Micrometer

Feinmesszeugfabrik Suhl TGL 15046 I

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa Bkgoedbn pressure ratio: 30:1

Condition: new, Year of construction: 2025, Powder coating booths, sizes defined by customer, D0Dwju Additional equippment possible.

Condition: good (used), Polar Mohr PW-1 pile turner The device is like new, fully functional, ready to work. Technical data: Format 660x800mm Stack height 1250mm Load capacity 500kg B0O8Uvqgzi The weight of the device is 700 kg Power supply 380V Control from the desktop, fast work, hydraulic drive. Noiseless operation. Compact design, takes up little space.

Condition: used, ABB robot IRB 6640 IRB 6640-235/2.55 Foundry Prime Robot Robot Industrial robot Dqrkhj

Condition: refurbished (used), Year of construction: 1991, 1 piece overhauled industrial helical bevel gearbox from Flender TGL 21814 with backstop Maximum torque: 28,000 Nm Gear ratio: i= 1:20 Max. power: 105 kW Oil filling: 135 kg Speed: n1= 710 Speed: n2= 35 Maximum speed to transmission power (only with oil cooler) 710 rpm to 112 kW 950 rpm to 149 kW 1400 rpm to 220 kW M0G2H3Ao Maximum speed to transmission power (without oil cooler) 710 rpm to 105 kW 950 rpm to 115 kW 1400 rpm to 130 kW Weight: 1560 kg Shaft diameter d1: 90 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Length of base: 1170 mm !! Gearbox has no oil cooler !!!

Condition: new, Quick and easy cleaning with the i-mop XXL Pro The i-mop XXL Pro is a highly maneuverable scrubber dryer that weighs only 11.5 kg without batteries and water. This machine is specially designed for indoor use on hard floors. With a working width of 62 cm and a 5 liter fresh water tank, you can clean up to 2300 m² per hour. This makes the i-mop XXL Pro an efficient choice for various cleaning tasks. User-friendly Control Panel The control panel is intuitive and simple, allowing anyone to get started with it. The i-mop cleans significantly better than traditional mops and is faster than conventional scrubbers, especially in smaller areas. The adjustable handle, adjustable to two different heights, allows people of different heights to work comfortably. Mudguards and Battery Pack The splash shields on the sides of the base prevent water splashing during use, helping to ensure a clean and dry environment. In addition, different battery packs and chargers are available, with different voltages and operating times, so you can customize the i-mop to your specific needs (see the last image for more information). Durable Protective Coating The i-mop XXL Pro features a black protective coating, making it durable and suitable for a variety of challenging environments. Use of the i-mop XXL Pro is recommended in five types of environments: greasy areas, swimming pools (chlorine), beach locations (salt), gas stations (gasoline) and the food industry (very salty). This machine offers a unique solution to the cleaning challenges associated with corrosive substances such as chlorine and salt. Other features: - Scrub width: 46 cm, - Mopping width: 50 cm, - Battery working time: about 1 hour, - Waste water tank capacity: 4-6 liters (max. 8 liters), - Fresh water tank capacity: 4 L, Up8Epkc997 - Power source: 2 x Battery 24V, - Batteries: 2 i-power 9 batteries, - Brush type: 2 x disc, - Brush speed: 350 t.p.m. - Traction on: brush, - Brush pressure: 32 kg, - Noise level: 79.6 dB(A), - Dimensions (LxWxH): 47 x 69 x 120 cm, In short, the i-mop XXL Pro is a reliable and efficient scrubber dryer that is perfect for indoor use on hard floors, and is easy for anyone to operate.

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. Bsszlvgx centering block: -prismatic guide accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools *

Condition: new, Year of construction: 2025, Chamber washer 3 stage, mulitmetal, Zone 1 gas, oil or electrical heated, max. 60°C, Zone 1 active zone (degreasing, surface protection), Zone 2 Rinsing, Zone 3 demi rinsing, manual flap or sliding door, Cfeyos0A PLC Siemens.

