3D CNC MILLING MACHINE
CNC-STEP
High-Z S-400/T
MACHINE DATA
- Machine type:
- 3D CNC MILLING MACHINE
- Manufacturer:
- CNC-STEP
- Model:
- High-Z S-400/T
- Condition:
- new
PRICE AND LOCATION
LISTING DETAILS
- Listing ID:
- A868-907
- Update:
- 22.01.2022
DESCRIPTION
CNC-Portal-Router / CNC-Engraving machine
Zjhpdyxl
With the purchase of the T-variation of High-Z cnc-router you get a proven technology. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible.
With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min.
Here's a video on a unloaded drive with the new High-Z / T.
This 3D-milling-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines.
All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller.
A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
Basic equipment of all High-Z CNC-milling machines:
Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !!
To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward
Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!
-----
Equipment / Productdetails:
•Drive : 4 stepping motor by Nanotec with 2000 steps/rev (1/10 Step)
•2 motors for constant tension and compression during milling operation on X-Axis
•Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
•Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
•Ball bearings at both sides of ball screws on X and Y axis
•Traverse speed of rapid feed: max. 7000 mm/min
•Technical resolution : 0,00625 mm ( 1/8 Schritt )
•Reversal error max.: +/- 10µm ( 0,01mm )
•Table size / clamping area: 730 x 400 mm
•Traverse Paths: X=400 mm; Y=280 mm; Z= 110 mm
•Reference- and limit switch on all axes
•Double safety emergency stop button
•Energy chain for clean cabling
•Total dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm
•Milling Motor anchorage: Euroneck Ø43mm
•incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional)
•incl. Software ConstruCAM-3D limited ( recommended sell price 1902.81 EUR)
•Modular frame for universal application
•Weight appr. 31 kg
•Complete machine Included 5 driver microstep controller 5 x 3,5 Amps (Zero3)
•An approx. 30-minute long introduction during pick up and an unlimted telephone support are included.
•An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.
-----
Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine:
• 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology
• Main voltage 115 - 240 Volt / 47 - 63 Hz.
• Motor current 4 x 3,5 Amper
SELLER
CNC-STEP GmbH & Co. KG
Contact person: Herr Frank Hylewicz
Siemensstraße 13-15
47608 Geldern, Germany

Mit global verteilten Wiederverkäufern und einem stark kundenorientierten Support hat sich CNC-STEP einen sehr guten Ruf im Bezug auf hohe Qualität und starken Service auf dem globalen Markt erwirtschaftet.
Vielfältige Anwendungsbereiche und ein smartes Zubehörprogramm machen unsere CNC Maschinen im Industriebereich, Gewerbe, als auch im Hobbybereich so stark begehrt.
Durch den kontinuierlichen Kundenkontakt können wir konstant neue Ideen und Veränderungen an unseren Maschinen umsetzen und somit unsere Produkte stetig verbessern.
Lassen Sie sich heute noch unverbindlich beraten und vereinbaren Sie einen Vorführtermin in unserem Haus, um sich persönlich von unserem Sortiment und der Kompetenz der CNC-STEP GmbH & Co.KG ® zu überzeugen.
Wir freuen uns auf Ihre Rückmeldung.
Grüße aus Geldern
Frank Hylewicz und das gesamte Team von CNC-STEP
CNC Maschinenbau / Hersteller
Siemensstraße 13-15
47608 Geldern
Deutschland ( Linker Niederrhein / Nähe Ruhrgebiet )
USt-ID-Nr.: DE815781260
Inhaltlich Verantwortlicher gemäß § 55 RStV:
Frank Hylewicz
Siemensstraße 13-15
47608 Geldern
Betriebshaftpflichtversicherung
Basler
Basler Strasse 4
61352 Bad Homburg
Räumlicher Geltungsbereich der Betriebshaftpflichtversicherung: EU
Rechtliche Hinweise zur Webseite
Alle Texte, Bilder und weiter hier veröffentlichten Informationen unterliegen dem Urheberrecht des Anbieters, soweit nicht Urheberrechte Dritter bestehen.
Send inquiry
TELEPHONE & FAX
































