Crosscut and miter saw GRAULE ZS 200 N

Graule ZS 200 N 5 kW (neigbar)

new

€10,336

Crosscut & miter saw ZS 200 N

Call

400 Volt Drehstrom-Bremsmotor 5,0 kW Sägeblattdurchmesser 520 mm, Sägeblattaufnahme 50 mm, Schnitthöhe 200 mm Sägeblatt auf 45° geneigt: Schnitthöhe 140 mm, Cbslv37akh Schnittlänge 420 mm, mit Maschinenständer und Handkurbel hinten zur Neigungseinstellung

Listing

Hohenstein

7990 km

Mitre circular saw

GRAULE ZS 200 N 5 kW

2022

new

€10,990

EXW ONO plus VAT

Call

Listing

7694 km

Graule ZS 200 N

2022

new

Call

New machine Year of manufacture 2022 Motor 400 V / 5.0 kW Crw8nehe0e speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the ...

Listing

Bitburg

7719 km

Crosscut and miter saw 6+4 m roller conveyor

Graule ZS 200 N mit RLH und RO

2023

new

€16,500

Call

Crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angl...

Listing

Neukirch/Lausitz

8090 km

Graule ZS 200 N-F

2023

new

Call

Machine inclinable by handwheel and worm gear, for saw blade D=520x50 mm, n=2800 rpm, motor 400 V/5 KW with mechan. brake and automatic SD-switch, cutting width at 90°: 430 mm, at 45° tilted 295 mm, cutting height at 90° 200 mm, at 45° tilted 140mm, saw can be tilted to one side up to approx. 25° to acute angles and to the left up to 30°flat. Cr9mi8ouxv (60°), with mobile base on 4 swivel castors, 2 of them braked, one roller track with 1.5 m length per side, steel rollers D=40 mm, left side sca...

Listing

Seeshaupt

8140 km

Graule ZS 200 N

2023

new

€11,190

Call

Engine power 5 kW Cutting height 200mm Pivotable and inclinable Tiltable by hand crank Laser cutting line display Cldq30jiy2 Hydraulic feed brake HM saw blade, Z60 - ORIGINAL Graule

Listing

Zambrów

8364 km

RADIAL ARM SAW

Graule ZS 200 N

excellent (used)

€6,900

Chop saw Miter saw Schiftersäge

Call

Listing

Bielefeld

7701 km

Graule ZS 200 N

2023

new

€10,355

EXW Fixed price plus VAT

Call

The professional for cut-to-length, miter and compound cuts The ZS 200 N is ideally suited for cross-cutting, miter and compound cuts. Materials such as wood, PVC and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally to miter on both sides. The N stands for tilt and means that the saw unit can also be tilted vertically to the side - this also makes it easy to perform compound cuts. Fact check ZS 200 N Crosscut...

Listing

7829 km

Graule ZS 200 N

2022

new

€10,998

Call

New machine Year of manufacture 2022 Crw7mbuukv Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the ...

Listing

Bitburg

7719 km

Graule ZS 200 N - 5 KW Motor

2022

new

€9,500

Call

crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Cju0v9cbdd Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to...

Listing

Ostrożne

8364 km

RADIAL ARM SAW

Graule ZS 200 N

1994

excellent (used)

€6,900

Call

Model ZS 200N motor 400 V / 5.0 kW speed 2800 U/min Cbyemte3ka length of cut 420 mm (bei 90°) depth of cut 200 mm miter range horizontally 45°-90°-20° miter range vertically 60°-90°-30° sawblade-Ø 520 mm suction plant 100 mm weight 310kg

Listing

Ahaus

7617 km

Aluminium Circular Saw

GRAULE ZS 170 N

new

Call

saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear b...

Listing

Gütersloh

7706 km

crosscut saw

Graule ZS 170 N

used

€3,200

Cross-cut- and mitre circular saw

Call

Max. saw blade diameter: 420 mm Cutting height: 170 mm Swivel miter range: 45°-90°-25° Tilt miter range: 90°-45° oil brake Material tensioner spray device Ffdkmsb

Listing

Gerolzhofen

7947 km

Graule ZS 135 N

1990

used

€3,600

Call

with roller table right and feed brake used, good condition make Graule type ZS 135 N year 1990 motor 380 V 2 kW cutting height approx. 135 mm cutting length approx. 430 mm blade diameter approx. 350 mm saw blade bore approx. 40 mm swivels right up to 45° swivels left up to 45° tilts up to 45° machine base roller table right 3000 mm with stop and scale feed brake hydraulic material plant made of aluminium new price approx. 6.500,00 € suction connection D 100 mm Czwrybx0xo space requirement appro...

