Bench Drilling Machine

BERNARDO DMT 32

Condition: new, Column drill Bernardo BM 32 SB Drilling capacity max. 32 mmChuck:1 - 16 mm / B 18Morse cone: MK 4Spindle speed: (12) 150 - 2450 rpm Projection: 255 mmDrilling table swiveling: 360°Spindle / table distance max. 750 mmDistance spindle / base plate: 1210 mmPin sleeve stroke: 120 mmPillar diameter: 92 mmTable size / T-slot size: 385 x 335 mm / 14 mmWorking surface base plate: 380 x 335 mmMotor output power: S1 100.1 kW / 400 VMotor input power: S6 40.6 kW / 400 VMachine dimensions: (W x D x H)450 x 800 x 1730 mm Bgc9Gdl0G

Condition: new, bore capacity in steel (diameter) 32,0 mm arm length 310 - 820 mm workpiece height max. 370 - 870 mm turning speeds 75 - 1220 U/min spindle taper MT 4 MK base plate 825 x 690 mm threading 24 M quill stroke 250 mm quill feed 0,1/0,16/0,25 mm/U travel x / y 500 / 510 mm total power requirement 2,25 kW weight of the machine ca. 1200 kg. range L-W-H 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor Ciqp0Zgfvh - hydraulic motor - operating tool - Height-adjustable protective cover

Year of construction: 2021, Condition: new, Bernardo Gear-driven pillar drilling machine GB 32 STi Technical specifications drilling capacity in steel 32 mm Drilling capacity in cast iron 35 mm Thread cutting max. M20 drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / number of steps 125 - 3030 rpm / 12 feed range 0,1 / 0,2 / 0,3 mm/rev throat 325 mm distance spindle / table max. 690 mm distance spindle / base plate 1250 mm spindle sleeve stroke 160 mm Column diameter 120 mm table size / T-slot size 500 x 420 mm / 14 mm Working surface base plate 365 x 370 mm Motor output power S1 100% 1.0 / 1.2 kW Motor input power S6 40% 1.5 / 1.8 kW Machine dimensions (W x D x H) 570 x 900 x 2200 Weight approx. 415 kg Scope of delivery - Gear rim drill chuck 1 - 13 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2 - Coolant device - Electromagnetic spindle feed Pkx8T - Tapping device - Automatic tool ejector - LED machine light - Digital speed display - Height adjustable protective cover - Initial filling with Shell Tellus 46

Condition: new, Bernardo bench drill DMT 20 Technical specifications Drilling capacity of Max 20 mm Thread cutting max. M16 Morsekonusv MK 2 Spindle speed (5) 320 – 1820 U/min Throat depth 240 mm Distance from spindle / table max 360 mm Distance from spindle / base plate 680 mm Quill stroke 135 mm Column diameter 85 mm Behwgm8Dnf Table size / T - slot size 252 x 252 mm / 14 mm Work surface of bottom plate 367 x 305 mm S1 motor power output 100% 1,1 kW / 400 V Motor power S6 40% 1,5 kW / 400 V Machine dimensions (W x D x H) 470 x 880 x 1270 mm Weight approx. 192 kg Properties Cover according to CE standard, adjustable on the drill bit length Surface-machined work table, adjustable height of rack and winch Ground base plate with T-slots for clamping high workpieces Adjustable drill depth stop for accurate delivery of the Quill Guaranteed accuracy ≤ 0.02 mm in the Quill measured Powerful drive motor even during continuous operation Robust and high-performance drills for heavy duty Including automatic reversing for tapping Scope of delivery Chuck 1-16 mm / B 18 Chuck Dorn MK 2 / B-18 Digital speed display Thread cutting device LED machine luminaires Height-adjustable guard

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm Bq0Htj0Ul9 height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: ready for operation (used), Year of construction: 2000, turning diameter 320 mm turning length 750 mm control HeidenhainManualPlus 3110 centre height 160 mm turning dia. over face-slide 150 mm turning dia. in gap 380 mm length of gap 220 mm spindle head DIN 55027 Drhgfx spindle bore 50 mm max. torque max. 950 Nm turning speed range V-konstant 1-4000 U/min turret (x-stations) 8 / VDI 30 Number of working hours 5850 h total power requirement 17 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 3,3 x 1,35 x 1,8 m Overall size 2,1 x 1,35 x 1,8 m switchgear cabinet 1,2 x 0,5 x 1,7 m Cycle lathe, DMT-Kern, with Heidenhain MANUALplus 3110 cycle control and Sauter 8-station turret. ONLY 5850 operating hours from a small mechanical workshop!

