Tractor

Fendt Farmer 311 LSA Turbomatik

Condition: used, Year of construction: 2022, operating hours: 4,300 h, maximum speed: 50 km/h, Equipment: all wheel drive, compressed air brake, Claas Axion 850 Cmatic CIS+ Year of manufacture: 2022 Currently 4,300 operating hours Equipment: 600/70 R30 Mitas SFT / fixed rim / wide track width 710/70 R42 Mitas SFT / fixed rim CLAAS front linkage 4.6 t External control for front linkage 3-point cast weight 900 kg CIS+ operating terminal, color display CMATIC incl. 2 engine speed memories (CIS+) Task Control Basic activation, on tractor side AUTO PILOT / GPS PILOT Ready TELEMATICS advanced license – 1 year CLAAS Remote Service incl. five-year license ELECTROPILOT with reverse function Steering interface prepared Steering interface activation Electronic hitch control, standard EHC Rear hitch lower links, catch hooks Cat. 3 Lower link stabilizers, automatic Long hydraulic top link, catch hooks Cat. 3 Drawbar support with insert for swinging drawbar Swinging drawbar with ball coupling Automatic trailer hitch Compressed air brake system (dual and single-circuit prep.), incl. air dryer Hydraulic system load-sensing, variable pump 150 l/min, 200 bar 4 spool valves, electrohydraulic proportional Power Beyond, load-sensing couplings with flat-face connectors CMATIC - stepless transmission 50 km/h transmission ratio PROACTIV front axle with brakes PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6-spline and 1 3/4" 6-spline Parking brake on REVERSHIFT lever CMATIC 2.0 - cruise control deactivation via drive pedal (CIS+) 264 hp max. output, 261 hp homologated nominal output, ECE R 120 Main battery switch, electronic Air compressor Engine brake Cab with 4-point suspension Roof with sunroof, rear-opening Rear window for 4-post cab, tinted Rear window wiper, incl. right side wiper Electric mirror, incl. wide-angle mirror Rear fender extensions, rear fender outer width 2.75 m Removable toolbox, left Additional interface sockets 2 auxiliary driving headlights, A-pillar Dodpfx Adowblkkjuola Oversize tail lights, halogen with warning boards 4x halogen driving lights, 2x halogen work lights bonnet Work lights halogen: 4x front roof, 4x rear roof Working lights LED – premium Comfort seat, fabric, semi-active lateral suspension Passenger seat with safety belt Automatic climate control, incl. preparation Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Internal No.: 11060349

Condition: used, Year of construction: 2025, working width: 9,100 mm, Mower Bar: Disc | Claas Disco 9300 Direct Swather Demo unit in use Year of manufacture: 2025 Large-area mower for rear tractor mounting, Cat. III - Working width: 9.10 m (8.90 m) - Main frame with optimized center of gravity due to rearward-angled outriggers - Low-speed concept with reduced speed to 850 rpm DIRECT SWATHER: - Central or unilateral swath merging via augers - Conical auger design for consistent crop flow - Swiveling augers for wide crop distribution - Auger discharge chute equipped with knife and counterknife Dledpfx Adswu Irkjuea Features: Wear skids Three-point hitch Drive shaft 1 3/8", 6-spline ISOBUS cable Outer protective curtains, hydraulically foldable Individual section lift (2-hose) Optionally available (not included in price): CLAAS Disco 3200 F Profil Front-mounted disc mower without conditioner 3.00 m working width with wear skids incl. ACTIVE FLOAT hydro-pneumatic suspension incl. drive shaft | Internal no.: 11264119

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at Dljdpfxjxl Snue Adusa We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each Dlodpfoxf U N Uox Aduja incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146