Milling machines

DECKEL FP4NC

Condition: excellent (used), Year of construction: 1985, x-travel 600 mm y-travel 500 mm z-travel 500 mm spindle taper 40 SK turning speed range 18 - 6300 U/min paper band filter 515 mm table load 350 kg air temperature of the exhaust valve 0,001 mm rated capacity boring motor 3600 x 4900 mm hollow in the drive pipe 8 kW 3300 kg 475 kg total power requirement 380 50 23 kW weight of the machine ca. t dimensions of the machine ca. m Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: E2Po3Z3 * Rigid angle table * Coolant facility

Year of construction: 1985, Condition: used, machine/vehicle number: 2810-3870, Fully functional Electric handwheel Dialog 4 control Ci8Afrhx Many optional accessories Documentation available Electrical documentation available

Year of construction: 1983, Condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm Harq0Iz movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: used, Year of construction: 1986, machine/vehicle number: 16878, x-travel:560 mm y-travel:500 mm z-travel:450 mm Bjeqat7Rh0

Condition: used, machine/vehicle number: 2810 - 4271, x-travel:500 mm y-travel:400 mm z-travel:450 (390) mm surface of table:710 x 430 mm spindle speed max.:40 - 4000 U/min feed range:10-2000 mm/min rapid traverse:4,0 m/min spindle drive motor:4,0 kW tool taper:SK40 Hsqh78V control:CNC Contour 3 power capacity:9 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,4 x 2,3 x 2,3 m Deckel FP4 NC Machine for Medium - Heavy range use. - Spindle Head can be swiveled 90° (left or right) - Universal Work Table ( 710 x 430 mm ) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872. - Deckel Contour 3 CNC control Systems. - Portable Electronic handwheel and Handheld operating unit for easy Setting and control. - Powerful 2.2 kw Siemens Axis Servo motors and 4.0 kw Motor for Main Spindle. The machine has Central Lubricant system, Seperate Power cabinet, Enclosed Chip tray and Splash cabin

Condition: ready for operation (used), Controls: Deckel DIALOG 11E, tools are available, number of operational hours unknown, was maintained regularly, an inspection is possible. Bo8Nwuyi

Condition: good (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, number of slots in tool magazine: 60, TECHNICAL DETAILS Control Name: Heidenhain Mill Plus Dqkr9J X-travel: 800 mm Y-travel: 700 mm Z-travel: 600 mm Plate changer: 2-fold Tool changer: 60-fold Spindle speed: 18,000 rpm Interface: SK 40 EQUIPMENT - Infrared sensor - Flushing gun - Internal cooling lubricant supply (IKZ) - 600-liter tank with paper band filter

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Grundig Dialog 112 Travel X: max. 700 mm Travel Y: max. 550 mm Travel Z: max. 500 mm Table size: 900 × 550 mm max. load: 800 kg Feed speeds Feed speed X, Y, Z: max. 10 m/min rapid traverse X, Y: max. 30 m/min Rapid traverse Z: max. 20 m/min Spindle and tool Spindle clamping: hydraulic Mounting: SK 40 max. speed: 15,000 rpm Tool magazine: 30 tools max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 12 kg Tool changer: Vertical double gripper Tool measurement: Blum 3D probe: Renishaw OMP 60 MACHINE DETAILS Space requirement: 3,530 × 3,300 mm Transport dimensions (machine only): 2.4 × 3.8 × 3.0 m Weight: approx. 7,000 kg Coolant system Coolant system: IKZ Knoll RF 200/1100 F60-1 EQUIPMENT - Hydraulic spindle clamping for precise tool holding. - Vertical double gripper for fast tool change. Ces3Irwvbm - Renishaw OMP 60 3D probe for precise workpiece measurement. - Integrated cooling system for optimum machining conditions.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,487 h, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 18,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Number of axes: 3 Control: HEIDENHAIN iTNC530 X-travel: 1,200 mm Y-travel: 800 mm Z-travel: 560 mm Table size: 1,200 x 850 mm Max. weight on the table: 1,800 kg Spindle Dqlqnv Spindle speed: max. 18,000 rpm Spindle holder: HSK63 Feed rate Rapid traverse speed: 90 m/min Tool changer Tool changer (ATC): 30 positions MACHINE DETAILS Hours under power: 30,790 h Hours in production: 19,487 h EQUIPMENT - Chip conveyor - Approx. 50 HSK63 tool holders - Complete documentation

