Construction machinery

Avant Tecno Oy 220

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2023, operating hours: 450 h, Kohler diesel engine 57 HP, AS profile 320/60-12 HD tires, parallel guide, Opticontrol, anti-slip valve, LED work light 700 lumens, municipal package, rear side weight set 180 kg, lashing eye on rim 4x, TÜV certificate, pallet fork 1200 mm, standard bucket 1300 mm Drbzer

Condition: good (used), Functionality: fully functional, Year of construction: 2022, operating hours: 315 h, Kubota diesel engine 33 kW/44 hp, AS tires 26x12.00-12, parallel guide for hydraulic lift arm, Opticontrol, vibration damper, work lights LED 700 lumen, municipal package ROPS, rear side weight set 180 kg, lashing eye rim 4 x, anti-slip valve, TÜV certificate, pallet fork 1200 mm, standard bucket 1300 mm capacity 300 l Ui7Wdzwev7

Condition: new, Year of construction: 2023, operating hours: 1 h, Tires: 23*10.50-12 AS profile Parallel guide for lift arm (hydraulic) Level compensation Anti-slip valve Joystick, 6-fold function Work lights on ROPS bracket (LED, 700 lumen (2 front, 1 rear)) Rear side weight set 180 kg Opticontrol (switch kit) Municipal package TÜV certificate Cyekmo9D7A 4 lashing eyes on rim (mounted) Standard bucket 1150 mm (capacity: 260 l with straight edge) Pallet fork 1200 mm

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2023, operating hours: 130 h, Kohler diesel engine 57 HP, AS tires 380/55-17, lashing eye on rim 4 pieces, work light on ROPS bracket 700 lumen, vibration damper, rear side weight set 180 kg, rear fender, municipal package, Opticontrol switch KIT, anti-slip valve, TÜV certificate, pallet fork 1200 mm, standard bucket 1600 mm, capacity 460 l Dq92Op

Condition: ready for operation (used), Year of construction: 2020, operating hours: 417 h, Basic device: with water-cooled Kubota diesel engine 10.5 kW/14 HP and electric motor 230 V - battery main switch - hydraulic drive, gradient 50% (27°), max. travel speed 2.6 km/h - hydraulic emergency lowering switch in the basket and on the ground - 3-part, hydraulic lifting arm - max. working height 19000 mm - max. platform height 17000 mm - max. lateral reach 9700 mm (120 kg) - max. lateral reach 8300 mm (230 kg) -Basket size 1330x750 mm -12 V socket in the work basket -Work basket swivels 90° (45° right, 45° left) -Boom swivels 360° -230 kg basket load with overload warning -can be set up to an incline of 22% (13°) -Transport dimensions: length 5050 mm, width 1330 mm, height 210 mm -Support dimensions: 3780 x 3830 mm -Operating weight: 2660 kg -Paint finish green -Basic machine with CE certification equipped with. - Tractor profile 23 x 10.50-12 - 3-stage drive, max. speed 5.2 km/h Zk3E7Yqgy - Manual control for machine and boom - Green plastic pads for the larger sliding plates - Empty hose line from the ground to the basket for compressed air or water - 4 flashing lights on the support boom - LED work light on the control panel - Electric rotation of the work basket +/- 45° - Electric emergency lowering in the work basket and on the ground - External battery poles - Double socket 230 V in the work basket - 230 V (110 V) electric motor 2.2 KW - Paint finish RAL 6018 green/RAL 7016 gray - Paint finish on the work basket yellow/black warning foils Support plates 500 x 500 mm with anti-slip rubber coating

Condition: used, The Mitutoyo Avant Contracer is a high-precision contour measuring device for precise measurements of profiles, edges, and surface textures. It is used in quality control and manufacturing to ensure accurate measurement results. The device is used, but tested and fully functional. Specifications: Measuring range: Depends on model (details upon request) Accuracy: High-precision contour measurements for industry and manufacturing Area of application: Quality control and production metrology Condition: Used, tested, and fully functional Cbhzabervm Scope of delivery: Contour measuring device including accessories

