EP ZL-C5, Dweilmachine / veegmachine

EP ZL-C5, Dweilmachine / veegmachine

Condition: ready for operation (used), Year of construction: 1994, Tires: 335/80 R20, bucket volume: 0.7m³, steering: articulated steering, tare weight: approx. 5000kg, operating hours: 12935h. Documentation available. On-site inspection is possible. Gislhcdwev T Appswjt

Condition: used, mileage: 132,600 km, first registration: 06/2005, fuel type: diesel, fuel: diesel, Year of construction: 2005, Please contact John de Koning or Mark de Koning for more information. Golhjv H R I Tscdwwsit

Condition: good (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: P/N159008 S/N 1134512-001, Robatech Concept C hotmelt unit Piston pump Gislhjvgv S Rocdwwjt 4 hose connectors Tank 5L Operating temperature 20 to 200 °C

Condition: used, mileage: 92,586 km, power: 118 kW (160.44 HP), first registration: 10/2014, fuel type: diesel, color: blue, axle configuration: 4x2, fuel: diesel, wheelbase: 1,800 mm, emission class: euro5, Year of construction: 2014, = More options and accessories = - Power take-off (PTO) = More information = Technical information Number of cylinders: 4 Engine displacement: 3,920 cc Maximum front axle load: 4,730 kg Maximum rear axle load: 7,040 kg Dimensions Dimensions (L x W): 540 x 190 cm Weights Empty weight: 6,100 kg Payload: 5,050 kg GVW: 11,150 kg Gielsv H R Itjhcdwwet Condition General condition: average Technical condition: moderate Visual condition: average More information Contact John de Koning or Mark de Koning for more information.

Condition: used, Year of construction: 2011, - 7 pieces - Brand: Dulevo - Type: 75EH sweeper - Year of manufacture: 2004 to 2014 - Year of manufacture: 2004 / 577 hours: € 2350,- - Year of manufacture: 2006 / 1072 hours: € 2550,- - Year of manufacture: 2008 / 725 hours: € 2750,- - Year of manufacture: 2009 / 171 hours: € 2850,- - Year of manufacture: 2011 / 462 hours: € 3150,- - Year of manufacture: 2011 / 390 hours: € 3150,- - Year of manufacture: 2014 / 94 hours: € 3350,- - Drive: Battery - 24 volt Gslhcdwevxky Tjwsit - Battery charger - Sweeping width: 95 cm. - Side brush - Under brush - Collection box - Extraction - Trade-in and transport possible - More photos on our website * Brand: Dulevo * Type: 75EH sweeper * Year of manufacture: 2004 to 2014 * Drive: Battery - 24 volt * Sweeping width: 95 cm.

Condition: excellent (used), Year of construction: 1997, Bridgeport VMC 500/16 Vertical Machining Centre Year: 1997 Control: Heidenhain TNC 370 Table Area: 830 x 360mm 'X' axis Travel: 500mm 'Y' axis Travel: 340mm 'Z' axis Travel: 525mm Giolewif Raehcdwwjt Spindle Taper: BT 40 Spindle Speeds: 7000 RPM Toolchanger: 16 station

Condition: new, MEP band saw machine SHARK 331-1 NC 5.0 Spider All MEP models on request ! Motor power 2,2 kW band opening 340 mm belt dimensions 3650x27x0,9 mm weight 1.240 Kg speed 15 - 100 m/min. infinitely variable cutting area 0° 280 / 260x260 / 330x260 cutting area 45° right 260 / 250x250 / 270x200 Cutting surface 45° left Cutting area 60° right 180 / 170x170 / 170x170 Cutting surface 60° left Description Hydraulic bandsaw fully automatic Miter cuts up to 60° left possible saw band length: 3650x27x0,9 Gielhcschhdiodwwet Single stroke: 600 mm (programmable up to 10m) Simple touch screen operation. Saw arm made of Spheroguss - robust and stable Required floor space 3,4 m² Footprint 1900mm wide x 1800 mm deep For further technical data please refer to the attached PDF document.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Gijlhcsua Tbwodwwst Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. Golevixypshcdwwsit - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: ready for operation (used), machine/vehicle number: 5383KJ002840, Condition Used Stock Number 60544 This listing is for the Eeppendorf thermostat C. The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Gielhsv R Rlyjcdwwot Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: good (used), Volume: approx. 68 liters Usable volume: 55 liters Suitable for solid, liquid or soft products Gjlouk Ez Eohcdwwsit Motor power: 2.2 / 4.0 / 5 kW with jacket Mobile / tiltable Parts in contact with product made of stainless steel Manufacturer: Stephan Year of construction: 1987 Floor Space: 120 x 80 x 170 cm

