English
German English French Dutch Italian Dutch Polish Turkish Czech Swedish Greek Hungarian

DECKEL Fine boring head
Deckel Feinbohrkopf

Fixed price plus VAT
1,350 €
Type of offer
Used
Location
Kaina 2, 94094 Rotthalmünster, DE

MACHINE DATA

Machine type:
DECKEL Fine boring head
Manufacturer:
Deckel
Model:
Feinbohrkopf
Condition:
good (used)

PRICE & LOCATION

Price:
1,350 € Fixed price plus VAT
Location:
Kaina 2, 94094 Rotthalmünster, DE Germany

LISTING DETAILS

Listing ID:
A702-675
Update:
30.07.2022

DESCRIPTION

DECKEL Feinbohrkopf fuer Deckelfraesmaschinen

Nr. 2021 – 1910 Farbe: Grau
Innenkegel d. Bohrspindel : Normk. 40
( SK 40 – Anzug ueber Saegegewindesp. Deckelversion )
Pinolenspannung fuer Spannzangen bis 25 mm
Senkrechtverstellung: 100 mm
23 Normdrehzahlen im Bereich v. 40 –6300 U/min
6 Bohrspindel-Vorschuebe: 0,01;0,02;0,03;0,04;0,06;0,12 mm/U
Bohrkopf drehbar um je 90°
Cpxx83t
Gewicht: ca. 58 Kg
Passend fuer alle Deckelmaschinen ( bei FP1 mit Untersatz )
und fuer Deckel LKDB Koordinaten - Bohrm.
Deckel Bestellnr. fuer Feinbohrkopf
2021 000 000

SELLER

Maschinenhandel Stumpf D

Contact person: Herr Dieter Stumpf

Kaina 2

94094 Rotthalmünster, Germany

Telephone:
Contact person:
Mr Dieter Stumpf
Machine ID:
A702-675 on Werktuigen

Last online: A week ago

Registered since: 2010

25 listings online

Logo
Die Fa. Maschinen Stummpf wurde 1984 als OHG gegründet und am 1.1.2009 in eine GMBH weiter geführt,langjährige
Erfahrung im Maschinenhandel serioser und
zuverlässlicher Partner im An-u.Verkauf von Maschinen , zudem werden auch Reparaturen und Montagen v. Maschinen durchgeführt,
jetzt wird die Firma unter den Namen Maschinen Stumpf D Dieter Stumpf Maschinenhandel
als Einzelunternehmen weitergeführt
Steuernr. 153/168/00812

Send inquiry

us
Germany
Austria
Switzerland
United States
United Kingdom
France
Belgium
Spain
Mexico
Italy
Netherlands
Poland
Russian Federation
Belarus
Ukraine
Estland (Reval)
Turkey
New Zealand
Ireland
Czech Republic
Denmark
Finland
Sweden
Norway
Malta
Luxembourg
Greece
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Macedonia
Bosnia and Herzegovina
Israel
Egypt
India
Indonesia
South Korea
Japan
Thailand
Malaysia
Vietnam
China
Taiwan
Iran
Bangladesh
Afghanistan
Attention: Your request will be forwarded to all dealers in this category. This will allow you to receive many offers!
The inquiry could not be sent. Please try again later.

