Baler

Avermann AVOS 1410 B-37/70

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. E2Qbtum Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Dqj8Jt Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2020, Channel baler Baler Manufacturer: Avermann Type: AVOS 1211-22/60 Year of construction: 2020 Filling chute cross-section: 1,200 x 1,100 mm Bale size: 1,100 x 700 mm Bale length: adjustable Bale weight up to approx. 500 kg Zod7Gpb Tying: 4-fold vertical Pressing force: 600 kN Drive power: 22 kW Suitable for paper, cardboard, packaging film LxWxH = 5,800 x 1,800 x 3,000 mm Weight: 8,500 kg

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Press container manufacturer Avermann year of construction 2008 with lifting/tilting device 400V 50Hz 25amp. 4,0kW B2O9Dhipra 5,000kg tare weight 15,000kg permissible total weight 20m³ usable volume One roller is defective or blocked and could be replaced (Fig. 8). The press container is sold without warranty.

Condition: used, Year of construction: 2016, machine/vehicle number: 20686, Year 2016 Bk33Tlsblky Wet press 5,5kW 25A 3 x 400V.N.PE.50Hz permissible total weight 15,000kg max. operating pressure 200bar

Condition: excellent (used), Heraeus B 6120 70°C P30Ugydl Heating cabinet Drying cabinet

Mileage: 122,515 km, power: 125 kW (169.95 HP), first registration: 05/2014, overall weight: 7,000 kg, fuel type: diesel, color: white, axe configuration: 4x2, maximum load weight: 1,608 kg, empty load weight: 5,392 kg, tire size: 225/75R16, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, Condition: used, front tire size: 225/75R16, rear tire size: 225/75R16, number of seats: 3, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), hydraulics, onboard computer, sliding door, soot filter, traction control, trailer coupling, Iveco Daily 70.170 E6 with Time France access platform - Work platform type: Time France VDT-170-F - Hydraulic drive - Max. working height: 20m - Rotation 315° - Max. Basket load: 200 kg, 2 persons - Control from the basket or with the remote control - ABS - Driver airbag - Central locking with remote control - 6-speed gearbox - Electric windows and mirrors - Tires: 225/75R16 First-hand vehicle, in very good technical and optical condition. All CE certificates, COC documents and UVV tests available. TÜV full approval according to §21, UVV test for the workman basket and German approval available on request for an additional charge. Iveco Daily 70.170 E6 with aerial work platform KLUBB - Working platform type:Time France VDT-170-F - Hydraulic drive - max. working height: 20 m - Rotation 315 Bsgjkfas07O - Max. Basket load: 200 kg, 2 person - Control from the basket or with the remote control - ABS - Driver airbag - Central locking with remote control - 6-speed gearbox - Power windows and mirrors - Tyres: 225/75R16 Vehicle from first hand, in very good technical and optical condition. All CE certificates, COC documents and UVV tests available. Iveco Daily 70.170 E6 avec nacelle élévatrice Time France VDT-170-F - Nacelle élévatrice Type : KLUBB K42P - Entraînement hydraulique - Hauteur max. hauteur de travail : 20 m - Rotation 315°. - Max. Charge du panier : 200 kg, 2 personnes - Contrôle depuis la nacelle ou avec la télécommande - ABS - Airbag conducteur - Verrouillage centralisé avec télécommande - 6-gearbox with vitesses - Lève-vitres et rétroviseurs électriques - Tires : 225/75R16 Véhicule de première main, en très bon état technique et visuel. Tous les certificats CE, documents COC et contrôles UVV disponibles. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Year of construction: 2015, Manufacturer: Lange Maschinenbau Type: B 70 K Used machine Condition: very well maintained because little in use Year of construction: 2015 Equipment: Machine table with 13 rollers for better workpiece guidance Edge feed, synchronized with the belt feed Edge thickness adjustable via digital counter Pneumatic roller separation with knife (for cutting edges) Three pressure rollers Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick rubber pad to protect the workpiece. Digital counter for height adjustment Direct glue application to the workpiece: glue tray with leak-proof glue supply from below and fast heat-up time after machine standstill Flush trimming unit for the front and rear edges of the workpiece, automatic scanning on the workpiece, pneumatic trimming with knife for cuttable edges Flush trimming unit with vertical scanning and horizontal guidance, reproducible setting by means of digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4000 to 18000 rpm, trimming cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm, Automatic height adjustment of the upper cutter with the belt feed Continuous workpiece support approx. 1800 mm long, workpiece support rail, approx. 300 mm extendable Rotatable foil plate Ø 800 mm Technical details: Workpiece width min. approx. 80 mm Workpiece thickness 10 50 mm Workpiece length min. approx. 220 mm Edge thickness 0.4 2.0 mm Roller cutting max.1.0 x 55 mm, 2 x 45 mm Heating capacity glue pot2.7 kW Electrical connection 400V, 50 Hz , 3Ph + N Total connection 3.8 kW Heating time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensions approx. 1800 x 700 x 1300 mm without foil plate Ø 800 Net weight approx. 260 kg Location: Hochheim Urep8Y2L2Z Availability: Immediately

