Bed milling machine

Correa NORMA 45

Condition: like new (used), Year of construction: 2004, Retrofitted: 2023/2024 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mm Number of T slots: 11 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 3000 mm Z axis traverse: 1000 mm Distance between columns: 2530 mm Milling head Universal manual UM40 Dpqzuh Tool clamping system: Hydraulic Taper nose: ISO50 Speed range: 20 - 3.000 rpm (5.000 rpm direct exit) Spindle power: 30 kW Feedrates Feedrate: 7000 mm/min Rapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 Kg Machine weight approximate: 45300 Kg Machine dimensions approximate: 10926 x 4768 x 5110 mm Accesories Guarding External coolant.  Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical parts Sale price (Ex Work): On request View all technical features

Condition: good (used), Year of construction: 1988, In good technical condition. Year of construction 1988. X-axis - 3800 mm Y-axis - 950 mm Cqiepk8Azg Z-axis - 600 mm Max. revolutions 2000/min The Heidenhain system

Year of construction: 1994, Condition: good (used), Manufacturer: Boge Tip: V LEX 45 Engine: 45 kW Capacity: 6.5 m3 / min Qatlr

Condition: used, Fröling T4 45-150 kW woodchip boiler With dispensing system on request. Cx0Yf8T9

Condition: excellent (used), Year of construction: 2021, For sale used compressor Dqnju7 RENNER COMPRESSOR RSF-PRO 45 Year 2021 45KW 15Bar

Condition: excellent (used), CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs Dflla2Pxj - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition Net price: PLN 76900 Net price: EUR 17477 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: like new (used), Year of construction: 2006, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 900 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Beixo7Y Z axis traverse: 1000 mm Milling head Head type: Universal Auto-indexing UDG (2.5º) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872 Speed range: 20 - 3000 rpm Spindle power: 22 kW Feedrates Rapid feedrate (X / Y-Z): 20000 mm/min   /   12000 mm/min Weight and dimensions Maximum weight on table: 4000 kg Machine weight approx.: 14500 kg Machine dimensions approx.: 7367 x 5070 x 2803 mm Accesories Perimetral guarding Automatic tool changer: ATC30 Chip conveyor: rear longitudinal External coolant & high pressure coolant through spindle Electronic handwheel: HR-420 Sales conditions Warranty: 6 months mechanical parts Sale price (Ex Work): On request View all technical features

Year of construction: 2024, Condition: new, Contact Us 24/7 for mobile concrete batching plants for sale. The mobile and compact concrete batching plant represents the pinnacle of innovation, offering maximum mobility with minimal investment. Unlike traditional mobile concrete plants, the MOBICOM 45 has the unique feature of being transportable entirely within a single 40 ft. container. This unique attribute greatly simplifies logistics, allowing the entire facility to be transported by just one truck without requiring extensive site preparation or a mobile crane. The plant maintains the same configuration during both production and transport, ensuring a seamless transition and allowing you to continue operations without interruption. The MOBICOM 45 is not limited to easy transportation alone. Its design ensures that operational efficiency is never compromised. Since the mixer is positioned close to the ground, the produced concrete is directly transferred to the transit mixer via a conveyor belt; this accelerates the flow from production to application, enhances efficiency, and reduces labor requirements. The technical specifications of the MOBICOM 45 include a production capacity of 45 m³/h and a compact area requirement of just 200 m², making it an ideal solution when space and efficiency are critical. The plant’s total motor power of 55 kW and the required generator capacity of 80 kVA provide robust performance in various environments. With different mixer options such as Pan, Single Shaft, and Planetary, the MOBICOM 45 offers the flexibility to meet various project requirements. Additionally, the MOBICOM 45 is designed with sustainability and cost-effectiveness in mind, offering cement silo capacities ranging from 50 to 200 tons to suit various project scales and durations. Technical Specifications of the Small mobile concrete mixing plant 45 m³ General Features Dpqqzd Ctl7Bvslwo Csqduos83A Production Capacity: 45 m³/h Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 9.5 tons Total Motor Power: 55 kW Required Electrical Generator: 80 kVA Mixer Options: Pan - Single Shaft - Planetary Required Area for Operation: 200 m² Technical Specifications Aggregate Stock Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 1 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.75 m³ Cement Weighing Bunker: 450 kg Water Weighing Bunker: 300 liters Additive Weighing Bunker: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo: Capacity options ranging from 50 to 200 tons Control Type: FULLY AUTOMATIC

Condition: used, x-travel: 900y-travel: 250z-travel: 475speed range: 40-1800feeder: jatool holder: ISA 40weight approx.: 2400 Cfi2Gok7Io

