Electric 4-wheel forklift

Doosan B100NS

Condition: used, Year of construction: 2024, load capacity: 10,000 kg, lifting height: 4,750 mm, mast type: triplex, construction height: 2,900 mm, drive type: Elektro, Electric 4-wheel forklift Dpmxsv Mast type: Triplex Technical condition: normal

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: i-Series, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travels X-axis: 1,270 mm Bsbhvs7Mhv0 Y-axis: 670 mm Z-axis: 625 mm Control system: i-Series Fanuc Work spindle Max. Speed: 8,000 min-¹ Drive units: 11 / 15 kW Max. Torque: 191 Nm Tool holder: SK / ISO 40 Work table Table clamping surface: 1,400 x 670 mm T-slots: 5 T-slots - width: 18 H8 mm T-slots - distance: 125 mm Max. Table load: 1,000 kg Distance between spindle nose and table: 150 - 775 mm Max. Workpiece height: 580 mm Tool magazine Number of tool positions: 30 positions Tool holder: SK / ISO 40 Max. Tool length: 300 mm Max. Tool diameter: 80 / 125 mm Max. Tool weight: 8.0 kg Tool - tool change time: 1.3 s Feed rates Rapid traverse (X / Y / Z): 30 / 30 / 24 m/min Feed speed: 1 - 12,000 mm/min Power requirement Total power requirement: 40 kVA Machine weight and space requirement Machine weight: approx. 9.0 t Space requirement (L x W x H): 6.0 x 5.0 x 3.5 m EQUIPMENT documentation Coolant unit Chip conveyor Oil mist extraction Signal lamp Interface 4th axis Tool magazine Electric handwheel Measuring button Various tool holders approx. 40x Vice 2x

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,441 h, General Data Measurements width 2158 mm Measurements depth 2615 mm Measurements height 2985 mm Machine weight 5000 kg Control Unit Brand FANUC Model i Series Main Drive Number of spindles 1 Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 800 mm Y-Axis Movement 450 mm Z-Axis Movement 510 mm Table Outer length 1000 mm Dqnueh Outer width 450 mm Tslots size 3 Distance between 125 mm Tools Slots in storage 60 Max weight 8 kg Max tool diameter 80/125 mm Max tool length 300 mm Type of tool holder ISO 40 Additional Equipment Tool magazine with 60 positions This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Condition: good (used), Year of construction: 2007, Doosan Lynx 220 LMA with Fanuc control Bsegmdvuoow - tailstock - chip conveyor - Parts conveyor belt - Collet chuck (52) Hainbuch - 5 meter loader Top Automazioni

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i main spindle: max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm travel: x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm In our opinion, the machine is in very good used condition and can be inspected Cnuqzitghm under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Year of construction: 2014, Condition: excellent (used), Machine travel (X-axis) 1020mm, (y axis) 540mm (z axis) 510mm X Axis Rapid Traverse 36 m/min Y Axis Rapid Traverse 36 m/min Z Axis Rapid Traverse 30 m/min Max. Spindle Speed 12000 r/min Max. Spindle Power 18.5 kW Max. Spindle Torque 353.2 N·m Table Length 12000 mm Table Width 540 mm Max. Table Weight 800 kg No. of tool station 30 Machine Length 2412mm, Width 3110mm and Height 3143mm Weight 6500kg Spindle nose: MAS BT 40 Feed range 1 - 15000 mm/min Fanuc Doosan I Series control Km2U3Jdg RenishawTouch Probe 4th axis ready

Condition: good (used), Year of construction: 2015, 700mm Swing, 550mm max. machining diameter, 2093mm between centres, 2000rpm spindle, 117mm bar capacity, 10 station turret 26kW spindle motor, FANUC 32i control, 381mm 3 Jaw Power Chuck, Dqmnjx Tailstock, Swarf Conveyor, Coolant.

Condition: used, Year of construction: 2007, Doosan Puma TT1500 SY Year of construction 2007 Control system: - Fanuc 18i-tb Main spindle: - 35 - 6000rpm. - Spindle bore 62mm Cl2Zurk0Wk Turret: - 2 times 12 stations of which all with driven tools - Speed of the driven tools 5000 rpm Accessories - various driven tools approx. 8 pcs. - Parts catcher + chip conveyor - LNS bar loader 3m. Defects: -The servo/encoder of the CH2 turret is faulty. Availability: - Immediately

Condition: ready for operation (used), Year of construction: 2020, Control Unit Model SINUMERIK 828D Brand SIEMENS Main Drive Number of spindles 1 Spindle speed range 4500 Movement X-Axis Movement 205 MM X-Axis Working Feed 30 M/MIN Z-Axis Movement 560 MM Z-Axis Working Feed 36 M/MIN Cnxetpjidq Media Chip conveyor Yes This 3-axis Doosan Lynx 2100LMB lathe was manufactured in 2020. It features a SIEMENS SINUMERIK 828D control, a spindle speed of 4500 rpm, and a max turning diameter of 300 mm. The machine offers a max turning length of 510 mm and includes driven tools and a chip conveyor. The Doosan Lynx 2100LMB machine we have for sale is a reliable choice for efficient and precise metalworking. Reach out for more information about this lathe. Application Types Turning