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm dimensions of saw-band 3650 x 27 x 0,9 mm band speed 15 - 100 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round li. 260 / re. 200 mm capacity 45 degrees: square li. 250 / re. 180 mm capacity 45 degrees: flat li. 270x200 re. 200x160 mm capacity 60 degrees: round li. 180 mm capacity 60 degrees: square li. 170 mm capacity 60 degrees: flat li. 170 x 170 mm motor 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,9 x 1,8 m Giolhcdweuia D Rjwet Control Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.

Condition: new, MEP TIGER 352 NC 5.0 [Fully automatic] Article number TI352NC motor power 3,0 kW belt opening 190 mm belt dimensions 350x32x2,5 weight 680 kg Speed 15 - 90 m/min. Cutting surface 0° 115 / 95 / 180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel. The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness. FEATURES: -New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position. -NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred. -NEW: Gslhcochhhdjdwwsit

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm Gslhcdjfg E H Eowweit capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm Gslhcdjvixwzowwsit capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm dimensions of saw-band 3650 x 27 x 0,9 mm band speed 15 - 100 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round li. 260 mm capacity 45 degrees: square li. 250 mm capacity 45 degrees: flat li. 270 x 200 mm capacity 60 degrees: round li. 180 mm capacity 60 degrees: square li. 170 mm capacity 60 degrees: flat 330 x 260 mm motor 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 1,9 x 1,8 m Control Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame - Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard. Vice closes / opens automatically, The saw arch is automatically returned to the start of the cut) - Fully automatic operation (10 programs, each with different Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 / 600 mm. Execution of up to 10 combined programs in one cycle. Three different cutting cycles can be selected - Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision Giolhcjppgdtodwwjt - Large-sized deflection discs, adjustable made of cast steel with integrated belt circulation control - Dynamic cutting pressure control (variably programmable, control via Stepper motor due to the torque monitoring of the belt drive) - Precise adjustment of the cutting feed with information in mm / min. - Frequency converter for stepless drive of the tool - X-axis (material feed) via recirculating ball spindle with at least remaining piece 210 mm - Control (Windows CE based) with 7 "touch screen and additional soft- Buttons, backlit display to show all Machine parameters and messages in plain text: Number of cuts (programmed / executed) / cutting speed / lowering speed / preselectable Cutting pressure (in amps) / cutting time / power consumption of the saw band motor / Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y- Axis) / feeder position (X-axis) / alarms / faults (description and Causes) / diagnostics ... - Saw band tension with band tension control and indication on the display by means of electronic converter - Base with door - Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area, removable coolant tray 100 liters - Coolant gun for cleaning the machine - Vice with quick adjustment and exchangeable clamping and Stop jaws - Chip removal brush for cleaning the saw band

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Giolhcdochkwhowwjt Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Gelhcefg Rlcodwwoit Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Gslsvix Aqjhcdwweit Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: new, Model Name Gslhcdwel Sva Iswsit SHARK 331-1 NC 5.0 SPIDER

