HYDRAULIC HOT PRESS

Höfer Presstechnik Expert-H120S

Condition: new, Year of construction: 2025, - Saw unit 2.2 kW (3 HP) - Milling unit 1,1 kW - Sawing length 3700 mm - Double high-grade LM-linear guides - Mechanic axial saw blade adjustment 0 – 2 mm infinitely variable - Power supply in cable duct with plastic link track - Cutting height 45 mm - Safety equipment Gielhj Azdiecdwwjt

Condition: new, Year of construction: 2025, Sample - production on customerdemand: Press area: 3000 x 1350 mm No. of cylilnders: 6 pcs. Diameter of cylinders 85 mm Specific pressure: 3,7 kg/cm² (with 350 bar), based on 80 % of the press area Press force: 12 - 120 TO Max. operating temperatur: 120°C Heating power: 230/400 V, 10,9 kW / heating plate, separately adjustable Stroke / opening: 400 mm Closing / opening speed: approx. 20 mm/sec Golhcsdq E A Eedwwoit Working height: ~900 mm Belt speed: max. 15 m/min

Condition: used, Year of construction: 1972, Functionality: fully functional, Brand: Höfer Type: H-65 Year of manufacture: 1972 Machine No.: 1191/72 Total pressing force: 65 tons Cylinders: 4 Safety ripcord: yes Heating platen format: 2,250 x 1,250 Heating plates: Electric, aluminum Operating manual + wiring diagram included All information is provided without guarantee, sold as is Gijlhov Uafqocdwwet

Condition: new, Year of construction: 2020, The machine that makes veneer pliable and supple for a variety of applications. Golhcdobnu Ucswwoit Before the veneer is put through the flexer, it must be pre-treated. In both the temperature and pressure preliminary treatment, the backer is applied to the veneer. The properties of the veneer are changed without influencing the appearance of the veneer. Due to the change in structure, post-forming quality can be achieved. This veneer can be wrapped around tight bends without splitting or cracking. A multi-head flexer, which increases the yield, has been designed especially for serial production. Electromotoric roller-height-adjustment and digital position display.

Condition: as good as new (ex-display), Year of construction: 2025, - working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - pressure force: 650 to 3500 dN [kg] / pressure wall - intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker Gislhcdwsf Eyc Sswst - Pressure adjustment infinitely variable

Condition: new, Year of construction: 2025, - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable - Max. pressure 3500 dN [kg] / pressure wall Gislhcdedikl Aewwet - Safety line

Condition: new, Year of construction: 2025, - Fast traverse speed - 200 mm/sec. - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 8 BALL ROTATING SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker Gijlhj Azcmocdwwjt - Automatic opening after expired timer - Pressure adjustment infinitely variable - Max. pressure 3500 dN [kg] / pressure wall - Safety line - Air jets in machine base - Layout-table - Combined set-up station/discharge roller way -

Condition: new, Year of construction: 2025, Economic and flexible – a self-adjusting case clamp that can cope with the constricted requirements of continuous line production. The feed-through case clamp KOPMATIK will help you reduce the cost and time spent on set-up and adjustments. The workpiece is scanned visually and the machine will adjust itself automatically. Only pressing time and pressure have to be determined by the operator. The base frame is made of solid rolling-profiles Pressing force from 200 kg bis zu 3500 kg Adjustment speed max. 200 mm/sec Golhebzw Naocdwwoit The horizontal pressure element is a sturdy table construction The frame of the vertical pressure beam is made of thick steel tubes Central pressure element for vertical pressure beam (additional accessory) The control unit is a PLC Siemens, series S7-300

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 3394, - 3700 mm cutting length Gelhs Ic Rdecdwwoit - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam - fence - pneumatically adjustable (autom. activated) - Touch panel - Front support table, pneum. adjustable - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: new, Year of construction: 2025, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be lifted and lowered pneumatically Golhobnu T Ajcdwweit + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment

Condition: new, Year of construction: 2025, The increased income significantly shortened the planned amortisation time. According to our satisfied customer, this investment – a large one by its standards – was one of its very best decisions. 3-fold capacity increase as compared to conventional production methods with veneer presses Adaptation of the plant to the customer specifications Best ergonomic design Golheduit Socdwwsit Pilot laser systems ease placing the boards Fully-automatic measuring of the components and cylinder shutoff

