52,000 kg Engine Power 2 x 250 kW Rotor Diameter: 1.600 x 2.000 mm Production Capacity: 400 - 600 t/h

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Islhcjwakpcodwvsar Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2025, Contact us 24/7 for 200-ton cement silos for sale. Designed to meet the needs of your business, our CS-200 model offers an impressive storage solution with its 200-ton capacity. With a height of 18,360 mm and a diameter of 4,100 mm, it provides a large storage area. This silo stands out for its durable construction, weighing 14,800 kg and featuring a body made of ST-37 steel, ensuring long-lasting security. The silo legs are made from 200 x 2 mm rectangular iron and 20 mm metal plates, supported by NPL 80 mm angle iron. The structural integrity is guaranteed by the use of 140 mm steel C-channel and ST-37 8 mm metal plates for the conical section support material. The product is equipped with a 4" steel charging pipe extending to the silo leg and a maintenance platform. Features such as internal hatches and external manholes provide ease of use. The silo roof offers a complete structure, including guards. The production process is conducted according to structural analysis and approved project specifications, reinforcing the quality and safety of the product. Our CS-200 model is coated with 1 layer of anti-corrosive paint and 2 layers of topcoat epoxy paint, with a total paint thickness of 140 microns, providing superior protection against external factors. This silo is ideal for optimizing your workflow while reducing costs in the long term. With high-quality materials and an engineering marvel design, the CS-200 will be a reliable part of your business. Technical Specifications of the CS-200 - 200 Ton Cement Silo Silo Capacity: 200 tons, 153 m³ (1.3 ton/m³ cement density) Iaelheufc Tmscdwvjr Silo Height: 18,360 mm Silo Diameter: Ø 4,100 mm Number of Silo Legs: 4 Silo Discharge Diameter: Ø 300 mm Number of Components: 150 Silo Weight: 14,800 kg Silo Leg Material: 200 x 2 mm rectangular iron Silo Leg Supports: NPL 80 mm angle iron Silo Leg Plates: 20 mm metal sheet Conical Section Support Material: 140 mm steel C-channel Conical Section Material: ST-37, 8 mm metal sheet Silo Body Material: ST-37, 5 and 6 mm metal sheets Silo Top Cover Material: ST-37, 4 mm metal sheet Charging Pipe: 4" steel pipe extending to the silo leg Internal Hatch: Present External Manhole: Present Silo Roof Guards: Included Maintenance Platform: Present Structural Analysis: Conducted for Silos, Production Based on Approved Project Specifications Painting: 1 layer of anti-corrosive paint, 2 layers of topcoat epoxy paint, total paint thickness 140 microns

Condition: new, Year of construction: 2022, 28.85 running meters. Wide span shelving 60 cm deep Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 28.85 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 60 cm, disassembled. - 90 x traverse approx. 185 cm. - 45 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Delivery on request by us at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2360,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Iaelhcdwjwakn Sjvor Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2025, For Sale: Mobile Vertical Shaft Impact Crusher - Contact Us 24/7 The CONSTMACH V-80 Mobile Vertical Shaft Impact Crusher is an ideal solution for stone crushing and fine material production. This mobile crusher is preferred in many projects due to its high performance and portable structure. Engineered with advanced technology and high-quality components, the V-80 is built to last and offers a durable structure. The V-80 is perfect for producing special fine aggregates with a fraction size of 0 to 5 mm. It allows for both sand making and the production of materials in different sizes simultaneously. With the ability to process natural stones up to 40 mm, it easily crushes various hardness materials and produces products in desired sizes. Noteworthy for its efficiency, the V-80 can process between 150 and 200 tons of material per hour. This mobile crusher effectively crushes various stone types such as granite, basalt, dolomite, gabbro, and limestone. The superior performance of the V-80 yields effective results in both primary and secondary crushing operations. Ielhcdwoud Sizevear The V-80 is also ideal for mobile limestone crushing operations, and its portable design allows it to be used across different sites. The combination of a vibrating screen and VSI crusher ensures high efficiency. With compact dimensions of 14 meters in length, 3 meters in width, and 4.2 meters in height, the V-80 offers high performance without occupying much space on the site. The CONSTMACH V-80 will be your greatest ally in your projects, offering high efficiency and durability in the field of mobile crushers. Save time and money on your projects with this mobile crusher and complete your tasks quickly. V-80 Mobile Vertical Shaft Impact Crusher Technical Specifications Production Capacity: 150-200 tph Maximum Feed Size: 40 mm Feeding Height: 4 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 385 kW Electric Generator Requirement: 600 kVA Plant Weight: 30 tons Plant Dimensions: 14(L) x 3(W) x 4.2(H) meters Chassis Type: Single chassis on wheels equipped with hydraulic legs

Condition: new, Year of construction: 2022, 13.36 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data: - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 13.36 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 60 cm, disassembled. - 42 x traverse approx. 185 cm. - 21 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Islhcdowakn Eewvsar -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1120,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - H : approx. 200 cm - D : approx. 80 cm - L : approx. 57 running meters Ielhcdswaknrswvjar Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 79.5 cm. - 240 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 7267,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.