Sharpener

Frama ALV 610

Year of construction: 2002, Condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF Fbunb8Cl 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Year of construction: 2015, Condition: good (used), We offer here a used box shelf for sale. The shelf is ideal for lighter boxes, but also cardboard boxes can be easily accommodated. The crate rack can be individually adjusted to your own needs. Both the angle of inclination of the roller bars and the distance between levels can be adjusted quickly and easily with an Allen key. The levels are equipped with guide rails on both sides and a stop on one side, so that the crates/cardboard boxes are secured against falling down unintentionally. Technical data and further information: Manufacturer: Beewatec Description: Cardboardrack 1 lanes 19032-01 Year of manufacture: approx. 2015 Notes: The rack is shipped pre-assembled as shown in the pictures. Gybp8S Included in the scope of delivery are: 01x crate shelf, used total length: approx. 2.500 mm total depth: approx. 610 mm total height: approx. 1.915 mm interior depth: approx. 485 mm Dead weight: approx. 160 kg Load capacity per level: approx. 15 kg Load capacity of entire shelf: approx. 100 kg Number of levels: 04 pcs. Number of roller strips per level: 02 pcs. Diameter of tubes (frame): approx. 27 mm Length of roller strips: approx. 2,430 mm Profile dim. Roller strips: approx. 42 x 35 mm (WxH) roller width: approx. 25 mm roller pitch: approx. 35 mm Material colour frame: galvanized Material colour wheels: cream white Material colour of frame: galvanised incl. label holder incl. guide rails: approx. 2,450 mm incl. end flange

Condition: excellent (used), Year of construction: 2015, Combined heat and power plant with gas Year of construction: 2015 Model: ALV SSX50/104EG-5.7 Мы говорим по русски! Viewing only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Boh7Gkh90Wb Of course we also take care of all formalities Loading possible

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Polypal for shelf distance: approx. 545 mm total length: approx. 610 mm profile dim.: U 50 x 15 mm Cc7Hy9Ca Weight: approx. 0,650 kg | pcs. General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, VAT Vakuumventile AG Rectangular door/gate valve with magnetic field sensors and solenoid valve, 20521 354922761 0420, BMF 235K PS C 2A SA2 S49 01Model: 205213549227610000including 2 BALLUFF magnetic field sensors (BMF00F5 / BMF 235K-PS-C-2A-SA2-S49-01) Jwqq8Qkw

Condition: new, Year of construction: 2024, Construction As a standard, the exhaust filter frame is made Hs2Atgarg of steel - AISI 304 (it is possible to make a special version of steel, e.g. AISI 316) Principle of operation The scrubber is equipped with two filtration towers - a pre-treatment column and a proper treatment column. The first column has one filtration level, the second column additional four levels of exhaust gas filtration. Each filtration level is equipped with spray nozzles, allowing for self-cleaning of the filter cartridges. Oils and impurities condensed from the exhaust gases enter the water tank located at the bottom of the machine. Then, impurities are filtered out of the bath using a lamellar oil separator. Installation Purchaser should ensure access to the machine of media such as: cold/hot water, compressed air and ensure the possibility of replacing the water bath after the cleaning process. The columns are disassembled to facilitate transport and installation.

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm Br2Rbrk9S33 total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: new, Year of construction: 2023, Functionality: fully functional, cooling capacity: 478.56 kW (650.66 HP), type of input current: three-phase, overall weight: 4,750 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, frequency: 50 Hz, total width: 2,210 mm, total length: 7,200 mm, total height: 2,500 mm, noise level: 68 dB, HITEMA INTERNATIONAL SBS-R545B.610/F10 Type: scroll System: air cooled Shell and tube evaporator Number of compressor: 6 Lpc8Amd Number of circuit: 2

Condition: new, Fanuc Servo Amplifier A06B-6272-H045#H610 Brkm9Zzyfqg   Condition / Zustand DE: unused, in original packaging EN: unused, in original packaging

Condition: used, pressure 50 t throat 610 mm hole diameter in sheet thickness 30 / 15 mm connected load 5,5 kW stroke 60 mm 1510 x 660 mm weight of the machine ca. 1,9 t dimensions of the machine ca. 1,5 x 1,55 x 1,9 m Bmaa2Tokbsm ith a wide range of accessories See pictures

Condition: used, 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve valve -Manufacturer: Bosch, valve with solenoid -Type: 0 820 006 103 -Number: 1x valve available I9Fpasd -Price per piece -Dimension: 230/70 / H65 mm -Weight: 0.9 kg / pc.