Condition: new, AC motors FY 70 B-4 three-phase motor SN:526/13068K03 ,unused, 100% functional, scope of delivery as per photos Dpssix

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier Scn0L9Aohx -Manufacturer: DETA, charger type E220 G24/70 B-FT -Input voltage: 220 V 50 Hz -Power: 24 V/70 A -Dimensions: 550/410/H780mm -Weight: 79 kg with pallet

Condition: good (used), Year of construction: 2002, Functionality: fully functional, power: 45 kW (61.18 HP), Full briquetting line, consisting manual feeding unit for bunker. Feeding bunker. Press.Control cabinet. Cooling line, Briquett cracking to length. Second same briquetting press as spare. Bohsihr0Dis

Condition: like new (used), Functionality: fully functional, Newly arrived! We can offer you this top incubator / heating cabinet type B 5028 of the world brand "Heraeus" from federal stocks. The B 5028 is characterized by its particularly precise temperature control and minimal energy requirements and, due to its almost indestructible quality / design, is virtually indispensable in any laboratory. Thanks to its extremely compact design, it fits ideally as a table-top unit even in the smallest corner and can be connected electrically almost anywhere - power consumption only 180 watts! The minimum temperature deviations comply with DIN 58945 Sheet 1, and the appliance also has a timer, fresh air supply and overload/temperature protection. The appliances offered here are all from stock and have never been used - all components are in mint condition and undamaged - see pictures. The delivery takes place in a special wooden box, including power cable and operating instructions. Technical data: Temperature range 10-70 degrees External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity approx. 28 liters DIN 12880 part 1 and 2 tested Protection class 1 IP 20 Temperature monitor according to DIN 12880 class 3.1 Shelves: 2 Dm7Ozp Weight: approx. 30 kg Shipment will be made within three working days of receipt of payment by a forwarding agent - you can of course also collect the appliance from us during regular opening hours. The total weight of the system including accessories and pallet is approx. 60 kg. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Mileage: 59,083 km, power: 110 kW (149.56 HP), first registration: 06/2017, overall weight: 7,000 kg, fuel type: diesel, color: white, axe configuration: 4x2, maximum load weight: 2,628 kg, empty load weight: 4,372 kg, tire size: 225/75R16, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, Condition: used, front tire size: 225/75R16, rear tire size: 225/75R16, number of seats: 3, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), hydraulics, onboard computer, sliding door, soot filter, traction control, trailer coupling, Iveco Daily 70.150 E6 with Klubb aerial work platform 8Frgmixnm - Work platform type: Klubb K42 - Hydraulic drive - Max. Working height: 14.8 m - Rotation 315° - Max. Basket load: 200 kg, 2 persons - Control from the basket or with the remote control - ABS - Driver airbag - Central locking with remote control - 6-speed gearbox - Electric windows and mirrors - Tires: 225/75R16 First-hand vehicle, in very good technical and optical condition. All CE certificates, COC documents and UVV tests available. Iveco Daily 70.150 E6 with Klubb aerial work platform - Work platform type: Klubb K42 - Hydraulic drive - Max. Working height: 14.8 m - Rotation 315° - Max. Basket load: 200 kg, 2 persons - Control from the basket or with the remote control - ABS - Driver airbag - Central locking with remote control - 6-speed gearbox - Electric windows and mirrors - Tyres: 225/75R16 First-hand vehicle, in very good technical and optical condition. All CE certificates, COC documents and UVV tests available. Iveco Daily 70.150 E6 avec nacelle élévatrice Klubb - Nacelle élévatrice Type : Klubb K42 - Entraînement hydraulique - Hauteur max. hauteur de travail : 14,8 m - Rotation 315°. - Max. Charge du panier : 200 kg, 2 personnes - Contrôle depuis la nacelle ou avec la télécommande - ABS - Airbag conducteur - Verrouillage centralisé avec télécommande - 6-gearbox with vitesses - Lève-vitres et rétroviseurs électriques - Tires : 225/75R16 Véhicule de première main, en très bon état technique et visuel. Tous les certificats CE, documents COC et contrôles UVV disponibles. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and is no substitute for detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Year of construction: 2018, *Sale price-valid until 30.11.2024* Manufacturer: Lange Maschinenbau Type: B 70 K Used machine Year of construction: 2018 Machine up to 100 mm gluing height ! Equipment: Machine table with 13 rollers for better workpiece guidance Edge feed, synchronized with the belt feed Edge thickness adjustable via digital counter Pneumatic roller separation with knife (for cutting edges) Three pressure rollers Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick rubber pad to protect the workpiece. Digital counter for height adjustment Direct glue application to the workpiece: glue tray with leak-proof glue supply from below and fast heat-up time after machine standstill Flush trimming unit for the front and rear edges of the workpiece, automatic scanning on the workpiece, pneumatic trimming with knife for cuttable edges Flush trimming unit with vertical scanning and horizontal guidance, reproducible setting by means of digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4000 to 18000 rpm, trimming cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm, Automatic height adjustment of the upper cutter with the belt feed Continuous workpiece support approx. 1800 mm long, workpiece support rail, approx. 300 mm extendable Rotatable foil plate Ø 800 mm Technical details: Workpiece width min. approx. 80 mm Workpiece thickness 10 100 mm Gzjxmkjuj Workpiece length min. approx. 220 mm Edge thickness 0.4 2.0 mm Roller cutting max.1.0 x 55 mm, 2 x 45 mm Heating capacity glue pot2.7 kW Electrical connection 400V, 50 Hz , 3Ph + N Total connection 3.8 kW Heating time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensionsapprox. 1800 x 700 x 1300 mm without foil plate Ø 800 Net weight approx. 260 kg Location: NRW Availability: Immediately