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 80V 5PZS 700AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Test date 2024 Dimensions: 1,028 x 855 x 784 mm Weight: approx. 1,860 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 High-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30 /600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30 /600 S-336-00 Linde E30 H -387 -00/ High Linde E30P - 325-00 Linde E30 SH -1276-00 Linde E35/600H - 388-00 Linde E35 H-/HL - 387-00 Linde E35 P - 337-00 Linde E35 RHL - 387-00 Linde E35 SH-1276-00 Linde E40 - 337-00 Linde E40 C - 388-00 Linde E40 P - 337-00 Linde E45 / 600H - 388-00 Linde K 12/15-148-00 Linde P250 - 127-00 Linde P250L -127-05 Jungheinrich EFG 430 Toyota 7FBMF30/35 Toyota 8FBMT25 Crown TSP 6000-C Crown TSP 7000 Caterpillar EP30K/FB35KPAC Daewoo B30-35X Daewoo B35X-7 Caporbsgm Hyundai 50B-9 Mitsubishi FB25N UniCarriers QX 2-30 and others. All common battery sizes available, please enquire.

Condition: good (used), We offer here a used rear wall grille for sale. 0Mymypfr Included in delivery are: 01x back wall grille, used material color: sendzimir galvanized total width: approx. 2.200 mm total height: approx. 2.000 mm mesh size: approx. 95 x 45 mm Frame profile dim. Width: 30 x 30 mm Frame profile dim. Height: 25 x 20 mm Wire thickness: approx. 1.25 - 1.50 mm General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Brp7Gbcd9Uc Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mm Number of T slots: 11 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 3000 mm Z axis traverse: 1000 mm Vertical capacity (VC): -10 / 990 mm Distance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º) Tool clamping system: Hydraulic Taper nose: ISO50 Speed range: 6000 rpm Spindle power: 30 kW Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 Kg Machine weight approximate: 45300 Kg Machine dimensions approximate: 10975 x 4768 x 5095 mm Accesories Guarding Automatic tool changer: ATC30 Coolant: External & internal high pressure through spindle Electronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare parts Sale price (Ex Work): On request View all technical features Cvw7Cij9Ly

Condition: excellent (used), Year of construction: 2012, x-travel 6800 mm y-travel 3400 mm z-travel 2000 mm Control HH iTNC 530 table dimension - longitudinal 6000 mm table dimension - cross 2500 mm table load 10 t tool change unit 80 Pos. dist. between columns - front to rear 4700 mm total power requirement kW weight of the machine ca. 80 t dimensions of the machine ca. 12 x 11 x 7 m This portal milling machine is in good condition and can be inspected by Bcye7Qa7 arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Patented double Hirth serration with a pitch of 0.02 degrees --> Pitch of both swivelling axes 0.02 ° --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> simultaneous !! --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

Condition: like new (used), Year of construction: 2004, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 800 mm, rotational speed (min.): 18,000 rpm, NICOLAS CORREA BRIDGE MILLING MACHINE (PERFECT CONDITION) TECHNICAL FEATURES Make: Nicolas Correa Model: Euro 2000 Year: 2004 CNC: Heidenhain iTNC 530 Bik9Aegj Travel X: 2000 mm Travel: Y: 1250 mm Z travel: 800 mm Spindle: HSK 63 / 18,000 Rpm Tool change 24 positions Internal cooling PRICE AND MORE INFORMATION ON REQUEST

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 80V 5PZS 775AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Year of delivery 2024 Dimensions: 1,025 x 852 x 784 mm Weight: approx. 1,871 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 High-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30 /600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30 /600 S-336-00 Linde E30 H -387 -00/ High Linde E30P - 325-00 Linde E30 SH -1276-00 Linde E35/600H - 388-00 Linde E35 H-/HL - 387-00 Linde E35 P - 337-00 Linde E35 RHL - 387-00 Linde E35 SH-1276-00 Linde E40 - 337-00 Linde E40 C - 388-00 Linde E40 P - 337-00 Linde E45 /C/ 600H - 388-00 Linde K 5231-00 /side Linde P250 - 127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Crown TSP 6000-C/-D Crown TSP 7000 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Dptht2 Nissan QX30 Capricorn Boss PE30D TCM FHB25-E1L Yale ERP 30VL and others. All common battery sizes available, please enquire.