Listing

7829 km

Graule ZS 170 N

2022

new

€6,725

Call

New machine Year of manufacture 2022 Circular crosscut and miter saw Machine for cutting to length as well as for horizontal and vertical miter cuts double miters are possible the drive with saw blade runs in a guide arm with 4 ball bushes which can be swiveled up to 45° on both sides for miter cuts. swivelling for sharp miters the saw blade can be swivelled to the right under 45° up to approx. 25° to the right in addition, the saw head can be tilted to the left on one side from 90° to 45...

Listing

Ostrożne

8364 km

Radial arm saw

Graule ZS 200

excellent (used)

€4,500

Call

Model ZS 200 motor 400 V / 5.0 kW speed 2800 U/min length of cut 420 mm (bei 90°) C0maka9qdf depth of cut 200 mm miter range horizontally 45°-90°-20° miter range vertically - sawblade-Ø 520 mm suction plant 100 mm weight 280kg

Listing

Aalen

8001 km

Graule ZS 200

used

Call

No. 04355 Crosscut and miter saw GRAULE ZS 200 used, working For processing aluminium, plastic and wood The ZS 200 is a compact and clear saw for processing large-format cross-sections. This machine is characterized by the following properties: Croffcfy - Clarity during the cutting process thanks to the saw blade arranged at the top. - Extremely large cutting range with a compact and stable design. - Powerful 3 kW three-phase motor with automatic star-delta starting circuit - Horizontal mit...

Listing

Ahaus

7617 km

Aluminium Circular Saw

GRAULE ZS 135 N

new

Call

saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bear...

Listing

Zambrów

8364 km

RADIAL ARM SAW

Graule ZS 170 N

1999

excellent (used)

€4,000

Cross-cut and miter saw with machine stand

Call

Listing

Gerolzhofen

7947 km

Graule Typ ZS 170 N (neigbar)

new

€6,166

Crosscut & miter saw ZS 135 N

Call

Description: - Crosscut and miter circular saw with a maximum cutting height of 170 mm - Miter-adjustable machines in 2 levels - Stable gray cast iron construction - Precise ball bushing of the tool slide on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically - Readjustable fixed stops at 90 ° and 45 ° - Lower saw blade protection can be connected to the suction system Scope of delivery: 1 x Graule crosscut and miter cir...

Listing

7694 km

Graule ZS 135 N

2022

new

Call

New machine Year of manufacture 2022 Suspension and miter saw motor: 400 V / 2,2 kW speed: 3800 rpm cutting length: 440 mm (at 90°) Cutting height: 135 mm (at 90°) saw blade Ø: 350 mm saw blade holder: 30/40 mm suction socket: Ø 90 mm Weight without stand: approx. 105 kg Tilting up to 45° on one side Equipment: - with maximum cutting height of 135 mm - sturdy cast iron construction - precise ball bushing guide of the tool slide on hardened and - and ground steel shafts - manual saw feed Bnszm...

Listing

Bielefeld

7701 km

Graule ZS 200 NF

2022

new

€13,895

Crosscut Gehrung- and SchiftersÃ¤ge

Call

Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for preci...

Listing

Aalen

8001 km

Crosscut saw / pull saw

Graule ZS 85 N

used

Call

No. 04353 Crosscut saw / pull saw GRAULE ZS 85 N used, good condition ready to plug in, ready to use no type plate available, therefore techn. Data without guarantee! tiltable / pivotable AC brake motor 230 volts / 1.03 kW / 2800 rpm Saw blade diameter 300 mm Saw blade bore 30 mm Bpcopsn8 Suction nozzle diameter 75 mm Workspace Cross cuts 380 x 85 mm Miter cuts, saw blade positioned vertically, swiveled 45° to the left or right 265 x 85 mm Vertical miter cuts, saw blade inclined 45° to the le...

Listing

Bitburg

7718 km

Graule ZS 200 NF - sofort verfügbar -

2023

new

€13,590

Cutting to length and mitre circular sawing machine

Call

Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left ...

