Telehandler / Telescope Forklift

Ausa T144H

Condition: new, Year of construction: 2024, Drive: Wheel Chassis type: rigid Make of engine: Kubota V-1505 Top speed: 20 km/h General condition: very good Technical condition: very good Visual appearance: very good EPA Marked: yes Please contact Pieter de Vries (+31 184615552, +31 638327575, ) for more information Sftuepzzm2

Year of construction: 2013, Operating hours: 1,800 h, Condition: used, General information Field of application: Construction Weights Gpbwlw Empty weight: 2.600 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Max. working load: 3500 kg Rental currency: EUR Additional information Please contact Kris Bauwens for more information

Condition: used, Year of construction: 2024, Operating hours: 10 h, Mast type: triplex, Construction height: 2,770 mm, Total length: 4,610 mm, Drive type: Diesel, Load capacity: 5,000 kg, Construction width: 2,010 mm, Net weight: 7,710 kg, Mast type: Triplex Technical condition: New 08Zlllea STANDARD EQUIPMENT - Open FOPS cab - Tiltable cab with tilt support - Safety belt with sensor monitoring - Seat with presence sensor - Rotating headlights - Audible reversing alarm - Emergency stop button - Hill Holder - Hill start assist - Rear-view mirror - Adjustable, ergonomic seat - Tilt and depth adjustable steering wheel - Joystick for full control of all main functions - Armrest - Second generation FullGrip® (4x4) - Limited slip differential on front axle - Inching pedal - ECO Mode system - Digital display - Diesel filter with water separator - Negative brake FORK - Fork 1.200 mm - Fork carriage plate 1,660 mm type FEM IV - Integrated sideshift

Year of construction: 2006, Operating hours: 6,224 h, Condition: good (used), DUMPER AUSA D2001, YEAR 2006, Sblsgukuh7

Color: red, Year of construction: 2013, Operating hours: 2,155 h, Condition: used, Field of application: Construction Bimn2Gverur Empty weight: 4.000 kg Make of engine: Kubota V2403 Please contact Sales Department for more information

Condition: used, Year of construction: 2015, Operating hours: 8,497 h, Mast type: standard, Lifting height: 3,700 mm, Free lift: 100 mm, Construction height: 2,730 mm, Fork carriage width: 1,710 mm, Fork length: 1,500 mm, Engine type: Kubota V3600-T, Drive type: Diesel, Load capacity: 5,000 kg, Construction width: 1,990 mm, Net weight: 8,350 kg, All-terrain forklift Load center: 600 Fork width: 200 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Hydrostat Condition: Reconditioned without warranty Technical condition: Very good Bmg08Vpbxy Front tires Type: Pneumatic Front tires Size: 18-19.5 16PR Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 10.0/75-15.3 14PR Rear tires Condition: 80 - 100% Description: Half cab with heating, working lights front + rear, indicators, rotating beacon, 3rd + 4th valve to fork carriage, joystick Sideshift, integrated sideshift 3rd valve, 4th valve, rear working lights, front working lights, semi-cab, heating, joystick, rotating beacon, windshield wiper, seat,

Condition: used, Year of construction: 2020, Operating hours: 2 h, Field of application: Internal logistics General condition: very good Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Gol2Ew Please contact Pieter de Vries (+31 184615552, +31 638327575, ) for more informationruwterreinheftruck

Condition: used, Operating hours: 1,562 h, Power: 75 kW (101.97 HP), Fuel type: diesel, Color: other, Equipment: Air Conditioning, Additional options and accessories Bogqmfu3Z30 Heater Remarks Additional information : For more visit also our website TIPPER Total weight 5000 kg Empty weight 2535 kg Four wheel drive Four wheel steering Box inside 1800-1300-300 mm 6206 km 1562 working hours Tyres lafetover 80/80% TOTAL NETO PRICE 15900 EUR.- Priit Palatu EST,ENG,RUS,GER Peep Poderat EST, ENG Keio Kütt EST,ENG Valdur Rootsma EST,ENG,RUS,FIN Juhan Rootsma EST,ENG,RUS,NOR,SWE Rolf-Otto Rootsma EST,ENG Traction type : 4WD More information Type: Garden and park vehicle, Year of construction: 2017, Empty weight: 2.500 kg, Serial number: UA1M481H048176828