Condition: used, Static Mixer, Disposable Mixer, Plastic Spiral Mixer -Manufacturer: tsi, Static mixer SULZER QUADRO MGQ 10-19D 15 pieces -Version with Luer-Lock attachment for dispensing needles -Industrial standard connection can also be used for other cartridge systems -Thread: MGQ Series 7/8" - 9 UNC coarse thread Bhnfdy3P -Quantity: 13 bags with 15 pieces each available -Distribution/Price: per bag, minimum order 2 bags -Bag dimensions: 190/130/H40 mm -Weight: 0.2 kg/bag

Condition: good (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 80/PR, turning diameter: 630 mm, spindle bore: 63 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 430 mm, travel distance Z-axis: 490 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, overall weight: 5,500 kg, Equipment: documentation/manual, Lathe used on our production and still connected to electricity with the possibility of checking it. Ucroddixez Number of head positions: 12 Max. torque on the spindle: 1310 Nm Control system: Pronum 630T. Length: 2850 mm Width: 1540 mm Height: 2000 mm

Condition: used, Sinus ruler Uyhltye7F Make Suhl length 100 mm delivered in a wooden box

Condition: new, New from Metech: the i-mop XL! The i-mop is a revolutionary cleaning system that overcomes the challenges of traditional floor cleaning systems by combining the flexibility of a floor mop with the power and speed of industrial scrubbers. In many cases, rooms are still mopped by hand because of the limited flexibility of other floor cleaning machines. Agile and thorough cleaning The i-mop XL Basic offers a solution that thoroughly cleans any room with optimal freedom of movement and ease of use. It is more than just a cleaning machine; it is designed specifically for the cleaner, without limits or restrictions. Easy to transport The i-mop is designed to take up very little floor space when not in use. Store it within easy reach in a closet. Take it up and down stairs with you. Remove the batteries and water reservoir to transport it in the trunk of your car. Flexible and fast The incredibly maneuverable i-mop has a scrubber foot with two super-fast brushes and a working width of 46 cm. The two brushes rotating in opposite directions guarantee smooth operation; you can even operate the device with one hand. Cleans around and under objects just like a mop. Do more with less! The quick-change i-power battery system makes the i-mop a real cleaning workhorse. With 2 sets of i-power 9 batteries, your i-mop never has to stand still. Clean from 9 to 5 or around the clock with a single machine. No cords to trip over or get tangled, just turn on and get to work. Other features: - Scrub width: 46 cm, - Mopping width: 50 cm, - Battery working time: about 1 hour, - Waste water tank capacity: 4 liters, Up8Drqnnpt - Fresh water tank capacity: 8 L, - Power source: Battery 24V, - Batteries: 2 i-power 9 batteries, - Brush type: 2 x disc, - Brush speed: 350 t.p.m. - Traction on: brush, - Brush pressure: 22 kg, - Noise level: 79.6 dB(A), - Dimensions (LxWxH): 50 x 38 x 120 cm, Would you like to know more about the i-mop XL Basic? Download the brochure or contact us, we are happy to tell you more!

Condition: used, Year of construction: 1998, load capacity: 2,200 kg, construction height: 510 mm, construction width: 1,200 mm, Multi-pallet fork Dpjt9F ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: good Description: ISO 3A (51 cm) Capacity 2200 kg Opening range 560-2010 mm Forks 1200 mm Width 1200 mm Year 1998 mm

Condition: new, Year of construction: 2025, Internal dimensions LxWxH 4300x1700x2200mm, Rgym9 Temperature max. 220°C, oil, gas or electrical heated possible, Tracks for hordes waggons possible, Manual or automatic transport usable, flap or sliding doors producable.