Listing

Rödermark

7854 km

GRAULE ZS 85 N

1985

good (used)

Call

Cutting to length - and mitre - rafter cut - circular sawing machine Technical data: - Saw blade dimensions 300 x 3.5 x 40 mm - Horizontal mitre adjustment 45° - 90° - 20 - Vertical mitre adjustment 60° 90° - 45 - Cutting range - at 90° W 380 x H 85 mm - at 45° W 265 x H 85 mm - at 45° inclined H 65 mm - Saw blade speed 2750 rpm Etcnlsn - Drive 220 V - Space requirement approx. W 700 x H 1400 x D 1400 mm - Weight approx. 180 kg - with: - hydr. feed brake - Saw blade

Listing

Gerolzhofen

7947 km

Cross-cut and miter saw

Graule Typ ZS 170 N (neigbar)

new

€5,520

Call

Listing

Aalen

8001 km

Graule ZS 170 N

2009

used

Call

No. 04344 Crosscut and miter circular saw GRAULE ZS 170 N Cvfc9ensyt For wood, aluminum and plastics used, year of construction 2009 incl. roller conveyor This machine is used for cutting to length, as well as for horizontal and vertical miter cuts. Double mitres are also possible. The saw blade drive runs in a guide arm mounted with 4 ball bearings, which can be swiveled up to 45° on both sides for miter cuts. For pointed miters, the saw blade can be swiveled to the right by between 45° an...

Listing

Aalen

8001 km

Graule ZS 170 N

2009

used

Call

No. 04344 Crosscut and miter circular saw GRAULE ZS 170 N For wood, aluminum and plastics used, year of construction 2009 incl. roller conveyor This machine is used for cutting to length, as well as for horizontal and vertical miter cuts. Double mitres are also possible. The saw blade drive runs in a guide arm mounted with 4 ball bearings, which can be swiveled up to 45° on both sides for miter cuts. For pointed miters, the saw blade can be swiveled to the right by between 45° and approx. 2...

Listing

Aalen

8001 km

Graule ZS 170 N

2009

used

Call

Listing

Aalen

8001 km

Graule ZS 170 N

used

Call

No. 04352 Crosscut and miter circular saw GRAULE ZS 170 N For wood, aluminum and plastics used This machine is used for cutting to length, as well as for horizontal and vertical miter cuts. Double mitres are also possible. The saw blade drive runs in a guide arm mounted with 4 ball bearings, which can be swiveled up to 45° on both sides for miter cuts. For pointed miters, the saw blade can be swiveled to the right by between 45° and approx. 25°. In addition, the saw head can be tilted on one...

Listing

Aalen

8001 km

Graule ZS 170 N

used

Call

No. 04352 Crosscut and miter circular saw GRAULE ZS 170 N For wood, aluminum and plastics Cyqv2dfq used This machine is used for cutting to length, as well as for horizontal and vertical miter cuts. Double mitres are also possible. The saw blade drive runs in a guide arm mounted with 4 ball bearings, which can be swiveled up to 45° on both sides for miter cuts. For pointed miters, the saw blade can be swiveled to the right by between 45° and approx. 25°. In addition, the saw head can be tilt...

Listing

Aalen

8001 km

Graule ZS 170 N

used

Call

Listing

Aalen

8001 km

Graule ZS 265 N-K

2015

used

Call

No. 04354 Crosscut and miter saw GRAULE ZS 265 N-K used, year of construction 2015 few operating hours The saw is suitable for cutting wood, wooden materials, plastic and aluminum profiles. with pneumatic saw feed The saw blade is swiveled and tilted by an electric motor The cabin is opened and closed pneumatically with a foot pedal Technical data: Saw blade diameter 650 mm, bore 50 mm cutting area: Cross section 90°: 50 mm Miter cut 45°: 350 mm Height of cut at 90°: 265 mm Miter range ho...

Listing

Aalen

8001 km

Graule ZS 265 N-K

2015

used

Call

No. 04354 Crosscut and miter saw GRAULE ZS 265 N-K used, year of construction 2015 few operating hours The saw is suitable for cutting wood, wooden materials, plastic and aluminum profiles. with pneumatic saw feed Cr8za8ah2c The saw blade is swiveled and tilted by an electric motor The cabin is opened and closed pneumatically with a foot pedal Technical data: Saw blade diameter 650 mm, bore 50 mm cutting area: Cross section 90°: 50 mm Miter cut 45°: 350 mm Height of cut at 90°: 265 mm Mit...