Condition: used, mileage: 7,840 km, power: 147 kW (199.86 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2022, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, second-hand vehicle warranty, soot filter, New price ¤ 53,295 net * 100A Synthetic leather * 101A Synthetic leather - black / anthracite * 14U Smartphone integration package * 16U Smartphone integration Apple CarPlay * 17U Smartphone integration Android Auto * 19A * 1B3 Communication module ECE version * 1U9 Tax code light rear axle load level * 218 Rear view camera * 229L Germany * 234 Blind spot assistant * 235 Active parking assistant * 243 Active lane keeping assistant (camera) * 249 Interior and exterior mirrors automatically dimmable * 255 BMb-Mobilo with DSB and GGD * 258 Collision warning with active braking intervention FCW-Stop * 260 Type plate on rear lid - omitted * 287 Through-loading option * 2A1 * 2S0Package - Multimedia/Digital Content * 2U1Radiator blind * 2U8Alternative refrigerant * 2XXLFederal Republic of Germany Brmcy3P7Drw * 30PStorage package * 310Double cup holder * 325Center airbag * 332BLanguage instrument cluster/HU - German * 33UTeletronic services plus * 345Rain sensor * 351Ecall emergency call system * 355Preparation for navigation retrofit * 365Hard disk navigation * 367Live traffic capability * 383Communication module Ramses Entry (4G) * 3A2 * 3R5Winter complete wheel -LM 10-double spokes 17" * 3V7Speed/load index 94Y * 421Automatic 9-speed transmission * 440Cruise control * 464Instrument cluster display M * 475Tire pressure monitoring (RDK) * 500Electrically folding exterior mirrors * 502Multi-year free map data updates * 513Traffic sign recognition * 51BRating country set EURO-NCAP * 521Connect 20 Mid (NTG7) * 537Digital radio standard DAB (Digi. Audio Broadc.) * 541Double roller blind for luggage compartment cover * 550Trailer hitch * 580Air conditioning * 587Logo projection via mirror * 58UDoof lining fabric gray * 5A1 * 5S8Exhaust system with 3-sensor package * 632LED headlights static right-hand traffic * 651Winter wheels fitted * 677Avantgarde/standard chassis * 6A4 * 6P5Sales tax code for code 475 requirement * 6U7Diesel exhaust gas purification BlueTEC SCR Generation 4 * 70BWinsurance vest - driver * 725Roof rails in chrome look * 794Center console plastic FIM Diamant (2C10) * 79BPreparation for digital radio standard DAB * 7A9 * 7B4WIPPS countries WEU+COC * 7U2Seat type variant 2 * 803AEJ X2/1 * 840Dark tinted glass * 868Central display size L * 873Seat heating for driver and front passenger * 876Interior lighting package * 890Automatic rear door * 891Ambient lighting premium * 893KEYLESS start * 8B2PTC auxiliary heater 48V * 8U8I-Size marking (Isofix successor) * 8X3AEJ 22/1 * 916Fuel tank with large capacity - volume 1 * 927Exhaust gas purification Euro 6 technology * 94BIntegrated starter generator Gen.2 * 969COC paper Euro 6 technology - with registration certificate part 2 * 972Exhaust system with DPF generation 2.0 * 986Different VIN with model year * 992USelenite gray - metallic paint * 998Tax code conversion WLTP with RDE * A162 * A176 * A190 * AA5Base performance variant * B0148V technology * B51TIREFIT * B59Drive program selector switch (Agility Select) * D1F * D1P * D2I * D2K * F206Series 206 * FSCombi car * G011 * GAGetransmission automatic * GI * H50Decorative elements - plastic FIM diamond (2C10) * HAHRear axle * JVNFactory tax code * JWDFactory tax code * K06Engine power class under 151kW * K13Control code for service interval 25000 km * K37Deactivation of closing feedback via Fanfare * LLeft-hand drive * L3ESport steering wheel - smooth split leather * M20Displacement 2.0 liters * M654R4 diesel engine OM654 * P14Equipment line/packa