TELEPHONE & FAX

Telephone: +49 8533 8539649
Fax: +498533970629
Telephone:
Contact person:
Mr Dieter Stumpf
Machine ID:
A702-675 on Werktuigen
These listings may also fit your interest.
Call
Dieburg Germany
2010
excellent (used)
for sale is a used 5-axis machining center from DMG. DMG DMU 50 eco (3+2) Offer details: Control SIEMENS Year of manufacture 2010 Switch on time: 40424h Spindle time: 25072h Last spindle change: Sep. 2021 Travels: X 500 mm Y 450 mm Z 400 mm B -5/+110° C 360° Spindle speed - 8,000 rpm. Dzpvsq CNC - swivel rotary table 630 mm x 500 mm Tool changer 16 compartment SK 40 interface Chip conveyor
DECKEL SO DECKEL SO DECKEL SO
more images
3
Call
Staufenberg Germany
1989
good (used)
Graver grinding machine make DECKEL type SO Machine. # 89-24422 Year of manufacture 1989 Technical data: gr. radius to be ground 10 mm gr. lateral displacement of the cutter receptacles 10 mm gr. longitudinal displacement of the cutter holder 40 mm gr. adjustable angle of relief 45 gr. bore of the collet 17,5 mm Grinding spindle speed 4500 rpm. drive power 0,25 kW dimensions L X W x H 500 x 420 x 1400 mm weight approx. 67 kg with - 5 collets cover S 20: 6, 8, 10, 12 + 14 mm - without the shown ...
DECKEL FP 4 NC DECKEL FP 4 NC DECKEL FP 4 NC DECKEL FP 4 NC
more images
4
Call
Grenzach-Wyhlen, Germany Germany
(dealership location)
1988
used
x-travel 560 mm y-travel 500 mm z-travel 450 mm turning speed range - stepless 31 - 5000 U/min taper ISO 40 / 69871 A quill stroke 80 mm feed speeds infinitely variable 2 - 6000 mm/min rapid traverse 6000 mm/min table surface area 900 x 530 mm power capacity 7,5 kW total power requirement 15 KVA weight of the machine ca. ca.2,6 t Optical condition: good Mechanic: good 380 V, 50 Hz * CNC control Deckel Dialog 11, 3D path control with screen graphics * Hydraulic tool clamping * Vertical h...
DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V DECKEL MAHO DMU 70 V
more images
9
Call
Oelde, Germany Germany
(dealership location)
2000
used
x-travel 710 mm y-travel 520 mm z-travel 520 mm control TNC 430 Heidenhain Main spindle: turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 / 15 kW tool taper HSK-A63 NC-Tilting round table: table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° rotation range C: 360 ° tool magazin: number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm total power requirement 40 kVA weight of the...
DECKEL FP 1 DECKEL FP 1 DECKEL FP 1 DECKEL FP 1
more images
4
Call
Niederlangen, Germany Germany
(dealership location)
used
x-travel 300 mm y-travel 150 mm z-travel 340 mm feed - longitudinal/cross 10 - 500 mm/min spindle turning speed range 40 - 2000 U/min table-size 600 x 210 mm tool taper MK 4 Hlkfvcpvc total power requirement 1,0 / 1,4 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,0 x 1,1 x 1,6 m
Call
Bremen, Germany Germany
(dealership location)
2001
used
x-travel 880 mm y-travel 630 mm z-travel 630 mm Control Heidenhain TNC 430 table surface area 1250 x 700 mm rotary table dia. 700 mm milling-head swivable +/- tool adaptor BT 40 turning speeds 20- 12000 U/min power capacity - milling spindle 10/15 kW max. torque on the spindle 130 32 St. rapid traverse 30 m/min table load 0,6/0,35 t range L-W-H 3,5 x 2,2 x 2,41 m weight of the machine ca. 9,0 t 5 axis machining centre with swiveling head and integraded round table - round table - swi...
DECKEL DMC 100 V hi dyn DECKEL DMC 100 V hi dyn DECKEL DMC 100 V hi dyn DECKEL DMC 100 V hi dyn DECKEL DMC 100 V hi dyn