Condition: ready for operation (used), Year of construction: 2010, load capacity: 1,000 kg, fuel type: electric, Equipment: front guard, lighting, trailer coupling, Electric transport tractor with trailer and charger, 6 kmh, load capacity 1000 kg, trailer load capacity 2000 kg, Istz8Xy

Year of construction: 1998, Condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm Bo2Ok0Rx - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: like new (used), The pewiFLEX™ (useful width 610mm) is used for: Tmtaddfl Box transport, where the boxes are larger than 130 mm; Ground floor loading and unloading of goods; Temporary transport from A to B; Ergonomically sound, because the height of the roller conveyor can be adjusted to the user; Small loading and unloading volumes on an annual basis. The pewiFLEX™ is a roller conveyor that can be pulled in and out just like a harmonica. Because the roller conveyor works like a harmonica, it is also possible to make a bend with the roller conveyor. The flexible roller conveyor is supported by several undercarriages fitted with wheels. The bases can be mutually adjusted in height so that the height of the pewiFLEX™ can be adjusted to the user. The wheels are equipped with brakes. In addition, there is a possibility to perform the pewiFLEX with the pewiIMPACT™. An impact section for the roller conveyor on which the goods can be placed. Roller conveyor, powered roller conveyor, roller conveyor with unrolling belt, telescopic conveyor, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor, roller conveyor: fully electrically movable telescope

Condition: used, Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 NBA MS -ID No.: 00061096 -Voltage: 18-33 V -Number: 191x valve available R0Shc3O7Kf -Price per piece -Dimensions: 68/32/H51 mm -Weight: 0.2 kg/piece

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design -7 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key -Quantity: 2x cabinet available -Price per piece U7Cnwpka -Dimensions: WTH 600/610/H950 mm -Weight: 104 kg/pc.

Condition: used, Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys Ge3Ulsds -Workshop trolley: Transport trolley made of aluminum, with drawer -Length: 1030mm -Width: 610mm -Height: 980mm -Swivel castors: 4 pieces, 2x with brakes -Weight: 24 kg

Condition: used, Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine -Width: 610 mm -Length: 2900 mm -Height: 55 mm -Working height: 185 mm Uulwjet0 -Plate: with supporting ribs -Groove width: 18 mm -Dimensions: 2900/610/H185 mm -Weight: 874 kg

Condition: used, Year of construction: 2012, grinding length 1025 mm grinding width 520 mm workpiece height - mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis + 110 / - 5 ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm Co33Rc3Pi0 spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared without coolant device - was connected to the central supply.

Condition: good (used), AP 175 DP 600 CON VISUALIZZATORE SUI DUE ASSI E MANDRINO PER INTERNI Xb9Zwkwe

Condition: good (used), Year of construction: 2012, Traverses XYZ: 610 x 305 x 460mm, Table size 700 x 380mm, BT40 spindle taper, spindle speed 8000 rpm, FANUC OiM Control, Iswdi0Y 16 station ATC, Coolant, Low Volt Light

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm Dqna7H z-travel 600 mm control iTNC530 table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m without vice

Condition: excellent (used), Year of construction: 2005, Traverses XYZ: 610 x 510 x 610mm, Table 900 x 500mm, 18.5kW spindle motor, Fanuc control, 12000 rpm Spindle, 24 station ATC, BT40 taper, swarf auger, Coolant, low volt light Ue2Tdnosbb

Condition: used, Year of construction: 2010, grinding length 1025 mm Co3Couajac grinding width 520 mm workpiece height - mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis + 110 / - 5 ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared without coolant device - was connected to the central supply.

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm workpiece height - mm Control SINUMERIK 840 D tool taper HSK-A 63 Dqnas7 A - axis + 110 / - 5 ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared without coolant device - was connected to the central supply.