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN Gielhjimvzwocdwwjt - Stroke/opening: 400 mm - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz - 34 A, 18 kW - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN - Stroke/opening: 400 mm Gslhcdsimv Riswweit - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz - 34 A, 18 kW - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN - Stroke/opening: 400 mm - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm Gielhoimv I Docdwwjt - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz - 34 A, 18 kW - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Condition: like new (used), Year of construction: 2022, The hydraulic press was built in 2022 and is in excellent condition. Not only does it offer the reliable performance and precision you expect from a high-quality press, but also the flexibility to mount various tools and plates (heating plates, wear plates, etc.) as needed. The robust base frame made of heavy steel plates ensures stability and longevity, while the hydraulic unit with servo-hydraulics and frequency converter ensures optimal performance and energy efficiency. Ideal for various applications in wood, composite or plastic processing. • Pressing pressure: 8 - 80 to ≙ 80 - 800 kN • Press stroke: 550 mm • Opening: 800mm • Base plate size (press plates): 900 x 700 mm • Tool clamping surface, tool base plate: approx. 800 x 400 mm • Working height of the press: 775 mm • Machine structure: top pressure press • Version: Column press 4x Ø100 mm • Passage width (clear width between the columns): approx. 1,050 x 650 mm • Weight of the press: approx. 4,000 kg • Space requirement for the system (press, hydraulics, control cabinet): approx. 3,000 x 2,000 x 3,000 mm • Hydraulic cylinders: 2 pieces Ø140/80 mm; Made by Höfer • Closing speed: 13 – 70 mm/s • Pressing speed: 0.5 – 3 mm/s • Opening speed: max. 100 mm/s • Hydraulic power: 7.5 kW • Hydraulic components: Hawe, Dorninger, Parker, Sun, … • Length measuring rod on the press bear for position measurement • Pressure sensor for measuring hydraulic pressure • Electrical temperature and level monitoring in the hydraulic tank • Electrical components mainly Siemens (contactors, circuit breakers, ...) • Operating voltage 3x400 VAC, ~3, PEN • Control and valve voltage: 24 VDC • PLC make Siemens series S7 – 1500; fail-safe CPU • I/O system, Siemens ET200SP • Profinet bus system; Clamps made by Weidmüller • Siemens input device 9“ touch panel, TP900 for entering the production parameters • Manual / automatic operation • Recipes can be created and saved: Gslotrf Enjhcdwwsit o Press parameters (press pressure, position, speeds and time). o Enter the switching points for the different closing speeds, input in % o 5 parameter sets can be entered • Clear programming of the user interface • Emergency stop button on the control point • Maintenance bolt for securing the press bear in the top dead center (maintenance tool change position) • Light protection grille at the front, 3 additional sides grilled

Condition: used, overall weight: 44,800 kg, maximum load weight: 35,900 kg, first registration: 03/2023, Year of construction: 2023, Equipment: ABS, Internal vehicle number: G200194 German vehicle At our yard in Kaufungen - Kassel, available immediately More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) GOLDHOFER TU4 EXPERT 4870 Hydraulic ramps Hydraulic jacks BPW axles Odometer Financing example: * Internal number: G200194 * Purchase price: ¤64,900.00 * Down payment: 10% * Term: 60 days * Monthly installment: ¤1,016.49 Residual value: ¤12,980.00 ¤ If you like the offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. Errors excepted. We are happy to accept your used vehicle as part payment. Financing is available directly from us. Gijlhcdjvpbcaowwet GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ---

Condition: new, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 3, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Gislhcjwgc I Redwwet Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Fully functional veneer press from Höfer Panels: 250x125cm Heating plates: 2x 7.5kW Gisljwimd Ishcdwwet Excellent condition

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Gielhcjf Nlrqodwwet +++++

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Gsljv D I Uxshcdwwoit Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Functionality: fully functional, power: 4 kW (5.44 HP), Machine nr:854343 4-Kw motor belt length 6800X150mm Gijlhcdstmrltjwwet

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm Gjlhcjq Rb Irsdwwjit with rear fence

Condition: new, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Gijlheif Ek Recdwwet Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Gijlhofhgvwocdwwst Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, Year of construction: 2024, operating hours: 35 h, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Gjlhcdwjfnlkweweit Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.