Condition: excellent (used), Year of construction: 2004, turning diameter over cross slide: 320 mm, spindle bore: 52 mm, turning length: 750 mm, turning diameter: 320 mm, turning diameter over bed slide: 150 mm, quill diameter: 60 mm, spindle speed (max.): 3,000 rpm, total length: 2,800 mm, total width: 1,880 mm, total height: 1,600 mm, overall weight: 2,200 kg, rotational speed (max.): 3,000 rpm, Cycle controlled machine Handwheel electronic in Z + X Axis Parat Tool holders system 3 chuck diameter.   For manual, cycle and CNC processing up to interactive contour programming Covered guidance tracks (DGP) for high long-term precision Direct drive from motor to main spindle for high running smoothness Oil recirculating lubrication unit with filtering for the lubrication of the precision main spindle bearing Combination control unit for economically advantageous programming and machine operation, as well as optimum access to the work area Turning diameter bed Ø: 320mm Turning diameter slide: 150mm Turning length: 750mm Spindle bore: 52mm spindle power: 16kW Quill: 60Ø Quill stroke: 140mm Spindle mount: 4Mk Speed: 3000Rpm Feed X-axis: 1000mm/min. Feed Z-axis: 2000mm/min. Length: 2800mm Width: 1880mm Bei0Dwi Height: 1600mm Weight: 2200kg

Condition: new, Year of construction: 2022, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 90 mm Scorer: yes Saw blade height adjustment: manual Pivot adjustment saw blade: manual Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Mxqopg Saw blade diameter: 315mm Speeds: 4000 / 6000 rpm Engine power: 5,5 kW Suction connection: 100 mm machine length: 3300mm Machine width: 2000mm Weight: 650kg

Condition: new, Bernardo frame saw Topcut 3200 ER Technical Specification Table dimension 1100 x 735 mm Format table 3200 x 400 mm Trimming length 3200 mm Max saw blade diameter 400 x 30 mm Max cutting height 90° / 45°125 / 88 mm Cutting width at the parallel stop 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Boom table with roll 1240 x 860 mm Speed Main saw blade 3000 / 4000 / 5000 rpm Speed scoring saw blade 8000 rpm Scribble saw blade 120 x 20 mm Suction connection of 100 mm Engine power S1 100% 5.5 kW (7.5 hp) Engine recording power S6 40% 7.5 KW (10.0 hp) Scoring motor power 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Delivery • Electric saw blade height adjustment • Digital cutting height display • Saw blade cover with inlet roller • Miter stop • Eccentric tensioner • Table widening • Extendable telescopic stop • Longitudinal stop flaps • Boom table with roller • Sliding stick • Scoring unit with independent motor Bkxuckx • Operating tool Properties • High-torque drive motor (5.5 kW) powerful drive motor, designed for optimum cutting performance • Smooth-running double roller trolley with center and end position locking for precise cuttings • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Boom table with roller for simplified handling of larger workpieces • Foldable parallel stop with mik

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0296-029 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm Dfngsdqj7 -Weight: 6.4 kg

Condition: good (used), Year of construction: 2012, turning diameter 320 mm turning length 750 mm control Heidenhain MANUALplus 620 Number of working hours 13000 h turning diameter over bed slide 150 mm Drdcuv cross movement 200 mm speeds V-konstant = 1-4000 U/min transmission ratio 2 spindle head Din 55022, Gr. 5 spindle bore 52 mm feeds cross mm/min. feed longitudinal - mm/min rapid travel - longitudinal/face 5/10 m/min thread pitch 0,01-999,9 mm power feed longitudinal 7000 N tailstock quill taper MT 4 tailstock - quill stroke 140 mm turret (x-stations) 8 x 30 mm total power requirement 16 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,7 x 1,9 x 1,6 m Very well-preserved cycle lathe, made by DMT-Kern/ Germany, from the prototype workshop, with cycle control Heidenhain MANUALplus 620 HCSI, with 8-way tool changer WITH 8 driven tool positions and separate C-axis with brake, is activated when drilling/turning threads, holes with a bolt circle (off-center) or in milling operation. Prism/flat bed guide hardened and ground, slide guideways covered, digital servo motors lengthways and plane, protective cover and sliding door, combination operating station with optimalaccess to the work area and can be moved over the entire length of the machine. Sold due to free funds for the purchase of a new machine, delivery at the beginning of May 2025. Machine dealer with own stock of 1600 m².

