AUSA ruwterrein C 11 M

AUSA ruwterrein C 11 M

Condition: new, Year of construction: 2024, lifting height: 4,000 mm, fuel type: diesel, power: 23 kW (31.27 HP), lifting capacity: 1,350 kg, net weight: 2,400 kg, Drive: Wheel Chassis type: rigid Make of engine: Kubota V-1505 Top speed: 20 km/h General condition: very good Technical condition: very good Visual appearance: very good EPA Marked: yes Bik88Lrz Please contact Pieter de Vries , , ) for more information

Condition: used, Year of construction: 2015, operating hours: 8,497 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 100 mm, mast type: standard, construction height: 2,730 mm, fork carriage width: 1,710 mm, fork length: 1,500 mm, engine type: Kubota V3600-T, drive type: Diesel, construction width: 1,990 mm, net weight: 8,350 kg, All-terrain forklift Load center: 600 Bmg08Vpbxy Fork width: 200 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Hydrostat Condition: Reconditioned without warranty Technical condition: Very good Front tires Type: Pneumatic Front tires Size: 18-19.5 16PR Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 10.0/75-15.3 14PR Rear tires Condition: 80 - 100% Description: Half cab with heating, working lights front + rear, indicators, rotating beacon, 3rd + 4th valve to fork carriage, joystick Sideshift, integrated sideshift 3rd valve, 4th valve, rear working lights, front working lights, semi-cab, heating, joystick, rotating beacon, windshield wiper, seat,

Condition: good (used), Year of construction: 2023, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, lifting capacity: 2,500 kg, Field of application: Internal logistics Number of valves: 3 General condition: very good Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Pieter de Vries (0184615552, , ) for more information Additional options and accessories Bshaw8Cx3Yw 3rd valve

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Dpfkx7 Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: new, Design: el.hydr. / movable cylinder pressure force: 100 t working width: 1100 mm table: 1100 x 300 mm piston stroke: 380 mm drive: 2,2 kW Weight: 970 kg Poh7Btb7M

Condition: used, Year of construction: 1961, grinding length 4000 mm grinding width 1100 mm workpiece height 1100 mm total power requirement kW weight of the machine ca. 21 t dimensions of the machine ca. m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine Dqutrj aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden!!!

Condition: new, Design: el.hydr. / movable cylinder pressure force: 160 t working width: 1100 mm table: 1100 x 380 mm piston stroke: 400 mm drive: 3,0 kW Weight: 1195 kg Bwf0Nyvqie

Condition: used, Year of construction: 1996, Functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Dqvljt

Condition: used, Transformer, transformer, converter, three-phase autotransformer -Input: 220 V -Output: 29.5 V 17 A. -(technical data see photos) -Number: 2x available -Price: per piece Lo9Dd -Dimensions: 140/120/H120 mm -Weight: 12 kg

Condition: excellent (used), Here we offer you a TPS Blue-M temperature convection oven. TPS Blue-M temperature convection oven Blue M 7780 Specifications Temperature range: 15 ° C above ambient temperature up to 704 ° C Internal dimensions W x D x H: 25cm x 20cm x 20cm External dimensions W x D x H: 51cm x 38cm x 72cm Cladding dimensions W x D x H: 68cm x 48cm x 77cm Electrical power: 380V 3 phase 50 Hz CW-7780 has 8 shelf positions on 2" centers Frasen extractor hood, stainless steel version, without extractor/fan Type: CW-7780-JY-MP550 Condition: gebraucht / used Bb7938Tbub Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7048-10-M Heraeus Vötsch temperature test chamber water-cooled Performance data: With temperature change rate of 10 K/min Test chamber dimensions Height 950 mm Width 800 mm Depth 650 mm External dimensions Height 2025 mm Width 1000 mm Depth 2480 mm Temperature range -70°C to + 180°C Temperature deviation in time ± 0.3 to ± 0.8 Temperature homogeneity in space ± 0.5 to ± 2 Temperature change rate cooling 10 K/min Temperature change rate heating 10 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 480 liters 2x side passage ∅ 125 cm Cabinet is water-cooled Test room lighting: Halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 17 kW Nominal current: 30 A Refrigerant: R-404 A / R-23 Drf3Vt Weight: approx. 1250 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 Bsezgvy7Wi3 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Bsdq078Unho Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: reconditioned (used), Chocolate refiner year 1998 rollers overhauled in 2017 Dqufwf

Condition: excellent (used), overall weight: 24 kg, total length: 580 mm, total width: 300 mm, total height: 230 mm, Indramat servomotor MAC 090C-0-KD-2-C/110-A-0 Cvemtwds

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press Bwwpgzgfp2 -Manufacturer: Flutec, hydraulic unit from injection molding machine Battenfeld BA 600 CDC -Type: PT-350 / 4.0 / M / FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1 / 31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430 / H350 mm -Weight: 152 kg