Condition: used, Year of construction: 2024, Mast type: triplex, Construction height: 2,770 mm, Total length: 4,610 mm, Drive type: Diesel, Load capacity: 5,000 kg, Construction width: 2,010 mm, Net weight: 7,710 kg, Mast type: Triplex Technical condition: New Rvuomp8H3D STANDARD EQUIPMENT - Open FOPS cab - Tiltable cab with tilt support - Safety belt with sensor monitoring - Seat with presence sensor - Rotating headlights - Audible reversing alarm - Emergency stop button - Hill Holder - Hill start assist - Rear-view mirror - Adjustable, ergonomic seat - Tilt and depth adjustable steering wheel - Joystick for full control of all main functions - Armrest - Second generation FullGrip® (4x4) - Limited slip differential on front axle - Inching pedal - ECO Mode system - Digital display - Diesel filter with water separator - Negative brake FORK - Fork 1.200 mm - Fork carriage plate 1,660 mm type FEM IV - Integrated sideshift

Year of construction: 2017, Condition: good (used), Vehicle description Telescopic loader AUSA T 307 H YEAR 2017 lt. Counter 8.832 hours 3 tons lifting capacity 7 meters lifting height 63 KW Kubota turbo engine only 2,07 meter headroom only 2,02 merer overall width - incl. grapple bucket - incl. earth shovel - incl. pallet fork - hydr. quick coupler - 3rd circle to fork carriage - all wheel - 3 steering modes - joystick operation 9Tboh2Dtyp - immediately ready for use - original paint - road registration NL Selling price: 32.950,-- net Also favorable delivery possible !!!

Condition: used, Year of construction: 2023, Fuel type: diesel, Field of application: Internal logistics Number of valves: 3 Isvobum General condition: very good Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Pieter de Vries (0184615552, +31 638327575, ) for more information Additional options and accessories - 3rd valve

Condition: used, Operating hours: 2,156 h, Power: 75 kW (101.97 HP), Fuel type: diesel, Color: other, Equipment: Air Conditioning, Additional options and accessories Heater Remarks Additional information : For more visit also our website TIPPER Total weight 5000 kg Empty weight 2535 kg Four wheel drive Four wheel steering Box inside 1800-1300-300 mm 15734 km 2156 working hours Rzarkkmrex Tyres lafetover 80/80% TOTAL NETO PRICE 11900 EUR.- Priit Palatu EST,ENG,RUS,GER Peep Poderat EST, ENG Keio Kütt EST,ENG Valdur Rootsma EST,ENG,RUS,FIN Juhan Rootsma EST,ENG,RUS,NOR,SWE Rolf-Otto Rootsma EST,ENG Traction type : 4WD More information Type: Garden and park vehicle, Year of construction: 2017, Empty weight: 2.500 kg, Serial number: UA1M481H048176797

Year of construction: 2014, Condition: good (used), Vehicle description Telescopic loader AUSA T204H year 2014 lt. Counter 5.899 hours 4,2 meters lifting height 2 tons lifting capacity only 2.03 meters headroom only 1.60 meters overall width 36,5 KW Kubota engine - incl. new pallet fork !! Lwmfqqdl3 - incl. bucket - hydr. quick coupler - all wheel - 3 steering modes - jostick operation - immediately ready for use ! Selling price: 25.900,-- net also favorable delivery possible !!!

Year of construction: 2007, Condition: ready for operation (used), Vehicle description Diesel all-wheel drive dumper AUSA D600 AHG year 2007 acc. Counter 1.667 hours 60,5 KW Kubota engine 6.000 KG Payload 4.380 KG Own weight 215cm overall width All wheel Joystick control Rotating trough Selling price: 16.500,-- net Gmclsqm Also favorable delivery possible !!!