Condition: used, Functionality: fully functional, machine/vehicle number: 6559559, Year of construction: 2018, operating hours: 3,810 h, load capacity: 2,200 kg, fuel type: electric, construction height: 1,310 mm, fork length: 1,585 mm, drive type: Elektro, Low lift truck Chassis number: 6559559 Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 375Ah Battery year of construction: 2020 Description: Toyota LPE220 No.: R0370 Year of construction: 2018 Operating hours: 3810 The device is visually and technically in very good condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. C0L9Jygwmm

Condition: excellent (used), Year of construction: 2019, Roundness testing machine Fab. Mitutoyo type Roundtest RA 2200 AH Year 2019 Technical data Make Mitutoyo Type Roundtest RA 2200 AH Year of construction 2019 Control Roundpak Measuring diameter 300 mm Measuring depth 85 mm Measuring range Z 500 mm Rotation deviation 0.02 + 3.5H / 10000 μm 18°C - 2 Cjxvnizgyy IKZ + 20 °C +/- 2 °K Rotation speed 2, 4, 6, 10 rpm Max. Workpiece weight 30 kg Dimensions: L 1000 x W 1200 x H 550 mm Weight: 200 kg Equipment - Centering chuck - measuring arm - monitor - Dell computer - Machine documents All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: like new (used), Brand: PEMAMEK OY Model: 60 TS Dqvkdp Power: Three-phase 380V Idle turner + motorized turner Diameter range (Minimum - Maximum): 900 - 5200mm Translation for motorized turner movement Type: Self-aligning Control with movement control and regulator for speed variator Weight: 1990kg

Condition: new, power: 16 kW (21.75 HP), Year of construction: 2021, operating hours: 21 h, total length: 3,050 mm, front tire size: 23x10-50-12, rear tire size: 23x10-50-12, wheelbase: 1,080 mm, ground clearance: 170 mm, construction height: 2,016 mm, engine type: Kubota D902-EF03, drive type: Diesel, load capacity: 790 kg, construction width: 1,110 mm, net weight: 1,080 kg, front tire type: Kenda, rear tire type: Kenda, - Standardbereifung 23x8.50-12”grass/TR - Kraftübertragung Hydrostatischer Fahrantrieb - Schubkraft 700 kp - Fahrgeschwindigkeit 12 km/h - Hydrauliköltank, Füllmenge 26 l - Hydraulikölspezifikation ISO VG 46 - Zusatzhydraulik 34 l/min 185 bar Dqp8Kt - Wenderadius innen/außen 880 / 1970 mm - Hand-Arm-Vibration, Total < 2,5 m/s² - Ganzkörpervibration, max. < 0,5 m/s²

Year of construction: 2013, Condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: Dqj8Cx The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Year of construction: 2005, operating hours: 120,000 h, Condition: ready for operation (used), General Data Measurements height 1670 mm Control Unit Brand Fanuc Model Series 21i-TB Main Drive Spindle speed range 6000 / 8000 rpm Spindle bore 45 mm Number of axis 2 Movement X-Axis Movement 300 mm X-Axis Feed Force 12 m/min Z-Axis Movement 285 mm Z-Axis Feed Force 20 m/min Ur2Lbtgobd Media Air pressure 0.4 MPa Additional Equipment Standard chuck: Precision air chuck Tool Table This TECNO WASINO G06 lathe was manufactured in 2005. It is equipped with a Fanuc controller and operates on a 200V, 3-phase system with a main breaker capacity of 50A. Designed for turning applications, it ensures reliability with a main air pressure of 0.4 MPa. This machine tool provides robust performance for precision machining tasks. The TECNO WASINO G06 machine we have for sale is an excellent opportunity for enhancing your production capabilities. Contact us for more information. Application Types Turning