Condition: refurbished (used), Year of construction: 2005, BRAND: NICOLAS CORREA MODEL : DIANA 20 DIGITAL CONTROL: Heidenhain TNC 530 YEAR OF MANUFACTURE : 2005 YEAR OF REVISION : 2024 TABLE DIMENSIONS: 2,000 x 900 mm X AXIS: 2,000 mm Y AXIS: 1,000 mm Z AXIS: 1,000 mm HEAD TYPE: U22 (New) SPEED RANGE: 550 - 4000 Ul2Rujmsvx SPINDLE TYPE : ISO 50 FAST FEEDS: 20,000 mm / min APPROX. MACHINE WEIGHT: 14,000 kg MAX. ADMITTED ON TABLE : 3500 kg MACHINE DIMENSIONS : 6400 x 3500 x 2530

Condition: used, A line for producing water packaged into PET bottles in 0.5 L and 1.5 L formats. Line capacity: about 15,000 bph The line includes the following machines: 1) KHS filling triblock 45-80-10 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washing, Innoclean FR-EM 45 - KHS filling machine, Innofill EV 80 Gwjz2Sxxd - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeling machine - 2000 (16,000 bph), control: S7-300 3) PET bottle blowing machine - SIDEL SBO 16 - 1998 (16,000 bph). 4) Packing machine in packs with tunnel - ZVT PSP 032 S, 1998 (21,000 bph 1.5 L / 43,000 bph 0.5 L) 5) LANFRANCHI air conveyors with control cabinet (transport of PET bottles from SIDEL to KHS) 6) a set of KHS Innoline plate conveyors - several tens of running meters, turns, distributors Machines used, continuously serviced, to be serviced before restarting. Currently disassembled and assembled in containers, prepared for transport. The line is prepared for reassembly - each component of the line is described with a unique number. Full and original technical documentation.

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mm Maximum weight on table: 25000 kg Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Vertical capacity (VC): 450 / 1450 mm Distance between columns: 2700 mm Ch7Iibl0Hs Milling head Auto-indexing differential head (UAD - 0,1º) Tool clamping system: Hydraulic Taper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872 Speed range: 6000 rpm Spindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 56000 Kg Machine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors with a perimetral wire-mesh fence Automatic tool changer: Optional Chip conveyor: 1 transversal hinge type Electronic handwheel: New HR-520 Coolant: External & internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare parts Sale price (Ex Work): On request View all technical features

Condition: ready for operation (used), Year of construction: 1988, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, heidenhain 3-axis screwdriver feed drive Sfvfqaronn table 3500X700MM strokes 3100X1000X1000MM weight 12000KGS spindle 2000 turns sa 50 15KW

Condition: excellent (used), Voltage 3 x 230 / 400, 45 A Bsbiqtf8Ao3 6 sections The appliance has been tested and is fully functional!

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK63 x 3 - Spindle power : 35 [kW] Bsamvkltot0 - Spindle speeds : 18000 [rpm] - Electrospindle - Travels on X/Y/Z axes : 9600/1605/710 [mm] - Rapid traverses rates (X/Y/Z) : 30/30/20 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 15 x 3 TABLE - Table dimensions : 10000 x 3000 [mm] - Distance table / spindle nose (min./max.) : 750 [mm] POWER SUPPLY - Total installed power : 212 [kW] - Machine weight : 50 000 [kg] EQUIPMENT - CNC : Siemens 840 - Interface : RS232 - Linear scales - Coolant tank - Chips conveyor - Distance between spindles : 900 [mm] - Distance between mounts : 4470 [mm]

Condition: repair required (used), Cambio 45 outfeed rollers IDL000817 Bzdm9Wdf

Condition: like new (used), Year of construction: 1997, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC426 Technical features Dimensions Table dimensions: 2000 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Dpqzvp Traverses of axis X axis traverse: 2000 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal manual (U22) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872 Speed range: 20 - 4000 rpm Spindle power: 22 kW Feedrates Feedrate: 5000 mm/min Rapid feedrate: 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kg Machine weight approx.: 9000 kg Machine dimensions approx.: 5265 x 3250 x 2760 mm Accesories External coolant Automatic tool changer: ATC-30 Electronic handwheel: HR-130 Guarding Sales conditions Warranty: 6 months mechanical parts Sale price (Ex Work): On request View all technical features

Condition: like new (used), Year of construction: 2008, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Z axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872 Speed range: 3000 rpm Spindle power: 22 kW Feedrates Feedrates: 5000 mm/min Dqjvv9 Rapid feedrates (X-Y-Z): 20000 mm/min Weight and dimensions Maximum weight on table: 6000 kg Machine weight approx.: 20000 kg Machine dimensions approx.: 7750 x 4400 x 3100 mm Accesories Guarding New automatic tool changer: ATC-30 Longitudinal rear chip conveyor Electronic handwheel: HR-410 External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical parts Sale price (Ex Work): On request View all technical features