more images
5
Call
Karlsbad Germany
2001
used
x-travel:1000 mm y-travel:800 mm z-travel:500 mm table-size:1250 x 800 mm Cc3g2inkxx control:TNC 426 M HEIDENHAIN turning speeds:18.000 U/min taper ISO:40 rapid traverse:50 m/min tool change unit:30 table load capacity:1200 kg spindle:15 / 10 kW total power requirement:40 kVA weight of the machine ca.:9 t IR touch probe HEIDENHAIN TS 632 chipconveyor, mode 4 el. handwheel HEIDENHAIN HR 410, TFT monitor approx. h programm ON , approx. h main swich ON
Deckel FP3A Deckel FP3A Deckel FP3A Deckel FP3A Deckel FP3A
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
used
Rotary encoder, tachometer, encoder -Spare part comes: from a machining center cover type FP3A -Number: 3x speedometer available -Price: per piece Daxy0y8tw -Dimensions: 83/122/H95 mm -Weight: 1.1 kg
DECKEL DC 40 DECKEL DC 40 DECKEL DC 40 DECKEL DC 40 DECKEL DC 40 DECKEL DC 40
more images
6
x-travel 635 mm y-travel 500 mm z-travel 630 mm Control Siemens Sinumerik 8 b-axis 360 ° tool taper SK 45 tool change unit 40 diameter of worktool holder bores 125 ( 175) mm spindle turning speed range 16 - 6000 U/min feed range 1 - 4000 mm/min rapid traverse 15 m/min size of pallet 500 x 630 mm numbers of pallets 2 chip conveyor Benr2223o3 weight of the machine ca. 12,5 t dimensions of the machine ca. 8300 x 5900 x 3000 m Inclusive: chip conveyor internal coolant supply approx. 20 tool...
Call
Oelde, Germany Germany
(dealership location)
2004
used
x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle ( 20 - 12.000 ) min/-1 power capacity - main spindel 28 / 19 kW max. Torque 125 Nm tool taper SK 40 swivellable feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm P98ll number of T-...
DECKEL-MAHO DMC 60 H DECKEL-MAHO DMC 60 H DECKEL-MAHO DMC 60 H DECKEL-MAHO DMC 60 H DECKEL-MAHO DMC 60 H
more images
5
Call
Metzingen, Germany Germany
(dealership location)
1995
used
x-travel 600 mm y-travel 560 mm z-travel 560 mm Control SIEMENS 840 C Bdxqawbdwo total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m
DECKEL S1 DECKEL S1 DECKEL S1 DECKEL S1 DECKEL S1 DECKEL S1
more images
6
Call
Hessisch Lichtenau Germany
1965
used
Univ. tool grinding machine DECKEL type S1 3cnpttg machine No. 66199 Year of construction approx. 1965 grinding wheel speed 3750 - 7500 rpm. longitudinal displacement of the table slide down 260 mm transverse displacement of the table slide bottom 50 mm Longitudinal displacement of the table slide top 100 mm Vertical stroke of upper table slide approx. 45 mm Motor power 0,4 / 0,55 kW Mains connection 380 Volt, 50 Hz - Tool holder in the dividing head SK 40 - S20 x 2 - Vertical adjustment with up...
DMU Deckel Maho Fräsmaschine DMU 50 DMU Deckel Maho Fräsmaschine DMU 50 DMU Deckel Maho Fräsmaschine DMU 50 DMU Deckel Maho Fräsmaschine DMU 50
more images
4
Call
Oftersheim Germany
1999
used
CNC Milling Machine DMU 50M 3+2 Control Heidenhain TNC 310 Year of manufacture 1999 X 500 Y 400 Z 400 Qq3ln B and C axis adjustment by hand The offer is directed exclusively to traders in the sense of § 14 BGB (German Civil Code). No sale to private individuals!
Deckel FP3A Deckel FP3A Deckel FP3A Deckel FP3A Deckel FP3A
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
used
Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm Jnzsjm9v -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg
DMG Deckel Maho DMC 80 U DMG Deckel Maho DMC 80 U DMG Deckel Maho DMC 80 U DMG Deckel Maho DMC 80 U DMG Deckel Maho DMC 80 U DMG Deckel Maho DMC 80 U