Condition: excellent (used), CTS Type: CW-40/30 CTS climate chamber climate test cell Water-cooled (was converted to R-452a) Floor area approx. (W x D x H): 2800 x 6830 x 2620 Test room approx. (W x D x H): 2500 x 5825 x 2300 O38U2Hd0Vp Test room volume: 30 m³ Temperature tests: Temperature range: -40°C to +130°C Temperature deviation ± 1 K over time Average temperature change rate without heat radiation measured in the supply air Heating: 1 K/min Cooling: 1 K/min from +95°C to -30°C Climate tests: Temperature range: +10°C to +95°C Humidity range. 10% to +95% r.H in the dew point range: +5°C to 89°C Temperature deviation ± 0.5 K over time Humidity deviation ±1- ±3% r.H over time Nominal voltage: 400V +6/-10% 3/N, PE, 50 Hz Nominal power: 80.9 kW Nominal current: 126.6 A Refrigerant: R-452a Weight of test cell approx. 4079 kg Weight of machine set: approx. 409 kg Weight of control cabinet approx. 255 kg Weight of condenser approx. 612 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 0Ua3Vi87 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: used, Gear motor, electric motor Lib82 -Speed: 89 rpm -Power: 0.3 kW -Construction: B14 angle -Diameter shaft: mm -Protection class: IP 65 -Weight: 10 kg

Year of construction: 1991, Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from injection molding machine Battenfeld Bkwkfkty -Type: PT-350/2.3/M/ FL 83 -Motor: ABB 11 kW / 1455 rpm -Individual components: see photos -Dimensions: 980/610 / H490 mm -Weight: 184 kg

Condition: new, overall weight: 11,600 kg, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Drhfil

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Machine-Details: Drgvk9 Stock-No. 1022-H08995 Type of machine Ram-Type Floor Boring and Milling M/C Make SKODA Type W 180 Year of manufacture 1995 / retrofit 2017 Type of control CNC Storage location France Country of origin Czech republic Delivery time Immediately Freight basis Ex site, loaded on truck Technical details: spindle diameter 180 mm x-travel 10500 mm y-travel 4045 mm Control Heidenhain iTNC 530 Additional information: Spindle diameter 180 mm X axis travel 10500 mm Y axis travel 4045 mm Z axis travel 1250 mm W axis travel 1000 mm (spindle) CNC Rotating table IOS 40, size 3500 x 3000 mm V axis travel 2230 mm (rotating table) Max. table load 40 t Equipment: Floor plate dimensions 6000 x 3800 mm Three manual milling heads Three right angular plates Tool tapers

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Technical details workpiece diameter 500 mm workpiece weight 300 kg workpiece height 400 mm total power requirement 18 kW dimensions of the machine ca. 2500 x 2700 x 2800 mm Additional information ELB high-precision rotary table surface grinding machine Machine comes from a plant closure. Equipment: Magnetic rotary table diameter 600 mm Coolant system with paper belt filter With NK grinding program The NK grinding program enables the quick and optimal processing of workpieces with different processing dimensions. Depending on the workpiece to be processed, you can choose between a face and plunge grinding cycle. An attached measuring system with 0.001 measuring accuracy records the grinding wheel feed and controls the automatic grinding cycle with its subsequent electronics. This consists of different adjustable feed sizes of the grinding wheel. Deactivation of the feed when the target size of the workpiece is reached, adjustable spark-out time, return of the wheel and the machine table to the starting position. The dressing amount of the grinding wheel is automatically compensated and shown in the digital display of the Y-axis. The wheel wear caused by grinding is compensated during dressing. Roughing amounts 0.002-0.03 mm Cakbgb9Mwa Finishing amounts 0.001-0.015 mm Sparking strokes Z-axis 0-15 mm Lifting amount optionally 0-2.8 mm or back to starting position Electronic handwheel switchable for B-Y-Z axis Machine cover with manually operated sliding door for loading and unloading Technical data: Grinding diameter 500 mm Grinding height 400 mm Table load 300 kg Rotary table speed 20-80 rpm. Y-axis vertical adjustment of the grinding wheel Feed max. 300 mm/min. Displacement measuring system incremental rotary encoder, resolution 0.001 mm Z-axis transverse adjustment of the grinding wheel Automatic transverse travel max. 330 mm Transverse feed 4-1500 mm/min. adjustable Displacement measuring system incremental rotary encoder, resolution 0.001 mm Grinding spindle head Grinding spindle drive 10 kW Grinding spindle speed adjustable via frequency controller Grinding spindle cone 60 mm Grinding wheel 400 x 100 x 127 mm Control cabinet Dimensions L1600 x H2200 x D500 mm

Condition: good (used), Year of construction: 1992, Functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Caj8Mu8Vfc Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details workpiece diameter 800 mm workpiece weight 1000 kg workpiece height 480 mm Control Siemens 840 Di total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2750 x 2590 x 2310 mm Accessories coolant equipment with paper band filter Additional information Machine comes from a plant closure Equipment: CNC control SIEMENS Sinumerik 840 Di Electromagnetic clamping plate Frequency converter (inverter) for changing the motor speeds Coolant system with paper belt filter Grinding wheel with flange Caj2Th77Ue Lighting of the work area Technical data: Largest grinding diameter 800 mm Rotary table diameter 600 mm Rotation speed 15-150 rpm Cross travel 550 mm Cross speed adjustable 0-8 m/1 Grindable height vertically 480 mm Grinding wheel speed 1500 rpm Grinding wheel dimensions diameter 400x60x127 mm Grinding wheel motor power 11 kW Hydraulic motor power 4 kW Max. table load 1000 kg