Condition: used, Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc. Sirsegtn

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller Cns7Azjr -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0314-028 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

Year of construction: 1997, Condition: used, CNC control, control panel, machining center Bqusp2T8Bu -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Monitor: Asus -Dimensions: 620/120/H370 mm -Weight: 50 kg

Year of construction: 1997, Condition: used, CNC control, control panel, machining center Hgrkfqtdzl -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Limit switch: Balluf BNS 519 -Dimensions: 500/500/H210 mm -Weight: 11.4 kg

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), first registration: 03/2025, overall weight: 3,225 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro6, total width: 2,275 mm, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 74852---- Subject to errors and prior sale! SPECIAL EQUIPMENT Bsdflcbi73A * Windows: Side windows, 2nd row, fixed, right and left including sliding door right and left * Heated rear window, fixed - Interior mirror - Partition with window * Radio: Ford audio system with 13 inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - 13 inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Limited-slip differential, mechanical * Auxiliary heating (fuel-water heating) with remote control including H7 AGM double battery * MTW conversion: RAUWERS PHOENIX SOLARIS special signal bar - electronic siren city/country - Control unit for the special signal system on the center console - Antenna for digital radio - Third beacon at the rear - Schnierle individual seats OTHER EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area (rear door flaps or rear swing door) * Airbag (passenger side) * Airbag driver side * Anti-lock braking system with electronic brake force distribution * Outside mirror housing in vehicle color * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. B. remaining range) and outside temperature display * Roof console * Double-wing rear door with 180° opening angle (without window) * ESP - hill start assist - safety brake assist - traction control * Electric front windows - with quick-up/down switch for driver and front passenger * Electronic parking brake * Ford Key Free system - including Ford Power start function * FordPass Connect - including live traffic information and WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Floor mats: rubber floor mats at the front * Grab handle, driver and front passenger side * Lockable glove compartment with lid * Interior lighting at the front with delay switch * Automatic air conditioning at the front - with recirculation heating - with R-1234yf coolant * Front headrests * 55 l fuel tank * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED indicators at the front - cornering light, static - high beam assistant * Cargo area lighting (LED) - extra bright * Cargo area floor: vinyl floor covering "Easy Clean" * Steering wheel, Sensico in leather look * Center console, small * Emergency call assistant eCall * Package: Technology package 2 (Limited) - Exterior mirrors with integrated indicators, electrically adjustable, heated and automatically foldable - Audio system 13?? Multifunction display and Ford SYNC - Pre-Collision Assist, camera-based - Fatigue warning - Traffic sign recognition system - Wrong-way driver warning function - Lane assist including lane keeping assist - Parking pilot system front/rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particle filter: Diesel particle filter * Radio accessories: 4 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Light alloy wheels 6.5 J x 16, 10-spoke design - with 215/65 R 16 tires * Windscreen wiper with rain sensor * Sliding door right * Mud flap rear * Mud flap front * High side paneling * Power steering * Seat belts - Seat belt tensioner and belt force limiter front - Warning system for driver's seat belt not fastened * Seats: Seat package 46 - driver's seat,

Condition: used, Year of construction: 2005, Used machine Year of manufacture 2005 Bernardo S 480 P wood band saw Dracn7 Cutting width 600 mm Cutting height 435 mm Saw blade length 4590 mm Cutting speed 1560 m/min Table dimensions 610 x 700 mm Table height 910 mm Saw table inclination 0 - 45° Extraction nozzle diameter 100 mm Motor power 4 kW Voltage 400 V Weight approx. 330 kg Sturdy wood band saw with large, swiveling gray cast iron saw table. The cutting height is adjusted using a handwheel and can be read precisely on a mm scale. For precise work, the saw blade run can be checked via a viewing window on the front. Cutting width: 465 mm Cutting height: 310 mm Saw blade length: 3640 mm Cutting speed: 439 / 939 m/min Table dimensions: 480 x 480 mm Table height: 950 mm Saw table inclination: -10° to +45° Extraction nozzle diameter: 2 x 100 mm Roller diameter: 480 mm Motor power: 1.5 kW (2.0 HP) Weight: approx. 145 kg Cutting height adjustment using a handwheel via a rack with a mm scale Torsion-free machine body guarantees smooth and precise running Die-cast aluminum flywheels with special rubber bandage for a long service life of the saw blades Large-dimensioned saw table made of gray cast iron, swivels from -10° to +45° Standard with two suction nozzles (100 mm) for optimal chip extraction Easily movable parallel stop made of aluminum with quick clamping system and integrated magnifying glass Standard with two speeds to adjust the cutting speed to the respective material Viewing window on the front to check the saw blade run Availability: short term Storage location: Flörsheim