more images
6
Call
Trittau, Germany Germany
(dealership location)
2001
used
x-travel 800 mm y-travel 700 mm z-travel 600 mm Control M i II Plus Danrdhdxk turning speed range - main spindle 12000 min/-1 Number of working hours 52200 h spindle hours 18450 h In our estimation, the machine is in good condition and can be viewed live by appointment. Accesories: - 2-fold pallet changer *** Changes and errors in the technical data and information as well Subject to prior sale!***
DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V DECKEL MAHO DMC 635 V
more images
10
Call
Oelde, Germany Germany
(dealership location)
2006
used
x-travel 635 mm y-travel 510 mm z-travel 460 mm control 840D ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 18,9 / 14 kW tool taper SK 40 DIN 69871 max. Torque 100 / 74 Nm tension force 8 kN work table: table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm Tool-...
DECKEL FP 4 AT DECKEL FP 4 AT DECKEL FP 4 AT DECKEL FP 4 AT DECKEL FP 4 AT DECKEL FP 4 AT DECKEL FP 4 AT
more images
7
Call
Ladis, Austria Austria
(dealership location)
used
x-travel 560 mm y-travel 500 mm z-travel 450 mm taper ISO SK-40 turning speeds 40-4000 U/min control DIALOG 3 tool change unit 20 Positionen total power requirement kW Tjnuowox weight of the machine ca. 3 t dimensions of the machine ca. 2600 x 2300 x 1600 mm
Deckel Maho DMU 80T Deckel Maho DMU 80T Deckel Maho DMU 80T
more images
3
Call
Langenfeld Rhld., Germany Germany
(dealership location)
2001
good (used)
CNC Control: HEIDENHAIN TNC426 Number of controlled axes: 5 X mm: 880 Y mm: 630 Z mm: 630 C mm: Continuous B mm: Ø700 Through spindle coolant bar. 40 Qdqib Speed Main spindle rpm 20 - 12.000 Tools : SK 40 Table load capacity Kg 800
DECKEL-MAHO DMC 75 V linear DECKEL-MAHO DMC 75 V linear DECKEL-MAHO DMC 75 V linear DECKEL-MAHO DMC 75 V linear
more images
4
Call
Metzingen, Germany Germany
(dealership location)
2005
used
x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size...
Deckel TNC 355 Deckel TNC 355 Deckel TNC 355 Deckel TNC 355 Deckel TNC 355
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
used
Control panel, control unit, control panel, control panel, control unit, keyboard, screen, control -Spare part comes: from a machining center cover type FP3A -Manufacturer: Lid -Type: TNC 355 Bhdycxrpj7 -Dimensions: 600/750/H475 mm -Weight: 32 kg
DECKEL FP 1 DECKEL FP 1 DECKEL FP 1 DECKEL FP 1 DECKEL FP 1 DECKEL FP 1
more images
6
Call
Hessisch Lichtenau Germany
1967
used
Univ. tool milling machine DECKEL type FP 1 machine No. 51265/08 Year of construction approx. 1967 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 2100 mm spindle admission SK 40 - S20 x 2 spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,6 kW pole changeable Mains connection 380 Volt, 50 Hz - feed in X- and Z-axis - Spindle speed via 2 motor speeds and 8 gear steps - Pinol shift at vertical milling head 60 mm - Fixed angular table - Adjacent control cabinet Space requirement L x W...
Call
Oelde, Germany Germany
(dealership location)
1996
used
x-travel 800 mm y-travel 650 mm z-travel 550 mm control TNC 426 PB Heidenhain Main spindle: turning speed range - main spindle max. 6.300 min/-1 power capacity - main spindel 13 / 11 kW max. Torque 524 / 356 Nm Iekcm8j tool taper SK 40 NC-Rotary table: table surface area 900 x 614 mm max. table load ca. 350 kg number of T-slots 9 T-slot - width 14 H7 mm T-slot - distance 63 mm rotatable C: 0,001 ° Tool-Presetter: number of toolpositions 25 pos. max. tool diameter 80 mm max. tool-dia wit...