Condition: excellent (used), CATALOGUE NUMBER 6651 TECHNICAL DATA - max. width of the processed element 220mm - max. height of the processed element 120mm - 4 spindles: 1) horizontal lower 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 input rollers, pulling, toothed, including 2 double - 1 output roller, pulling, smooth, rubber, from above - rubber output roller, pulling from below - pneumatically pressed rollers - feed on Cardan shafts - feed motor 1.1kW - lifting motor 0.37kW - electric adjustment of planing thickness - length of the feed plate 1980mm - side pressure - smooth regulation of feed speed 8-16m/min - central lubrication - diameter of the exhaust port 5x140mm - closed in the cabin C7H7Vlakm - dimensions length/width/height 3400x1500x1700mm - weight approx. 1670kg Net price: PLN 39900 Net price: EUR 9380 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: reconditioned (used), Functionality: fully functional, Roundlog rotor debarker, incl. centering infeed conveyor, hydraulics, min log diam 8 cm, rotor opening 450 mm, equipment for sale with 6 month warranty time Drdln7

Condition: good (used), Year of construction: 2018, operating hours: 2,336 h, color: green, Field of application: Construction Mast: articulated arm Bj8A0Lwzger Working height: 1.900 cm Technical condition: good Visual appearance: good EPA Marked: yes Delivery terms: EXW Production country: FI Please contact Vink Machinery for more information Avant Leguan 190 * 2018 * Diesel and 230 volts * 2336 working hours * 19 meters working height * 9.8 meters horizontal range * 230 kg lifting capacity * 4x4 * 2660 kg own weight * including documents

Condition: new, Functionality: fully functional, Year of construction: 2008, fuel type: electric, color: grey, overall weight: 27,000 kg, total height: 4,050 mm, total length: 9,500 mm, total width: 3,700 mm, machine/vehicle number: P3928, Autoclave for laminating glass. HOT AIR AUTOCLAVE FOR GLASS GLASTON 3200-7 The autoclaving process is a key process in the production of laminated glass. During the autoclaving process, the various layers of glass and special films are pressed together. In the process, the air pockets that can be found between the glasses after the pre-lamination are pressed out. The glass is clearly transparent after autoclaving process This autoclave was specially designed to process high volumes and may be used on automotive windshield production, laminated glass sheets and also can be used for other industries like compound materials, food processing, tyre recovery process and others. This autoclave is new but never installed because a change on our business plan. Uy3O0Sdtcj Includes controls, cars and tables for feeding product. Condition: Never used, never installed.