Condition: good (used), Year of construction: 2021, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, Equipment: chip conveyor, rotational speed infinitely variable, Used Doosan VC 630/ 5AX machine with few hours Year of construction 2017 Commissioning 2021 Former demonstration machine Control Heidenhain TNC 640 Linear guides in all three axes Integrated rotary and swivel axes, clamping surfaces - diameter 630mm Flushing system to support chip removal 20 bar high-pressure cooling through the spindle, form A Oil separator for coolant cleaning (oil skimmer) RIGID TAPPING - tapping without compensating chuck 40-position tool magazine as double-arm gripper BIG PLUS tool holder, SK40 spindle cone, DIN 69871 A, DIN 69872 tightening bolt Speed range 20,000 min", infinitely variable Spindle oil cooler Kinematic Opt. Spindle speed and power display Dqnyov User-friendly work area cladding Crane loading of the work area possible Swivel control panel Telescopic covers in the X, Y and Z axes Rapid traverse in the X, Y and Z axes 40/40/36 m/min Spiral chip conveyor in Y direction Coolant supply from the 360L tank via adjustable coolant nozzles on the spindle nose Tool length measurement Electronic handwheel (transportable) Usable table load of 500 kg Auto power off (automatic switch-off of the machine) Workpiece shower or cabin rinsing Ball screw operation with cooled lock nut XYZ Hinged belt chip conveyor, rear LNS Automatic workpiece measurement RMP 60-Q (Siemens) with radio transmission from RENISHAW Air through the spindle WORKING AREA X-axis 650mm Y-axis 765mm Z-axis 520mm A-axis (swivel table) 150 (+30 -120) ° C-axis (turn table) 360° Spindle cone is to be replaced (offer for approx. 2,500€ available) and there is an error from a sensor on the tool changer. The machine is still under power and can be inspected by appointment in the Neuwied area. The buyer takes care of loading and transportation. Technical data, accessories and description of the machine are non-binding

Condition: good (used), Year of construction: 2013, The machine is in good technical condition, after previous agreement the possibility of testing. We have two machines for sale. Cquyvrtca0

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm Dqlrad output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: good (used), Year of construction: 2018, Swing over bed 850mm, Swing over cross-slide 670mm, maximum machining diameter 420mm, maximum machining length 2125mm, bar capacity 102 mm, Y axis -/+ 65mm, 12 station turret, spindle speed 2,800 rpm, milling speed 5,000rpm, Fanuc I control, Dpgq32 tool setter, high pressure coolant , 12” 3 jaw and swarf conveyor.

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, turning diameter over cross slide: 900 mm, turning length: 2,001 mm, turning diameter: 650 mm, spindle bore: 166 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 45 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, total height: 2,170 mm, total length: 6,750 mm, total width: 2,250 mm, overall weight: 11,750 kg, bar passage: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe “DOOSAN mod. PUMA 480L” with Fanuc 21i-TB CNC complete with “AUTOBLOK K5Z” steady rest Dqliaj

Condition: good (used), Year of construction: 2007, The machine is in good technical condition, after previous agreement the possibility of testing. The machine is after overhaul of the spindle and lubrication system. Cone 40. Dqntyv

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Cbpriuhx Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: like new (used), The machine is in good technical condition, after previous agreement the possibility of testing. The machine has worked 1008 hours Dqnsxr

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, Easpgwl 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 32iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2009, 630mm swing, 409mm maximum machining diameter, 1030mm maximum machining length, bar capacity 76mm, C axis 0.001-degree, spindle speed 3,500 rpm, E2Povji milling speed 5,000 rpm, 12 station turret, 22 kw motor, 250mm chuck. Fanuc I series control, tool setter, swarf conveyor.

Condition: excellent (used), Year of construction: 2016, 320mm max cutting diameter, 510mm swing, Br73Pq803G3 305mm max turned length, 51mm bar capacity, 11kW motor, Fanuc i-Series Control, 3 Jaw Chuck, Tool setter, Parts Catcher, 12 Station turret, spindle speed 5000rpm

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, Ynyptgdk 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant Swarf Conveyor.

Condition: good (used), Year of construction: 2013, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Isucsnu Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 2008, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Brvacuvkoze

Condition: good (used), Year of construction: 2015, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, sub-spindle speed 4,500 rpm, Dpoidf milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, parts conveyor .

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC spindle taper BT40, spindle power 18.5 kW, Dqks3B Fanuc control, coolant, swarf conveyor and probe.