Call
Bühl, Germany Germany
(dealership location)
2002
used
x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm workpiece length 315 mm weight of tools max. 8 kg NC-rotary table - speed - max. 15 U/min table load 600 / 500 kg total power requirement ...
Call
Niederdorf Switzerland
1991
good (used)
Universal milling machine Deckel FP 4 process paths X/Y/Z 500 / 400 / 400 mm table clamping surface 800 x 460 mm feed rate 8 - 630 mm/min Mounting SK 40 speed range 18 x 50 - 2500 rpm Jwrzd7fb feed range 18 x 8 - 630 mm/min rapid traverse 1300 mm/min table load 400 kg quill stroke 90 mm Total power requirement 7.50 kW Available immediately
Deckel Maho DMU50T Deckel Maho DMU50T Deckel Maho DMU50T Deckel Maho DMU50T Deckel Maho DMU50T Deckel Maho DMU50T
more images
6
Call
Székesfehérvár Hungary
2002
excellent (used)
Controller Heidenhain TNC530 No of axes 3 + 2 (3 x nc and 2 x manual) Table size 630 x 500 mm Table load max. 200 kgs X travel 510 mm Y travel 410 mm Hjsj2gh Z travel 410 mm B tilting -5°/+110° C swiveling 360° Spindle speed 8000 rpm ATC Magazin 16-fold Tool type SK40 Spindle power 13 kW Weight of the machine 3000 kgs Dimensions L x W x H = 2100 x 1520 x 2140 mm Accessories - Coolant unit - Working lamp - Portal MPG - Built-in 2 axis turning table - HEIDENHAIN probe
Deckel HR 250 5000 Deckel HR 250 5000 Deckel HR 250 5000 Deckel HR 250 5000 Deckel HR 250 5000
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
used
Hand-held control unit, handwheel, push button, step switch, keypad, axis control, electronic handwheel, control unit -Spare part comes: from a machining center cover type FP3A -electronic: handwheel -Type: HR 250 5000 Bhdydbcu78 -Dimensions: 100/130/H110 mm -Weight: 1.2 kg
DECKEL FP 3 A DECKEL FP 3 A DECKEL FP 3 A DECKEL FP 3 A DECKEL FP 3 A DECKEL FP 3 A
more images
6
Call
Hessisch Lichtenau Germany
1980
used
CNC milling machine DECKEL type FP 3 A make no. 2206 - 0325 year of construction 1980 CNC path control GRUNDIG CNC 2101 travel X: 490 mm, Y: 300 mm, Z: 340 mm table size 705 x 425 mm spindle support SK 40 B3vdqpt Pinol stroke 100 mm spindle speed 25 - 2500 rpm. 21 steps feed speed 5 - 500 mm/min. infinitely variable rapid traverse speed 1200 mm/min. Motor power spindle drive 2 / 4 kW pole-changing Mains connection 380 Volt, 50 Hz - CNC-axis control GRUNDIG CNC 2101 - mechanical handwheels for al...
DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T
more images
10
Call
Oelde Germany
2000
used
x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426 Heidenhain Main spindle: turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper SK 40 swiveling-rotary-table: Cnrhzdhf table diameter 700 x 500 mm swivellable B: 105° (-10°/+95) ° rotatable C: 360 ° max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H6 mm Tool-Presetter: number of toolpositions 16 pos....
Call
Monheim am Rhein Germany
2004
good (used)
The machine went into production in September 2009. Operating hours (date 23rd. June 2022): - Switch-on hours: 15,952 h - Total spindle hours: 4,523 h - New motor spindle November 2018 (since then run 1,687 h). * CNC control SIEMENS Sinumerik 810 D powerline * 30-station ATC * Production package 1: - Coolant system with paper band filter - Coolant through spindle 40 bar - chip conveyor - Visiport Cddw2kkafb Without tool holders. x-travel 640 mm y-travel 600 mm z-travel 500 mm table surface ...
