Construction machinery

Avant M 423

Condition: new, power: 16 kW (21.75 HP), Year of construction: 2021, operating hours: 2 h, total length: 3,050 mm, front tire size: 23x10-50-12, rear tire size: 23x10-50-12, wheelbase: 1,080 mm, ground clearance: 170 mm, construction height: 2,016 mm, engine type: Kubota D902, drive type: Diesel, load capacity: 790 kg, construction width: 1,110 mm, net weight: 1,080 kg, front tire type: Kenda, rear tire type: Kenda, Construction machinery Avant M 423 Drive Diesel Year built 2021 Dqp8Nx Lifting weight (kg) 790

Condition: new, INA x M-rail + V-rail + needle cage SN 42369-133 SET M6535x600 F-325147 87 K1203, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Dmwvwt

Condition: excellent (used), Mobile Shredder Type WR 3000 M B8Q9Zqjvrq It can be used for many type of waste and biomass. - good condition - well maintained - the shafts are in condition like new - with star screen

Condition: used, Year of construction: 2012, Hot air heater used Year of construction 2012 with forced-air heating oil burner (tested according to DIN 4794) suspended version Nominal heat output: max. 120 kW Hot air output 9200 m³/h Fuel type: heating oil Operating mode: cycling essentially consisting of: Sheet steel housing, double-walled, with insulation, galvanized, combustion chamber made of heat-resistant special steel with heat exchanger, radial fan with three-phase motor output 2.2 kW, forced-air heating oil burner Double-walled insulated stainless steel chimney with cleaning opening Control cabinet with selector switches with digital controller with timer approx. 20 m additional duct with vertically and horizontally adjustable ventilation grilles incl. Volume flow control 4 heat recovery ventilators with differential temperature control (infinitely adjustable) Cxojmcrxoo Availability: short term Storage location: Hagen, NRW

Condition: new, Year of construction: 2024, Functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Mq8H2Qsr Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: excellent (used), Year of construction: 2008, We have a complete screen printing studio for sale. The little-used carousel has a mileage of only 470,000 prints. Equipment well maintained, serviced on a regular basis. M&R Sportsman EM 1210 screen printing machine. M&R Mini Sprint M 2000 gas oven with long belt (7 m). Inter-operation dryers M&R Red Chili 1 pcs. Canfywz2Xy M&R Reno 2 pcs. 1pcs. - and 2 pcs. Tri loc screen quick fit system. Device for applying glue to countertops M&R Anamister Screen printing frames Roller Newman system approx. 90pcs Tensioning table sitsystem Roller Newman Strain gauge device for measuring the stretching force of sieves M&R Kool Mist countertop cooling device M&R Turnabout paint mixer

Condition: good (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg B9Srtsztj0 Power supply: 380V

Condition: good (used), Year of construction: 2011, Hioki 3154 Digital M Hitester Manufacturer: Hioki Japan Type: 3154 Digital M Hitester Year of manufacture: 2011 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. Clxa38X9Dc - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. Please contact us if you have any questions or would like to arrange a viewing. Thank you for your interest.

Condition: excellent (used), Mobile Shredder Type WR 3000 M It can be used for many type of waste and biomass. - good condition - well maintained - the shafts are in condition like new Drgbzl - with star screen

Condition: good (used), Year of construction: 2020, HM-T NC Anglemaster Automatic Push Fed Crosscut Saw For Straight & Angle Cutting A completely automatic upstroke saw specifically designed for the accurate cutting of both straight and angled timber components. The rotation of the sawblade is NC controlled and operates very quickly and accurately. The machine has applications in all areas where there is a requirement to cut at angles. Applications include:- Timber frame housing, Garden products, Decking, and any other applications requiring the cutting of angles. In addition the machine operate as a standard upstroke crosscut for straight cutting. The machine operates by pushing the boards to the correct position using an integral NC pusher before automatically operating the saw. he crosscutting saw consists of: sawing machine with 60° rotation 6000 mm capacity infeed (overall length 8000mm) 4000mm outfeed table Sawing machine specifications: 7.5 hp motor 550 mm saw blade diameter, HM-Z option 700mm blade 160 mm maximum sawing height, HM-Z option 250mm maximum sawing height Dretfz maximum noise level 81 dB Pusher specifications: Positioning accuracy 0.1 mm 65 m/min maximum speed AC motor with toothed rack, controlled by a frequency regulator steel guide with adjustable Linear bearings Computer specifications: Industrial computer with colour monitor 1.2 Gb hard disk and USB & ethernet connections H&M developed software using Windows Touch Screen operation Outfeed monitor to display cut sizes and references General: The software allows for on site creation and storage of sawing lists. Sawing lists may also be created during work preparation. They can then be loaded into the machine’s computer from USB key or via ethernet connection. Creating sawing lists is very simple. The software’s graphic interface allows the selection of a specific beam model, upon which the relevant measurements are keyed in. The measurements may be entered in various ways, depending on which system is used during work preparation. The 1.2 Gb hard disk used allows for permanent storage of hundreds of sawing lists. An onboard optimisation package is included which allows cutting lists entered or imported to be test optimised against timber lengths to generate an pre-optimised cutting list. This includes one import routine from external design package. An optional external software package, Optimaster is also available, for importing of cutting lists from multiple software packages, such as Excel, BTL DDS, Consultec, HSB, Sema, Vertex, Cadworks & Dietrichs. This package includes stock control, full optimisation and automatic download to any number of saws. Year - 2020 CE Available - End May

