3D-CNC ROUTER MACHINE

CNC-STEP High-Z S-400

Specifications / Technical Data S-400
Cfpzdm
CNC Router / CNC milling machine / Engraver

cnc-step.com/cnc-router/

With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).

Or if you simply want to do engraving- or drillingjobs…..you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth.

All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller.

A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.

Basic equipment of all High-Z CNC-milling and engraving machines:

Software ConstruCAM-3D ( from S-720 and S-400/T ) included !!


Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!


-----

Equipment / Productdetails:

•Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step)
•2 motors for constant tension and compression during milling operation on X-Axis
•Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
•Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
•Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
•Traverse speed of rapid feed: max. 3000 mm/min
•Technical resolution: 0,00187 mm ( 1/8 Schritt )
•Reversal error max.: +/- 30µm ( 0,03mm )
•Table size / clamping area: 730 x 400 mm
•Traverse Paths: X=400 mm; Y=300 mm; Z= 110 mm
•Reference- and limit switch on all axes
•Double safety emergency stop button
•Energy chain for clean cabling
•Total dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm
•Milling Motor anchorage: Euroneck Ø43mm
•incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional)
•Modular frame for universal application
•Weight appr. 31 kg
•Complete machine Included 5 driver microstep controller 5x 3,5 Ampere (Zero3)
•An approx. 30-minute long introduction during pick up and an unlimted telephone support are included.
•An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.