Condition: excellent (used), Year of construction: 1998, operating hours: 23,431 h, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 560 mm, table width: 1,000 mm, table length: 600 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No minimum price - guaranteed sale at the highest bid! Collection in week 3 2025 Highlights - High-precision machining thanks to digital technology - Versatile application options thanks to flexible tool holder - High productivity with fast rapid traverse and large tool magazine - Robust design for stable and precise machining TECHNICAL DETAILS X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Feed rate Motors: AC servo motors in digital technology for X-, Y- and Z-axis Speed: 20 - 10,000 mm/min, infinitely variable Rapid traverse X- and Y-axis: 26 m/min Z-axis: 20 m/min Spindle Speed: 20 - 12,000 rpm, infinitely variable Tool clamping: hydraulic/mechanical Spindle holder: SK40 or HSK Tool holder: Taper hollow shank HSK E50 / HSK A63 Tool magazine: 20 places Dqobvl Work table Clamping surface: 1,000 x 600 mm Distance T-slots: 63 mm Number of T-slots: 9/14 H7 Max. table load: 400 kg MACHINE DETAILS Connected load: 26 kVA Operating voltage: 400 V, 50 Hz Switch-on time: 52,854 h Operating hours: 23,431 h

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, Functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, New spindle installed in 2024! TECHNICAL DETAILS X travel: 635 mm Y travel: 510 mm Z travel: 460 mm Table dimensions: 560 x 790 mm Speed: 14,000 rpm Tool holder: SK40 Number of tool positions in the magazine: 60 MACHINE DETAILS Weight: 5,500 kg Connected load: 35 kVA Operating voltage: 400 V, 50 Hz Operating hours: approx. 71,000 h Spindle hours: approx. 43,000 h Cjgockrjry EQUIPMENT - Chip conveyor - ShopMill - Paper filter

Condition: used, Univ. Pan tilting rotary table cover fits FP 2 L or FP 3 L or FP 4 L Nr. 2314-0301 year: circa 1975 Clamping surface: 1000 x 520 mm -6 clamping slots 16 mm, gap 90 mm -Mounting plate horizontally to the right and left scales can be rotated by 45 degrees -by / the machine tilting +/-15 degrees -Swivel +/-15 degrees Bd9G39Sww2 permissible load of up to 1000kg Weight: 400kg good condition

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: Heidenhain Mill Plus X-travel: 600 mm Y-travel: 700 mm Z-travel: 600 mm Pallet changer: 2-fold Tool changer: 60-fold Spindle speed: 12,000 rpm Interface: SK 40 Dqkr07 EQUIPMENT - Infrared sensor - Flushing gun - Internal cooling lubricant supply (IKZ) - 600-liter tank with paper band filter

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) overhauled with CE geometric acceptance with test report with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - SK 40 vertical milling head - Coolant device - Operating instructions CE and safety equipment: - New switch cabinet in accordance with current safety regulations - Cover cap on the vertical milling head with electrical fuse protection - Feed protection hood with electrical fuse protection - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons Nciwv - New documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), Internal article no.: 24100 Dqook9 Universal milling machine Cover FP1 Including extensive accessories. Dividing head with jaw chuck D160mm (can be clamped horizontally and vertically) Counter holder Machine vice (jaw width 100mm) SK40 tool holders Additional tightening rod S20x20 An M16 tightening rod is currently installed. The machine is fully functional and can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2012, Control Heidenhain iTNC 530 Dqompt Travel X/Y/Z 750/600/560 mm Speed 18000 1/min Tool magazine for 30 tools HSK 63 IKZ 80 bar Clamping area 950 x 650 mm Air-conditioned interior Measuring probe suction unit Chip conveyor Numerous tool holders