Power: 75 kW (101.97 HP), Color: orange, Tire size: 225/75 R 17,5, Year of construction: 2012, Operating hours: 350 h, Condition: used, Tire condition: 95 %, Front tire size: 225/75 R 17,5 | 95%, Rear tire size: 225/75 R 17,5 | 95%, Maximum speed: 80 km/h, Equipment: All Wheel Drive, Cabin, Tires (v):225/75 R 17.5, Tires (h):225/75 R 17.5, Operating hours:350, First registration:2012, Control unit - Double acting (1x), Control unit - Single acting, Single lever control unit (electronic), Implement carrier, Hydrostatic drive, Cab suspension (mechanical), Radio_____Ausa Multiservice implement carrier M 350 H 4x4 Full Grip2.0 tdi VW engine CommonRail, Euro 5 with EEV, 74 KW / 102 PSMASCHINE IS SOLD AS A BASIC VEHICLE!RUNS ON 3 CYLINDERS ONLY AND HAS NO ENGINE OIL PRESSURE! MACHINE IS NOT DRIVABLE- Three-sided tipper long - with quick-change frame - implement carrier plate - air conditioning - jaw & ball hitch - ABS - AUSA FullGrip systemFront attachment plate: 1,800 kg lifting capacity, joystick control lift-lower, right-left, additional switch for float position and hydraulic circuit. Brakes: Front hydraulic servo brake with front disc brakes. Rear drum brakes, ABS, EBD Tires: 225/75R 17.5 Empty weight: 3,045 kg Payload: approx. 3,500 kg Perm. GGw: approx. 6,545 kg Trailer load: 3,500 kg braked Trailer load: 750 kg unbraked Length: 4,427 mm Width: 1,750 mm Outer edge of mudguard Height: 2,230 mm without rotating beacon 2,390 mm with rotating beacon Wheelbase: 2,160 mm Outside turning circle: 7.998 mm - 4x4 drive Tipper Internal dimensions: LxWxH 2,540 x 1,650 x 400 mm similar to Bonetti, Multicar, PfauYou will find our entire used offer under Subject to prior sale! The spreader shown can be purchased as an option and is not included in the price.Used delivery items are sold under exclusion of liability for material defects. This does not apply in the event of intent or gross negligence or in the event of injury to life, limb or health,Storage location:94491 Hengersberg Bith8Rirj0N

Condition: as good as new (ex-display), Year of construction: 2018, Operating hours: 4,867 h, Functionality: fully functional, Total height: 2,190 mm, Total length: 1,660 mm, Total width: 2,250 mm, Type of input current: three-phase, Input voltage: 400 V, Operating hours of spindle: 1,950 h, Used exclusively in the showroom for tool development (production of sample tools), no series production, only 1950 spindle hours Machine with automation and 6-fold tool changer and NumRoto software in a complete package with all necessary accessories and peripherals (grinding wheels, oil unit, HSS magnetic separator, extraction system with filter, fire extinguishing system,...). It is connected and ready for operation, can be disconnected and shipped immediately. Inspection possible in Munich. Iswd87A Equipment: U-Grind basic machine Calibration kit Grinding wheel measuring probe Tool probe Cooling channels probe Automatic tool support Guide system holder Accessories ISO50 Clamping cutters Automatic SCHAUBLIN SRS collet chuck Collet kit SCHAUBLIN mm Grinding wheels mandrel Ø20x40 Grinding wheels mandrel Ø20x81 Grinding wheels mandrel Ø20x100mm Dressing wheels mandrel Kit Robot EVO + Robot control unit Double gripper robot, hard Robot pallet C,Ø10mm,150 WZ (OPTION) Fire extinguishing system Air barrier for air filter ARO cooling system ARO HSS magnetic separator External air filter Software package - EXPERT NRplus Differential Twist NRplus In-process measurement NRplus NUMROTO-Draw NRplus Additional Hardlock NRplus data interface