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces . and a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment Giolsvix Adshcdwwot * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in the network with a residual current device (FI), this should be universally sensitive and not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, mileage: 536,935 km, power: 426.59 kW (580.00 HP), first registration: 03/2018, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 6x4, fuel: diesel, wheelbase: 4,750 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, crane, cruise control, differential lock, hydraulics, navigation system, onboard computer, parking heater, retarder, sleeping cabin, traction control, trailer coupling, Internal number for customer inquiries: 4-266 Scania R580 6x4 short timber truck with Epsilon M12Z 8.3 loading crane and optionally available a PAVIC 2-axle turntable short timber trailer HTA 20 66Z. The stated price of €105,990.00 net refers to the truck only! PAVIC 2-axle turntable short timber trailer HTA 20 66Z Trailer price €18,990.00 net Price as a complete truck/trailer combination: Upon request! Vehicle description: OptiPa bogie body 4 OPTIPA bogies with 8 OPTIPA AL10 load posts Sturdy aluminum bulkhead TRUCK: ALCOA DURA BRIGHT ALUMINUM RIMS!!!! LEATHER INTERIOR!!!! LED daytime running lights, fog lights, position lights, and taillights Taillight canopy Leaf/air suspension Drivetrain: 6x4 Wheelbase: 4,750 mm Tires: Front axle: 385/65 R22.5, Rear axle: 315/80 R22.5 Engine: 580 hp V8 Opticruice automatic transmission with clutch pedal Differential lock in rear axle Tow bar: 40 mm diameter Central locking with remote control Electric glass sunroof All exterior mirrors electrically adjustable and heated Auxiliary heating Air conditioning Digital axle load indicator in the cab for air-sprung axles Display in the instrument panel for trailer data (axle load) Fully retractable cooler box under the sleeping berth Full brake assist Leather-covered multifunction steering wheel, height and tilt adjustable, with park position Europe navigation system Smartphone Integration Infotainment control Lane departure warning Attention warning and much more Trailer description: 2-axle bolster trailer 4x OptiPa bolsters 8x OptiPa SL load slings Chassis length approx. 6600 mm Front overhang approx. 710 mm (turntable) Screwable hook on the bolsters for load securing Payload 14750 kg Total weight technically possible 22,000 kg EBS / ABS Air suspension with safety cables, leaf springs available upon request 2 x 11t SAF OFF-Road axles Steering ring with double row of balls, max. load 20 tons Front lifting cable Smartboard/TIM/Infocenter Clearly visible front signal light system to detect maximum bellows pressure LED lighting Gijlhcdsvbghrowwot LED work lights High-quality KTL paint finish - coating included Burn-in process Twin tires: 275/70 R 22.5 with branded tires on aluminum rims This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 4,790 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, fork carriage width: 1,120 mm, fork length: 1,070 mm, total length: 2,400 mm, engine type: ---, drive type: Elektro, construction width: 1,200 mm, net weight: 3,484 kg, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 Mast Type: Triplex Technical Condition: Good Front Tires Type: Super Elastic Gijlhcewiyx Esdwwet Front Tire Size: 2 x 23x9-10 Front Tire Condition: 80-100% Rear Tire Type: Super Elastic Rear Tire Size: 2 x 18x7-8 Rear Tire Condition: 80-100% Battery Year: 2017 Individual auxiliary hydraulics, sideshift, load backrest, 2 front work lights, 2 rear work lights

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 5,798 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, fork carriage width: 1,120 mm, fork length: 10 mm, total length: 2,400 mm, engine type: ---, drive type: Elektro, construction width: 1,200 mm, net weight: 3,470 kg, Electric 4-wheel forklift Gieljwiyxxshcdwwst Load center: 500 ISO class: ISO class 2 Mast type: Triplex Technical condition: Good Front tires: Type: Superelastic Front tires: Size: 2 x 23x9-10 Front tires: Condition: 80-100% Rear tires: Type: Superelastic Rear tires: Size: 2 x 18x7-8 Rear tires: Condition: 80-100% Battery year of manufacture: 2017 Individual auxiliary hydraulics, sideshift, load backrest, Blue Spot front and rear, 2 front work lights, 2 rear work lights

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 5,511 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, fork carriage width: 1,120 mm, fork length: 1,070 mm, total length: 2,400 mm, engine type: ---, drive type: Elektro, construction width: 1,200 mm, net weight: 3,489 kg, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 Mast Type: Triplex Transmission: Three-Phase AC Technical Condition: Normal Front Tires Type: Super Elastic Front Tire Size: 2 x 23x9-10 Front Tire Condition: 80-100% Rear Tire Type: Super Elastic Rear Tire Size: 2 x 18x7-8 Rear Tire Condition: 80-100% Gjlhewiyxrscdwwsit Battery Year: 2017 Individual auxiliary hydraulics, sideshift, load backrest, Blue Spot front and rear, 2 front work lights, 2 rear work lights