Condition: used, Memmert B 60 Drying oven Heating oven up to 70°C Bniunaykdue

Year of construction: 2014, Condition: used, Scrubber dryer Hakomatic B 70 CL battery 24 volt Dlrcn7

Year of construction: 2004, Condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, Timetronic ECO JH charger -Type: D400 G 24/70 B-ETIS -Input voltage: 400V 50-60Hz -Power: 24V/70A Rznr93Ls -Dimensions: 500/500/H730 mm -Weight: 55 kg

Condition: good (used), Heavy duty column drill with NC controlled STYLE cross table and drilling cycle incorporated into control of table. C0D8Hqisvg Spindle take-up ISO-40

Condition: good (used), Internal dimensions: 600 x 600 x 600 mm Max. Temperature 70°C Qjm7R

Condition: used, Scrubber drier, floor cleaning machine, mopping machine, control -Manufacturer: Gansow, control uP mos control from scrubbing machine 70 BF 70 -Type: B 24/35-70A Ctm8Jc0Kt7 -Voltage: 24 V -Number: 3x control available -Price per piece -Dimensions: 160/125/H30 mm -Weight: 0.4 kg

Condition: used, fuel type: electric, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type Timetronic E230 G 24/70 B-ET PLUS Cjlwzt87Lw -Input voltage: 230V 50-60Hz -Power: 24V/70A -Number: 1x charger available -Price per piece -Dimensions: 500/500/H730 mm -Weight: 54 kg/pc.

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor 9Ffmeah7Yl -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm -Weight: 26 kg

Condition: new, B&R automation interface module X20 CS 1070 ( X20CS1070 ) Rev. H0 Condition / Zustand DE: unused in original packaging EN: unused in original packaging F3I89Oh

Condition: as good as new (ex-display), B&R automation analog input module 7AT324.70 Zustand / Condition DE: unused in original packaging B8Whdftr EN: unused in original packaging

Condition: as good as new (ex-display), B&R Mobile Panel 7100 7.0" ( 5MP7140.070N-000 )Rev. F0 7Fkvifr   State / Condition  DE: unused, in original packaging EN: unused, in original packaging