FEINMECHANIK MICHAEL DECKEL SOE FEINMECHANIK MICHAEL DECKEL SOE FEINMECHANIK MICHAEL DECKEL SOE FEINMECHANIK MICHAEL DECKEL SOE
more images
4
Call
Bühl, Germany Germany
(dealership location)
1978
used
clamping diameter max. 17,5 mm grinding spindle speed 4500 U/min relief angle max. 45 ° total power requirement 0,55 kW B9xxon9ewu weight of the machine ca. 120 kg dimensions of machine L x W x H 0,54 x 0,47 x 1,31 m
Deckel Fuer FP 1 Deckel Fuer FP 1 Deckel Fuer FP 1 Deckel Fuer FP 1 Deckel Fuer FP 1 Deckel Fuer FP 1 Deckel Fuer FP 1
more images
7
Call
Bünde Germany
used
power capacity - kW tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. Bedb2bsd FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 2500 m².
Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4 Deckel Maho DMC 70 H RS 4
more images
15
Call
Werlte Germany
2006
excellent (used)
Horizontal machining center with 6-fold pallet station Manufacturer : Deckel Maho Type : DMC 70 H RS 4 6 pallets Control : SIEMENS 840D Shopmill Switch-on hours : 109000 h Spindle hours : 65000 h ( new spindle in 2020 ) Year of construction : 2006 Dsazrqgzk Availability : ex stock Werlte Technical condition : very good Machine has only run in aluminum Photo + Video Technical data X-axis : 700 mm Y axis : 800 mm Z-axis : 800 mm Max. Table load : 800 Kg max. spindle power : 30 kW max. spindle...
Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T Deckel Maho  DMU 60 T
more images
13
Call
Dieburg Germany
2000
excellent (used)
Cover/Maho DMU 60T Year of manufacture 2000 Operating hours 65925 h Spindle running time 23629 h Control 3-D path control TNC 430 Heidenhain Description Rigid table 1.000 x 610mm X-axis : 630mm Y-axis : 560mm Z-axis : 560mm Cdcwh8fptu Manual swivel milling head with adjustment aid Infrared probe TS 631 Tool measuring in working area TT 130 electr. handwheel High Speed Module Ethernet TNC 430 PA Machine in operation no series machining only used in toolmaking 20% steel- 80% aluminum machining ...
DECKEL MAHO DMU 80 T DECKEL MAHO DMU 80 T DECKEL MAHO DMU 80 T DECKEL MAHO DMU 80 T DECKEL MAHO DMU 80 T DECKEL MAHO DMU 80 T DECKEL MAHO DMU 80 T
more images
7
Call
Oelde Germany
2005
used
x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: 103° work table: table surface area 1.250 x 700 mm rotary table dia. 700 mm rotatable C: 360 ° max. table load ca. 500 kg T-slots 11x 14mm x 63mm tool magazin: number of toolpositions 32 (2x 16) pos. tool taper HSK-A63 max. tool diameter 80 / 130 mm m...
DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear DECKEL- MAHO DMG DMC 75V linear
more images
10
Call
Monheim am Rhein Germany
2006
good (used)
5-axis universal machining center with swivel spindle and rotary table. The spindle was replaced in November 2017. The machine has never seen heavy cutting and runs exclusively for aluminum and ureol production. Equipment: 3D CNC control Heidenhain iTNC 530 with SMART NC Linear drives Temperature compensation in the Z-axis Active cooling unit for the drives, control cabinet and motor spindle Direct measuring system 30-pos tool changer (plate) Bed flush Tool laser measurement BLUM (tool length...
DECKEL-MAHO DMU 50 eVolution DECKEL-MAHO DMU 50 eVolution DECKEL-MAHO DMU 50 eVolution DECKEL-MAHO DMU 50 eVolution DECKEL-MAHO DMU 50 eVolution DECKEL-MAHO DMU 50 eVolution DECKEL-MAHO DMU 50 eVolution
more images
7
Call
Bühl, Germany Germany
(dealership location)
2000
used
