Workbench + Cabinet + Vise

Garant

Condition: good (used), Internal article no.: 24088 15pcs. Dqopil HSK-A63 Shrink fit holders Manufacturer: Garant / Kelch Diameter: 20 / 20 / 16 / 16 / 12 / 12 / 12 / 8 / 6 / 6 / 6 / 6 / 6 / 6 / 6mm The holders come from a bankruptcy and are in good, used condition. Equipped with tools!

Condition: good (used), Garant oil cabinet 145x72x75cm Design: Sturdy sheet steel construction with reinforced hinged doors, lockable by sliding handle with pin cylinder lock. The cabinet body is equipped with a single pull-out safety device. Due to the single pull-out safety device, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Drawer shelves and drawers can be accommodated in 25 mm increments. Oil cabinet, equipped with plastic oil cans Drawer/extension shelf load capacity: 200 kg Drawer extension (partial/full extension): 100 % Drawer extension: Pull-out stop Height adjustment in increments: 25 mm pin cylinder lock: modular plug-in insert HxWxD=145x72x75cm without key Item condition used UVP 3240,- € Fragofz Further switch cabinets - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), operating hours: 200 h, Functionality: fully functional, type of input current: AC, input voltage: 230 V, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total width: 900 mm, total length: 730 mm, total height: 950 mm, overall weight: 115 kg, workpiece weight (max.): 20 kg, feed length X-axis: 30 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, Equipment: type plate available, fully functioning from the measuring laboratory CNC-controlled video measuring microscope with fast image processing, high-resolution color camera and an easy-to-use, workshop-compatible multi-touch panel on a PC basis. Incident light: 56 white LEDs in 2 concentric rings. 1 ring and 4 segments can each be switched and dimmed individually. Bskmjdpby2W Transmitted light: Long-lasting LEDs, telecentric, switchable and dimmable. Solid granite base with surface-hardened cross table and high-precision guides. • Easy creation and use of measuring programs. • Practical automation of measuring processes, e.g. pallet measurements. • Modern, user-friendly and intuitive measuring software Includes PC, software, ready to measure Measuring range 300x200x200 Length measurement deviation EUXY, MPE according to DIN EN ISO 10360-7, measured with magnification factor = 0.5. Permissible ambient conditions: 20 °C ±1 K, temperature gradient Δth = 0.5 K/h, Δtd = 4.0 K/d, measured with a calibrated standard. New price from 53,000 euros The device can be inspected on site!

Condition: excellent (used), quality grade 1 Br2Rmw9Crau

Year of construction: 2009, Condition: used, weight 300 kg length 550 mm height 2000 mm Gkppncr8 width 1000 mm tool adaptor für SK 40/50

Condition: good (used), Sale, Dppvk9 Crimping machines, pliers, pliers. Klauke, Molex, Tyco, Garant, TE, Wirefy, Weidmuller, Amp, YYT II, Harting, Hilpress, Stocko, Bessel, JST YRS, MT- 225D, Stahlwilie, Promat, Knipex

Condition: refurbished (used), End mill Make Garant type EQ 753200 Slot milling cutter Corner milling cutter shank diameter 20 mm cutting length 38 mm used Pxnliu freshly ground and coated material HSS Co 8

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request! Rfubobuh

Condition: new, 3-way connection with plug-in coupling and connection thread 1/2 " 3 pieces available Bwhcgbbbrr