Condition: good (used), 6m x 600 thermal oil fryer direct from closed fish factory. Includes most options such as auto canopy lift, Teflon infeed, sediment scraper, programmable control, top hold down belt Fine mesh belt so good for smaller than normal products. B7Aq3T0If

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, Functionality: fully functional, machine/vehicle number: N24LC22085, saw blade diameter: 500 mm, New 2-axis saw line type JIH NC24LS, for sale. In new condition. Sawed a few times for trial. Is fully equipped with all conceivable options, such as roller conveyors on both sides, fold away material supports, servo-controlled spindle feed, Micro lubrication system, chip extractor. This machine is going away, due to not continuing a large project. Therefore we do not need the machine anymore. All factory warranties go with the sale of the machine, as you can read in the enclosed document. Optionally, there is the choice to have the machine placed on site by the supplier. Technical Specifications: - Servo driven spindle feeder, with ball bearing spindle - Saw capacity (HxW) : 125x 210 / 100 x 300mm with saw blade 450mm 75 x 400mm with saw blade 500 mm - Max saw blade size : 610 mm - Max feed stroke length (per step) : 1,100mm - Positioning accuracy : +/- 0,1 mm - Saw spindle speed : 1500 - 3500 rpm (steplessly adjustable) - Saw motor power : 15 Hp - Inverter motor power : 15 Hp. - Servo power supply saw : 1 HP - Servo motor, feed : 1. 2 HP - Touch-screen control : 12 " (Note : In English ) - Min. pressure connection : 6 bar Ist8Wqa - Working height feeding table : 920 mm. - Machine dimensions (LxWxH) : 3500 x 2100 x 1860 mm - Machine weight : 2300 kg - Operation Choice of: Dutch / English / Swedish B1. Micro Lubrication dosing system, mounted: B2. Float minimum signaling C. Drain chute and roller conveyor for automatic (unmanned) operation for small and long products: . D. Drain roller conveyor Right side: E. Set of 5 fold away material supports F. Chip extractor

Condition: used, CNC control, control panel, machining center, server cabinet Bivfdoyow8 -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Condition: excellent (used), Universal length measuring machine for high precision internal and external measurement on prismatic, parallel plane, spherical and cylindrical measuring areas as well as threads. Suitable for measuring pins, ring gauges, plug gauges, thread measurements (inside and outside) as well as for any kind of gauges. Suitable for calibration Labs and measuring chambers in quality control. Application range (internal measurement, up to max.): 230mm Application range (external measurement, up to max.): 300mm Direct application range: 100mm Resolution: 0.01/0.1/1µm Repeatability –range (internal measurement): +/-0.2µm Repeatability –range (external measurement): +/-0.1µm Cvwzk0Ohja Measuring force. 0-5N or 0-12N Wight: 173kg

Year of construction: 1995, Condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 Daowrpd 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: new, Year of construction: 2025, Some components can be choose: - chamber pretreatement with osmosis plant, - Water drier oven, - Powder curing oven, Dyk9Nvl - manual transportsystem inkl. steel frame, - Controler siemens, Additionsal chooseable components possible.

Year of construction: 2021, Condition: refurbished (used), grinding length max. 600 mm Clamping surface of the table 600 x 200 mm Magnet size max. 500 (max. 600) x 200 mm Maximum distance between table surface and grinding spindle centre 495 mm Grinding wheel dimensions (Dxwxd) 250x25x51 mm Grinding spindle drive 5,5kW (three-phase current) with autom. adjustment of the peripheral speed and electronic braking of the grinding spindle D7Vhn93Pa Manual head dresser for cylindrical dressing with dressing dimension compensation Digital path measuring system in Y- and Z-axis Automatic central lubrication We would be pleased to submit you an individual offer for a factory overhauled machine. Ilg+Sulzberger GmbH Werkzeugmaschinen Stuttgart cooperates with Blohm Jung Gmbh Göppingen as sales partner for the region of Baden-Württemberg.

Condition: used, CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg Nzts9

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: Edgebander BATCH 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: Edgebander BATCH 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: Edgebander BATCH 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Dplb27 Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: Edgebander BATCH 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: used, machine/vehicle number: 006013, Type of edging: Thin edge, Thick edge Dpfcyt Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 40 mm Operating Units: 11 nr

Condition: used, machine/vehicle number: 006015, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Dpfcvf Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 40 mm Operating Units: 11 nr