Condition: used, For sale is an almost new bale opener line from a paper recycling plant for the production of ‘fluff pulp’ (long-fibre cellulose) from unmixed paper and cardboard production waste. The entire system was newly installed in 2021 and unfortunately never went into production. In 2024, the final decision was made to dismantle the entire system technology and sell parts of it. The resulting bale opener line only ran for approx. 2 hours in set-up mode after installation and never went into production. The system was designed for a throughput of 20 tonnes of fluff pulp per hour. Technical data on the used bale feed conveyor: Manufacturer Bollegraaf Recycling Solutions B.V. Type HBT 1400/1200 * 12500 - 0° (chain belt conveyor) Overhaul of the conveyor belt in 2021 Operating hours after overhaul approx. 2 hours Effective width 1200 mm Belt length 10,150 mm Drive power 3 kW, the belt speed of the motor can be regulated via a frequency converter Belt speed 1.6 - 5.5 m/minute Belt type 250/2, 3+1, thickness 6.1 mm, the belt is without carrier Technical data for the bale opener and dewiring unit: Manufacturer Cross Wrap OY Type DW 1400 dewiring unit Year of manufacture 2021 (new machine) Operating hours approx. 2 hours (exclusively set-up operation by the manufacturer Cross Wrap) Min./max. permitted bale dimensions: Height min. 700 mm, max. 1400 mm Width min. 700 mm, max. 1400 mm Length min. 1100 mm, max. 2500 mm Bale weights min. 250 kg, max. 2000 kg Bale materials Paper, cardboard, plastic films, plastics, pulp and various other recycling materials Throughput capacity up to 60 bales per hour, depending on material Remark: The bale opener and dewrapper is a new machine, built in 2021 and was operated exclusively by the manufacturer Cross Wrap for approx. 2 hours in set-up mode. The system works fully automatically. Bales are held on the infeed conveyor belt by two hydraulically operated grippers. The bale opener follows the contour of the bale and automatically cuts through the wrapping film and the steel or plastic bale wires with a hydraulically driven, rotating knife. The hydraulically driven gripper system holds the film with the steel or plastic bale wires and pulls them out sideways after the opening process. Finally, the wires and film are wound into small coils via a winding unit and ejected into a box via a side chute. Once the bale has been opened and the film and wire removed, it is discharged into the storage bunker with a dosing drum using a conveyor belt. It is then broken down into several pieces. Dqj8Db Remark: The feed hopper with dosing drum (drumfeeder) is used, built in 2014 and was overhauled in 2021. After the overhaul and assembly, the conveyor belt has only been in operation for approx. 2 hours in set-up mode. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: SO151001, sheet thickness (max.): 3 mm, cutting length (max.): 1,500 mm, lateral stop: 1,000 mm, warranty duration: 36 months, Equipment: documentation/manual, Electric guillotine shear ShearOne E1500x3 Dq88O9 CoastOne - Made in Finland Electric guillotine shear ShearOne 15 - Made in Finland 1500mm x 3mm TC15 touchscreen control - Sheet metal holding - Automatic cutting gap adjustment

Condition: excellent (used), Four side planer KP5-220 made in Taiwan max planing width 230mm Zm0Igzel max planing height 130mm 2 sliding rollers in the tabletop number of spindles 5 motor of the fifth spindle is mounted on the floor feed on cardan shafts with smooth adjustment fully adjustable spindles machine works quietly without vibration, checked in very good condition, chrome tops

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Electric drive logs stepfeeder, 4 steps, electric panels Drcszz

Year of construction: 2016, Condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Carvraon

Condition: good (used), Year of construction: 2001, Circular saw Manufacturer: SCM - Tecno Max Type: Formula S35 Year of construction: 2001 Carriage length: 3.200 mm Cutting width: 1,270 mm Cutting height: approx. 103 mm Saw blade diameter: Max. 350 mm Power: 5.5 kW Scorer: Yes Hifupnzm9 Motor brake: Yes Speed: 4,000 rpm Weight: approx. 800 kg

Condition: used, 5 available. Little used Nakkila Works Oy approximately 601,000 litre stainless steel (1.4162 & 1.4307) vertical mixing vessels. Last used as fermentation vessels. Dq2Egf Unit measures approximately 6,800mm diameter x 16,550mm straight side. Unit has welded dished top and welded cone bottom heads. Manufactured in hygienic design. Internal rated atmospheric working pressure at 35 deg.c. External is insulated and clad. Includes side entry stainless steel agitator with drive/motor. Vessel is mounted on stainless steel skirt.

Condition: used, 4 available. 79Bqryjnw Little used Nakkila Works Oy approximately 601,000 litre stainless steel (1.4162 & 1.4307) vertical mixing vessels. Last used as Hydrolysis reactors. Unit measures approximately 6,800mm diameter x 16,550mm straight side. Unit has welded dished top and welded cone bottom heads. Manufactured in hygienic design. Internal rated atmospheric working pressure at 50 deg.c. External is insulated and clad. Includes top entry stainless steel agitator with Sulzer drive and 45kw motor. Vessel is mounted on stainless steel skirt.