Condition: used, range L-W-H 1000*500*2000 mm Ccaoylca0M

Condition: good (used), Year of construction: 2016, Functionality: fully functional, Bag widths :105-320mm Cut-off lengths : 240-650 mm Botom width: 55-180m Main machine incl. the following components: - Jumbo roll unwind, for a max. roll diameter of 1300 mm, including 1 (one) pneumatic winding shaft for inner core diameters of 76 mm, including roll lifting device and automatic web tension control - servomotor-driven brake for the paper unwind with suspended dancer roller - precise and continuous web tension control over the entire diameter of the paper roll - Possibility of remote diagnostics by modem integrated in the bag machine - nozzle seam pasting assembly - Slitting unit to obtain a larger bottom flap o Tube forming with servo-motorized adjustment/* positioning of the gusset forming disks - Pivoting and moveable 15" touch screen panel with graphic display of the control elements. The input of data is product related - 2 draw units with servo drive and pneumatic lift-off. Input of cut-off length in 1 mm increments. Web tension adjustment in 0.01 mm increments. - Serrated-cut assembly The servo drive ensures automatic adjustment of the cutting speed to the respective cut-off length. - Transport belt with servo drive after the cutting unit, to transfer the separated tubes to the precreasing station - Pre-creasing station infinitely adjustable by motors while machine is in operation. - Bottom opening station featuring axial adjustment during operation. When changing the gusset depths, no cams have to be exchanged. - Bottom forming cylinder with adjustable side grippers, adjustment is via electric motor. When changing the bag size, an exchange of the grippers is not required - Bottom pasting unit with automatic glue supply, continuous rotation and lift-off at machine stoppage. The glue application unit is designed for the use of low viscosity adhesives Dpowt2 - Bottom closing station with rotating sickles, the position of which is infinitely adjustable by an electric motor during operation of the machine - Deviating drum - Delivery cylinder with pneumatic counter. The bag marking the count projects upwards. The number of bags per packet can be adjusted in increments of one bag - Delivery table - Electronic print mark control for the processing of pre-printed rolls - Switch cabinet with SPS, type SIEMENTS S 7 i frequency converters, operating and control units incl. connecting cables as per standard installation drawing

Condition: used, Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Manufacturer: Garant, faceplate chuck size Ø 350 mm -Adapter: Short cone 6 -Bolt circle: Ø 133 mm / M12 -Through hole: Ø 80 mm -Groove width: 18 mm -Dimensions: Ø350 x 135 mm Br0Wrazyda -Weight: 42 kg

Condition: good (used), Functionality: fully functional, The following item is for sale: - Our offer number: 44/129 - Runout tester Runout tester with dial gauge - Manufacturer: Hoffmann Garant - Dimensions: WxHxD 350x270x110 mm - Weight: 10,65 kg - with Hoffmann dial gauge Shockproof 0,01 mm - optical condition according to photos - used - functional - Shipping Germany-wide 8,90€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. C90Bsj3 Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: ready for operation (used), Garant 44 5350 600 HC 1 Height measuring device Measuring device Technical data see picture no. 2. New price approx. 8000€ Garant granite top: Dimensions: 1200mm x 800mm x 160mm ( L x W x H ) Weight: approx. 460 kg Accuracy: Degree 0 Scyg2Mx8Hj DIN 876 New price: approx. 3200 € You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: like new (used), Year of construction: 2021, We are offering our 24 workstations from our tool logistics in Braunschweig-Wenden for sale. Year of construction: 2021 Make / Manufacturer: Garant Worktop: with V2A support Height adjustment: up to 150 mm Color: RAL7035 Other: 1 underbench drawer block per AP, Kanban storage top Dimensions: 2,000 mm x 700 mm (8 pieces with additional 1,000 mm connecting element) Sold without the IT equipment shown Location: 38110 Braunschweig, Hauptstr. 46d Bc97Y7P8Z The system is available for dismantling from 03.2025 (EXW / ex works). Dismantling cannot be offered on site.

Condition: good (used), Vice jaw width 125 mm Garant. Height adjustable. Rqctcqeown

Condition: used, Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm Do3Uqp -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Condition: used, mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm Bqg8Un8Itm -Depth: 800mm -Height: 840mm -Weight: 56 kg

Year of construction: 2017, Condition: used, Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine Bi7E8Feajm -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Condition: used, mobile workbench, folding workbench, work table, assembly bench -Width: 1000 mm -Depth: 700 mm -Height: 800 mm -Bank vise: 1 Bdcjdmozim -Pipe vice: 1 -Dimensions: 1000/700/H800 mm -Weight: 48 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Manufacturer: Werner-Garant, face plate type A 560 chuck size Ø 710 mm -Intake: short taper 8 B3Oui3Aljw -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 209 kg

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg Bafs2Np8

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters Cchygttftd -Manufacturer: Garant, shell end mill, shell end mill, 2 pieces -Type: H 75Ø x 35 x 27 mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Price: complete -Dimension: Ø 75 x 35 x 27 mm -Weight: 0.7 kg/pc.

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: guarantee, stable design -7 drawers. 610 x 600 mm, see photos for height -Lock: without key -Dimensions: WTH 1435/790/H1325 mm -Weight: 238 kg Mykwts

Condition: used, mobile workbench, folding workbench, work table, assembly bench Bdok2Qm7Gy -Width: 760 mm -Depth: 695 mm -Height: 840 mm -Number: 1x bench vice -Dimensions: 760/695/H840 mm -Weight: 49 kg