Condition: good (used), Year of construction: 2007, Cover Maho DMG DMU 70eVolution 5Axis simultaneous Machining center CNC Csdh92P0D3 Manufacturer: DMG Deckel Maho Type [ type]: DMU 70eVolution Control unit: Heidenhain iTNC 530 Incl. handwheel/handwheel Year of construction: 12/2006 - erneuert/renewed Spindle - IKZ integrated cooling system for water 40bar and air (both possible-both possible) Travel X/Y/Z 750/600/520 mm B-axis 0 to 180° degrees C-axis n x +-360° degrees Table load up to 350 kg Spindle speed range 20 to 18,000 1/min. Tool holder SK 40 DIN 69871 Weight [weight]: 10,000kg Complete documentation is available. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Condition: good - ready for demonstration Delivery: ex warehouse - as inspected Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 2101-1876 Year of construction 1981 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Bc9Zlw2Pu0 Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW pole-changing Mains connection 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN type TNC 113 - stepless feed in the X- and Z-axis - Spindle speed via 2 motor speeds and 8 gear stages - Pinole displacement on the vertical milling head 60 mm - Vertical milling head can be swiveled - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Central lubrication VOGEL - adjacent switch cabinet - Original chip tray to be placed on the machine base - Work light Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 750 kg very good condition

Condition: good (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Control: Heidenhain Mill Plus X-path: 1,250 mm Y-path: 880 mm Z-path: 800 mm C-axis: as pallet carrier Work table Pallet: 1,000 x 800 mm Pallet changer: 2-fold Spindle Spindle speed: max. 12,000 rpm Interface: SK 40 Tool system Tool changer: 120-fold EQUIPMENT Chp3Yy2Kie - Probe - C-axis as pallet carrier - Head h/V - Chip conveyor - suction unit - Rinsing gun - IKZ (internal coolant supply) - 600 liter tank with paper belt filter

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: A (FP 1) overhauled with CE geometric acceptance with test report with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - SK 40 vertical milling head - Coolant device - Operating instructions CE and safety equipment: - New switch cabinet in accordance with current safety regulations - Cover cap on the vertical milling head with electrical fuse protection - Feed protection hood with electrical fuse protection - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons - New documentation for machine and control cabinet - CE declaration of conformity Gnounhfk0

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Universal milling machine Deckel FP4M with 3 - axis digital display Heidenhain Super condition !!! Technical data: >> Year of construction 1987 Machine no. 2203-2880 >> Rigid angular table (newly planed) >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : Cr20Qirkeg We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs very smoothly even at maximum speeds. A reliable and user-friendly machine. An oil change has been carried out. The FP4M comes from a small business and was only used for the production of individual parts. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the machine on site under power.

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm Crqmp8Q9Zm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Condition: good (used), Universal machining center CNC DMU 70 VL Lid Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Type [ type]: DMU 70 VL Steuerung [control unit]: Heidenhain TNC 430C Construction year: 09/2002 Travel path: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ Internal coolant supply: 30 bar Tool changer: 2 x 32 places Cscm9S8Bk0 Tool holder: SK 40 according to DIN2080 Coolant system: Knoll Chip conveyor: 2 units Weight: 12.800kg Space required [needed space ]approx. (L x W x H): 5.3m x 2.75m x 2.75m Further information: - CNC 5-axis machining center universal - 2 pcs. NC rotary tables with swivel axis - Clamping surface rotary axis (rotary axis): Ø 700 mm x 500 mm - Max. load (centered): 350 kg Complete documentation is available. Inspection under power can take place at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis Rf73R - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 71.201.659, travel distance X-axis: 501 mm, travel distance Y-axis: 401 mm, travel distance Z-axis: 401 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS X-travel: 501 mm Y-travel: 401 mm Z-travel: 401 mm Cksiuucnim Control: Heidenhain TNC 124 Spindle Spindle holder: SK40 Spindle speed: max. 4,500 rpm Work table Table size: 700 x 500 mm