Condition: excellent (used), Used stainless steel container / transport container Item number: 10507 Containers are completely emptied. Final use: food Manufacturer: Hausach / Ucon Volume: 900 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Bjotlkyqhd Design: Single wall bottom: pressed with outlet bead Topsoil: Vaulted Operating pressure according to type plate: 0.10 bar Tank dimensions: total width: 1000mm total length: 1200mm total height: 1450mm Tare weight: approx. 225 kg materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes Manhole cover 455mm with clamping ring inner diameter outlet: 38mm Discharge valve: Disc valve

Condition: good (used), Type / Model: 57U Bocdemaa7Yh Center distance: 680 mm Tip height: 125 mm Longitudinal movement: 500 mm Table: 1,030 x 214 mm Transverse feed: 280 mm Height adjustment of grinding spindle head: 300 mm Swivel range of the sanding table: +90° / - 45° Swivel range of grinding spindle head: 350° horizontal / 360° vertical Grinding wheel diameter: 250 mm Spindle speeds: 2,250 / 3,000 / 4,500 / 6,000 rpm Connection: 1.5 kW Accessories/equipment: 2-axis digital display Condition: good Defects: Main motor grinding wheel does not start when switch is in position 1. When switching to position 2 and back to position 1, the drive runs. Hydraulics only work partially. Weight: t Dimensions: mm

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Bi8Yqkcpkn Outlet Type: Disc valve Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Vsshxe Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Condition: used, Standard configuration Trumpf material number 1481541 - el. equipment conversion kit complete VF 1424 Upphuq0097

Condition: used, Machine/vehicle number: D955Z8001, R902433778, MOOG double pump RKP80 + AKP18- removed from running machine - removed from Arburg 420 C 1000-250 - fully functionalmanufacturer: MOOG type: RKP80, AKP18 manufacturer no.: D955Z8001 (RKP80), R902433778 (AKP18) spare part no.: 223507 O29Nqn8U0 type code: HZ-R18A1-RKP080KM20R2Z00DS1, A10VS0 18 DFR1/31R-PRA12KB2-S1893 Dition: used

Power: 42 kW (57.10 HP), Axe configuration: 4x4, Year of construction: 2005, Operating hours: 4,535 h, Condition: used, Equipment: All Wheel Drive, Field of application: Construction Upiy3Nen0R Empty weight: 7.490 kg Please contact Emal Jaweed for more information

Condition: excellent (used), 1 x Sausage roll line, 3,4,5,6,8 variable, Complete with burgess calibrator with flour duster 4 and 6 lane marker and cutting discs., Water tank and water sprayer, 6 lane and 4 lane manifold for meat filling,6 lane forming box, Pastry guides, 4 lane forming box, Rinc servo driven guillotine, main Control panel. Located Wiltshire Fzjfwmg

Condition: good (used), Year of construction: 2013, Vemag Sausage Linker Lucky-LINKER from Vemag is a small, economical, multifunctional vacuum stuffer. Vemag double screws are the heart of the filling device. They can handle large solid particles without damage, so that the best possible final product is obtained. The entire pumping system is made of corrosion-resistant materials. Most importantly, the double screws are made of stainless steel, which ensures a long service life and accurate portioning. Vemag’s LUCKY-LINKER will easily produce all types of fresh and cooked sausages in natural, collagen and cellulose casings. Vemag Sausage Linker will be shipped with the following equipment: Twisting Gear 170-0-070; Holding Device 937500019/0326; Turn off the filling pipe 18/14; Fill Tube Straight 20/30; MANUFACTURER Vemag MODEL Sausage-Linker/ Lucky Linker TYPE vacuum stuffer with dosing gun POWER SUPPLY 400V POWER 4,5 kW EFFICIENCY 2000 kg/h HEIGHT 170 cm WIDTH 70 cm LENGTH 85 cm WEIGHT 290 kg HOPPER CAPACITY 45 liters PORTIONS 1- 99,999 grams / up to 320 servings per minute Ucmgov3Tmr YEAR 2013