Listing

Aalen

8001 km

Graule ZS 265 N-K

2015

used

Call

Listing

Aalen

8001 km

Crosscut saw / pull saw

Graule ZS 85 N

used

Call

No. 04353 Crosscut saw / pull saw GRAULE ZS 85 N used, good condition Cq087jvkjl ready to plug in, ready to use no type plate available, therefore techn. Data without guarantee! tiltable / pivotable AC brake motor 230 volts / 1.03 kW / 2800 rpm Saw blade diameter 300 mm Saw blade bore 30 mm Suction nozzle diameter 75 mm Workspace Cross cuts 380 x 85 mm Miter cuts, saw blade positioned vertically, swiveled 45° to the left or right 265 x 85 mm Vertical miter cuts, saw blade inclined 45° to the ...

Listing

Aalen

8001 km

Crosscut saw / pull saw

Graule ZS 85 N

used

Call

No. 04353 Crosscut saw / pull saw GRAULE ZS 85 N used, good condition ready to plug in, ready to use no type plate available, therefore techn. Data without guarantee! tiltable / pivotable AC brake motor 230 volts / 1.03 kW / 2800 rpm Saw blade diameter 300 mm Saw blade bore 30 mm Suction nozzle diameter 75 mm Workspace Cross cuts 380 x 85 mm Miter cuts, saw blade positioned vertically, swiveled 45° to the left or right 265 x 85 mm Vertical miter cuts, saw blade inclined 45° to the left 380 x ...

Listing

Aalen

8001 km

Cross-cut, cross-cut and mitre circular saw

Graule ZS 200

used

Call

No. 04355 Crosscut and miter saw GRAULE ZS 200 used, working For processing aluminium, plastic and wood The ZS 200 is a compact and clear saw for processing large-format cross-sections. This machine is characterized by the following properties: Cq08x8afaz - Clarity during the cutting process thanks to the saw blade arranged at the top. - Extremely large cutting range with a compact and stable design. - Powerful 3 kW three-phase motor with automatic star-delta starting circuit - Horizontal m...

Listing

Gerolzhofen

7947 km

Graule ZS 85

used

€1,300

Call

used, good condition make Graule type ZS 85 motor 380 V cutting height approx. 85 mm blade diameter approx. 300 mm pivoting right Bn3q3tr storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

Listing

Tauberbischofsheim

7924 km

crosscut saws

Graule ZS 85

used

€1,900

Call

cutting height: 85 mm cutting length: 380 mm engine: 2,6 kW connection: 220V The used chop saw Graule ZS85 is for cutting to length and for cutting mitres: swiveling and tilting. she is equipped with a carbide (HM) circular saw blade and in very good original condition. 3xqhnphlmj

Listing

Mönchengladbach

7637 km

Pull saw

Graule ZS 85 NS

1998

good (used)

€1,900

Call

Graule ZS 85 NS E2ixeni Crosscut and miter circular saw inclinable year of manufacture 1998 / 3-29 400 Volt three-phase brake motor 2 kW saw blade diameter 300 mm, bore 30 mm cutting height 85 mm, cutting length 380 mm at 90° cutting length 270 mm at 45 suction nozzle D = 75 mm

Listing

Wilhermsdorf

7996 km

Graule ZS 135

1986

good (used)

€1,250

Call

Crosscut and miter saw Ebwitjwf horizontal and vertical inclination adjustable steel-UK-mobile included in the price

Listing

Nattheim

(dealership location)

8019 km

Kappsäge

Graule ZS 135

1992

used

Call

max. Schnitthöhe : 135 mm max. Schnittlänge : 430 mm Schwenkbar : zweiseitig Sägblattdurchmesser : 350 mm Sägeblattbohrung : 30 mm Maschinenständer : Ja mit Rollbahnen links und rechts je 3000 mm lang, 300 mm breit Gewicht ca. : 120 kg Abmessung : 850 x 850 x 1300 mm Motorleistung : 3,0 kW Absaugdurchmesser : 95 mm Mzh33o Lagerort: Nattheim

Listing

Jettenbach

7806 km

Miter, chop & sash saw

Graule ZS200 N

2023

new

Call

5 KW 7,5 HP cutting height 200 mm inclinable up to 60 ° to the left, up to 30 degrees to the right by means of a hand crank from the front Cutting height at 45 ° tilted 140 mm Cutting width 430 mm Cutting width at 45 ° tilted 290 mm Various options on request swivels up to 60 degrees to the left, to the right up to 45 degrees incl. saw blade for wood 6.000 mm heavy duty unloading roller conveyor, mounting side left, stop slide can be adjusted from the machine with hand wheel, pneumatic locki...

Listing

Ostrożne

8364 km

Radial arm saw

Graule ZS 170

excellent (used)

€2,900