Condition: new, sheet width 1270 mm plate thickness 2.0 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 465 kg dimensions of the machine ca. 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam Gy8Hrjboi - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270mm

Condition: new, Special offer price for stock items. Only while stocks last. Price ex stock, plus VAT. Drilling-milling machine Bernardo FM 50 HSV with digital display Underframe not included in delivery! Drilling capacity in steel: 32 mm drilling capacity in cast iron: 40 mm cutter head max.: 80 mm throat depth: 220 mm spindle speed: (12) 75 - 3200 rpm spindle adaptor: MK 4 quill stroke: 120 mm quill feed rate: (3) 0.10 / 0.18 / 0.26 mm/rev. table size: 800 x 240 mm travel (x / y): 555 / 225 mm milling head tiltable: -60° to +60° distance spindle / table: 95 - 485 mm height adjustment milling head: 390 mm T-slot size: 14 mm lifting motor: 90 W motor output power S1 100%: 1,1 / 1,5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 970 x 1460 mm Weight approx.: 322 kg Features: Hvddhvypc - Versatile applications such as: Slot milling, face milling, spindling, etc. - Standard with automatic spindle sleeve feed and thread cutting device - Comfortable height adjustment of the milling head by means of lifting motor - Digital display for the quill feed as standard - Dovetail guide for x-, y- and z-axis, adjustable via wedge bars - High running smoothness due to ground gear wheels running in oil bath - Milling head swivels to both sides for angle drilling, milling of chamfers, etc. - High stability due to dovetail guide of the gear head - Spindle sleeve adjustment by means of handle, fine adjustment by means of handwheel - Powerful 2-stage motor, speed range 75 - 3200 rpm - High safety due to height-adjustable chuck guard with microswitch Scope of delivery: - 3-axis digital display ES-12 V with LCD display - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - tightening spindle M 16 - Reducing bushing MK 4 / 3 - Combination arbor MK 4 / 27 mm - Height adjustable protective cover - Automatic quill feed - Lift motor for milling head - LED machine light - Digital quill stroke display - Thread cutting device - Blade protection cover - Longitudinal measuring scale - Operating tool Part number: 02-1096

Condition: used, machine/vehicle number: G-KF122377H, Circular saw milling machine Bernardo SF2300L, year of manufacture 2002, good condition, standard equipment, 4 kW, 315 mm blade diameter, 100 mm cutting height, 2300 mm format table length, approx. 650 kg Prices subject to change, errors, printing and typesetting errors reserved Bibk9Ph0Sk

Condition: new, Functionality: fully functional, - Universal countersinking tool - Company Heule, type Solo - used - functional, very good optical condition, technically perfect - little to hardly used, see photos 2U03Hfhm9 - Scope of delivery: 1 piece stock, type GH-B-0-0071 2 pieces of solo knife housing, one of which is installed, the other is new and OVP 4 knives, one of which is installed in the tool, the other three are new and OVP - including various drawings - Year of manufacture 2003 Shipping Germany-wide 8,90€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: new, sheet width 1020 mm plate thickness 2.5 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 340 kg dimensions of the machine ca. 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 |200 | 270 mm Cprh8Uyoz9

Condition: new, Functionality: fully functional, The following item is for sale: - Our offer number: 32/129 - Switch mode power supply fan cooled power supply - Manufacturer: Astec - Type: LPQ142 - Weight : 1 Kg N7Zxkoyjfd - optical condition according to photos - New without OVP was opened - functional Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods in question. Jwt9nu

Condition: new, Model Name Un3Ucjf8Qp TITAN 660 - 2000

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Drevar Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25