x-travel 500 mm y-travel 420 mm B92sgcxfop z-travel 380 mm table surface area 800 x 480 mm spindle taper HSK-A 63 DIN 69893 spindle turning speed - stepless 20 - 18.000 U/min feeds -stepless- bis / up to 20.000 mm/min rapid traverse 50 m/min table load 500 kg ATC 32 Pos tool length - max. 280 mm weight of tools max. 6 kg control HEIDENHAIN TNC 430 total power requirement 40 kW weight of the machine ca. 6 t dimensions of machine L x W x H 3,36 x 2,28 x 2,49 m Accessories: electron. hand whee...
Deckel Maho DMU 80 P hi dyn Deckel Maho DMU 80 P hi dyn Deckel Maho DMU 80 P hi dyn
more images
3
Call
Sonnenbühl Germany
2004
excellent (used)
Control Heidenhain TNC 530 x-way 800 mm y-way 700 mm z-travel 600 mm main spindle: Speed range - main spindle 20 - 21000 min/-1 Drive power - main spindle 16 / 13 kW Max. torque 475 Nm Tool holder HSK 63 NC swivel rotary table: table clamping surface Ø 630 mm max. table load 600 kg rotatable C: 0,001 ° Cdcsb0ul7s swiveling B: +30° / -45 ° max. workpiece diameter 800 mm max. workpiece height approx. 600 mm tool magazine: number of tool places 60 pcs. feed speed 1 - 60.000 mm/min rapid traverse 60...
DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2) DECKEL MAHO DMU 50 eco (3+2)
more images
11
Call
Schwäbisch Gmünd Germany
2014
excellent (used)
5 axes CNC universal machining center DMG DMU 50 eco (3+2) Cdhdt78j8a Control SIEMENS 810D Shopmill Year of manufacture 2014 Travels: X 500 mm Y 450 mm Z 400 mm B -5/+110° C 360° spindle speed - 8.000 rpm. CNC - swivel rotary table 630 mm x 500 mm tool changer 16 pockets SK 40 length x width x height 4325,0 × 2815,0 × 2450,0 weight 4100 kg Coolant system Chip conveyor Status light Measuring probe Documentation
DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T DECKEL MAHO DMU 50T
more images
9
Call
Kaiserslautern, Germany Germany
(dealership location)
2002
ready for operation (used)
General Data Measurements width 2100 mm Measurements depth 1520 mm Measurements height 2140 mm Machine weight 3000 kg Main Drive Spindle speed range 8000 Number of axis 5 Movement X-Axis Movement 510 mm Y-Axis Movement 410 mm Z-Axis Movement 410 mm This Deckel Maho DMU 50T Vertical Machining center was manufactured in the year 2002 in Germany and has 900 production hours. It has 5 axis. The machine has a spindle speed of 8000 rpm, is in very good condition and well maintained. Application Ty...
DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC DECKEL FP 3 NC
more images
9
Call
Malsch Germany
used
x-travel 400 mm y-travel 400 mm z-travel 400 mm Control Dialog 3 quill stroke 80 mm Cyorhfmpw spindle turning speed - stepless 0 - 3150 U/min total power requirement kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,8 x 1,4 x 1,9 m
Call
Karlsbad Germany
2002
used
x-travel:1800 mm y-travel:2000 mm z-travel:1100 mm pallet table size:1.600 x 1.400 mm table load capacity:3000 kg tool taper:HSK 100 spindle drive:44/32 kW turning speed range - stepless:10.000 1/min numbers of positions in the tool changer:180 control:iTNC 530 HEIDENHAIN total connected load:86 kVA transport dimensions LxWxH:6,1 x 3,4 x 3,8 m weight of the machine ca.:37 t 5-axis CNC universal maching center, simultaneously, NC-rotary table with pallet-device (1.600 x 1.400mm), linear palle...
DECKEL FP 4 A DECKEL FP 4 A DECKEL FP 4 A DECKEL FP 4 A DECKEL FP 4 A DECKEL FP 4 A
more images
6
Call
Bühl, Germany Germany
(dealership location)
1985
used
x-travel 485 mm y-travel 385 mm z-travel 380 mm table