Condition: new, Functionality: fully functional, ADMA100 A-M Connecting rod cap and face grinding machine - new machine Technical details: 1 Phase 220V - 50 Hz Max. outside dimension of cap: Φ 275 mm Max. thickness of the connecting rod: 100 mm Motor power: 0,75 Kw L x W x H: 920 x 750 x 350 mm Dq0Ohl Packing dimensions: L x W x H: 1360 x 890 x 620 mm Net weight: 150 kg Gross weight: 180 kg If you are interested, please contact me! More machines for sale: A-M, Serdi, Comec, AMC, Carmec, Kwik-Way, Serdi, PEG Crankshaft grinding, surface grinding, valve grinding, valve seat milling, pressure testing, parts washing, line boring, valve guide presses, vacuum tester

Year of construction: 2007, Condition: used, Dimensions (LxBxH): 100 x 181 x 175 cm - Year: 2007 - Documentation available: No B0F9Ztxc7A - CE mark available: Yes - Serial number: 100658 - Voltage [V]: 400V - Power [kW]: 8kW - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight: 1240kg - Transport packages: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2000, operating hours: 15,036 h, Machine is available immediately, if you are interested please contact us and arrange a viewing appointment Drgdkd

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, total width: 25,000 mm, total length: 100,000 mm, total height: 12,500 mm, Modular lightweight hall 25 m wide and 100 m long; steel structure ready for assembly; new film available from manufacturer within a few weeks; B8Qylc7Bpa

Condition: like new (used), Year of construction: 2000, Functionality: fully functional, throat depth: 150 mm, pressing force: 2 t, overall weight: 200 kg, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Conrxiquue Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: excellent (used), Functionality: fully functional, The following item is for sale: - Our offer number: 3/129 4/129 - Spectrometer + combination lamp 2 devices in a set - Manufacturer: J&M Analytik Ciweq8B0My - Type: Tidas-E PK/Teval/S + LDH 703010 - Serial number: 920925030 921028033 - Power: 230 V - Dimensions: WxDxH 530 x 430 x 180 mm - Weight :1 device 15,6 Kg 2 device 16,5 Kg - optical condition according to photos - used - functional - shipping in 2 packages Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Jwt9nu Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods available.

Condition: new, Year of construction: 2025, Functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Kz37Wuic Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 2002, Condition: used, - Year: 2002 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dq7Csn Glenn Smeets

Condition: good (used), Year of construction: 2007, Good condition B7Jlkx22H3

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Drfogz Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: refurbished (used), Year of construction: 1964, Functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade fair lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes overhauled. All machines were taken apart down to the last screw. Drfnvt Here is a run through of a general overhaul at our company: 1. Machine cleaning, dismantling of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and wedge strip 4. Scraping of the guide surfaces: spindle, slide, cross support and tailstock to geometric positions according to the accuracy protocol 5. Replacement: screw with nut, wedge strip and Multifix-Multifix base body for cross support (including 2 turning tool cassettes) 6. Complete dismantling and replacement of the necessary spare parts in the lock case, thread box, spindle box, gear box, tailstock, cross and upper support 7. Installation, if necessary replacement of racks, repair of lead and feed spindle 8. Complete bearing replacement in all machine components 9. Complete replacement of machine plates 10. Priming of the machine, sealing, grinding, polyurethane top coat and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, wiring and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance in the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck protection with limit switch - Front chip protection slide mounted - Rear chip protection - Cover of the lead and feed spindle - Brakes after emergency stop within 2 s

Condition: used, Functionality: fully functional, In this offer you buy a used textile printer ‘Brother GTX-423 Pro’ Object of sale: 1 x Brother GTX-423 Pro with the following equipment: Bxdzqsro8U incl. rollable stand Year of manufacture 2021 Counter readings: Total: Approx. 1,001 prints Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing) may be present. The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2024, Functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Dqwetj Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 1,208 h, Functionality: fully functional, Model: 4000M trailer Brand: M&J Year of manufacture: 01.2022 Diesel: CAT Equipment: - 8 Samurai blade tables - Overband magnet - P30 pumps Drez89 - Heating system for hydraulic tank - 12.5 liter engine - Reacton Dual System Operating hours: 1,208 hours

Condition: new, 21.25 m² storage platform incl. stairs, railings on two sides, top edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm Drfodb - Plus 200 mm overhang of the floor covering - Supports, stairs, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, OK natural & UK white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x Chipboard - 01 x Stairs, 37° incline - Approx. 8.25 running meters Railing - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5026,00 € net 5980,94 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.